Hopp til innhold
-8%

Gens Ace 3s 5000mAh - 60C - Bashing G-Tech XT90

Art.nr: B-60C-5000-3S1P-Bashing-XT90

599,-

649,-

- 8%
Gens Ace

Gens Ace

** Ikke på lager

Midlertidig utsolgt – kan bestilles

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

3s 5000mAh - 60C - Gens Ace XT90 Bashing Series

Spesifikasjoner:

Kapasitet: 5000mAh
Spenning: 3S 11.1V
Vekt: 342g
Størrelse: 135x43x25mm
Strømplugg: XT90

 

 

Product details in english

Gens ace lipo 5000mah 3S1P 60C battery Suited to the following models:1/8, 1/10 RC car model, such as 1/8 SLEDGE. Fast charging by 5C is available.

 

Specs:

- Product Type: lipo battery pack-Bashing Series
- Capacity: 5000mAh
- Voltage: 11.1V
- C rate: 60C 
- Weight: 342g
- Dimensions: 135*43*25mm
- Balance Plug: JST-XHR-4P
- Discharge Plug: XT90
- Charge Rate: 1-3C Recommended

 

Usage:

Gens ace lipo 5000mah 3S1P 60C battery packs suited for 1:8 TYPHON 6S/3S 1:10 SENTON 3S/GRANITE 4x4 MEGA/BIGROCK 4x4 3S BLX/OUTCAST/Kraton 1/8 SLEDGE.

Produsent

Relaterte produkter

 

Art.nr: GE3-8500-3X9
Copied
Gens Ace Battery LiPo 3S 11.1V-8500-45C (XT90 Dual) 155x45x31mm 518g

1.295,-

På lager 1
KJØP

Kunder kjøpte også

    Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Traxxas ID plugg for 3s LiPo til 4mm bananplugger. Benyttes for lading av batterier med Traxxas ID-plugg, og kobles rett i ladere med 4mm tilkobling. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 4mm Banan Tilkobling 2 Traxxas ID 3s

169,-

På lager 6
KJØP
Traxxas 5000mAh 11.1v 3-Cell 25C Short LiPo Battery TRAXXAS CERTIFIED LIPO POWER! Traxxas Certified iD-Equipped LiPo batteries are engineered to provide the punch and on-demand power for reaching the top speeds that Traxxas models are built to achieve. Traxxas Power Cell iD-Equipped LiPo batteries are engineered specifically to fit Traxxas models and maximize their full performance potential. Only Traxxas gives you more of what you want most: simple installation, a great price, and the most speed and run time available. Specs: Type: LiPo Total Capacity: 5000 mAh Voltage: 11.1 V (3S) C Rating: 25 Length: 135 mm Height: 28.5 mm Width: 44 mm Weight: 354 g

995,-

1.095,-

På lager 2
KJØP
-9%
Traxxas 67376-4-ORNG - Rustler 4x4 VXL Brushless Extreme Heavy Duty 1/10 RTR - ORANGE The RC Stadium Truck Redefined Rustler® 4X4 VXL is a hard-charging wheelie machine that captures the speed and style of a stadium truck and injects it with a massive dose of strength and power. Beneath Rustler’s clipless body, the extreme Velineon® brushless power system feeds power through the factory-installed Extreme Heavy Duty Upgrade Kit to become the new standard for strength and durability. Extreme HD Upgrade Kit Rustler 4X4 VXL’s factory-installed Extreme Heavy Duty Upgrade Kit replaces key drivetrain and suspension components with beefed-up parts made for ultimate strength and durability. From the HD suspension arms to the steel wheel hubs, this is the strongest driveline ever offered in a Rustler. Self-Righting Rustler 4X4 VXL uses Traxxas’ patented self-righting feature to keep the fun going, even when you get carried away with the wheelies or land that big trick upside down. Simply press a button on the TQi™ transmitter and, in most circumstances*, Rustler 4X4 VXL will be back on its wheels in just seconds and ready for more action! *3s power is recommended for optimal performance Clipless Body Mounting Rustler 4X4 VXL uses a clipless body latching system for secure mounting and fast, one-handed removal and installation. The sleek, aerodynamic body features a rugged internal structure and external rollover protection for long life and Traxxas-Tough™ durability. Specs: Length: 477mm Width: 329mm Ground Clearance: 27mm Weight: 2.32kg Height: 161mm Wheelbase: 295mm Front Shock Length: Long Rear Shock Length: XX-long Tires (pre-glued): 114x58mm Talon™ EXT Wheels: 2.8" (71mm) black chrome Speed Control: VXL-3s™ Motor (electric): Velineon® 3500 brushless Transmission: Single speed Overall Drive Ratio: 13.97:1 Differentials: Sealed, 2-gear Chassis Structure / Material: Composite tub Brake Type: Electronic Drive System: Shaft driven 4WD Steering: Bellcrank with integrated servo saver Radio System: TQi™ 2.4 GHz 2-ch transmitter with 6533 TSM receiver Servo: Waterproof 2075 Top Speed (optional gearing): 104+ kph with 3-cell LiPo and 20/54 gearing (Skill Level 5) Skill Level: 1 (2s LiPo and stock gearing) Battery Compartment: 162x50x25mm What’s In The Box: Rustler 4X4 VXL with Velineon VXL-3s and 3500 kV motor Quick Start Guide TQi 2.4 GHz radio system High quality maintenance tools Includes speed pinion What You’ll Need: Batteries: Rustler 4X4 VXL requires a single NiMH or LiPo battery. See full list of batteries Charger: Traxxas EZ-Peak® Live charger (2971) is recommended for easy and fast charging performance AA Alkaline Batteries: Four AA alkaline batteries for the transmitter

5.295,-

5.695,-

På lager 6
KJØP
-7%
  Low Resistance Gold Plated Brass Heat Resistant Housing (-20–200°C) Max load: 90-120A Size (together) : L: 29 x W21 x H10 mm Weight: 13 g (pair) Diameter: 4.5 mm Wire Max dia: 4.0 mm (10AWG) Package includes: 1 par of XT-90 connectors

59,-

På lager 2
KJØP
The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.  

299,-

329,-

På lager 4
KJØP
-9%
Tie-Bars Front Alu Green Sledge Tie bars, front, 6061-T6 aluminum (green-anodized) Give your Sledge® a bold new look with these brightly-anodized 6061-T6 aluminum front tie bars.

179,-

189,-

På lager 2
KJØP
-5%
Suspension pin set, front & rear (hardened steel), 4x67mm (4), 3.5x48.2mm (2), 3.5x56.7mm (2)/ M3x0.5mm NL, flanged (2)

199,-

På lager 2
KJØP
Traxxas 9531G Suspension Arm Front Left Green Sledge Suspension arm, front (left), green

139,-

På lager 2
KJØP
Traxxas 9530R Suspension Arm Front Right Red Sledge Suspension arm, front (right), red

139,-

På lager 2
KJØP
 XT90 MALE WITH CAP END (ESC END) (5PCS)

159,-

På lager 1
KJØP
BATTERY ADAPTER, XT90 MALE TO XT60 FEMALE

109,-

På lager 1
KJØP
This is the Heavy Duty Driveshaft Assembly for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: Front driveshaft assembly           Screw pin REQUIRES: Installation on vehicle

129,-

Ikke på lager
Ikke på lager
Traxxas TQi Telemetry Expander 2.0 and GPS Module 2.0 Conversion Kit! TRAXXAS TELEMETRY EXPANDER KIT (#6553X) FEATURES: Includes receiver data cable (optional data cables available) Installs quickly and easily; no parts to replace or swap Waterproof case keeps the expander safe from the elements Six available ports for connecting additional temperature and voltage sensors Uses GPS and GLONASS global positioning for accurate, real-time speed Speed readout not affected by gear ratio or tire-size Requires the TQi radio system with Wireless Module (#6511), TSM receiver (#6533), Apple device running iOS 7.0 or higher, or Android-equipped device with Android 4.4 and higher, and the Traxxas Link App (latest version available free on Google Play and the App Store) Expanded Innovation Traxxas telemetry changes the game by allowing you to monitor and record real-time data from your vehicle while you drive. The waterproof Telemetry Expander 2.0 includes the GPS Module 2.0 for the most accurate speed possible and accepts up to six additional auto-detectable sensors. The Traxxas Link app automatically recognizes sensors, so setup takes only a few moments! Advanced communication bus technology allows you to connect the telemetry expander to your TSM receiver or to your High-Voltage Power Amplifier, or directly to the VXL-6s and VXL-8s electronic speed controls with optional data cables. Install the Telemetry Expander, choose your sensors, and prepare for an all-new RC driving experience! Important Note The new GPS Module 2.0 (#6551X) and Telemetry Expander 2.0 (#6550X) replace the original Telemetry Expander (#6550) and GPS Module (#6551). The originals are not compatible with the new 2.0 versions.

1.549,-

1.695,-

** Ikke på lager
KJØP
-9%
Traxxas TQi & Aton Transmitter Phone Mount Mount a Mobile Device to your TQi or Aton Transmitter The new Traxxas RC Transmitter Phone Mount provides a convenient mounting base for your mobile device on TQi and Aton transmitters. This mount makes monitoring real-time telemetry and adjusting settings simple, keeping your device secured to the radio for easy access. Spring loaded clamps hold a variety of mobile devices to the mount, and the base swivels and tilts to customize the position. Get the most from Traxxas Link telemetry accessories and apps with the new Transmitter phone mount.   Neither a smart-phone or a transmitter is included.  

199,-

219,-

På lager 3
KJØP
-9%
This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

** Ikke på lager
KJØP
-9%
VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

På lager 3
KJØP
-11%
Charge Two Batteries at Once 8-amp Output in Our Fastest, Most Powerful Charger! Charging Solved! Simple. Fast. Just plug in a pair of Traxxas iD batteries and press Start. Traxxas’ exclusive iD technology eliminates complicated charger programming by automatically configuring and optimizing the charge settings for Traxxas iD batteries. The EZ-Peak Dual charges two batteries simultaneously at up to 50 watts (4-amps) each, or switch to High-Output mode to charge a single battery at the maximum 100 watt (8-amps) output. Charging faster means more fun time behind the wheel. You can even charge a NiMH and a LiPo at the same time! The progress bar and audible alerts keep you informed while the advanced high resolution peak detection delivers a perfect charge every time. The EZ-Peak Dual’s Storage Mode protects your LiPo battery investment by safely preparing the batteries for extended storage. Our Most Powerful Charger Faster charging means you get to spend more time behind the wheel. The EZ-Peak Dual puts out a full 100 watts of power that equates to 8-amps of charging horsepower. It’s a twin turbo-equipped charger. Traxxas iD LiPos (4000mAh or higher) charge nearly 2x faster in High Output Mode. The EZ-Peak Dual isn’t just for iD LiPos; the Multi-Chemistry nature of the charger means LiPos and NiMHs can be charged at the same time. Advanced Mode opens the door for backwards compatibility. This allows EZ-Peak Dual to charge any Traxxas Power Cell battery equipped with a first-generation Traxxas High-Current Connectors and Traxxas iD batteries independently or simultaneously. There are two balance ports built into the charger for Traxxas LiPo batteries equipped with external balance leads. Take full advantage of the 8-amp output and experience the pinnacle of charger flexibility and power.   iD Simplicity With iD Auto-Battery Identification there’s no need to worry about the battery chemistry or capacity. EZ-Peak Dual identifies the type of battery and its capacity. EZ-Peak Dual also cuts down on wasted time by eliminating the hassle of programming and using complicated setups. Just plug an iD battery in and press Start. That’s it! Keeping with the simplicity and ease of use, the iD system eliminates fragile balance wires and clunky balance leads. The iD system streamlines the entire charging experience. QUICK FEATURES ON EZ-PEAK DUAL (#2972) CHARGER ­100-Watt output Recognizes Traxxas iD batteries to automatically program and optimize charger settings Charge a NiMH and LiPo at the same time Charge progress indicator Optimized for faster LiPo balance charging One button LiPo storage charge protects your battery investment Advanced high-resolution peak detection delivers a perfect charge Easy to use interface Audible alerts Built-in cooling fan Advanced Mode for full manual control of charger settings Legacy support for all Traxxas High-Current Connectors Built-in balance ports for conventional LiPo batteries Charges 5-8-cell NiMH batteries Charges 2S and 3S LiPo batteries EZ-PEAK DUAL (#2972G) SPECIFICATIONS AC Input: 100–240 Volts Charge Current Range: 1.0-4.0A (Dual Mode) or 5.0-8.0A (High Output Mode) (100W Max.) Discharge Current Range: 500 mAh Current Drain For Balance Ports: 500mAh NiMH Battery Cell Count: 5–8 Cells LiPo Cell Count: 2–3 Cells Net Weight: 575 g Dimensions: 176 x 138 x 57 mm  

1.395,-

1.495,-

På lager 8
KJØP
-7%
 This is a Package of 2x10mm shafts that are used in a variety of applications. FEATURES: Steel construction           Polished INCLUDES: Ten 2x10mm shafts REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Length: 10mm           Diameter: 2mm COMMENTS: Many different brands use 2x10mm shafts for different components.

45,-

På lager 6
KJØP
Charge lead XT30 with 4mm banana connector

79,-

På lager 1
KJØP
LiPo, LiFe & LiIon Cell-tester with Low-Voltage Alarm 1-8S This is a small and practical Lithium battery cell-tester with built in low-voltage alarm. With this unit you can easily check your battery packs through the balance connector or have it installed in the model hooked up to the battery balance connector and get an buzzer tone when the set value is reached. Specifications: For 1S with JST-RCY (BEC) connector and 2-8S LiPo, LiFe & LiIon batteries with a JST-XH balance connector LCD: 0.5-4.5V/cell Cells: 1-8S Adjustable alarm value: OFF/2.7-3.8V per cell (pre-set at 3.3V) Volt precision: 0.01V Size: 40,5 x 29 x 13mm Weight: 14g

109,-

** Ikke på lager
KJØP
CHARGE LEAD, 4MM BULLET TO XT90 MALE, 12AWG, 150MM (ESC END) MERKE Radient KONTAKT 4mm BULLET, XT90 PRODUKT Ladekabel

109,-

På lager 2
KJØP
Connector XT30 2mm pair 1 male & 1 female

35,-

På lager 3
KJØP
  Suitable for: FMS Airplanes etc Battery: 2S 7.4V 600mAh LiPo 25C Max Discharge: 15A Continuous / 30A Burst Charge: Max 3C/1.8A (fast) Connector: JST-RCY (BEC) Balance Connector: XH Length: 46.5 mm Width: 24.5 mm Height: 17 mm Weight: 35 g

149,-

** Ikke på lager
KJØP
  Onyx Adapter Male T-Plug to Female XT90

89,-

På lager 1
KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png