Hopp til innhold

Bandit XL-5

Populært i denne kategorien

 
Art.nr: TRX 1985
Copied
These are Replacement Washers from Traxxas. FEATURES: Black teflon construction.           Used on the axles and in the transmission. INCLUDES: (20) Washers SPECS:    Size:      5x8mm           Thickness: 0.5mm

29,-

KJØP
Art.nr: TRX 2923X
Copied
This is the Traxxas 7-Cell 8.4V 3000mAh iD Power Cell NiMH Stick Battery Pack FEATURES New high current connector with gold-plated copper terminals  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings  MAXX cable high-efficiency 12 gauge silicone jacketed wire  Sub C size cells INCLUDES One 7-cell 8.4V 3000mAh iD Power Cell NiMH Stick Pack with High-  Current Connector REQUIREMENTS Peak-detection charger SPECIFICATIONS  Length: 155mm (6.10")  Width: 44mm (1.7")  Height: 23mm (0.91")  Weight: 380g (13.4oz)

499,-

519,-

KJØP
-4%
Art.nr: TRX 2432
Copied
These are Left and Right Caster Blocks for the Traxxas Bandit XL5  . Traxxas Bandit VXL Traxxas Drag Slash 1967 Chevrolet® C10 Truck Traxxas Drag Slash Ford® Mustang® 5.0 On the other cars it is TRX 3632 that fits. FEATURES: Black Plastic Caster Blocks INCLUDES: One Left Block           One Right Block REQUIRES: Traxxas Bandit COMMENTS: None  

49,-

59,-

KJØP
-17%
Art.nr: TRX 1834
Copied
Disse passer Traxxas 1/16 biler.   These are Replacement Traxxas Body Clips.          They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS:    Length: aprrox. 7/8"  

25,-

35,-

KJØP
-29%
Art.nr: TRX 2437
Copied
This is a pair of Front Axles for the Traxxas Bandit Buggy Kit                    and the Ready To Run version. FEATURES: Constructed of steel. INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run             Version with two 0.14"(3.5mm) x 0.26"(7mm) plastic hex nuts. SPECS:    Length:                  0.94" (24mm)           Length of threaded area: 0.14" (3.5mm)           Thread size:             0.16" (4mm) REQUIRES: Placing each axle into the Steering Blocks TRX 3636, and installing             Stub Axle Pins TRX 2754.

39,-

KJØP
Art.nr: TRX 5116
Copied
Disse lagerene er samme størrelse som Tamiya 1150 This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X11mm ball bearings, Part #5116 SPECS:    Inside diameter:      3/16"      (5mm)           Outside diameter:     7/16"     (11mm)           Width:                5/32"      (4mm)

49,-

55,-

KJØP
-11%
Art.nr: TRX 1965
Copied
This is a replacement Piston head set for most Traxxas vehicles including the Sledge, Bullet, Rad, N.Street, N.Hawk, N.Buggy, Blue Eagle,LS,LSII, and TRX-1. Includes: 2- plastic Lower spring retainers 2- plastic Upper spring clamps 2 each - plastic 1 hole pistons, 2 hole pistons, and 3 hole pistons 2- 2.5mm x 9mm machine screw used in spring clamp.    

35,-

KJØP
Art.nr: TRX 2263
Copied
Y-harness, BEC to LED light set

59,-

KJØP
Art.nr: TRX 2362
Copied
This is a shock rebuild kit for 2 Traxxas black plastic shocks.  Includes: 4 E-clips   2 C-clips   2 O-rings   8 Washers   2 Diaphrams

35,-

KJØP
Art.nr: TRX 2381X
Copied
This is the Main Diff with Steel Ring Gear from Traxxas               for the Bandit, Stampede and Rustler VXL series. Includes:  Main diff with steel ring gear            Side cover plate            Screws            Instructions Requires:  Installation on the vehicle

75,-

KJØP
Art.nr: TRX 2382
Copied
These are the replacement planetary gear and shafts. FEATURES:  All these gears and shafts are made of metal(probably with a low            amount of steel). INCLUDES:  4- planetary gears            4- planteary gear shafts            2- sun gears            1- sun gear alignment shaft

75,-

KJØP
Art.nr: TRX 2388X
Copied
This is the Complete Planetary Gear Differential With Steel Ring Gear                 for the Traxxas Bandit, Stampede and Rustler. FEATURES: Metal gear shafts           Metal and plastic main differential INCLUDES: Main differential with steel ring gear           Planetary gears and shafts           Sun gears and shafts           Silicone  grease REQUIRES: Installation on the vehicle COMMENTS: For main differential w/ steel ring - TRX 2381X                     Planet gear shafts - TRX 2382                     Silicon grease  - TRX 1647

179,-

189,-

KJØP
-5%
Art.nr: TRX 2458A
Copied
This is a pair of White Front Springs for the Traxxas Bandit FEATURES: Painted white           Steel construction INCLUDES: Two springs SPECS:    Length: 2.16" (55mm)           Inside diameter: .61" (15mm)           Outside diameter: .71" (18mm)

49,-

KJØP
Art.nr: TRX 2743
Copied
These are 3mm Grub Screws from Traxxas. FEATURES: Hardened steel construction.           Hexagon socket drive insert. INCLUDES: (12) Grub Screws SPECS:    Size:  3mm  

39,-

KJØP
Art.nr: TRX 2545
Copied
Bellcrank bushings (plastic) (5x8x2.5mm) (4)

39,-

KJØP
Art.nr: TRX 2745
Copied
These are 3mm Nylon Locking Nuts from Traxxas. FEATURES: Durable metal construction           Nylon inserts INCLUDES: (12) Lock Nuts SPECS:    Size:  3mm

29,-

39,-

Ikke på lager
-26%
Art.nr: TRX 2548
Copied
Screws, 4x12mm countersunk machine (100-degree) (6)

25,-

KJØP
Art.nr: TRX 2746
Copied
These are 3x6mm Washers from Traxxas. FEATURES: Metal construction INCLUDES: (12) Washers SPECS:    Size:  3x6mm

25,-

30,-

Ikke på lager
-17%
Art.nr: TRX 2558
Copied
  Screws 3x6mm roundhead machine

25,-

KJØP
Art.nr: TRX 2750R
Copied
Suspension arms, long (rear) for Traxxas Bandit.

95,-

KJØP
Art.nr: TRX 2566
Copied
Screws, 3x20mm roundhead machine (6)

25,-

KJØP
Art.nr: TRX 2754
Copied
These pins slide through the axle and hold the wheel to the axle. INCLUDES:  4- stub axle pins

15,-

KJØP
Art.nr: TRX 2567
Copied
Screws, 3x23mm roundhead machine (6)

25,-

KJØP
Art.nr: TRX 2572
Copied
Screws, 3x30mm roundhead machine (6)

25,-

KJØP
Art.nr: TRX 2587
Copied
       This is a package of six 3x10mm Traxxas Cap Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x10mm cap head screw is required INCLUDES: Six 3x15mm Traxxas Cap Head Screws REQUIRES: 2.5mm hex head wrench SPECS:    Length:  15mm           Diameter: 3mm

35,-

KJØP
Viser 51 til 75 (av 147 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png