Hopp til innhold
Hjem / Radio/Servo/Motor / Motor og regulator / Tilbehør El-motorer / Hobbywing 30850102 Sensor Harness Cable 200mm

Hobbywing 30850102 Sensor Harness Cable 200mm

Art.nr: HW30850102

45,-

Hobbywing
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Hobbywing Sensor Harness Cable 200mm

Produsent

Hobbywing

Kunder kjøpte også

Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ... Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing RC PTFE Bearing (5x10x4mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6013BS/10) RC Telfon Bearing (5x10x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:   High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)  

79,-

89,-

KJØP
-11%
Hovedbilde Tamiya 54317 Sensor Cable 120mm
Tamiya 54317 Sensor Cable 120mm
Tamiya Sensor Cable 120mm 54317 The Tamiya Brushless ESC 01 (Sensored Type) includes a sensor cable to connect to the TBLM-01S series of Tamiya Brushless Motors (Sensored). This cable is now available as a separate item. In addition to the 12cm long cable, a 16cm long version is also available to allow you to choose the one which best matches the R/C unit position on your car.

65,-

KJØP
Hovedbilde Yeah Racing Aluminum 7075 Hard Coated Motor ...
Yeah Racing Aluminum 7075 Hard Coated Motor ...
Yeah Racing Aluminum 7075 Hard Coated Motor Gear/Pinions 06P 20T for Tamiya car kits Description: Replace parts to the original motor gear/pinions for Tamiya car, which is made of durable 7075 aluminum Specification: Material Aluminum Pitch Mod 0.6 Product Type Pinion Gear Teeth 20T Feature: Material: Aluminum Color: Titanium Include: Aluminum 7075 Hard Coated Motor Gear/Pinions 06P 20T (1 pc) Set screw (1 pc) How to calculate Final Gear Ratio? For example, if your car has the following setting: Motor Gear: 25 Spur Gear: 84 Pulley: 19 Gear Differential: 38 Firstly, we need to calculate the 'Motor Gear to Spur Gear Ratio', divide 84 by 25 equal to 3.36. Then we need to calculate the 'Pulley to Gear Differential Ratio', divide 38 by 19 equal to 2. Finally, the 'Final Gear Ratio' is 3.36 x 2 = 6.72. Motor Turn used based on Final Gear Ratio: 3.5T: 9.5-10 4.0T: 8.9-9.5 8.5T: 6.4-7.0

59,-

KJØP
Hovedbilde Tamiya 54277 Chassis Rein Gear Set
Tamiya 54277 Chassis Rein Gear Set
This is the optional M-Chassis Reinforced Gear Set from Tamiya.   These fit M03, M04, M05 and M06. They are also quieter than white ones. A must have for every M-chassi racer!     FEATURES Plastic construction  Black in color   INCLUDES Three gears  One outdrive cup REQIRES: Installation in transmission   COMMENTS NOT useable with M-01 and 02 chassis

79,-

KJØP
Hovedbilde Hobbywing HW30125002 - QuicRun 10BL120 SENSORED G2 ESC Hovedbilde Hobbywing HW30125002 - QuicRun 10BL120 SENSORED G2 ESC
Hobbywing HW30125002 - QuicRun 10BL120 SENSORED G2 ESC
Hobbywing HW30125002 - QuicRun 10BL120 SENSORED G2 ESC Best value for money, Easy to use The new 10BL120 G2, takes the outstanding quality and durability of proven HOBBYWING platforms and makes it even easier to use and setup. The perfect choice for 10th scale setups. Upgraded BEC The BEC's continuous output current has been upgraded from 3A to 4A. The maximum current is at 7A, and the output voltage is now 6V/7.4V adjustable. Hobbyist will be able to use high-voltage and powerful servos available on the market with greater control. Boost/Turbo timing technology The 10BL120 G2 features adjustable electronic timing. Turbo and Boost can be used to fine tune power delivery and get the most out of your setup. Up to 32 degrees of electronic timing is available. Note: Boost and Turbo timing cannot be used with a 3S battery to prevent damage. Multiple programming/tuning methods are supported Works with the Multifunction LCD programming Box Pro, The Multifunction LCD Programming Box (Non pro), the LED Programming Box, and has on board button/led tuning. Specs: Type: 1/10 Brushless & Sensored ESC Waterproof: No Cont./Peak Current: 120A/760A Input Voltage: 2-3S LiPo BEC Output: Switch Mode 6V/7.4V @ 4A Input Wires: 12AWG-200mm Output Wires: 12AWG-200mm Input Connectors: No Output Connectors: No Fan Size: 25x25x10mm Fan Output Wires: 5-8.4V Fan Input Connectors: Powered by BEC Firmware Upgrade: Not Supported Size: 43x36.8x32.3mm Weight: 101.5g Motors: Sensorless / Sensored Brushless Motor Vehicles: 1/10 Touring, Buggies & Drift Cars KV Rating/T Count: 2S Lipo ≥4.5T, 3S Lipo ≥10.5T - 3650 Size Motors ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD Pro Program Box: Supported OTA Programmer: Not Supported Program Port: Separate Program Port

699,-

849,-

KJØP
-18%
Hovedbilde Dynomax 9840 Connector Adapter T-Plug (male) - XT60 ...
Dynomax 9840 Connector Adapter T-Plug (male) - XT60 ...
DynoMAX Connector Adapter T-Plug (male) - XT60 (female) This is an practical connector adapter for batteries with an T-Plug connector where you want to change it to an XT60 connector without soldering etc.   It also works if you have an charge lead with an XT60 connector but you have an vehicle with a T-Plug connector system.

39,-

KJØP
Hovedbilde Absima 2510042 Wheel Set Drift LP Comb / Profile C ...
Absima 2510042 Wheel Set Drift LP Comb / Profile C ...
Manufacturer: Absima Position: Front & Rear Fitting: 12mm Hex Wheel Diameter: 1.9" Class: Drift Pack Contents: 4 Scale: 1:10

289,-

KJØP
Hovedbilde Yeah Racing Pinion Gear Super Hard Combo set (64P ... Hovedbilde Yeah Racing Pinion Gear Super Hard Combo set (64P ...
Yeah Racing Pinion Gear Super Hard Combo set (64P ...
Yeah Racing Pinion Gear Super Hard Combo set (64P 41T-46T 6pcs ) Description: The motor gear series including 2 major types of Pitch Pinion - the 48 Pitch Pinion and the 64 Pitch Pinion. The 48 Pitch Pinion available from 15 teeth to 38 teeth. The 64 Pitch Pinion available from 17 teeth to 52 teeth. The Yeah Racing Aluminum Motor Gear are made by 7075 high quality aluminum with titanium coated surface. Feature: For: 1:10 EP, fit on 540 Motor Material: 7075 Aluminum Color: Titanium Specification: Pitch: 64 Teeth: 41~46 Include: 64 Pitch Pinion 41 Teeth (1 Pc) 64 Pitch Pinion 42 Teeth (1 Pc) 64 Pitch Pinion 43 Teeth (1 Pc) 64 Pitch Pinion 44 Teeth (1 Pc) 64 Pitch Pinion 45 Teeth (1 Pc) 64 Pitch Pinion 46 Teeth (1 Pc) Set Screw (6 pcs)

279,-

299,-

KJØP
-7%
Hovedbilde Yeah Racing Tornado Plus Aluminium Case High Speed ... Hovedbilde Yeah Racing Tornado Plus Aluminium Case High Speed ...
Yeah Racing Tornado Plus Aluminium Case High Speed ...
Yeah Racing Tornado Plus Aluminium Case High Speed Cooling Fan 30 X 30mm Description: Yeah Racing's upgrade to their Tornado Cooling fan, the Tornado plus! Features a full aluminum case which will help dissipate the heat generated by the fan motor during hot conditions! The aluminum case increases the fan's durability to crashes as well! Features a cut in the casing for easy re-wiring! The maximum power input voltage is 8.4v (2 cells Li-Po) *Photos for reference only. Feature: For: ESC / Heatsink / Motor Material: Aluminum case, plastic fan blades Color: Black Specification: Dimensions: 30 x 30 x 10mm Bearing: Dual Ball Bearing Operating: Voltage 5V-8.4V Power: 1.40W Fan Speed: 14000 R.P.M (¡Ó20%) at 25¢J, after 3 min. rotating. Max Air Flow: 5.5CFM. Current: 0.28A Connector: JST Include: Tornado Plus Aluminum Cooling Fan (1 Pc) Round Head Fitting Screw (4 Pc) Instruction Manual (1 Pc)

199,-

229,-

KJØP
-13%
Hovedbilde Tamiya 51425 M-05RA F PARTS UPRIGHT
Tamiya 51425 M-05RA F PARTS UPRIGHT
This is the F Parts for M-05Ra chassis. F Parts x 1pc.

99,-

KJØP
Hovedbilde TAMIYA 51659 C-SHAPED 10-SPOKE WHEEL BLACK 4PCS
TAMIYA 51659 C-SHAPED 10-SPOKE WHEEL BLACK 4PCS
RC C-SHAPED 10-SPOKE WHEELS These wheels are a color variation of Item 51405 used on the Suzuki Swift Sport (Item 58679). These wheels can to be used for any Tamiya M-Chassis platform to compliment any car combination you like.  C-Shaped 10-Spoke Wheels (Black) x4    Compatible chassis: M-08 Concept M-07 Concept M-06 M-06 PRO M-05 Ver.II PRO M-05, M-05 PRO T3-01 SW-01 MF-01X Compatible tires: Items 50568, 50683, 50684, 53215, 53222, 53254, 53340 and 54216. MF-01X chassis ... Vehicles that use botouring car size tires with 60D tires and wheels cannot be used.

105,-

KJØP
Hovedbilde Tamiya 54606 M-05 Ver.II One-Piece Lower Suspension ...
Tamiya 54606 M-05 Ver.II One-Piece Lower Suspension ...
54606 Tamiya M-05 Ver.II One-Piece Lower Suspension Arm Set Info fra Tamiya: These are the revolutionary suspension arms used in Item 58593 M-05 Ver.II PRO Chassis Kit. They can be used to replace worn or broken parts in your original M0-5 Ver.II Pro or they can be used to update you version I kit to Version 2 specification. Specs and Features: One-piece parts offer greater rigidity and better handling when compared to the standard 2-piece M-Chassis parts. When used with Item 54605 (chassis parts), it allows simple adjustment of rebound stroke via the droop screw on the suspension arm itself. Compatible with M-05 Ver.II PRO, M-05* and M-06* Chassis. Note: M-05 Version 1 and M-06 chassis platforms require parts modification (explained on the 54606 instruction sheet)

99,-

KJØP
Hovedbilde Tamiya 51596 RC M-07 Concept B Parts - (Bumpers)
Tamiya 51596 RC M-07 Concept B Parts - (Bumpers)
  This is the spare B-Parts tree for the M-07 Concept chassis. They include front and rear shock towers and bumper parts. M-07 Concept B Parts x1 Contains spares to replace parts on 1 chassis. Compatible with M-07 Concept chassis cars.

115,-

KJØP
Hovedbilde Tamiya 54237 M-05 LOW FRICTION KING PIN (4 PCS)
Tamiya 54237 M-05 LOW FRICTION KING PIN (4 PCS)
  These king pins feature stronger material andtheir surface have special metal-plating toreduce friction loss       allowing a smoothermovement. Hex screw heads ensure secure attachment. Can be used with M-05, M-05Ra and TA04 chassis machines.

99,-

KJØP
Hovedbilde Tamiya Hitec Hi-Torque Servo Saver (Black)
Tamiya Hitec Hi-Torque Servo Saver (Black)
Hi-Torque Servo Saver (Black)

149,-

KJØP
Hovedbilde Tamiya RC 54605 M-05 Ver.II A Parts
Tamiya RC 54605 M-05 Ver.II A Parts
These are the A Parts for the Tamiya #58593 M-05 Ver.II PRO Chassis Kit.   FEATURES Replaces worn or broken chassis parts in the M-05 Ver.II PRO Chassis,  and may also be used to update the M-05 version I kit to version  II specifications  Moves motor position 3mm closer to center for improved balance  Compatible with square-shaped battery packs and low-profile servos  Compatible with the Tamiya #54606 one-piece lower suspension arm set   INCLUDES A Parts for the Tamiya #58593 M-05 Ver.II PRO Chassis Kit with  instructions       (D15)

149,-

KJØP
Hovedbilde Tamiya 54000 M-Chassis Aluminum Damper Set (4)
Tamiya 54000 M-Chassis Aluminum Damper Set (4)
Usable with: M-03 & M-04 & M-05 Size of damper cylinders and piston rods are optimized for use with M-Chassis. Damper cylinders have black coating on inner surface with realizes ultra-smooth movement.

729,-

799,-

KJØP
-9%
Hovedbilde Tamiya 54604 BODY MOUNT EXTENSION SET
Tamiya 54604 BODY MOUNT EXTENSION SET
This newly-designed body mount extension piece and snap pin set allows you to extend body mounts on your RC model car. They are intended to be used on those body posts which have been shortened for use with other bodies. They are compatible with a wide range of major Tamiya touring car and M-Chassis models. Contains 5.5mm Body Mount Extension x4, 6mm and 7mm Snap Pins x4 Usable with 5.5-6mm diameter body mounts. Compatible with TT-01, TT-02, TA05, TA06, TB-03, TB-04, XV-01, FF-03, M-05 and M-06 chassis body mounts.

79,-

KJØP
Hovedbilde Tamiya 54996 M-CHASSIS LIGHT WEIGHT 1-PIECE ALU. AXLE ...
Tamiya 54996 M-CHASSIS LIGHT WEIGHT 1-PIECE ALU. AXLE ...
Remove some weight and add some durability to your M-chassis car with these components, which combine wheel axle and hub in one aluminum component! • One-Piece Aluminum Axle/Hub x2 • Hard anodized coating for superior durability. • These components are half the combined weight of the kit standard metal axle and a 5mm plastic wheel hub. • Use the included spacers to adjust tread to the same values as those achieved when using 4mm, 5mm and 6mm wheel hubs. • Compatible with M-05, M-06, M-07 and M-08 Concept chassis cars.

239,-

249,-

KJØP
-4%
Hovedbilde Yeah Racing TAMC-074BU Aluminum Rear Damper Stay for ... Hovedbilde Yeah Racing TAMC-074BU Aluminum Rear Damper Stay for ...
Yeah Racing TAMC-074BU Aluminum Rear Damper Stay for ...
Yeah Racing Aluminum Rear Damper Stay for Tamiya M08 Blue Description: Aluminum damper stay for Tamiya's M08, stronger than the original plastic part means your car will handle crashes better!     Features: For: Tamiya M08 Material: Aluminum Color: Blue   Includes: Aluminum Damper Stay (1 pc) Screws (2 pcs) Ballstuds (2 pcs)

119,-

KJØP
Hovedbilde Yeah Racing Aluminum Front Damper Stay For Tamiya M08 ... Hovedbilde Yeah Racing Aluminum Front Damper Stay For Tamiya M08 ...
Yeah Racing Aluminum Front Damper Stay For Tamiya M08 ...
Yeah Racing Aluminum Front Damper Stay for Tamiya M08 Blue Description: Aluminum damper stay for Tamiya's M08, stronger than the original plastic part means your car will handle crashes better! Feature: For: Tamiya M08 Material: Aluminum Color: Blue Include: Aluminum Damper Stay (1 pc) Screws (2 pcs) Ballstuds (2 pcs)

129,-

KJØP
Hovedbilde Tamiya 53444 Silicone Damper Oil Medium Set
Tamiya 53444 Silicone Damper Oil Medium Set
Developed for oil-filled damper units on R/C cars. Maintains constant viscosity through a wide temperature range.  Medium Set: Green #500 Blue #600 Purple #700 3 digit number show the viscosity of the oil (water viscosity is #1). The higher the humber, the higher the viscosity.

149,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png