Hopp til innhold

Axial 1041 Nylon Locknut 2.5 (10)

Art.nr: AXA1041

49,-

Axial

Axial

** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Kunder kjøpte også

Traxxas 9762 Rebuild kit, GTM shock (o-rings, spacers, bladders, bottom caps) (renews 2 shocks) Replacement part for these models: TRX-4M 1/18 Ford® Bronco® TRX-4M 1/18 Land Rover® Defender®

69,-

KJØP
This is a package of ten M2 Nylon Lock Nuts from Axial.     FEATURES Steel construction, black in color Nylon locking insert   INCLUDES Ten M2 Nylon Lock Nuts   SPECIFICATIONS Center Diameter: 2mm Hex Size: 4mm  

65,-

KJØP
This is the Differential Rebuild Kit for the Traxxas 1/16 scale VXL series. FEATURES: Nylon and rubber construction INCLUDES: Two Diff Gear Covers           Two Large O rings           Two Small O rings REQUIRES: Installation

39,-

KJØP
Oil, differential (100K wt) (0.7 oz (20cc)) Traxxas performance differential oils make it easy to increase or decrease the limited slip action of the gear differential by using higher or lower viscosity oil. Depending on the track conditions, altering the limited slip capability can enhance turning performance for faster exit speeds. FEATURES: 100K weight oil INCLUDES: 0.7oz  (20cc) bottle of oil w/ 1-1/2" pointed fill cap

99,-

109,-

Ikke på lager
-9%
The Advantage IQ801 is an easy to use NiMH battery charger. Plug it into the wall, connect the battery to the battery connector, wait for the LED to go out and you are done. Compact charger for NiMH batteries For batteries with 4-8 cells 1A charge current Tamiya plug  

199,-

KJØP
HPI  66655 - DRIVE SHAFT 6x65mm (2pcs) THIS PART FITS THE FOLLOWING KITS / PARTS: Savage XS Flux GT-2XS Savage XS Flux Ford F-150 SVT SAVAGE XS FLUX VGJR Savage XS Flux Chevrolet El Camino

139,-

KJØP
This is the 5x10x15mm Cup Joint for the HPI Savage XS Flux Vehicle. FEATURES Steel construction INCLUDES 5x10x15mm Cup Joint

89,-

KJØP
This is the 6x52mm Drive Shaft for the HPI Savage XS Flux Mini Monster Truck. FEATURES: Steel construction INCLUDES: 6x52mm Drive Shaft         (11)

79,-

KJØP
This is a pair of 5x40mm Axles for the HPI Savage XS Flux and Bullet Vehicles. FEATURES: Steel construction INCLUDES: Two 5x40mm Axles  

139,-

KJØP
These are 3x25mm Button Head Machine Screws w/hex drive                         for the REVO from Traxxas. FEATURES: Black steel construction INCLUDES: Six 3x25mm Button Head Machine Screws REQUIRES: 2mm hex wrench SPECS:    Length:  25mm           Diameter: 3mm

35,-

KJØP
This is a package of six 3x20mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x20mm button head screw is required INCLUDES: Six 3x20mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench

35,-

KJØP
This is the TQ 2.4GHz 3-Channel Micro Receiver                 for use with the Traxxas TQ 2.4GHz Transmitter. INCLUDES: TQ 2.4GHz 3-Channel Micro Receiver SPECS:    Dimensions: 1.05 x 1.5 x 0.43" (26.9 x 38 x 11mm)           Weight: 0.35oz (10g)

369,-

429,-

KJØP
-14%
This is the Front Hardened Steel Drive Hub for use on the Traxxas Slash 4x4. FEATURES: Hardened steel construction INCLUDES: One Drive Hub           One Screw Pin REQUIRES: Installation on the vehicle SPECS:    Length: 19mm (0.75")           Diameter: 12mm (0.47")

59,-

KJØP
These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles      such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits. FEATURES: Blue aluminum construction INCLUDES: Two hex hubs           Four axle pins REQUIRES: Assembly onto axles. SPECS:    Hex Length: 12mm (.47")           Hex Thickness: 6.1mm (.24")           Axle Pin Length: 9.6mm (.38") COMMENTS: These hubs could be used with other vehicles utilizing the same             pin/hex design.  These hubs Will Not work on the T-Maxx or E-Maxx.

109,-

KJØP
Body clips, heavy duty (black) (12)

39,-

49,-

KJØP
-20%
Traxxas TQi Telemetry Expander 2.0 and GPS Module 2.0 Conversion Kit! TRAXXAS TELEMETRY EXPANDER KIT (#6553X) FEATURES: Includes receiver data cable (optional data cables available) Installs quickly and easily; no parts to replace or swap Waterproof case keeps the expander safe from the elements Six available ports for connecting additional temperature and voltage sensors Uses GPS and GLONASS global positioning for accurate, real-time speed Speed readout not affected by gear ratio or tire-size Requires the TQi radio system with Wireless Module (#6511), TSM receiver (#6533), Apple device running iOS 7.0 or higher, or Android-equipped device with Android 4.4 and higher, and the Traxxas Link App (latest version available free on Google Play and the App Store) Expanded Innovation Traxxas telemetry changes the game by allowing you to monitor and record real-time data from your vehicle while you drive. The waterproof Telemetry Expander 2.0 includes the GPS Module 2.0 for the most accurate speed possible and accepts up to six additional auto-detectable sensors. The Traxxas Link app automatically recognizes sensors, so setup takes only a few moments! Advanced communication bus technology allows you to connect the telemetry expander to your TSM receiver or to your High-Voltage Power Amplifier, or directly to the VXL-6s and VXL-8s electronic speed controls with optional data cables. Install the Telemetry Expander, choose your sensors, and prepare for an all-new RC driving experience! Important Note The new GPS Module 2.0 (#6551X) and Telemetry Expander 2.0 (#6550X) replace the original Telemetry Expander (#6550) and GPS Module (#6551). The originals are not compatible with the new 2.0 versions.

1.549,-

1.695,-

KJØP
-9%
Høykvakitets Silicone demper olje med viskositet 550. En olje som gjør at o-ringer ikke går tørre. Meget bra kvalitet! 60ml flaske.

79,-

KJØP
This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

KJØP
-9%
 These are the Countersunk 4mm x 10mm Screws              for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction           Black in color INCLUDES: Six 4mm x 10mm Countersunk Flathead Hex Screws REQUIRES: Assembly onto Vehicle

35,-

KJØP
Pacer has designed this bottle of Threadlocker Compound to be        used on metal fasteners. It is not recommended for plastic parts. INCLUDES: One bottle of Pacer Threadlocker SPECS:    Size: 0.20 ounces (6ml) FEATURES: Medium strength general purpose thread locker           Locks threaded fasteners against vibration           Perfect for use in helicopters and all RC cars           Clean and dry parts for best results (removing grease, oil and dirt)           Parts can be returned to service immediately in MOST CASES           Thread locking compound comes in a Red bottle with a clear nozzle tip COMMENTS: This bottle of glue will appear big in context to the glue.  The             reason being is the glue requires a large amount of oxygen or the             glue will dry out.  All one would need to do once you have the glue             is shake the bottle and turn upside down, if the tip turns Blue             then the glue is present.  To some the bottle may appear empty.

59,-

Ikke på lager
These are 4mm Locking Nuts from Traxxas. FEATURES: Stainless steel construction.           Nylon insert. INCLUDES: 10 Lock Nuts SPECS:    Size:  4mm                       

30,-

KJØP
These are Replacement Washers from Traxxas. FEATURES: Black teflon construction.           Used on the axles and in the transmission. INCLUDES: (20) Washers SPECS:    Size:      5x8mm           Thickness: 0.5mm

29,-

KJØP
These are 3x6mm Washers from Traxxas. FEATURES: Metal construction INCLUDES: (12) Washers SPECS:    Size:  3x6mm

25,-

30,-

Ikke på lager
-17%
This is the Traxxas Flanged Nylon Locking Nuts. FEATURES: Steel serrated construction INCLUDES: Eiqht 4mm flanged nylon locking nuts SPECS:    Outside diameter: 7mm

39,-

Ikke på lager
This is a package of six 3x15mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x15mm button head screw is required INCLUDES: Six 3x15mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  15mm           Diameter: 3mm

35,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png