Slash 4x4 Ultimate Low-CG Chassi

Hovedbilde Traxxas 2271 Servo Case for 2270

Art.nr: TRX 2271

Copied

Servo Case for 2270 Servo case/ gaskets (for 2270 waterproof servo) Replacement waterproof case for 2270 high-torque metal-gear servo. Includes gaskets. Does not fit other servos.

119,-

139,-

KJØP

-14%

Traxxas 2272 Gear Set Metal for Servo 2270

Art.nr: TRX 2272

Copied

Gear Set Metal for Servo 2270 Gear set (for 2270 waterproof servo) Replacement metal gear set for 2270 Servo. Does not fit other servos.

219,-

KJØP

Traxxas 2660 Long Big Bore Shocks w/o Springs (2)

Art.nr: TRX 2660

Copied

These are LONG BIG BORE SHOCKS by Traxxas. They may be used with the many Taxxas cars. FEATURES: Pre-assembled shocks only require filling with included oil, attaching included spacers and (not included) springs. Big-bore long shocks are hard-anodized and teflon coated T-6 aluminum. INCLUDES: Two Shock Caps (aluminum) One Silicone Oil Bottle Two Cylinders (aluminum) 1-1/2" Three Diaphragms (black rubber) Three Large C Clips Two Ball Ends (white plastic) Three Flat Washers (nylon) 6mm Two Bushings (metal) Two Spacers (teflon) 5mm Four Pistons (black plastic) Six "O" Rings (blue) Two Spring Retainers (plastic) Two Flat Washers (nylon) 5mm Two Spring Spacers (black plastic) Five Small E Clips Two Shock Shafts (1-3/4"x1/8") approximately Twelve Spring Adjusters (various size) REQUIRES: Springs C ring or needle nose pliers Tweezers

389,-

419,-

Ikke på lager

-7%

Traxxas 2662 XX Long Big Bore Shocks w/o Spring (2)

Art.nr: TRX 2662

Copied

This is a pair of the XX Long Big Bore Shocks for Traxxas Off-Road Vehicles and the Stampede Truck Kits. FEATURES: Hard anodized teflon coated T-6 aluminum shock bodies with pistons and ball ends pre-installed. Metal shock caps. INCLUDES: Two each 8mm, 4mm, 3mm, 2mm, 1.5mm and 1mm plastic spacers. One bottle of shock oil (no weight specified). Two spring retainers. Two spring washers. Two shock pistons. Two shock mounting collars Two washers. REQUIRES Shock springs.

369,-

399,-

KJØP

-8%

Traxxas 2664 Shock Cylinder Big Bore Long

Art.nr: TRX 2664

Copied

Big Bore shock cylinder (long) (1)

95,-

KJØP

Traxxas 3458 Heat Sink for Velineon 3500 & 540XL

Art.nr: TRX 3458

Copied

Traxxas Heat sink - fits #3351R (Velineon 3500) and #3461 (Velineon 540XL) brushless motors The 3458 heat sink fits Velineon brushless motors #3351R and #3461 when installed in 4X4 vehicles. (Does not fit 2WD configurations). For more information on installing the heatsink and fan shroud, read the following article.

129,-

KJØP

Traxxas 3642 Shoulder Screws 3x12x5mm (6)

Art.nr: TRX 3642

Copied

This is a Package of 3x12x5mm Shoulder Screws for many Traxxas Vehicles. FEATURES: Black steel construction Screws are half-threaded/half-smooth Phillips head INCLUDES: Six 3x12x5mm shoulder screws SPECS: Length: 12mm (.47") Diameter: 3mm (.12") Thread Length: 5mm (.20")

39,-

Ikke på lager

Traxxas 3643R Turnbuckle Complete Alu Red Camber Link ...

Art.nr: TRX 3643R

Copied

Camber links, front (TUBES red-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1)

439,-

459,-

KJØP

-4%

Traxxas 3690 LED Lights Front (for LED-special Bumper)

Art.nr: TRX 3690

Copied

Traxxas 3690 LED Lights Front (for LED-special Bumper) LED light bar, front (assembled)/ 3x8 BCS (2)/ 2.5x8 BCS (2) (requires front bumper #5835X for 2WD Slash®, #3635 for 2WD Stampede®, #3630 for 2WD Bigfoot® No. 1, #6835X for 4WD Slash®, or #6735 for 4WD Stampede®)

239,-

259,-

KJØP

-8%

Traxxas 3943X Pinion Gear 13T-32P Hardened Steel

Art.nr: TRX 3943X

Copied

Gear, 13-T pinion (32-p), heavy duty (machined, hardened steel)/ set screw For some drivers, “heavy duty” just won’t cut it. When you drive on the ragged edge, you need parts that can withstand the brutal punishment that LiPo power can dish out. If full-throttle is the only language you know, Traxxas introduces a new line of pinion gears just for you. These gears come machined out of hardened steel in large 32-pitch format for your most hardcore bashing needs. They are available for Slash and Stampede 4X4 models as well as brushed versions of E-Revo and E-Maxx etc.

89,-

KJØP

Traxxas 5351 Slipper Pressure Plate & Hub Alloy

Art.nr: TRX 5351

Copied

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo. These are part of the slipper assembly. FEATURES: Aluminum construction INCLUDES: One slipper pressure plate One slipper hub REQUIRES: Installation onto vehicle.

99,-

Ikke på lager

Traxxas 5352A Heavy Duty Rebuild Kit Revo/Maxx Trucks

Art.nr: TRX 5352A

Copied

Traxxas 5352A - Rebuild kit, slipper clutch (steel disc/ friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1)) The slipper clutch rebuild kit includes a new steel disc, friction pads (3), spring, pin, 5x8 washer, 4 mm locking nut, and 5 mm locking nut. Fits 5351 pressure plate and hub. Traxxas Slipper Clutch Rebuild Kit Revo/T-Maxx Traxxas Slipper Clutch Rebuild Kit Revo/T-Maxx

99,-

KJØP

Traxxas 5827X Hold down, battery/ hold down retainer

Art.nr: TRX 5827X

Copied

This extended battery hold down for the Slash or Slash 4x4 allows for lipo packs of up to 42mm tall to fit in the stock tray. Allows for installation of taller, multi-cell batteries

75,-

KJØP

Traxxas 5848-RNR Body Slash 4x4 Rock n Roll (for ...

Art.nr: TRX 5848-RNR

Copied

Traxxas 5848-RNR Body Slash 4x4 Rock n Roll (for Clipless Mounting) Body, Slash 4X4 (also fits Slash VXL & Slash 2WD), Rock n' Roll (painted, decals applied) (assembled with front & rear latches for clipless mounting) Is it time to upgrade your Slash® with an all-new look? This clipless polycarbonate body features the hottest ProGraphix® paint with pre-applied decals. There’s no need to trim the body because Traxxas pre-painted bodies come ready to mount right out of the bag. Body comes assembled with front and rear clipless latches. Older Slash chassis without clipless mounts will require 6940 (2WD) or 6976 and 10125 (4X4) in order to mount the body. Accessory part for these models: Slash 4X4 Ultimate (clipless) Slash 4X4 VXL (clipless) Slash Brushless (clipless) Slash VXL (clipless) Slash (clipless) Car Type: Short Course Scale: 1/10 Painted: Yes

919,-

969,-

KJØP

-5%

Traxxas 5862 Big Bore Shocks Slash (4)

Art.nr: TRX 5862

Copied

This is the optional Big Bore Shock Set for the Traxxas Slash. These replace the plastic shocks that come stock with the kit. FEATURES: Strong aluminum construction, teflon coated Anodized black with white springs Completely assembled INCLUDES: Four fully assembled shocks with white springs Mounting hardware One bottle of silicone oil REQUIRES: Filling shocks with shock oil and assembling onto the model

799,-

899,-

Ikke på lager

-11%

Traxxas 5893 LED light harness, rear (requires rear ...

Art.nr: TRX 5893

Copied

LED light harness, rear (requires #5838, 6737X, 6777X, or 6836X rear bumper)

89,-

99,-

KJØP

-10%

Traxxas 6511 Link Bluetooth Wireless Module TQi

Art.nr: TRX 6511

Copied

This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

KJØP

-9%

Traxxas 6552 Seal Kit Telemetry Expander Box

Art.nr: TRX 6552

Copied

Seal kit, expander box (includes o-ring, seals, and silicone grease)

49,-

KJØP

Traxxas 6555 Mount, telemetry expander

Art.nr: TRX 6555

Copied

Mount, telemetry expander (fits Slash 4X4, Stampede 4X4, Rally, Jato)

115,-

KJØP

Traxxas 6730A Chassis Brace Kit Alu Orange

Art.nr: TRX 6730A

Copied

Increase chassis stiffness and impact-handling with the heavy-duty (HD) aluminum chassis brace designed for Slash 4X4 (equipped with low-CG chassis) and Rustler 4X4 models. Made from thick extruded aluminum, the oval-shaped brace increases torsional rigidity and stiffens the chassis to reduce flex. Brilliantly anodized in four high-impact colors, the HD chassis brace provides structural reinforcement for high loads and hard landings. Whether you’re sending it at the skate park, hitting the race track, or launching from a ramp, the heavy-duty chassis brace is built for extreme punishment. Chassis Brace Features: Thick extruded aluminum construction Four bright anodized colors Reduces chassis flex on hard landings Oval shape for increased torsional rigidity Fits Slash 4X4 low-CG models Fits all Rustler 4X4 models

299,-

KJØP

Traxxas 6730G Chassis Brace Kit Alu Green

Art.nr: TRX 6730G

Copied

Increase chassis stiffness and impact-handling with the heavy-duty (HD) aluminum chassis brace designed for Slash 4X4 (equipped with low-CG chassis) and Rustler 4X4 models. Made from thick extruded aluminum, the oval-shaped brace increases torsional rigidity and stiffens the chassis to reduce flex. Brilliantly anodized in four high-impact colors, the HD chassis brace provides structural reinforcement for high loads and hard landings. Whether you’re sending it at the skate park, hitting the race track, or launching from a ramp, the heavy-duty chassis brace is built for extreme punishment. Chassis Brace Features: Thick extruded aluminum construction Four bright anodized colors Reduces chassis flex on hard landings Oval shape for increased torsional rigidity Fits Slash 4X4 low-CG models Fits all Rustler 4X4 models

299,-

KJØP

Traxxas 6730R Chassis Brace Kit Alu Red

Art.nr: TRX 6730R

Copied

Traxxas 6730R Chassis Brace Kit Alu Red Increase chassis stiffness and impact-handling with the heavy-duty (HD) aluminum chassis brace designed for Slash 4X4 (equipped with low-CG chassis) and Rustler 4X4 models. Made from thick extruded aluminum, the oval-shaped brace increases torsional rigidity and stiffens the chassis to reduce flex. Brilliantly anodized in four high-impact colors, the HD chassis brace provides structural reinforcement for high loads and hard landings. Whether you’re sending it at the skate park, hitting the race track, or launching from a ramp, the heavy-duty chassis brace is built for extreme punishment. Chassis Brace Features: Thick extruded aluminum construction Four bright anodized colors Reduces chassis flex on hard landings Oval shape for increased torsional rigidity Fits Slash 4X4 low-CG models Fits all Rustler 4X4 models

299,-

KJØP

Traxxas 6730X Chassis Brace Kit Alu Blue

Art.nr: TRX 6730X

Copied

Increase chassis stiffness and impact-handling with the heavy-duty (HD) aluminum chassis brace designed for Slash 4X4 (equipped with low-CG chassis) and Rustler 4X4 models. Made from thick extruded aluminum, the oval-shaped brace increases torsional rigidity and stiffens the chassis to reduce flex. Brilliantly anodized in four high-impact colors, the HD chassis brace provides structural reinforcement for high loads and hard landings. Whether you’re sending it at the skate park, hitting the race track, or launching from a ramp, the heavy-duty chassis brace is built for extreme punishment. Chassis Brace Features: Thick extruded aluminum construction Four bright anodized colors Reduces chassis flex on hard landings Oval shape for increased torsional rigidity Fits Slash 4X4 low-CG models Fits all Rustler 4X4 models

299,-

KJØP

Traxxas 6742G Toe Link Alu Green Front & Rear ...

Art.nr: TRX 6742G

Copied

Toe links (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (87mm) (2)/ rod ends, rear (4)/ rod ends, front (4)/ aluminum wrench (1) Rustler/Hoss 4x4

439,-

KJØP

Traxxas 6753 Stub Axle Rear 1/10 Rally VXL

Art.nr: TRX 6753

Copied

This is the Stub Axle, Rear, Steel-splined Constant Velocity For the Traxxas 1/10 Rally VXL FEATURES Made of steel INCLUDES One stub axle SPECIFICATIONS Length: 38mm Diameter, bell end: 12mm (1/2") shaft: 5.0mm (3/16") threads: 3.9mm (5/32") Length of thread: 9.3mm (3/8")

99,-

KJØP

Slash 4x4 Ultimate Low-CG Chassi

Populært i denne kategorien

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Kategorier

Nylige søk

Søkeresultater

Slash 4x4 Ultimate Low-CG Chassi

Populært i denne kategorien

Totalt:

Tamiya El-biler

Kyosho-Biler

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler

WL-Toys

HAIBOXING Biler

Helion-biler

BSD Biler