Børste regulator

Art.nr: BULK 45069

Copied

TAMIYA 45069 RC BRUSHLESS ESC 04S This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over. High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected. Setup is shown by an LED, and the ESC also features two protection functions. Maximum continuous current: 75A Input voltage: 6.6V - 7.2V Dimensions: 41.5mm x 33.4mm x 18mm Weight: 45g (including cables) • Sensored brushless ESC detects motor rotor positions with precision, enabling more efficient power supply and smoother motor response. • Compatible with Tamiya brushless motors (sensored) of 21.5+ turns, and Tamiya brushed motors 25 turns and over. • Choose from 10 different settings for both neutral brake and brake, to get your setup just how you want it. • Features overheating and overload protection functions to help ensure that your equipment avoids damage. • Weight: 47g (including cables) • Compatible with Ni-Cd, Ni-MH and Tamiya Li-Fe battery packs. • Dimensions: 41.5 x 33.4 x 18mm LO/HI Battery Cut-off Information: LOW & HIGH Battery Low Voltage Protection Feature: LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry) HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries) SPECIFICATIONS Electronic Speed Control (esc)  Maximum continuous current: 75A Input voltage: 6.6V - 7.2V Dimensions: 41.5mm x 33.4mm x 18mm Weight: 45g (including cables) Special Feature 1 LOW & HIGH Battery Low Voltage Protection Feature: LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry) HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries)

På lager 2

Art.nr: 45069

Copied

TAMIYA 45069 RC BRUSHLESS ESC 04S This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5T and over, (Aftermarket brands 21.5 and over), and also brushed motors 25T and over. High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected. Setup is shown by an LED, and the ESC also features two protection functions. Maximum continuous current: 75A Input voltage: 6.6V - 7.2V Dimensions: 41.5mm x 33.4mm x 18mm Weight: 45g (including cables) • Sensored brushless ESC detects motor rotor positions with precision, enabling more efficient power supply and smoother motor response. • Compatible with Tamiya brushless motors (sensored) of 21.5+ turns, and Tamiya brushed motors 25 turns and over. • Choose from 10 different settings for both neutral brake and brake, to get your setup just how you want it. • Features overheating and overload protection functions to help ensure that your equipment avoids damage. • Weight: 47g (including cables) • Compatible with Ni-Cd, Ni-MH and Tamiya Li-Fe battery packs. • Dimensions: 41.5 x 33.4 x 18mm LO/HI Battery Cut-off Information: LOW & HIGH Battery Low Voltage Protection Feature: LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry) HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries) SPECIFICATIONS Electronic Speed Control (esc)  Maximum continuous current: 75A Input voltage: 6.6V - 7.2V Dimensions: 41.5mm x 33.4mm x 18mm Weight: 45g (including cables) Special Feature 1 LOW & HIGH Battery Low Voltage Protection Feature: LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry) HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries)

** Ikke på lager

Art.nr: 45070

Copied

This ESC is designed for use with Tamiya Brushless Motors (Sensored) 15.5 turn and over, (Aftermarket brands 21.5 turn and over), and also brushed motors 23T and over. High point, neutral brake and brake settings are individually adjustable, while battery cut-off, reverse and motor modes can be selected. Setup is shown by an LED, and the ESC also features two protection functions and a cooling fan. ★Maximum continuous current: 75A ★Input voltage: 6.6V - 7.2V ★Dimensions: 41.5mm x 33.4mm x 27mm ★Weight: 56g (including cables) ★With cooling fan • Sensored brushless ESC detects motor rotor positions with precision, enabling more efficient power supply and smoother motor response. • Compatible with Tamiya brushless motors (sensored-type), and Tamiya brushed motors 23 turns and over. • Choose from 10 different settings for both neutral brake and brake, to get your setup just how you want it. • Features overheating and overload protection functions to help ensure that your equipment avoids damage. • Weight: 56g (including cables) • Compatible with Ni-Cd, Ni-MH and Tamiya Li-Fe battery packs. • Dimensions: 41.5 x 33.4 x 27mm • [Basic specifications] Continuous maximum current 75A Output: 100% forward / 50% reverse Input voltage 6.6-7.2V Size 41.5 x 33.4 x 27mm Weight 56g (including cords) Cooling fan is standard equipment. LO/HI Battery Cut-off Information: LOW & HIGH Battery Low Voltage Protection Feature: LOW battery setting cuts off @ 5.6 volts approximately. (Best for Ni-CD, NI-MH and Li-FE battery chemistry) HIGH battery setting cuts off @ 6.2 volts approximately. (Best for other battery chemistries)

** Ikke på lager

Art.nr: 45057

Copied

This ESC is especially designed for use with the TBLM series of Tamiya Brushless Motors (Sensored-Type, 10.5T, 12.5T, 14.5T, 16.5T). Brake and neutral brake settings can be adjusted independently, and it features 3 protection systems against overheating, overloading and low voltage. It is also compatible with brushed motors (Normal Type 540 and Sports-Tuned Motors 25 Turn or higher). Note: When using servos with a current exceeding 1.5A, BEC output may be shut down.

** Ikke på lager

Art.nr: BULK 45057

Copied

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Tamiya packaging ***   NB NB denne kommer uten sensorkabel.   This ESC is especially designed for use with the TBLM series of Tamiya Brushless Motors (Sensored-Type, 10.5T, 12.5T, 14.5T, 16.5T). Brake and neutral brake settings can be adjusted independently, and it features 3 protection systems against overheating, overloading and low voltage. It is also compatible with brushed motors (Normal Type 540 and Sports-Tuned Motors 25 Turn or higher). Note: When using servos with a current exceeding 1.5A, BEC output may be shut down.

På lager 1

Art.nr: 45054

Copied

This is the Tamiya TEU-106BK Twin Motor Electronic Speed Control.     FEATURES Forward and reverse operation for twin motor R/C vehicles such as the  Tamiya DualHunter and Super Clod Buster  Built-in BEC  Button allows setting of forward/reverse, high points and neutral  position  Reverse can be disabled  Battery cut-off function to prevent over-discharging  Compatible with LF batteries   INCLUDES Tamiya TEU-106BK Twin Motor ESC, Aluminum Heat Sink, two sets of 4mm  Female Bullet Connectors, On/Off Switch, Tamiya Battery Connector,  Universal Receiver Connector and Instructions   SPECIFICATIONS  Control System: High frequency wave (1kHz)  Max Continuous Current (FET Spec): Forward 150A, Reverse 75A  Input Voltage: 6.6-7.2V  Compatible Motors: Up to two Sport Tuned motors over 25 turns  Driving Frequency: 1kHz  Receiver Output: 6V/2A BEC  Dimensions: 1.4 x 1.44 x 1.1" (35.0 x 36.5 x 29mm)  Weight: 2.08oz (59g)

** Ikke på lager

Art.nr: 53957

Copied

This is the Tamiya MFC-02 Multi-Function Control Unit for use with the                      Ford F-350 Pickup Truck FEATURES: Provides many light, sound effects and special operations to make             the Ford F-350 even more realistic           Light Effects;             Ten types of high-brightness LEDs depict light actions such as             headlights, auxiliary lights, turn signals, fog lights and more           Sound Effects;             Onboard speaker emits 24 different sound effects such as starting,             stopping, gear changing, horn, idling and more           Special Operations;             Up to 16 different operations possible with 4-channel transmitter             including steering and throttle control, brake operation, gear             shifting and more           Other features include vibration function, input terminal to allow             connection of MP3 and CD players for music playback, three modes of             operation; R/C mode with Multi-Function effects off, R/C mode with             Multi-Function effects on, and Demo Mode for static display             sound and light effects INCLUDES: Multi-Function Control Unit, Control Unit, Vibration Unit, Speaker             Unit, Vibration Unit Box, Lights and instruction manual REQUIRES: 4-channel self-neutral stick radio system COMMENTS: NOT compatible with the Tamiya #53909 and #53937 Light Units.           Compatible only with the 540 motor included in the F-350 truck kit           Cannot be operated with 2 or 3ch radio systems.           Not compatible with PCM transmitters, multi-channel receivers and             older Sanwa black case receivers.

** Ikke på lager

Art.nr: 56511 sound

Copied

  This is the Tamiya Tractor Truck Multi-Function Control Unit (MFC)                   with integrated Electronic Speed Control.              For use on Tamiya 1/14 scale R/C tractor trucks and                    the #56307 Mercedes 1850L delivery truck. FEATURES: Twenty four radio-controlled sounds including, alarms, engine             starting idling and revving, coupler attachment, air brake and more           Nine different types of lights and vibration synchronized with             engine sounds including, head and tail lights, turn signals, speed             indicators, fog, roof, hazard, auxilliary, and back-up lights           Special Operations add five extra features including, engine stop/             start switching, horn/support leg switching, light on/off switching             turn signal/hazard lamp switching, and running/revving switching           2-3/8" (60mm) diameter speaker emits authentic sounds           Electronic speed control enables low speed running for semi coupling           Coupler unit controls sound for loading and unloading of trailer,             speed control raises power during towing mode           Control unit for volume and light adjustment           Vibration unit uses specialized vibration motor with two types of             counterweights INCLUDES: One Tamiya Tractor Truck Multi-Function Control Unit with speaker,             pre-wired lights, vibration, coupler, control units, electronic             speed control and instructions REQUIRES: Tamiya tractor trailer using four channel stick radio, two channel              pistol grip radio with steering wheel will not operate unit. COMMENTS: Designed to be used with four channel stick control radios with self-             neutral system such as those from Futaba, JR, or ACOMS.  Different             brands of radios may not operate unit at maximum efficiency.

Ikke på lager

Art.nr: 56523

Copied

The popular Multi-Function Control (MFC) unit for R/C tractor trucks, which adds a whole extra layer of realism to driving, receives an update. This unit allows transmitter trim levers to be combined with stick control use, meaning you can enjoy lights, sounds and vibrations coordinated with actions while driving your R/C tractor truck model. This version of the MFC features engine sounds which were recorded from a real European truck's L6 diesel engine for amazing realism.   •Features 33 different types of sound, including engine ignition and shutdown, horn, gear changes, brakes, air sound effects and so on. A 60mm-diameter full-range speaker in a resin case provides excellent quality. •Up to 21 actions can be controlled using a 4-channel transmitter. Tamiya Attack 2.4 GHZ Radio System 4-channel recommended for best compatibility. •Light operation and volume adjustment are also possible using the transmitter. •Includes white, red and yellow high brightness LEDs to duplicate truck HID lights with precision. •An ESC has been built in to the unit, enabling realistic running at very low speeds. •The MFC unit can be run in three modes: R/C mode with Multi-Function (lights and sounds) off; Multi mode, with R/C and multi-function on; Demo mode, which allows display of lights and sounds only. •Can be used for support leg operation when employing Item 56505 Motorized Support Legs. •Cannot be used together with Item 53909 TLU-01 or Item 53937 TLU-02 LED light units. •Requires separately sold 4ch transmitter with slide trims, 4ch receiver and 2 servos (3 if using Item 56505). Tamiya Attack 2.4 GHZ Radio System 4-channel recommended for best compatibility.

På lager 1