This is the RPM Landing Gear in Black for the LaTrax Alias Quadcopter.
FEATURES
Constructed of engineeering grade nylons
Adds 0.8" (20mm) of extra height
Reduces chance of blade strikes when landing in grass
Also spreads center point of each leg further out by 0.45" (11.5mm)
adding stability to take-offs and landings
Replaces the LaTrax #6649 rubber feet
INCLUDES
Four Landing Gear Sections
REQUIREMENTS
0.05" hex key wrench for installation
This is the RPM Landing Gear in Blue for the LaTrax Alias Quadcopter.
FEATURES
Constructed of engineeering grade nylons
Adds 0.8" (20mm) of extra height
Reduces chance of blade strikes when landing in grass
Also spreads center point of each leg further out by 0.45" (11.5mm)
adding stability to take-offs and landings
Replaces the LaTrax #6649 rubber feet
INCLUDES
Four Landing Gear Sections
REQUIREMENTS
0.05" hex key wrench for installation
Prop Guards for the LaTrax Alias
Quick Notes:
– extreme strength and durability
– weighs in at a mere 4 grams per guard (including hardware)
– sold in pairs (two pairs required per Alias)
– 0.05″ hex key wrench is required (not included) for installation.
Description:
The LaTrax Alias is a fun and capable entry-level quadracopter. However, a simple propeller blade strike can easily take out one of its minuscule motors. RPM Prop Guards alleviate that problem. Our Prop Guards are super lightweight and install in a matter of minutes, adding a tremendous amount of protection to both the motors and propellers of the Alias.
Each Prop guard is molded in our trademark blend of engineering grade nylons for unmatched strength and durability. While we made our guards extremely tough, we also made them very light to minimize the effects of added weight on the air frame, weighing in at a mere 4 grams per guard!
RPM Prop Guards for the LaTrax Alias are sold in pairs (two pairs will be needed for one Alias) and are molded in either black or blue. RPM Prop Guards will pay for themselves the first time you have one of those “oops” moments! Don’t let a mistake ruin your day of fun. Bolt a set of RPM Prop Guards on and let your confidence soar!
Tech Notes: RPM Prop Guards are designed as “bumpers” to help deflect light to medium impacts. They are not designed to save the Alias from full speed or gravity fed crashes. Sold in pairs (two pairs are required for one Alias). Four Prop Guards (2 – front & 2 – rear) must be installed at the same time. Failure to install Prop Guards in all four corners may cause adverse flying characteristics. A 0.05″ hex key wrench is required (not included) for installation
These are the RPM Propeller Guards in Blue for the LaTrax Alias Heli.
FEATURES
Plastic construction, blue in color
Weighs only 0.14oz (4g) per guard including hardware
INCLUDES
Two Prop Guards with Mounting Hardware and Instructions
These are the stock replacement 2.5x10mm socket head screws used to
attach the cylinder head to the Traxxas Image engine.
Features: strong steel design
Specifications: 2.5x10mm sockethead screw
Includes: Six 2.5x10mm sockethead screws
This is the Red Canopy for the Latrax Alias Quadcopter in Red
FEATURES
Two-piece plastic construction
INCLUDES
Red Canopy with three Screws
SPECIFICATIONS
Length: 3.4" (87.7mm)
Width: 1.9" (47.5mm)
Height: 0.78" (20mm)
This is the Blue Canopy for the Latrax Alias Quadcopter in Blue
FEATURES
Two-piece plastic construction
INCLUDES
Blue Canopy with three Screws
SPECIFICATIONS
Length: 3.4" (87.7mm)
Width: 1.9" (47.5mm)
Height: 0.78" (20mm)
This is the Orange Canopy for the Latrax Alias Quadcopter in Orange
FEATURES
Two-piece plastic construction
INCLUDES
Orange Canopy with three Screws
SPECIFICATIONS
Length: 3.4" (87.7mm)
Width: 1.9" (47.5mm)
Height: 0.78" (20mm)
This is the Green Canopy for the Latrax Alias Quadcopter in Green
FEATURES
Two-piece plastic construction
INCLUDES
Green Canopy with three Screws
SPECIFICATIONS
Length: 3.4" (87.7mm)
Width: 1.9" (47.5mm)
Height: 0.78" (20mm)
This is the Main Frame for the Latrax Alias Quad-Rotor Helicopter.
FEATURES
Molded plastic construction, black in color
Replaces damaged main frame
INCLUDES
Main Frame for the Latrax Alias Quad-Rotor Heli
Four Screws
This is the Main Frame for the Latrax Alias Quad-Rotor Helicopter.
FEATURES
Molded plastic construction, white in color
Replaces damaged main frame
INCLUDES
Main Frame for the Latrax Alias Quad-Rotor Heli
Four Screws
This is the optional Main Frame in Black Chromefor the Latrax Alias Quad-Rotor Helicopter.
FEATURES
Molded plastic construction with black chrome finish
Holds each motor and all other components in place
INCLUDES
Main Frame for the Latrax Alias Quad-Rotor Heli
Four Screws
This is the Rotor Blade Set in Black for the Latrax Alias Quadcopter.
FEATURES
Plastic construction
Flexible to withstand crashes
INCLUDES
Two Rotor Blades
Two 1.6x5mm Button Head Cap Screws
This is the Rotor Blade Set in White for the Latrax Alias Quadcopter.
FEATURES
Plastic construction
Flexible to withstand crashes
INCLUDES
Two Rotor Blades
Two 1.6x5mm Button Head Cap Screws
This is the Rotor Blade Set in Red for the
Latrax Alias Quadcopter in Red
FEATURES
Plastic construction
Flexible to withstand crashes
INCLUDES
Two Rotor Blades
Two 1.6x5mm Button Head Cap Screws
This is the Rotor Blade Set in Blue for the
Latrax Alias Quadcopter in Blue.
FEATURES
Plastic construction
Flexible to withstand crashes
INCLUDES
Two Rotor Blades
Two 1.6x5mm Button Head Cap Screws
This is the Rotor Blade Set in Orange for the
Latrax Alias Quadcopter in Orange
FEATURES
Plastic construction
Flexible to withstand crashes
INCLUDES
Two Rotor Blades
Two 1.6x5mm Button Head Cap Screws
This is the Rotor Blade Set in Green for the
Latrax Alias Quadcopter in Green
FEATURES
Plastic construction
Flexible to withstand crashes
INCLUDES
Two Rotor Blades
Two 1.6x5mm Button Head Cap Screws
These are the optional Aluminum Main Shafts w/Screws
for the Latrax Alias Quadcopter.
FEATURES
Aluminum construction, blue in color
INCLUDES
Four Main Shafts with Screws
NB: Dette er utgaven uten hull i motordekslet.
This is the Motors for the Latrax Alias Quadcopter.
FEATURES
Red connectors on the clockwise motors
Black connectors on the counter-clockwise motors
INCLUDES
Two clockwise motors
Two counter-clockwise motors
This is the Counterclockwise Rotating Motor for the Latrax Alias Quadcopter.
FEATURES
High output replacement for damaged or non-functioning motors
Color of connector indicates rotation of motor and proper connection
to receiver
INCLUDES
Counterclockwise Rotating Motor with Pinion Gear and Black Connector
Instruction Sheet
COMMENTS
Two counterclockwise rotating motors are required per quadcopter
This is the Clockwise Rotating Motor for the Latrax Alias Quadcopter.
FEATURES
High output replacement for damaged or non-functioning motors
Color of connector indicates rotation of motor and proper connection
to receiver
INCLUDES
Clockwise Rotating Motor with Pinion Gear and Red Connector
Instruction Sheet
COMMENTS
Two clockwise rotating motors are required per quadcopter