Tamiya 47498 TA08R Chassis Kit 1:10th Scale

Art.nr: 47498

Copied

Belt-Driven 4WD Pro Chassis Kit Enter a new top model in the TA08 chassis range: the TA08R takes the 2-belt driven 4WD TA08 PRO chassis (Item 58693) and loads it with a wealth of Hop-Up Options and even more some dedicated parts for great performance and drivability.   About the Model This is a 1/10 scale R/C touring car chassis kit. The 2.0mm carbon fiber upper deck connects front and rear bulkheads for pitch rigidity and utilizes a 630 ball bearing at the rear for roll rigidity. Front and rear aluminum upper arm mounts allow enhanced rigidity and intuitive drive. The aluminum motor mount has two screw-attached, upper deck attachment points. Rear body mount uses carbon fiber plates and aluminum posts, and limits body wobble and ensures stable rear traction. Body mount extensions (from Item 54604) allow attachment of bodies of different heights. Additional ribs on the lower deck limit its deformation for superior suspension performance and help limit damage after unexpected crashes. Gear units are front direct pulley (aluminum direct coupling) and rear gear differential (aluminum differential joint). Item 42351 TRF420 Center Pulley and 71T spur gear are used at the center for stability even under high load. The drive shafts are double cardan shafts at the front and lightweight universal shafts at the rear. Front aluminum pipes and cross joints are lightweight aluminum. Aluminum wheel hubs limit wheel deformation and ensure stable tire grip. Comes with 43mm swing shafts, Super Short Big Bore size dampers and front and rear carbon fiber damper stays, plus adjustable suspension mounts. The model comes in a stylish and convenient carry case.   Specifications: Length: 373mm  Width: 187mm  Wheelbase: 257mm  2-belt 4WD  Front & rear oil-filled gear differentials  3-piece steering tie-rod  4-wheel independent double wishbone suspension  Included Hop-Up Options 51565: TRF419 Gear Differential Unit Aluminum Diff Joint (2pcs.) 22004: TA08 Aluminum Servo Mount 22005: TA08 Carbon Damper Stays (Front & Rear) 22016: TA08 Low Friction King Pin Balls (4pcs.) 42319: Lightweight Cross Joints for Double Cardan Joint Shafts (4pcs.) 42320: Lightweight Joint Casings for Double Cardan Joint Shafts (2pcs.) 42346: TRF420 Wheel Axles (2pcs.) 42351: TRF420 Center Pulley 42357: Cross Joints for Low Friction Assembly Universal Shafts 42359: VG O-Rings for Oil Dampers (30°) 42361: 43mm Drive Shafts for Low Friction Double Cardan Joint Shafts (2pcs.) 42363: Axle Shafts for TRF420 Double Cardan Joint Shafts (2pcs.) 42374: VG O-Rings for Gear Differentials (40°) 53823: Clamp Type Aluminum Wheel Hub (5mm Thick) 53968: 5x5mm Hard Hex Head Ball Head Connector (5pcs.) 53969: 5x8mm Hard Hex Head Ball Head Connector (5pcs.) 54121: Aluminum Horn for High Torque Servo Saver 54642: 4mm Flange Lock Nut (Black, 8pcs.) 51647: TRF420 Aluminum Front Direct Cups (2pcs.) 54704: TA07 Aluminum Steering Arm Set 54881: Aluminum Adjustable Suspension Mount (A) 54883: Aluminum Adjustable Separate Suspension Mounts (XB) 54884: Aluminum Adjustable Separate Suspension Mounts (A) 54949: TA07 Adjustable Ackerman Set Needed to complete: Compatible body Wheels & Tires Radio system ESC Servo Batteries for transmitter Type 540 Motor Battery & Charger

7.295,-

7.995,-

KJØP

-9%

TAMIYA 58693 RC TA08 PRO CHASSIS KIT

Art.nr: 58693

Copied

TAMIYA RC TA08 PRO CHASSIS KIT Speedy and controllable 2 belt-driven 4WD chassis in TA series! The Tamiya TA series continues to evolve. This iteration, the TA08 PRO, further evolves on-road touring car driving with this hopped-up chassis. The slim TA08 PRO Chassis Kit eliminates the need for an upper deck, which balances weight and rigidity. Its layout features the motor in near identical position to the TRF420, with the spur gear in front of the motor. Newly designed upper & lower arms make effective use of tire grip, equipped with laid down SSBB (Super Short Big Bore) dampers. This kit was based on Tamiya's extensive know-how built up through our traditional chassis series and data from racing, and offers plenty of potential for tuning. • 1/10 scale R/C touring car assembly chassis kit. • Features Stepped-V shaped main chassis which balances weight and rigidity. • The battery pack and servo are positioned on a slight angle (about 10 degrees) to reduce surface contact while cornering and facilitate optimum weight distribution. • Spur gear is positioned in front of motor which produces stable drivability. • 2 belt-driven 4WD uses TRF420 oil-filled gear differentials and steel TA07 differential joint cups. • A-arm suspension arm gives your model a low center of gravity, enhanced with laid down dampers. • Camber and caster angles are adjustable by turnbuckle shafts and lower arm spacers respectively. • Comes with Super Short Big Bore size shock dampers. • Universal drive shafts and full bearings included. • Rotating body mounts by 180 degrees switches between standard and 2mm advanced body positions. This feature allows the user to change the balance of the car with any selected body. Requires: 2-channel radio Short steering servo ESC Motor 190mm touring car body set Tires 7.2-7.4 volt battery pack & compatible charger. SPECIFICATIONS Adjustable Gear Ratio Yes Bearings Includes full ball bearings Chassis Material FRP Fiberglass Reinforced Plastic Chassis Type TA08 Construction Type Assembly Kit Differential Type Gear-Type (Oil-Filled) Drive Type 4WD Electronic Speed Control (esc) Sold Separately Motor Sold Separately Requires A 2-channel radio, low-profile steering servo, ESC, motor, tires, 190mm body set, 7.2-7.4 volt battery & battery charger Scale 1/10 Shock Damper Aluminum oil filled-Short BB-Type Suspension 4-wheel fully independent double wishbone Terrain Use On-Road

3.895,-

4.395,-

KJØP

-11%