This is the Axial 55T Rock Crawler Electric Motor.
FEATURES: Equip or upgrade the Axial AX10 RTR or other rock crawlers for more
low end pull and slower speed while crawling than stock 27 turn
motors
Preinstalled bullet connectors, no soldering required
INCLUDES: Axial 55T Rock Crawler Electric Motor with bullet connectors
REQUIRES: Compatible speed control for rock crawler motors
SPECS: Shaft Diameter: 3.2mm (0.12")
Shaft Length: 12.5mm (0.49")
Can Diameter: 36mm (1.4")
Can Length: 50.75 (2")
Weight: 164g (5.8oz)
Mounting Pattern: 25mm (0.98" )
Wire length: 115mm (4.5")
Input Voltage: 4+ cells (12VDC) max
This is a pair of 1.9 Internal Wheel Weight Inserts from Axial.
FEATURES: Fits all Axial 1.9" beadlock wheels
For use with the #AX30547 Wheel Weight Rings
Fine tunes weight when used with the Wheel Weight Rings
Recommended for use on the front wheels to help with climbing by
lowering the center of gravity
Steel construction
INCLUDES: Two 1.9 Internal Wheel Weight Inserts
REQUIRES: Fastening to inner part of wheel
SPECS: Weight of Each Insert: 0.33oz (9g)
This is the Axial 24T Aluminum Servo Horn for Hitec Servos.
FEATURES: Hard anodized aluminum construction
Compression mount, two screws install on either side of arm and
tighten center hole around servo spline
INCLUDES: Axial 24T Aluminum Servo Horn with two Socket Head Screws
SPECS: Length: 0.94" (24mm) from center of servo mounting hole to end of arm
Axial’s new heavy duty motor plate is for any vehicle running our AX10 transmission. CNC machined from 4.5mm thick billet aluminum, with integrated heatsink fins to help motors run cooler on those all day expeditions. A must have for any R/C overland adventurist!
• CNC Machined for precision
• Hard anodized for durability
• Direct replacement for stock AX10, SCX10 and Wraith motor plates
• Machined fins help dissipate heat from motor for cooler running temperatures
• Includes two cap head screws and heavy duty machined aluminum washers
Light up the night and add a touch of realism to your scale R/C with
this LED light string set. Set includes 2-white string, 4-white string and 2-red string.
• Compatible with AE-5L ESC (AX31480)
• 3 light strings, 8 LED’s total
• Genuine Axial Product
NOTE: NOT COMPATIBLE WITH OTHER AXIAL OR THIRD-PARTY LIGHT CONTROLLERS.
MIP X-Duty™, Center Drive 12.3" W.B., Axial SCX10 II Kit #18325
Replace those plastic stock drive shafts with a high-quality drive shaft. Introducing the new center drive kit for the Axial SCX10 II from MIP! Made out of high quality, heat treated Alloy Steel and black oxide coated, our center drive kit is completely rebuildable and built to last! Designed for competition crawling or backyard bashing, you can drive with confidence knowing you have a brand you can trust, MIP!
Durability Proven X-Duty™ Design
Fits Forward Trans only with 12.3 WB
Able to run high power and big tires without worrying about axles twisting and breaking when locked up in the rocks
Heavy Design keeps center of gravity lower something needed when crawling steep sections.
- If you have 11.4 ~ 12.0 WB, you will need x1 https://www.miponline.com/MIP-X-Duty-Male-Bone-65mm-1-18104
- MIP X-Duty™ kits are rated for max 4S Lipos.
-
World Class Products, Precision Tools, Race Proven Performance, Thats MIP!
This is a Universal LED Headlight & Tail Light Kit for Crawlers. Pro-Line is proud to introduce the new Universal Headlight and Tail Light Kit with real, working LED Lights perfect for your Crawler! If you are like us, you want to use your RC car at any time of the day or night and this Light Kit allows you to do that while adding even more Scale Realism. This light kit includes 4 LED Light bulbs – 2 White lights for the head lights and 2 Red lights for your tail lights – and the lights are pre-wired to plug directly into your receiver (5V-6V) for power. The LED Lights can be housed in 5 different sets of optional front or rear Black Nylon light buckets that have been designed to fit most Rock Crawling Bodies. The LED's are secured into the Light Buckets with the included screws and the Light Buckets can be installed inside the body with flexible adhesive or double-sided tape. Night crawling is all the rage, so you don't want to get left in the Dark! Get Pro-Line's new Universal LED Headlight and Tail Light Kit for your truck today!
Features
Real, Working Headlight and Tail light LED Kit for your Rock Crawler
White LED's for the Headlights and Red LED's for the Tail lights
Can Plug Lights Directly into your Receiver Plug for Easy Install
Includes Mounts and Hardware for Custom Install
5 Different Types of Front or Rear Light Buckets Included
Light Buckets Made from Black Nylon Plastic for Durability
Adds Scale Realism to your Rock Crawler
Included
Pre-wired LED Lights (1 pc)
Light Bucket Plastic Tree (1 pc)
M2.5 x 3 BHCS (4 pcs)
Proline 6314-00 1/10 Scale Recovery Tow Strap with Duffel Bag for Crawlers
In The Box
Scale Recovery Tow Strap (1 pc)
Scale Duffel Bag (1 pc)
Key Features
D-Ring for Quick Connect
Kinetic Strap Material for "softer" and More Effective Tows
Scale Hooks and Abrasion Wraps
Pro-Line Logo Imprint
Includes Scale Duffel Bag with Velcro Opening
Retracting Key Chain Loop for Use as a Scale Accessory
Overview
This is a Scale Recovery Tow Strap and Bag. Pro-Line is proud to introduce the Scale Recovery Tow Strap that is perfect for you next Scale Adventure! Developed and tested by the most hardcore scale guys, Pro-Line's new Tow Strap has the Scale looks, features, and performance that every Scale Rig needs to get out of tough spots. The Tow Strap features a metal D-Ring for quick attachments to larger tie-off points and the Kinetic strap material allows for "softer" and more effective tows. Each end has scale metal hooks and abrasion wraps have been sewn around the hooks and D-Ring for longer lasting performance. The Scale Recovery Tow Strap has been finished off with an imprinted Pro-Line logo and can be stored in the included Scale Duffel Bag on your key chain or attached to your rig as another Scale Accessory. Get your very own official Scale Recovery Tow Strap with Duffel Bag now!
Product Specifications
Scale
1/10
Vehicle Type
Rock Crawler
Mountable Trash Bag for Spare Tire (Tan)
Specifications:
Weight: 0.54oz / 15.3g
What's Included:
1x Mountable Trash Bag for Spare Tire (Tan)
Optional Colors:
Mountable Trash Bag for Spare Tire (Grey) (VVV-C0735)
Notes:
Fits the tires whose OD are 75mm-100mm
To stk. kroker for vinsj med festebolt og splint. Passer TFL 1:10 vinsjer og tilsvarende løsninger. Forskjell i matt og klar versjon er kun en liten nyanseforksjell i fargen.
TFL leverer høypresisjons oppgraderingsdeler i metall. Delene er svært detaljerte og i ypperste kvalitet. I vareutvalget finnes både options og upgrades for kjente crawlere fra andre produsenter, og selvsagt til TFL sin egen crawlerserie. Ved bruk av gjengede deler/skruer hvor metall går mot metall anbefaler vi bruk av gjengelim/locktite.
Passer til
Oppgradering bil1:10 Skalatilbehør
Oppgradering bilAxial SCX10
1/10 Aluminum White Super Bright LED Light Bar 85mm Red For RC Truck Crawler
Super bright LED bar in aluminum housing for durability on rough trails when flipping your rig over!
Features:
Material : Aluminum
Color : Red
Voltage : 7V to 12V
Led : White
Total Length : 85mm
Includes:
Light Bar (1 pc)
Mounting Bracket (1 pc)
1/10 RC Rock Crawler Accessories Nylon Cable Strap With Buckle and Spring Loaded Hook
You can easily adjust the nylon cable strap to the length you desire, making your crawler more realistic and enable your crawler to haul your accessories bucket, etc. like a real car would.
Features:
For: 1/10 Rock Crawler
Material: Nylon
Color: Dark Gray
Includes:
Yeah Racing 1/10 RC Rock Crawler Accessories Nylon Cable Strap With Buckle and Spring Loaded Hook (1 pc)
Yeah Racing 1/10 RC Rock Crawler Accessory Big Oil Tank
Description:
This is Yeah Racing 1/10 RC Rock Crawler Accessory Big Oil Tank.
*Photos for reference only.
Feature:
For: 1/10 RC Rock Crawler
Material: Plastic
Color: Red
Include:
Yeah Racing 1/10 RC Rock Crawler Accessory Big Oil Tank (1 pc)
Yeah Racing 1/10 RC Rock Crawler HD Full Metal Steel Wired Winch Control Unit Type A
Description:
This is Yeah Racing 1/10 RC Rock Crawler HD Full Metal Steel Wired Winch Control Unit Type A #YA-0386. This winch offers ultra scale looks, superior quality and craftsmanship. It winds up or out of the wire cable, allowing you to tow objects or another off-road car stuck in the mud. It works with Yeah Racing 1/10 Wireless Remote Receiver Winch Control Set #YA-0389.
Features:
For: 1/10 RC
Material: Full Metal Steel Wired
Color: Pre-painted
Specifications:
Length: 6.5cm
Width: 2.5cm
Height: 2cm
Load Limits: Dead Lift 2.5-3kgs
Requires:
Yeah Racing 1/10 Wireless Remote Receiver Winch Control Set #YA-0389
Includes:
1/10 RC Rock Crawler HD Full Metal Steel Wired Winch Control Unit Type A #YA-0386 (1 set)
Yeah Racing 1/10 RC Rock Crawler Scale Spring Loaded Metal Hook Red
Easy to build spring loaded scale hooks for your crawler! Features an opening of 3mm to hook onto roofracks etc. Steel construction with metal paint to mimic the look of the hooks used in real vehicles.
Features:
For: 1/10 Scale Crawlers
Material: Steel
Color: Red
Includes:
Spring Loaded Metal Hook (1 pc)
Yeah Racing 110mm Desert Lizard Two Stage Internal Spring Damper Pair Green For Crawler
Description:
Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers, comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to setup your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig which will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge which will prevent shock oil leakage!
Feature:
For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers
Material: Aluminum
Normal length : 110mm
Compressed length : 83mm
Stretch length : 120mm
Include:
Yeah Racing 110mm Desert Lizard Two Stage Internal Spring Damper (2 pcs)
Springs (16 pcs)
Pistons (8 pcs)
Mounting Hardware (1 pack)
Yeah Racing Stainless Steel Front or Rear Differential Protector For Axial SCX10 II
Description:
Optional Diff Protector from Yeah Racing to provide protection to your axle on your Axial SCX10 II!
Features:
For: Axial SCX10 II AR44 Axle
Material: Stainless Steel
Color: Silver
Not Compatible with AXSC-011
Includes:
Differential Protector (1 pc)
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper Pair Black For 1/10 Crawler 'G6 Certified'
Description:
Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers, comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to setup your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig which will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge which will prevent shock oil leakage!
Features:
For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers
Material: Aluminum
Includes:
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper (2 pcs)
Springs (16 pcs)
Pistons (8 pcs)
Mounting Hardware (1 pack)
Note:
The pre-installed spring combo is for heavy rigs, we recommend experimenting with different spring combinations with what works with your rig weight and tire combination.
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper Pair Gun Metal For 1/10 Crawler 'G6 Certified'
Description:
Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers, comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to setup your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig which will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge which will prevent shock oil leakage!
Features:
For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers
Material: Aluminum
Includes:
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper (2 pcs)
Springs (16 pcs)
Pistons (8 pcs)
Mounting Hardware (1 pack)
Note:
The pre-installed spring combo is for heavy rigs, we recommend experimenting with different spring combinations with what works with your rig weight and tire combination.
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper Pair Green For 1/10 Crawler 'G6 Certified'
Description:
Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers, comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to setup your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig which will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge which will prevent shock oil leakage!
Features:
For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers
Material: Aluminum
Includes:
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper (2 pcs)
Springs (16 pcs)
Pistons (8 pcs)
Mounting Hardware (1 pack)
Note:
The pre-installed spring combo is for heavy rigs, we recommend experimenting with different spring combinations with what works with your rig weight and tire combination.
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper Pair Orange For 1/10 Crawler 'G6 Certified'
Description:
Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to set up your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig that will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge that will prevent shock oil leakage!
*Photos for reference only.
Feature:
For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers
Material: Aluminum
Include:
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper (2 pcs)
Springs (16 pcs)
Pistons (8 pcs)
Mounting Hardware (1 pack)
Note:
The pre-installed spring combo is for heavy rigs, we recommend experimenting with different spring combinations with what works with your rig weight and tire combination.
Manual:
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper Pair Red For 1/10 Crawler 'G6 Certified'
Description:
Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers, comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to setup your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig which will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge which will prevent shock oil leakage!
Features:
For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers
Material: Aluminum
Includes:
Yeah Racing 90mm Desert Lizard Two Stage Internal Spring Damper (2 pcs)
Springs (16 pcs)
Pistons (8 pcs)
Mounting Hardware (1 pack)
Note:
The pre-installed spring combo is for heavy rigs, we recommend experimenting with different spring combinations with what works with your rig weight and tire combination.
Yeah Racing 100mm Desert Lizard Two Stage Internal Spring Damper Pair Black For Crawler #DDL-100BK
Description:
Introducing the Yeah Racing Desert Lizard internal spring shock for crawlers, comes pre-assembled for easy upgrading your current rig! Comes with a full set of springs and machined pistons for you to setup your rig for all sorts of different conditions! Included are springs for you to build either a droop or a sprung setup, a sprung setup will create a rig which will generate a lot of flex and more suspension travel. For the droop setup, your rig will sit lower and because of a spring under the piston, will be less prone to rolling over but will generate less flex. Featuring a triple O-Ring sealing cartridge which will prevent shock oil leakage!
Feature:
For: HPI Crawler King / Gmade R1 KOMODO / Vaterra K5 / AXIAL SCX10 / RC Crawlers
Material: Aluminum
Include:
Yeah Racing 100mm Desert Lizard Two Stage Internal Spring Damper (2 pcs)
Springs (16 pcs)
Pistons (8 pcs)
Mounting Hardware (1 pack)