Kyosho Fazer FZ02 og D2

Kyosho 34416T1B FAZER MK2 (L) Chevrolet Chevelle SL ...

Art.nr: 34416T1B

Copied

Now driving R/C is even more fun Newly designed FZ02 chassis with realistic racing car body For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. ●New design shaft drive full-time 4WD touring chassis（FZ02）. ●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. ●Equipped with 2-bevel grease-filled gear diffs on front and rear. ●Large size dog bones and cup joints realize superior reliability and durability. ●Belt mounting battery compartment allows various battery types to be used. ●Full ball bearings that reduce drive loss equipped throughout the drive system. ●Features KS202W waterproof steering servo. ●Includes completely finished body with color scheme and decals applied. ●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. ●Performance can be further enhanced by installing various optional parts. Technical datas ■Length 484mm ■Width 195mm ■Wheelbase 274mm ■Tread (F/R) F：167mm／R：167mm ■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm ■Gear Ratio 6.5：1 ■Weight 1650g (approx.) ■R/C system Syncro KT-231P+ ■Motor G14L Kit Contents ●Completed chassis with R/C radio installed ●Factory assembled body complete with color scheme ●Syncro KT-231P+ transmitter ●Installed 60A waterproof electronic speed controller (forward/brake/reverse) ●Hexagonal wrench ●Spanner Required for Operation ●4 x AA batteries for transmitter ●Battery for chassis (recommended: 7.2V Ni-MH battery) ●Charger for battery for chassis ●Tools

2.995,-

4.295,-

På lager 1

KJØP

-30%

Kyosho Fazer MK2 (L) Pontiac GTO 1967 Tyrol Blue 1:10 ...

Art.nr: 34431T2B

Copied

KYOSHO FAZER MK2 (L) PONTIAC GTO 1967 TYROL BLUE 1:10 READYSET Now driving R/C is even more fun Newly designed FZ02L chassis with realistic racing car body For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition to the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. Chassis features a reduced number and variety of screws by making frequently used screws the same size. Most screws are flat head screws that can be removed with a 2mm hex wrench for easy disassembly.“Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism. New design shaft drive full-time 4WD touring chassis (FZ02L) Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. Equipped with 2-bevel grease-filled gear diffs on front and rear. Large size dog bones and cup joints realize superior reliability and durability. Belt mounting battery compartment allows various battery types to be used. Full ball bearings that reduce drive loss equipped throughout the drive system. Features KS202W steering servo. Includes completely finished body with color scheme and decals applied. Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. Performance can be further enhanced by installing various optional parts. Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths. Handling factors such as bump steer and scrub radius are optimized on the front suspension. Simple ball-connected steering knuckles provide reliable steering and suspension movement. Interchangeable front-rear and left-right hub carriers optimize spare parts utilization and improve maintenance efficiency. Front and rear light buckets compatible with the separately sold 97054 LED light unit series. By installing the LED light unit, it transforms into a body full of real car feeling. New design Vintage Touring Car (VTC) tires & Rostyle type wheels to match vintage car style. Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T-37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary. Kit Contents Completed chassis with R/C radio installed Factory assembled body complete with color scheme Syncro KT-231P+ transmitter Installed 60A waterproof ESC (forward/brake/reverse) Hex wrench Spanner Required For Operation 4 x AA batteries for transmitter Battery and charger for chassis Tools Chassis Technical Data Length 500mm Width 195mm (Body 210mm) Wheelbase 274mm Tread (F/R) F:167mm / R:167mm Tires (F/R) F:64 X 27.7mm / R:64 X 27.7mm Gear Ratio 6.54:1 Weight 1650g (approx.) R/C system Syncro KT-231P+ Motor 550 G14L

3.295,-

4.595,-

På lager 1

KJØP

-28%

Kyosho 34419T2B KYOSHO FAZER MK2 (L) CHEVY EL CAMINO ...

Art.nr: 34419T2B

Copied

Kyosho 34419T2B KYOSHO FAZER MK2 (L) CHEVY EL CAMINO SS396 1969 1:10 READYSET Now driving R/C is even more fun Newly designed FZ02 chassis with realistic racing car body For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. ●New design shaft drive full-time 4WD touring chassis（FZ02）. ●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. ●Equipped with 2-bevel grease-filled gear diffs on front and rear. ●Large size dog bones and cup joints realize superior reliability and durability. ●Belt mounting battery compartment allows various battery types to be used. ●Full ball bearings that reduce drive loss equipped throughout the drive system. ●Features KS202W waterproof steering servo. ●Includes completely finished body with color scheme and decals applied. ●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. ●Performance can be further enhanced by installing various optional parts. ●New design shaft drive full-time 4WD touring chassis（FZ02L）. ●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. ●Equipped with 2-bevel grease-filled gear diffs on front and rear. ●Large size dog bones and cup joints realize superior reliability and durability. ●Belt mounting battery compartment allows various battery types to be used. ●Full ball bearings that reduce drive loss equipped throughout the drive system. ●Features KS202W waterproof steering servo. ●Includes completely finished body with color scheme and decals applied. ●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. ●Performance can be further enhanced by installing various optional parts. Technical datas ■Length 461mm ■Width 195mm ■Wheelbase 274mm ■Tread (F/R) F：167mm／R：167mm ■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm ■Gear Ratio 6.5：1 ■Weight 1650g (approx.) ■R/C system Syncro KT-231P+ ■Motor G14L Kit Contents ●Completed chassis with R/C radio installed ●Factory assembled body complete with color scheme ●Syncro KT-231P+ transmitter ●Installed 60A waterproof electronic speed controller (forward/brake/reverse) ●Hexagonal wrench ●Spanner Required for Operation ●4 x AA batteries for transmitter ●Battery for chassis (recommended: 7.2V Ni-MH battery) ●Charger for battery for chassis ●Tools

3.395,-

3.995,-

På lager 1

KJØP

-15%

Kyosho 34418T1B FAZER MK2 Chevy Camaro Z28 1969 1:10 ...

Art.nr: 34418T1B

Copied

For the pure enjoyment of R / C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can't be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, + 5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles , in addition to the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. ●“Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism. ●New design shaft drive full-time 4WD touring chassis（FZ02）. ●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. ●Equipped with 2-bevel grease-filled gear diffs on front and rear. ●Large size dog bones and cup joints realize superior reliability and durability. ●Belt mounting battery compartment allows various battery types to be used. ●Full ball bearings that reduce drive loss equipped throughout the drive system. ●Features KS202W waterproof steering servo. ●Includes completely finished body with color scheme and decals applied. ●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. ●Performance can be further enhanced by installing various optional parts. Completely new chassis realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck. Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly. Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency. Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths. New design oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control. Equipped with long shock end allows a high ride height to pursue true scale appearance. Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary. As the signature American sports coupe, the Chevrolet Camaro has maintained its popularity around the world. Sold during 1967 to 1969, the Z/28 was the highest specification in the first Camaro model. In addition to its long nose and short deck proportions, the classic coke-bottle front and rear fender lines are beautifully reproduced in 1/10 scale. New design Vintage Touring Car (VTC) tires & Rostyle type wheels to match vintage car style. Comes with the new powerful 550 size 14T brushed motor(G14L). The long can with Steel ring around the motor case and internal cooling fan provides efficient torque and high speeds. TECHNICAL DATA ■Length 507mm ■Width 195mm(Body width:210mm) ■Wheelbase 260mm ■Tread (F/R) F：167mm／R：167mm ■Tires (F/R) F：φ64×27.7mm／R：φ64×27.7mm ■Gear Ratio 6.54：1 ■Weight 1650g (approx.) ■R/C system Syncro KT-231P+ ■Motor G14L

3.995,-

4.295,-

På lager 2

KJØP

-7%

Kyosho Fazer MK2 (L) Chevy Bel Air Coupe 1957 ...

Art.nr: 34433T1B

Copied

Kyosho Fazer MK2 (L) Chevy Bel Air Coupe 1957 Turquoise 1:10 Readyset Now driving R/C is even more fun Newly designed FZ02L chassis with realistic racing car body For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. ●“Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism. ●New design shaft drive full-time 4WD touring chassis（FZ02）. ●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. ●Equipped with 2-bevel grease-filled gear diffs on front and rear. ●Large size dog bones and cup joints realize superior reliability and durability. ●Belt mounting battery compartment allows various battery types to be used. ●Full ball bearings that reduce drive loss equipped throughout the drive system. ●Features KS202W waterproof steering servo. ●Includes completely finished body with color scheme and decals applied. ●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. ●Performance can be further enhanced by installing various optional parts. Chevrolet’s ‘Bel Air’ 2-door sports coupe was named after the luxury residential area of Los Angeles. With imposing body form with large tail fins, models sold from 1953 to 1957 are most popular among the first generation Bel Air series. Vintage Touring Car (VTC) tires & Rostyle type wheels to match vintage car style. Front and rear light buckets compatible with the separately sold 97054 LED light unit series. By installing the LED light unit, it transforms into a body full of real car feeling. Completely new chassis realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck. Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly. Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency. Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths. Oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control. Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary.

3.795,-

4.395,-

På lager 2

KJØP

-14%

Kyosho Fazer MK2 (L) Mercedes Benz 300 SEL 1971 1:10 ...

Art.nr: 34436T1B

Copied

Kyosho Fazer MK2 (L) Mercedes Benz 300 SEL 1971 1:10 Readyset - Type1 The 300 SEL 6.3, a symbol of Mercedes-Benz's classic cars, has been recreated as an electric R/C car! Enjoy driving in style with the 1971 Mercedes-Benz 300 SEL 6.3 For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. ●The "1971 Mercedes-Benz 300 SEL 6.3" was produced by Mercedes-Benz from 1968 to 1971. It served as their flagship model during that time, featuring a 6.3-liter V8 engine, and earned the nickname "Dragster" due to its exceptional acceleration. This "Super Sedan" showcased remarkable power and performance. ●The body of this model is built in an ultra-scale body specification, with the large front grille accurately replicating the Mercedes-Benz emblem, the "Three-Pointed Star," using separate parts. All components are chrome-plated, and the unique vertical twin-lamp headlights and rear combination lights feature lens-cut transparent injection parts that allow for LED installation. The body color chosen is a luxurious Beige Gray, and the model comes with color decal application already completed at the factory, providing a finished body with a high-class appearance. ●Front and rear light buckets compatible with the separately sold 97054 LED light unit series. By installing the LED light unit, it transforms into a body full of real car feeling. ●Installing vintage TC tires and rally wheels with wheel caps, which perfectly match the vintage car. ●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. ●Full-time 4WD touring chassis with shaft drive that allows anyone to enjoy driving.（FZ02L）。 ●Full ball bearings that reduce drive loss equipped throughout the drive system. ●Features KS202W waterproof steering servo. ●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. ●Uses button screws with hexagonal holes in each part. Reliable tightening torque can be applied, and maintenance is possible with even fewer tools. ●Since the motor mount has mounting holes according to the pinion gear, troublesome backlash adjustment is unnecessary. Supports from 29T to 37T. ●Performance can be further enhanced by installing various optional parts. Special website here > This radical model combines a luxury 4-door saloon with supercar acceleration and performance from a 6.3-liter V8 engine outputting 250 horsepower. The signature headlights and grille are emblematic of this era in Mercedes design. Vintage Touring Car (VTC) tires & Rostyle type wheels to match vintage car style. Front and rear light buckets compatible with the separately sold 97054 LED light unit series. By installing the LED light unit, it transforms into a body full of real car feeling. Completely new chassis realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck. Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly. Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency. Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths. Oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control. Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary.

3.695,-

4.295,-

** Ikke på lager

KJØP

-14%

Kyosho 34434T1B Fazer MK2 (L) Buick Riviera 1965 Regal ...

Art.nr: 34434T1B

Copied

Now driving R/C is even more fun Newly designed FZ02L chassis with realistic vintage car body For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. ●“Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism. ●New design shaft drive full-time 4WD touring chassis（FZ02）. ●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. ●Equipped with 2-bevel grease-filled gear diffs on front and rear. ●Large size dog bones and cup joints realize superior reliability and durability. ●Belt mounting battery compartment allows various battery types to be used. ●Full ball bearings that reduce drive loss equipped throughout the drive system. ●Features KS202W waterproof steering servo. ●Includes completely finished body with color scheme and decals applied. ●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. ●Performance can be further enhanced by installing various optional parts. 1965 Buick Riviera Amongst the famous models produced by America’s prestigious Buick marque, the Riviera released in 1963 received high praise for its distinguished body design. The more elegant 1965 model featured repositioned headlights and tail lights. Vintage Touring Car (VTC) tires & Rostyle type wheels to match vintage car style. Front and rear light buckets compatible with the separately sold 97054 LED light unit series. By installing the LED light unit, it transforms into a body full of real car feeling. Completely new chassis realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck. Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly. Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency. Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths. Oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control. Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary. Technical Data ■Length 500mm ■Width 211mm(Body width * excluding mirror) ■Height 130mm ■Wheelbase 274mm ■Tread (F/R) 167mm ■Tires (F/R) φ64×27.7mm ■Gear Ratio 6.54：1 ■Weight 1650g (approx.) ■R/C system Syncro KT-231P+ ■Motor G14L Kit Content ●Completed chassis with R/C radio installed ●Factory assembled body complete with color scheme ●Syncro KT-231P+ transmitter ●Hexagonal wrench ●Spanner ●Setting change parts Requirement to Run ●4 x AA batteries for transmitter ●Battery for chassis (recommended: 7.2V Ni-MH battery) ●Charger for battery for chassis ●Tools

3.795,-

4.395,-

** Ikke på lager

KJØP

-14%

Kyosho 34428T1B Fazer MK2 Mazda Savanna RX-3 1972 ...

Art.nr: 34428T1B

Copied

Kyosho 34428T1B Fazer MK2 Mazda Savanna RX-3 1972 Tuned Ver. 1:10 Readyset T1 Now driving R/C is even more fun FZ02 chassis with realistic racing car body For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 274mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter. ●“Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism. ●A tuned version based on the 1971 Mazda Savanna GT, equipped with front and rear overfenders and a rear spoiler. ●The separately sold LED light unit (97054) can be attached to the front and rear light buckets, making it even more scaled. ●Vintage Touring Car (VTC) tires and the custom 8-Spoke Watanabe Wheels for the Hakosuka GT-R are the perfect match for this vintage car. ●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. ●Full ball bearings that reduce drive loss equipped throughout the drive system. ●Features KS202W waterproof steering servo. ●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. ●Shaft drive full-time 4WD touring chassis（FZ02）. ●Equipped with a plated dummy brake disc and a painted brake caliper to improve the sense of scale. ●Uses button screws with hexagonal holes in each part. Reliable tightening torque can be applied, and maintenance is possible with even fewer tools. ●Since the motor mount has mounting holes according to the pinion gear, troublesome backlash adjustment is unnecessary. Supports from 29T to 37T. ●Performance can be further enhanced by installing various optional parts. Equipped with a 2-rotor rotary engine producing 120 horsepower, the MAZDA Savanna GT was one of the fastest Japanese made cars of the 1970’s. Beautiful flowing lines with sharp over fender and air spoiler combined to create its unique and formidable style. Vintage Touring Car (VTC) tires and the custom 8-Spoke Watanabe Wheels for the Hakosuka GT-R are the perfect match for this vintage car.The headlights and rear combination lamps use transparent injection parts with lens cuts, and can accommodate the installation of the separately sold 97054 LED light unit series in the light buckets. By attaching clear 4-lamp units to the front and red 4-lamp units to the rear, the body transforms into one that exudes a realistic vehicle feel. (Recommended LED light unit: 97054-4CR×2) Completely realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck. Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly. Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths. Equipped with an oil shocks as standard equipment. Change the vehicle height by changing the length of the damper end according to the vehicle type. Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary. Specifications: ■Length 459mm ■Width 200mm(Body width * Excluding mirrors) ■Height 136mm ■Chassis Height 7mm(approx.) ■Wheelbase 260mm ■Tread (F/R) 167mm ■Tires (F/R) φ64×27.7mm ■Gear Ratio 6.54：1 ■Weight 1650g (approx.) ■R/C system &; Syncro KT-231P+ ■Motor G14L Kit Contents: ●Completed chassis with R/C radio installed ●Factory assembled body complete with color scheme ●Syncro KT-231P+ transmitter ●Hexagonal wrench ●Spanner ●Setting change parts Required for Operation: ●4 x AA batteries for transmitter ●Battery for chassis (recommended: 7.2V Ni-MH battery) ●Charger for battery for chassis ●Tools

3.895,-

4.295,-

På lager 1

KJØP

-9%

Kyosho 34461C FAZER MK2 Chassis Kit

Art.nr: 34461C

Copied

34461 Fazer Mk2 FZ02 Chassis KIT NB! Ingen radio,body eller motor esc. Electric 1:10 On-Road TC Roller Discover the ultimate fusion of performance and customization with the Kyosho EP Fazer Mk2 1/10 Electric Touring Car Rolling Chassis Kit—an advanced, partially assembled racing platform designed to deliver unmatched handling, durability, and flexibility for R/C enthusiasts of all levels. About the EP Fazer Mk2 Roller Kit Chassis The Kyosho EP Fazer Mk2 1/10 Electric Touring Car Rolling Chassis Kit is crafted for enthusiasts who appreciate both high performance and customizability. This kit is 40% pre-assembled, with key components like shocks and differential gears left unfilled with oil, allowing racers to fine-tune their settings according to personal preferences. The design prioritizes a low center of gravity, which significantly enhances handling and stability, which is especially important during high-speed maneuvers. The chassis is built from high-impact nylon material, which not only reduces weight but also improves the durability and impact resistance of the vehicle. The deckless layout simplifies maintenance by reducing the number of components and consolidating screw sizes, making disassembly and adjustments more efficient. Drivetrain & Suspension The drivetrain and suspension of the Kyosho EP Fazer Mk2 are meticulously designed to deliver superior performance. The FZ02 chassis features a high-strength, torsionally rigid structure with front and rear stiffeners and rib reinforcements at critical points, ensuring robust performance under various racing conditions. The inclusion of oil shocks and adjustable springs allows for precise tuning of the front-rear geometric balance, resulting in light, responsive handling. The front suspension is optimized to reduce bump steer and scrub radius, enhancing control and consistency during tight turns. Additionally, the ball-connected steering knuckle design ensures reliable steering performance, while interchangeable front-rear and left-right hub carriers improve parts efficiency and ease of maintenance. Optional Performance Hop-ups The Kyosho EP Fazer Mk2 comes equipped with several high-performance optional parts, elevating its capabilities and appeal. The Duralumin HD TC center shaft S (FAW209) replaces the standard resin shaft, providing increased rigidity and smoother power transmission. This upgrade not only enhances driving performance but also adds a striking visual element with its red anodized finish. The TC Universal swing shafts (FAW202) on the front drive section offer consistent drive transmission even at wide steering angles and prevent dropouts during heavy contact, ensuring reliable performance in competitive racing scenarios. Additional features such as the special resin transponder mounting stay, body mounts for various body types, and aluminum motor dust plate for effective heat dissipation further underscores the kit’s versatility and race-readiness. These enhancements make the Kyosho EP Fazer Mk2 an exceptional choice for both seasoned racers and casual R/C enthusiasts looking to build a high-performance, customizable touring car. Features: Factory partially assembled roller chassis Low center of gravity design with high strength and rigidity Aluminum HD center driveshaft TC universal swing shafts Special resin transponder stay mount Optional body mounts for compatibility with various body types Super lightweight and durable aluminum motor plate Aluminum Oil-filled shocks Aluminum TC universal driveshafts <Technical Data> - Length 375mm - Width200mm/190mm - Ground clearance 8mm (approx.) - Wheelbase 260mm - Tread（Body width:190mm）F:164mm/R:164mm - Tread（Body width:200mm）F:174mm/R:174mm - Tires F: φ66mm x 25mm/R:φ66mm x 25mm - Gear Ratio 6.54:1 - Total storage weight Approx. 1490g (with 7.4V / 4000 LiPo)

2.395,-

2.595,-

På lager 1

KJØP

-8%

Kyosho Fazer FZ02 og D2

Populært i denne kategorien

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Søkeresultater

Kyosho Fazer FZ02 og D2

Populært i denne kategorien

Totalt:

Tamiya El-biler

Kyosho-Biler

Kyosho Fazer FZ02 og D2

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler

WL-Toys

HAIBOXING Biler

Helion-biler