Kyosho Fazer MK2 FZ02 – RC-biler og byggesett | SamiRC

Art.nr: 34418T1B

Copied

  For the pure enjoyment of R / C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can't be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, + 5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles , in addition to the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. ●“Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism. ●New design shaft drive full-time 4WD touring chassis（FZ02）. ●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. ●Equipped with 2-bevel grease-filled gear diffs on front and rear. ●Large size dog bones and cup joints realize superior reliability and durability. ●Belt mounting battery compartment allows various battery types to be used. ●Full ball bearings that reduce drive loss equipped throughout the drive system. ●Features KS202W waterproof steering servo. ●Includes completely finished body with color scheme and decals applied. ●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. ●Performance can be further enhanced by installing various optional parts. Completely new chassis realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck. Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly. Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency. Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths. New design oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control. Equipped with long shock end allows a high ride height to pursue true scale appearance. Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary. As the signature American sports coupe, the Chevrolet Camaro has maintained its popularity around the world. Sold during 1967 to 1969, the Z/28 was the highest specification in the first Camaro model. In addition to its long nose and short deck proportions, the classic coke-bottle front and rear fender lines are beautifully reproduced in 1/10 scale. New design Vintage Touring Car (VTC) tires & Rostyle type wheels to match vintage car style. Comes with the new powerful 550 size 14T brushed motor(G14L). The long can with Steel ring around the motor case and internal cooling fan provides efficient torque and high speeds. TECHNICAL DATA ■Length 507mm ■Width 195mm(Body width:210mm) ■Wheelbase 260mm ■Tread (F/R) F：167mm／R：167mm ■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm ■Gear Ratio 6.54：1 ■Weight  1650g (approx.) ■R/C system      Syncro KT-231P+ ■Motor      G14L

På lager 2

Art.nr: 34428T1B

Copied

Kyosho 34428T1B Fazer MK2 Mazda Savanna RX-3 1972 Tuned Ver. 1:10 Readyset T1 Now driving R/C is even more fun FZ02 chassis with realistic racing car body For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. ●“Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism. ●A tuned version based on the 1971 Mazda Savanna GT, equipped with front and rear overfenders and a rear spoiler. ●The separately sold LED light unit (97054) can be attached to the front and rear light buckets, making it even more scaled. ●Vintage Touring Car (VTC) tires and the custom 8-Spoke Watanabe Wheels for the Hakosuka GT-R are the perfect match for this vintage car. ●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. ●Full ball bearings that reduce drive loss equipped throughout the drive system. ●Features KS202W waterproof steering servo. ●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. ●Shaft drive full-time 4WD touring chassis（FZ02）. ●Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale. ●Uses button screws with hexagonal holes in each part. Reliable tightening torque can be applied, and maintenance is possible with even fewer tools. ●Since the motor mount has mounting holes according to the pinion gear, troublesome backlash adjustment is unnecessary. Supports from 29T to 37T. ●Performance can be further enhanced by installing various optional parts. Equipped with a 2-rotor rotary engine producing 120 horsepower, the MAZDA Savanna GT was one of the fastest Japanese made cars of the 1970’s. Beautiful flowing lines with sharp over fender and air spoiler combined to create its unique and formidable style. Vintage Touring Car (VTC) tires and the custom 8-Spoke Watanabe Wheels for the Hakosuka GT-R are the perfect match for this vintage car.The headlights and rear combination lamps use transparent injection parts with lens cuts, and can accommodate the installation of the separately sold 97054 LED light unit series in the light buckets. By attaching clear 4-lamp units to the front and red 4-lamp units to the rear, the body transforms into one that exudes a realistic vehicle feel. (Recommended LED light unit: 97054-4CR×2) Completely realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck. Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly. Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths. Equipped with an oil shocks as standard equipment. Change the vehicle height by changing the length of the damper end according to the vehicle type. Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary. Specifications: ■Length 459mm ■Width 200mm(Body width * Excluding mirrors) ■Height 136mm ■Chassis Height 7mm(approx.) ■Wheelbase 260mm ■Tread (F/R)  167mm ■Tires (F/R)  φ64×27.7mm ■Gear Ratio 6.54：1 ■Weight  1650g (approx.) ■R/C system &; Syncro KT-231P+ ■Motor G14L Kit Contents: ●Completed chassis with R/C radio installed ●Factory assembled body complete with color scheme ●Syncro KT-231P+ transmitter ●Hexagonal wrench ●Spanner ●Setting change parts Required for Operation: ●4 x AA batteries for transmitter ●Battery for chassis (recommended: 7.2V Ni-MH battery) ●Charger for battery for chassis ●Tools  

På lager 1

Art.nr: 34461C

Copied

34461 Fazer Mk2 FZ02 Chassis KIT NB! Ingen radio,body eller motor esc.   Electric 1:10 On-Road TC Roller Discover the ultimate fusion of performance and customization with the Kyosho EP Fazer Mk2 1/10 Electric Touring Car Rolling Chassis Kit—an advanced, partially assembled racing platform designed to deliver unmatched handling, durability, and flexibility for R/C enthusiasts of all levels. About the EP Fazer Mk2 Roller Kit   Chassis The Kyosho EP Fazer Mk2 1/10 Electric Touring Car Rolling Chassis Kit is crafted for enthusiasts who appreciate both high performance and customizability. This kit is 40% pre-assembled, with key components like shocks and differential gears left unfilled with oil, allowing racers to fine-tune their settings according to personal preferences. The design prioritizes a low center of gravity, which significantly enhances handling and stability, which is especially important during high-speed maneuvers. The chassis is built from high-impact nylon material, which not only reduces weight but also improves the durability and impact resistance of the vehicle. The deckless layout simplifies maintenance by reducing the number of components and consolidating screw sizes, making disassembly and adjustments more efficient. Drivetrain & Suspension The drivetrain and suspension of the Kyosho EP Fazer Mk2 are meticulously designed to deliver superior performance. The FZ02 chassis features a high-strength, torsionally rigid structure with front and rear stiffeners and rib reinforcements at critical points, ensuring robust performance under various racing conditions. The inclusion of oil shocks and adjustable springs allows for precise tuning of the front-rear geometric balance, resulting in light, responsive handling. The front suspension is optimized to reduce bump steer and scrub radius, enhancing control and consistency during tight turns. Additionally, the ball-connected steering knuckle design ensures reliable steering performance, while interchangeable front-rear and left-right hub carriers improve parts efficiency and ease of maintenance. Optional Performance Hop-ups The Kyosho EP Fazer Mk2 comes equipped with several high-performance optional parts, elevating its capabilities and appeal. The Duralumin HD TC center shaft S (FAW209) replaces the standard resin shaft, providing increased rigidity and smoother power transmission. This upgrade not only enhances driving performance but also adds a striking visual element with its red anodized finish. The TC Universal swing shafts (FAW202) on the front drive section offer consistent drive transmission even at wide steering angles and prevent dropouts during heavy contact, ensuring reliable performance in competitive racing scenarios. Additional features such as the special resin transponder mounting stay, body mounts for various body types, and aluminum motor dust plate for effective heat dissipation further underscores the kit’s versatility and race-readiness. These enhancements make the Kyosho EP Fazer Mk2 an exceptional choice for both seasoned racers and casual R/C enthusiasts looking to build a high-performance, customizable touring car. Features: Factory partially assembled roller chassis Low center of gravity design with high strength and rigidity Aluminum HD center driveshaft TC universal swing shafts Special resin transponder stay mount Optional body mounts for compatibility with various body types Super lightweight and durable aluminum motor plate Aluminum Oil-filled shocks Aluminum TC universal driveshafts <Technical Data> - Length 375mm - Width200mm/190mm - Ground clearance 8mm (approx.) - Wheelbase 260mm - Tread（Body width:190mm）F:164mm/R:164mm - Tread（Body width:200mm）F:174mm/R:174mm - Tires F: φ66mm x 25mm/R:φ66mm x 25mm - Gear Ratio 6.54:1 - Total storage weight Approx. 1490g (with 7.4V / 4000 LiPo)

På lager 1