RPM 70862 Front or Rear A-arms for Prerunner, Teton & ...

Art.nr: 70862

Copied

RPM Front or Rear A-arms for Prerunner, Teton & SST  Replaces stock LaTrax #7630 Quick Notes: Reduced suspension slop Stronger than stock Sold in pairs Replaces stock LaTrax #7630 If you’re looking for an incredibly strong alternative to stock A-arms for your LaTrax Prerunner, Teton or SST, look no further than RPM! Our A-arms are some of the toughest replacements on the planet, backed by a limited lifetime warranty, extremely lightweight and less expensive than any other aftermarket option available. Additionally, they reduce suspension slop for more accurate driving characteristics. All this and proudly Made in the USA! Tech Notes: RPM LaTrax Prerunner / Teton / SST A-arms are sold in pairs and replace stock LaTrax #7630. Two packages will be needed to complete one vehicle.

129,-

KJØP

Savox SW-0267MG Servo 6Kg 0,135s Metal Gear Micro WP

Art.nr: SW-0267MG

Copied

Savöx SW-0267MG - Micro Size Digital Servo, DC Motor, Waterproof, Metal Gears The SW-0267MG is a budget friendly, waterproof, high torque, digital micro servo. The wire enters vertically from the bottom of the case. This is a great upgrade if you're looking to drive your RC vehicle in any condition yet unable to use higher voltage to obtain more power. This is an excellent replacement for Traxxas 2065A/2065R/2065T. Features: 3-Pole Brushed Motor Fast Response Composite Case Ball Bearings Metal Gears Specs: Torque @ 4.8V: 5kg Torque @ 6V: 6kg Speed @ 4.8V: 0.16s/60° Speed @ 6V - 0.135s/60° Size: L22.6 x W12.6 x H23.5mm Weight: 14g

399,-

KJØP

Traxxas 2064R Gear Set Metal for Servo 2065R

Art.nr: TRX 2064R

Copied

Replacement metal gear set for 2065R servo. Gears may also be used to upgrade the 2065A and 2065T servos.   Gears do not fit 2065 or 2065X servos.

249,-

KJØP

Traxxas 2064X Gear set, metal (for 2065X waterproof ...

Art.nr: TRX 2064X

Copied

Dette produktet er erstattet med TRX 2064R Gear set, metal (for 2065X waterproof sub-micro servo)

KJØP

Traxxas 2065R Metal Gear Micro Servo

Art.nr: TRX 2065R

Copied

Traxxas 2065R Metal Gear Micro Servo The new waterproof 2065R metal gear servo is the perfect upgrade for the shifting mechanisms found on TRX-4 and 1/10 Summit models. It is also a great performance steering upgrade for all LaTrax vehicles.   Replaces the 2065X servo Fully waterproof Fits TRX-4 and 1/10 Summit Fits steering in LaTrax models Power: 2.3kg/cm Speed: 0.20 sec/60° All metal geared Fits: Alle TRX-4M 1/18 LaTrax® Desert Prerunner 1/18 LaTrax® Rally 1/18 LaTrax® Teton® TRX-4® 1979 Chevrolet® Blazer TRX-4® 1979 Ford® Bronco TRX-4® 2021 Ford® Bronco TRX-4® Equipped with Traxx® TRX-4® Mercedes-Benz® G 500® 4X4² Summit TRX-4® Scale and Trail™ Crawler TRX-4® Sport Unassembled Kit TRX-4® Sport TRX-4® Unassembled Kit TRX-6® Mercedes-Benz® G 63® AMG 6X6

489,-

529,-

KJØP

-8%

Traxxas 7591 SPUR GEAR, 54-TOOTH

Art.nr: TRX 7591

Copied

Spur gear, 54-tooth

39,-

KJØP

Traxxas 7592 Pinion 14T 1/18 LaTrax

Art.nr: TRX 7592

Copied

Gear, 14-T pinion / set screw

29,-

KJØP

Traxxas 7640 Spur Gear 60T Teton

Art.nr: TRX 7640

Copied

This is the 60T Spur Gear for the LaTrax Teton Monster Truck from Traxxas. FEATURES Composite plastic construction Stock replacement spur gear INCLUDES 60T Spur Gear

39,-

KJØP

Traxxas 7645 Gear 10T Pinion/Set Screw Teton

Art.nr: TRX 7645

Copied

This is the 10 Tooth Pinion Gear and Set Screw for the LaTrax Teton Monster Truck from Traxxas. FEATURES Metal construction Stock replacement pinion gear INCLUDES 10 Tooth Pinion Gear Set Screw Two 3x4mm Phillips Head Screws Metal Plate

29,-

KJØP

Traxxas 7667 Spring, shock (red) (GTR) (0.412 rate)

Art.nr: TRX 7667

Copied

SPRING, SHOCK (RED) (GTR) (0.412 RATE) (1 PAIR)

39,-

KJØP

Traxxas 6530X 4-Channel TQi Transmitter

Art.nr: TRX 6530X

Copied

Traxxas 6530 TQi 2.4Ghz 4-Channel Transmitter w/Link Enabled (Transmitter Only) This is a replacement Traxxas TQi 2.4Ghz 4-Channel Transmitter. The TQi transmitter is compatible with the Traxxas Link Wireless Module (TRX 6511) that turns your iPhone, iPad, or iPod touch into a powerful tuning tool for your Traxxas model. The full-color display combines with the Traxxas Link App to deliver an intuitive, high-definition, full-color graphical user interface that unlocks your radio system for ultimate vehicle control. In addition to adjusting the TQi radio system's advanced features via a visual and intuitive interface, real-time telemetry becomes available through a customizable dashboard. Prepare to unlock the full potential of the TQi 2.4GHz radio system through the Traxxas Link Wireless Module. TQi Transmitter Features: High Output signal for maximum range Integrated internal antenna Simple 2-Button Interface Steering trim and Multi-Function knobs Adjustable steering and throttle percentage (dual rates) Adjustable steering and throttle sensitivity (exponential) Adjustable steering and throttle end points Automatically stores and loads settings for up to 30 Traxxas Link Model Memory enabled models—just switch on and drive, "model selection" is not required. High 13ms frame rate and near-zero latency for responsive control Comfortable ergonomic design Updated steering wheel and foam grip Operates on just 4 AA batteries Traxxas Link Wireless Module Features: Compatible with Apple iPhone, iPad, and iPod touch Use with the powerful Traxxas Link app View real-time telemetry with optional sensors Bluetooth low energy Easy and simple device pairing Powered by TQi transmitter Integrated into transmitter body Quick and easy installation, installs in minutes Traxxas Link Wireless Module included with select Traxxas vehicles Traxxas Link Application Features: Available on the App Store Intuitive iPhone, iPad, and iPod touch interface Customizable Dashboard Dial or digital readout gauges Up to nine gauges can be displayed at one time Set threshold warnings and log maximums, minimums, or averages Review telemetry feedback via the dashboard recording function that includes sound Instant replay feature captures the previous 60-seconds of dashboard activity Recordings can be named and saved See telemetry feedback from electric and nitro models for speed, temperature, and voltage Edit, save, and share drive profiles Visually manage an unlimited number of models with the Traxxas Link App and see: Transmitter model history Model names Customizable settings Profiles Note: This transmitter does not include the Link Wireless Module, it must be purchased separately (TRX 6511). Traxxas offers this transmitter with the wireless module and one TSM (Traxxas Stability Management) receiver (TRX 6507R). 

1.199,-

1.299,-

KJØP

-8%

Yeah Racing YBS-0054 Steel Bearing Set (15pcs) Traxxas ...

Art.nr: YBS-0054

Copied

Yeah Racing YBS-0054 Steel Bearing Set (15pcs) For Traxxas 1/18 LaTrax Teton Description: Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!   Feature:   For : Traxxas 1/18 LaTrax Teton Material : Bearing Steel Shielding: Rubber     Specification:   YB6009B  (4x8x3mm) (2 pcs) YB6015B  (6x10x3mm) (8 pcs) YB6020B  (8x12x3.5mm) (5 pcs)     Include:   Total Bearing (15 pcs)

99,-

119,-

KJØP

-17%