Traxxas

ANSMANN AAA RED LINE 5015553 4 PK - LR03

Art.nr: 5015553

29,-

Ansmann

På lager: 24

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Kvantum: 4 stk per pakke.

1.5 Volt per batteri.

Passer alle plasser hvor du kan bruke AAA-batterier.

Produsent

Ansmann

Kunder kjøpte også

Hovedbilde WLToys 284010 4WD Rally 1/28 RTR

Hovedbilde WLToys 284010 4WD Rally 1/28 RTR

WLToys 284010 4WD Rally 1/28 RTR

The WL Rally is a 1/28 scale 4WD RC car equipped with a brushed 130 motor and integrated 2-in-1 ESC/receiver unit. It features proportional throttle and steering control, independent front and rear suspension, and four-wheel shock absorbers for stable handling on various surfaces. The model includes LED lighting and all-terrain rubber tires for improved traction. Supplied RTR with rechargeable battery and USB charging cable. Specs: Scale: 1/28 Drive type: 4WD Motor type: Brushed 130 ESC: 2-in-1 ESC/Receiver unit Servo: 5g 3-wire Battery: 7.4V 400mAh Li-ion (included) Runtime: Approx. 20 minutes Charging time: Approx. 30 minutes (USB) Top speed: Approx. 30 km/h

895,-

995,-

-10%

Hovedbilde Traxxas 3752 Stub Axle Carriers (2)

Traxxas 3752 Stub Axle Carriers (2)

This is a pair of Stub Axle Carriers for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Molded nylon construction (black) INCLUDES: Two stub axle carriers REQUIRES: Installation on the vehicle

39,-

Hovedbilde Traxxas 3934 Body Clips (12)

Traxxas 3934 Body Clips (12)

Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction Natural polished color INCLUDES: Twelve Body Clips SPECS: Length: 26mm

39,-

Hovedbilde WLToys 2819 7.4V 1300mAh Lipo HardCase Deans

WLToys 2819 7.4V 1300mAh Lipo HardCase Deans

WLToys 7.4V 1300mAh Lipo HardCase Deans for WLToys 124010 Buggy og andre biler som bruker denne typen batteri. Spesifikasjoner Størrelse 118x35x30mm Vekt 100gram Balanseringskontakt XH Batteriplugg Deans

219,-

Hovedbilde Absima 1010043 LIPO 2S/7.4V 600MAH

Hovedbilde Absima 1010043 LIPO 2S/7.4V 600MAH

Absima 1010043 LIPO 2S/7.4V 600MAH

Lipo batteri beregnet for Absima Crawler 1:18 7.4V – 600mAh Lengde:48mm Bredde: 19mm Høyde: 16mm Vekt: 32gr

239,-

Hovedbilde Traxxas 5032 Silicon Shock Oil Premium 30WT (350cSt) ...

Hovedbilde Traxxas 5032 Silicon Shock Oil Premium 30WT (350cSt) ...

Traxxas 5032 Silicon Shock Oil Premium 30WT (350cSt) ...

Traxxas 30WT/350cSt Premium Shock Oil 60ml New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, the twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 30WT (350cSt) Bottle size: 60ml

99,-

109,-

-9%

Hovedbilde WLToys 244016 2WD Buggy 1/24 RTR

Hovedbilde WLToys 244016 2WD Buggy 1/24 RTR

WLToys 244016 2WD Buggy 1/24 RTR

The WL 244016 is a 1/24 scale 2WD RC Buggy equipped with an 050 high-speed carbon brushed motor and integrated gyroscope for enhanced stability. The model features full proportional throttle and steering with three selectable speed modes. Independent suspension improves handling across different surfaces. Additional functions include cruise control and a reserved socket for optional lighting installation. Supplied RTR with 7.4V Li-ion battery and USB charger. Specs: Scale: 1/24 Drive type: 2WD Motor type: 050 High-speed brushed motor Battery: 7.4V 350mAh Li-ion (included) Runtime: Approx. 20 minutes Charging time: Approx. 1.5 hours (USB) Speed modes: 15 km/h / 20 km/h / 25 km/h Control distance: Approx. 60 m Gyroscope: Integrated Included: RTR set with transmitter, battery and USB charger

695,-

795,-

-13%

Hovedbilde WLToys 124010 Buggy 1/12 4WD Exciting Orange

Hovedbilde WLToys 124010 Buggy 1/12 4WD Exciting Orange

WLToys 124010 Buggy 1/12 4WD Exciting Orange

WLToys 124010 Buggy 1/12 4WD Exciting Orange Rask Buggy som leveres komplett og har en toppfart på 50km/h! Bilen leveres med 4WD, et modulært 2s 1300mah LiPo batteri og kraftig børstemotor som gir ekstrem akselerasjon og toppfart. Levereres helt komplett med unntak av 4stk AAA-batterier til radio. PS! Produkt kan avvike fra video. Klippet er lagt til som relevant opplysning til produktet, men er ikke nødvendigvis identisk. Innhold i en produktvideo, testvideo eller et review kan avvike fra produktet som selges. Dette kan gjelde farger, spesifikasjoner, versjonsforskjeller, regionsforskjeller m.m. Det er produktets navn, beskrivelse og bilder du skal forholde deg til ved kjøp av varen. 1/12-skala Bilen er i 1/12-skala, en god kombinasjon mellom størrelse, vekt og ytelse. Drivaksler ut til hjulene er i metall og bilen har blant annet et modulært dempertårn og chassisdesign. Uavhengig hjuloppheng både foran og bak med kraftige dempere. Hastighet- og svingjustering er trinnløs og fjernkontrollen er på 2.4G så mange kan kjøre samtidig uten forstyrrelser. Denne versjonen har også kjølevifte til ESC og kjøleribbe til motor påmontert. Batteri og lading Bilen leveres med ett 2S 1300mAh LiPo-batteri med Deans-type kontakt. Batteriet er modulært og slides enkelt på plass i batterirommet. Det følger med lader til dette batteriet. Radio/Sender trenger 4stk AAA-batterier, dette må kjøpes i tillegg. Lader er av USB-typen og kan lade batteriet på ca. 2t timer. Ønsker man lader som kan brukes rett i stikkontakten hjemme, lader raskere og har kontroll på ladetid, spenning med mer så ligger det alternativ lader som tilbehør. Husk da også å kjøpe med deans-ladekabel og XH Balanseringsforlenger for 2S. Spesifikasjoner Lengde 347mm Bredde 211mm Høyde 122mm Motor Børste 560 ESC/Mottaker 2in1 børste Sender/Radio 2.4GHz (inkludert) Kjøretid Ca. 10-20minutter Ladetid Ca. 2t Rekkevidde 100m+ Skala 1/12 Vekt 935g m/batteri Innhold 1x RC Buggy 1x Radio 2.4GHz 1x Batteri 1x USB-lader 1x Manual 1x Vertøy

1.349,-

1.399,-

-4%

Hovedbilde WLToys 284161 Desert Buggy 1/28 - Komplett

Hovedbilde WLToys 284161 Desert Buggy 1/28 - Komplett

WLToys 284161 Desert Buggy 1/28 - Komplett

Komplett 30km/t 1/28 skala LED-lys WLtoys her med en mini desert buggy i skala 1/28! Denne modellen kommer med 4WD, børstemotor og et oppsett som klarer ca. 30km/t. Bilen er like stor som håndflaten, kommer med LED-lys i i begge ender og har en kjøretid på 15min. Leveres helt komplett med unntak av 4stk AAA-batterier. Genial liten pakke! Denne bilen er kanskje liten, men er utrolig stilig! Bilen har flereLED-dioder fordelt i fronten og bak. Desert Buggy passer perfekt til stuegolvet på kjipe regnværsdager der man trenger å ha det litt morro. Leveres på rallyhjul så kan også brukes ute. Ved hjelp av bilens 2s Lipo-batteri går denne lille rakkeren 30km/t som er merkbart på en så liten modell. Ladetiden vil også være på rundt 1t ved bruk av den inkluderte USB-laderen. Spesifikasjoner Lengde 175mm Bredde 94mm Høyde 55mm Motor 130 Size Sender/Radio Inkludert 2.4GHz Kjøretid 15min Skala 1/28 Lader USB Toppfart Maks 30km/t Innhold 1x WLToys Desert Buggy 1x Radio 2.4GHz 1x Batteri 1x USB-lader 1x Manual

895,-

995,-

-10%

Hovedbilde Tamiya 47431 Eunose Roadster (M-06)

Hovedbilde Tamiya 47431 Eunose Roadster (M-06)

Tamiya 47431 Eunose Roadster (M-06)

The Start of Something Beautiful Mazda’s Roadster – known as the MX-5 in other countries around the world – is a true hit design, with massive popularity across the globe. Its story began in 1989 with the appearance of the Eunos Roadster (NA), which won fans by the bucketful thanks to its perky design and performance. This is an R/C model assembly kit depicting that first generation Eunos Roadster, with a realistic polycarbonate body, stickers for decoration, and even masking stickers for use in the paint job. CHASSIS M-06 SKALA 1:10 DRIFT 2WD LEVERES SOM KIT MERKE TAMIYA DRIVKRAFT ELEKTRO ★The compact form of the hardtop Roadster is captured in style by a lightweight, durable polycarbonate body. ★Side mirrors are separately molded components developed especially for our R/C Roadster models. ★Black 8-spoke wheels are paired with treaded tires for a realistic look. Inner sponges are also included. Great RR Performance from the M-06 The M-06 chassis features a rear-mounted motor, rear-drive setup and features a longitudinally-mounted battery pack, with R/C equipment positioned on either side for optimum balance and a low center of gravity. 4-wheel double wishbone suspension uses black 8-spoke wheels, equipped with 60D radial tires at the front and 60D super grip tires at the rear. In addition, a 3-piece steering linkage offers nimble handling response. ★A three-piece steering tie rod ensures that the M-06 chassis has effective steering response. ★Friction dampers are an integral part of the double wishbone suspension, giving your car a ground-hugging drive. ★Three different wheelbase lengths are accessible by switching the position of rear section parts. ★Left: The rear-mounted motor, rear-wheel drive setup provides the model with excellent traction at the rear. ★Right: A close-up of the rear suspension. Separately sold pinion gears enable different gear ratios. Specifications ★Length: 390mm, Width: 176mm, Height: 121mm ★Wheelbase: 225mm ★Tread (F/R): 138mm ★Rear-Motor, Rear-Wheel Drive ★3-Bevel Differential Gear ★3-Piece Steering Tie-Rod ★4-Wheel Independent Double Wishbone Suspension ★F/R Friction Dampers ★Gear Ratio = 5.8:1 ★Tire Width/Diameter (F/R): 25mm/60mm ★Type 540 Motor ★Requires an Electronic Speed Controller (sold separately) Separately Required Items ★2-Channel R/C System w/ESC ★R6/AA/UM3 batteries for transmitter ★Battery pack & charger

1.695,-

Hovedbilde Tamiya 86022 PS-22 Polycarbonate Spray Racing Green 3 ...

Tamiya 86022 PS-22 Polycarbonate Spray Racing Green 3 ...

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-22 Racing Green). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable.

109,-

Hovedbilde Hitec 54404 Micro Switch Harness w/4 AAA-box

Hitec 54404 Micro Switch Harness w/4 AAA-box

Micro switch harness with 4 AAA Battery box

85,-

Hovedbilde Vapex AAA/R3 Batteri NiMH 850mAh 4-pack

Hovedbilde Vapex AAA/R3 Batteri NiMH 850mAh 4-pack

Vapex AAA/R3 Batteri NiMH 850mAh 4-pack

Rechargeble batteries, AAA. High power and enviroment-friendly Capacity: 850mAh/1.2Volt Normal charge: 15 hrs. with 80mA max. Must be charged before use.

99,-

Hovedbilde SkyRC MC3000 Charger 11-18V/4A

Hovedbilde SkyRC MC3000 Charger 11-18V/4A

SkyRC MC3000 Charger 11-18V/4A

UNIVERSAL BATTERY CHARGER & ANALYZER The World's Most Joyful Round Battery Charger The creation of this product arose from the desire to finally have a charger as versatile, accurate and powerful as a SkyRC hobby charger but tailored to a sweet battery tray for cylindrical single cell batteries; no more hassle with battery holders, fiddly wiring, clamps or similar DIY solutions. Multi-Chemistry Support 7+ battery chemistries Support 42+ battery sizes Powerful and Accurate NiMH / NiCd / NiZn / Eneloop: Charge current: Max. 3A (x4 slots) Discharge current: Max. 2A (x4 slots) Internal Accuracy** (calibrated w/ accurate calibration source) Voltage: < |±2mV| Current: < |±2mA| Li-Ion / LiLo4.35 / LiFe-P04: Charge current: Max. 3A (x4 slots) Discharge current: Max. 2A (x1 slot) Max. 1A (x4 slots) Display Resolution Voltage: 0.01V Current: 0.01A Effective Cooling The built-in aluminum cooler effectively dissipates heat generated in the inside of the charger to the environment, even at slow fan speed. Compact Display The 128x64 pixels screen shows 5 different views during operation, see above a picture of Total Overview (TOV). Rich User Interface Eight Buttons for easy programming and operation. Four Slot Number Buttons (SNB) help to address the different slots. The other four buttons are for programming and operation. Easy Programmability In Simple and Advanced UI modes, the charger operates off 30 user-defined operation profiles. The programs can be called up and run with few clicks, very conveniently. APP Control BLE 4.0 technique enables user to operate the charger and view real time data and graphs via mobile application.Secure Stand Rubber feet and strong tilt stand elements provide a firm stand. Tilted position enhances viewing angle and cooling air flow at the bottom side. PC Control User can use PC Link software to control the charger, view real time data with graphs, and also update the charger firmware through it. Specs: Input Power: DC 11-18V/4A Charge Current Range: 0.05-3.00A Discharge Current Range: 0.05-2.00A Max. Charge Power: 50W Max. Discharge Power: 15W Battery Chemistry Type: NiMH, NiCd, NiZn, Eneloop,Lithium-Ion, LiIo4.35, LiFePO4 Battery Capacity: 100-50000 mAh Operating Temperature: 0-40℃ USB Power Output: DC 5V/2.1A Dimensions (LxWxH): 200 × 124 × 69 mm Weight (Without DC Adaptor): 600 g

1.895,-

1.995,-

-5%

Hovedbilde BSD 903-011 Upper Susp. Arm Mount FR/RR

BSD 903-011 Upper Susp. Arm Mount FR/RR

Upper Susp. Arm Mount FR/RR

49,-

Hovedbilde Traxxas 6634 Motor CW/CCW Alias (2)

Traxxas 6634 Motor CW/CCW Alias (2)

NB: Dette er utgaven uten hull i motordekslet. This is the Motors for the Latrax Alias Quadcopter. FEATURES Red connectors on the clockwise motors Black connectors on the counter-clockwise motors INCLUDES Two clockwise motors Two counter-clockwise motors

479,-

Hovedbilde ANSMANN AA RED LINE 5015563 4 PK LR6

ANSMANN AA RED LINE 5015563 4 PK LR6

Kvantum: 4 stk per pakke. 1.5 Volt per batteri. Passer alle plasser hvor du kan bruke AA-batterier.

29,-

39,-

-26%

Hovedbilde Traxxas 1815 Body Washers (8)

Traxxas 1815 Body Washers (8)

This is the Traxxas replacement Body Washers. FEATURES: Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECS: Outer Diameter: 0.87" (22mm) Inner Diameter: 0.26" (6.7mm) INCLUDES: Eight large body mount washers

29,-

Hovedbilde Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector

Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector

This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery. FEATURES Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail Engineered specifically to fit Traxxas models New high current connector with gold-plated copper terminals and integrated balance connector iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings for specific battery MAXX cable high-efficiency 12 gauge silicone jacketed wire INCLUDES Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High Current Connector and Integrated Balance Plug REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus, LiPo charging bag SPECIFICATIONS Configuration: 3S1P Continuous Discharge: 25C (125A) Max Burst Rate: 50C (250A) Watt Hours: 55.5 Charge Rate: 1C (5A) Max Charge Rate: 2C (10A) Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm) Weight: 13.3oz (376g) COMMENTS ALWAYS use a LiPo-approved Charger ALWAYS use a LiPo Cell Balancer NEVER Charge over 4.20V per cell NEVER Charge at currents greater than 1C NEVER Trickle Charge NEVER allow to Discharge below 3.2V per cell NEVER disassemble or modify pack wiring in any way or puncture cells NEVER place on combustible materials or leave unattended during charging ALWAYS Charge in a fireproof location ALWAYS set charger's output volts to match battery volts ALWAYS keep out of reach of children

995,-

1.095,-

-9%

Hovedbilde RPM 80562 True-Track Rear End Kit for the Traxxas Revo ...

Hovedbilde RPM 80562 True-Track Rear End Kit for the Traxxas Revo ...

RPM 80562 True-Track Rear End Kit for the Traxxas Revo ...

True-Track Rear End Kit for the Traxxas Revo replaces stock Traxxas #5331, #5332 & #5334 Quick Notes: – fits both the Revo and e-Revo (does not fit the Revo 2.0) – replaces stock Traxxas #5331, #5332 & #5334 – 32 grams (1-1/8 ounces) lighter than stock components! – perfect rear toe angles – includes massive oversized bearings – matching Front Left & Front Right A-arms available – matching Front Axle Carriers available The RPM True-Track Rear A-arm Conversion Kit for the Revo eliminates some of the biggest headaches associated with toe link rear ends. Rear toe angles are nearly impossible to set accurately and there isn’t a gauge currently made that can accurately identify whether each individual wheel’s toe angle is set correctly in relation to the chassis. The RPM True-Track rear end kit completely eliminates the rear toe links, locking in the rear toe angle at a solid 1.5 degrees per side for a total rear toe-in angle of 3 degrees. By getting rid of the rear toe links, we’ve completely eliminated all rear bump steer! That means the rear toe angle remains consistent throughout the entire range of suspension travel, providing superior rear end tracking regardless of the terrain. Identical to our T/E-Maxx True-Track Kit, the Revo True-Track Kit retains the stock upper pivot ball in the new, ultra beefy RPM axle carrier to allow precise camber adjustments while the lower pivot ball has been eliminated in favor of a rock-solid 4mm diameter hinge pin that locks in the rear toe angles for race winning consistency (hinge pin replacement part #80970). All aspects of the RPM True-Track Conversion Kit have been beefed up for rugged durability and slop free movement throughout its range of travel. Additionally, we’ve incorporated our oversized bearings into the new RPM axle carrier design, providing an additional 2mm more bearing contact with the axle while doubling the bearing load rating & tripling the fatigue rating over the stock bearings. So does all this come at a cost of added weight? The RPM Revo True-Track Rear A-arm Conversion Kit actually weighs LESS than the stock components it replaces! How much less? 16 grams PER SIDE! That’s a total weight loss of 32 grams or 1-1/8 ounces! That means you get perfect rear toe angles, added A-arm strength, bearings that are more durable & longer lasting, an unbeatable breakage warranty and a reduction in weight! What more can anyone ask for? What’s Included: Our Revo True-Track Rear End Kit consists of two upper rear A-arms, two lower rear A-arms, two beefy rear axle carriers, two outer 6x15mm sealed bearings, two inner 12x21mm sealed bearings, two aluminum pivot ball setscrews, two delrin pivot ball bushing cups, two M3x16mm shock mount screws, two 4mm diameter tool steel hinge pins & enough e-clips to get the job done (4 minimum). RPM Recommendations: The RPM True-Track System is designed to match RPM A-arms (Part #80212 & #80215 – Right Side & #70372 & #70375 – Left Side) & Axle Carriers (#80582 & #80585 – 1 package needed) currently available for the Revo. With the True-Track system mounted at the rear and a set of RPM replacement A-arms & Axle Carriers up front, you are assured the best & most indestructible A-arm / Axle Carrier combination possible! To prolong the life of your bearings, RPM recommends the use of our #81170 Bearing Blaster. For accurate camber adjustments, please consider the use of our #70950 Monster Camber Gauge. Tech Notes: These rear end kits work on all earlier versions of the Traxxas Revo (does not fit the Revo 2.0). One kit will complete the entire rear end. These kits will not work in conjunction with Traxxas (#5356) 120-LT Long Travel Rockers.

549,-

Hovedbilde eRC spares 4499355 130mAh LiPo Battery (1) :Micro ...

eRC spares 4499355 130mAh LiPo Battery (1) :Micro ...

eRC spares 4499355 130mAh LiPo Battery (1) :Micro Collection Voltage - 3.7v Capacity - 130mAh

89,-

Hovedbilde

"BULK" Traxxas 2925X 1200mAh Power Cell NiMH Battery

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** Traxxas Series 1 battery packs with iD auto battery identification are standard equipment in Traxxas 1/16-scale models. Like all Traxxas Power Cell packs, Series 1 batteries feature heavy-duty construction, flexible silicone-jacketed wires and Traxxas' high current connector for positive plug-in with zero-loss efficiency. 1200mAh capacity NiMH 6-cell 7.2-volt Series 1 Power Cell battery with iD auto battery identification, replacement battery for 1/16 Traxxas vehicles Genuine iD-equipped Power Cell NiMH battery packs make sure you experience all the performance that's been engineered into your Traxxas model Accessory Traxxas iD Auto Battery Identification chargers (sold separately) detect Traxxas iD Power Cell batteries and automatically set and optimize charge settings for unmatched charging safety and simplicity Type Battery Material NiMH Colour Black Width 7.5 cm Height 16 cm Depth 2 cm Weight 152 g

269,-

319,-

-16%

Hovedbilde Traxxas 7151 Driveshaft assembly (1) left or right ...

Traxxas 7151 Driveshaft assembly (1) left or right ...

This is the Driveshaft Assembly for use on the Traxxas 1/16 E-Revo VXL. FEATURES: Nylon construction Black in color Fits left or right INCLUDES: One Fully Assembled Driveshaft Assembly REQUIRES: Installation on the vehicle

99,-

Hovedbilde Traxxas 7131 Suspension Arm Set Front VXL

Traxxas 7131 Suspension Arm Set Front VXL

This is the Front Suspension Arm Set for use on the Traxxas 1/16 E-Revo VXL 4WD RTR. FEATURES: Nylon construction Black in color INCLUDES: One Upper Right Suspension Arm One Lower Right Suspension Arm One Upper Left Suspension Arm One Upper Right Suspension Arm REQUIRES: Installation on the vehicle

109,-

119,-

-8%

Hovedbilde Poly-Zap CA 1/2OZ PT-22

Poly-Zap CA 1/2OZ PT-22

MEDIUM VISCOSITY MULTI PURPOSE FORMULA STRONG AND FLEXIBLE DRIES CLEAR IDEAL FOR LEXAN PT-22 1/2 oz. Poly-Zap POLY ZAP Is a specialty CA adhesive developed for use on today’s newer plastics. Lexan is one of the more difficult plastics to bond, and POLY ZAP was developed to solve that problem. It works on many types of films and painted surfaces. Its perfect for today’s ARF type models. ABS cowls, canopies, Lexan car bodies, fiberglass repair, model boat parts, and automotive trim are just a few of the many applications for POLY ZAP. To prevent fogging of clear parts do not use a Kicker. Works best on: ABS Delron Fiberglass Lexan Most Acrylics Polycarbonate Nylon Rubber Styrene

99,-