Hopp til innhold

Blackweek 2026

 
Art.nr: 34703T2B
Copied
Nyt kraftig pickup-ytelse i realistisk 1/10-skala!   Med robuste dekk og understell for å håndtere ulendt terreng og et stort lasteplan bak, er pickuper etterspurt i hele Nord-Amerika, Sørøst-Asia, Afrika og Australia, og mange populære pickuper har blitt gjenskapt som R/C-modeller. Toyota utviklet Tacoma hovedsakelig for det nordamerikanske markedet, og den har fortsatt å selge godt siden utgivelsen i 1995. Denne modellen er basert på 3. generasjon Tacoma som først fikk stor anerkjennelse i 2016 på grunn av sin aggressive stil og praktiske egenskaper. Toppen av serien Tacoma TRD Pro har blitt gjenskapt av Kyosho med et tøft 1/10-skala chassis i en Readyset-pakke. Kyoshos støpehåndverk gjengir TRD Pro-kroppen plettfritt i lett, men stiv polykarbonatharpiks med styrke for hard terrengkjøring. Basert på offroad KB10-chassiset passer den lange akselavstanden og den korte slitebanen til KB10L-chassiset perfekt til karosseriet. Det akseldrevne 4WD-systemet overfører pålitelig kraften til den børsteløse TORX10L-motoren for å nå topphastigheter på rundt 75 km/t under ledelse av ESC (Electronic Speed Control) og et kompatibelt 3S (11.1V) lipo-batteri. Denne praktiske Readyset-pakken inneholder moroa fra en ultraskala pickup på et dynamisk terrengchassis med en finish som i kvalitet ligner på premium-modeller som kun er skjermet. ●Readyset inkluderer R/C-system forhåndsinstallert på chassiset og en pistolgrepssender. ●Forhåndsmalt og montert "Toyota Tacoma TRD Pro" ultraskala karosseri fanger fullt ut formen til den originale lastebilen. ● Nydesignede kroppsfester skjuler kroppsstifter fra utsiden for å realisere en høyere skalafølelse. ●LED-lys (selges separat) kan festes til lysbøttene foran og bak. Skalafølelsen forsterkes ytterligere når 4 lys foran og 2 baklys (4 hvis ryggelys er installert) lyser fullt ut. Anbefalt: 4 lys foran, 2 baklykter (97054-4CR x 1, 97054-2B x 1) / Med reverslys, 4 lys foran, 4 baklykter (97054-4B x 1, 97054-4CR x 1) ●Fulltids 4WD KB10L-chassis kan håndtere røffe veier så vel som på vei og flatt skitt. ●Batteriholder kompatibel med 3S-batterier. Batteriet er festet med et belte som er lett å ta av og på. ●Inkluderer kraftig TORX 10L børsteløs motor og vanntett BRAINZ 10 + børsteløs ESC. ●3 differensialdesign for forbedret løpsstabilitet. Olje #10000 er forhåndsfylt i senterdiff og #5000 olje foran og bak. ●Fulle kulelager (22) utstyrt for optimal driveffektivitet og holdbarhet. ●Hvert gir, mottaker er innelukket i en forseglet boks for å forhindre kompromisser fra sand og skitt under kjøring. ●Pistolgrep type Syncro KT-231P+ sender inkludert muliggjør ulike innstillingsendringer. ●Batterilader og batteri for chassis pluss 4 x AA-batterier for sender må kjøpes separat. Den lave og brede formen på polykarbonatkroppen er ulastelig gjenskapt med den unike TRD Pro frontgrillen og lette bøtter for å forbedre den tredimensjonale effekten. Slitesterk 1,5 mm PC-kropp. Karosserifester foran og bak sikrer karosseriet fra under chassiset (bildet viser fronten) slik at skalaens utseende ikke kompromitteres av synlige karosseristolper eller pinner på utsiden av karosseriet. Basert på 1/10-skalaen Mad Wagon bush-basher offroad-chassis, har KB10L en utvidet akselavstand og forkortede fjæringsarmer med stabiliteten til akseltypen 4WD. 4WD-system av akseltype med girkasse med senterdifferensial reduserer motorrotasjonen for optimal kraftoverføring til for- og bakhjul. Nytt langt aluminiumchassis gir pålitelig trekkraft selv på overflater med lite grep. Oljedempere demper tilbakemeldinger fra veibanen pålitelig for å stabilisere chassiset under kjøring. Forhåndsmonterte støtdempere er forhåndsfylte med olje og fjærhastighet (hardhet) er optimert for KB10L-chassiset. Sperrestenger på fjæring og styring gjør det enkelt å justere camber- og tåvinkelen. Teleskopiske universalaksler i harpiks er utskiftbare mellom foran og bak for deler og vedlikeholdseffektivitet. Nylig vedtatt senterdifferensial i KB10L-chassiset optimerer kraftfordelingen til for- og bakhjul gjennom hjørner for jevn svingytelse. IF245 cylindrisk stålhjul for 1/8-skala buggy Inferno NEO-serien kan installeres som en valgfri del.(Et BRG005-lager kreves separat.) Utstyrt med sintrede metall 4-fasede differensialgir foran og bak med kapasitet til å håndtere høyeffekts børsteløse motorer. IS117 hardt vinkelgir fra 1/8-modellen Inferno NEO ST 3.0 kan installeres som en valgfri del.(BRG005-lager kreves separat.) Nydesignede hjul og dekk viser overlegent grep, både på og terreng. Dekkmønster og hjuldesign gjenskaper den faktiske kjøretøystilen for en full følelse av skalarealisme.   TEKNISKE DATA ■Lengde 572mm ■Bredde 274mm ■Høyde 214mm ■Akkullavstand 340mm ■Slitebane F/R 224mm ■Dekk(F & R) φ110 x 47 mm ■Girforhold 10.41:1 ■Vekt 3410 g (ca.) ■Motor TORX10L Børsteløs Motor kv2850   ●Fabrikkmontert chassis ●Forkuttet og malt kropp komplett med dekaler påført ●2,4GHz Syncro KT-231P+ sender ●1,5 mm/2,0 mm/2,5 mm L-formede sekskantnøkler ●Kvernøkkel ●4/5/5,5/7/10mm Integrert skiftenøkkel   Nødvendig for drift ● AA-batterier x 4 for sender ●Batteri for kjøring (2-3S LiPo batteri *Installerbart batteri størrelse 143x47x30mm) ●Lader for LiPo-batteri   English text:   Enjoy powerful pickup truck performance in realistic 1/10 scale!   With rugged tires and undercarriage to handle rough terrain and a large rear cargo bed, pickup trucks are in high demand throughout North America, Southeast Asia, Africa, and Australia and many popular pickup trucks have been recreated as R/C models. Toyota developed the Tacoma mainly for the North American market and it has continued to sell well since its release in 1995. This model is based on the 3rd generation Tacoma which first appeared to much acclaim in 2016 due to its aggressive styling and practicality. The top of the range Tacoma TRD Pro has been recreated by Kyosho with a tough 1/10 scale chassis in a Readyset package. Kyosho’s molding craftmanship immaculately reproduces the TRD Pro body in lightweight but rigid polycarbonate resin with the strength for hard off-road driving. Based on the off-road KB10 chassis, the long wheelbase and short tread of the KB10L chassis matches the body perfectly. The shaft-driven 4WD system reliably transfers the brute power of the TORX10L brushless motor to reach top speeds of about 75km/h under the management of the ESC (Electronic Speed Control) and a compatible 3S (11.1V) lipo battery. This convenient Readyset package contains the fun of an ultra-scale pickup truck on a dynamic off-road chassis with a finish similar in quality to premium display-only models. ●Readyset includes R/C system pre-installed on the chassis and a pistol-grip transmitter. ●Pre-painted and assembled "Toyota Tacoma TRD Pro" ultra-scale body fully captures the form of the original truck. ●Newly designed body mounts conceal body pins from the outside to realize a higher sense of scale. ●LED lights (sold separately) can be attached to the front and rear light buckets. The scale feeling is further enhanced when 4 front lights and 2 rear lights (4 if reverse lights installed) are fully lit. Recommended: Front 4 lights, Rear 2 lights (97054-4CR x 1, 97054-2B x 1) / With reverse lights, Front 4 lights, Rear 4 lights (97054-4B x 1, 97054-4CR x 1) ●Full-time 4WD KB10L chassis can handle rough roads as well as on-road and flat dirt. ●Battery holder compatible with 3S size batteries. The battery is fixed with a belt that is easy to take off and on. ●Includes powerful TORX 10L brushless motor and waterproof BRAINZ 10 + brushless ESC. ●3 differential design for enhanced running stability. #10000 oil is pre-filled in the center diff and #5000 oil in the front and rear diffs. ●Full ball bearings (22) equipped for optimal drive efficiency and durability. ●Each gear unit, receiver are enclosed in a sealed box to prevent compromise from sand and dirt while driving. ●Pistol grip type Syncro KT-231P+ transmitter included allows various setting changes. ●Battery charger and battery for chassis plus 4 x AA batteries for transmitter must be purchased separately. Low & wide shape of the polycarbonate body has been immaculately recreated with the unique TRD Pro front grill and light buckets to enhance the 3-dimensional effect. Durable 1.5mm PC body. Body mounts on front and rear secure the body from under the chassis (photo shows front) so scale appearance is not compromised by exposed body post or pins on the outside of the body. Based on the 1/10 scale Mad Wagon bush-basher off-road chassis, the KB10L has an extended wheelbase and shortened suspension arms with the stability of the shaft-type 4WD. Shaft-type 4WD system incorporating gearbox with center differential reduces motor rotation for optimal power transfer to front and rear wheels. New long aluminum chassis produces reliable traction even on low-grip surfaces. Oil shocks reliably attenuate feedback from the road surface to stabilize the chassis while driving. Pre-mounted shocks are pre-filled with oil and spring rate (hardness) has been optimized for the KB10L chassis. Turnbuckle rods on suspension and steering make it easy to adjust the camber and toe angle. Telescoping resin universal shafts are interchangeable between front and rear for parts and maintenance efficiency. Newly adopted center differential in the KB10L chassis optimizes power distribution to front and rear wheels through corners for smooth turning performance. IF245 steel spur gear for the 1/8 scale buggy Inferno NEO series can be installed as an optional part.(One BRG005 bearing is required separately.) Equipped with sintered metal 4-bevel differential gears on the front and rear with the capacity to handle high-power brushless motors. IS117 hard bevel gear from the 1/8 model Inferno NEO ST 3.0 can be installed as an optional part.(BRG005 bearing is required separately.) Newly designed wheels and tires demonstrate superior grip, both on and off-road. Tire pattern and wheel design replicate the actual vehicle style for a full sense of scale realism.   ■Length 572mm ■Width 274mm ■Height 214mm ■Wheelbase 340mm ■Tread F/R 224mm ■Tires(F & R) φ110 x 47mm ■Gear Ratio 10.41:1 ■Weight 3,410g (approx.) ■Motor TORX10L Brushless Motor kv2850  

5.995,-

8.495,-

På lager 1
KJØP
-29%
Art.nr: 34703T1
Copied
Nyt kraftig pickup-ytelse I realistisk skala 1/10! Med robuste dekk og understell for å håndtere ulendt terreng og et stort lasteplan bak, er pickuper etterspurt i hele Nord-Amerika, Sørøst-Asia, Afrika og Australia, og mange populære pickuper har blitt gjenskapt som R/C-modeller. Toyota utviklet Tacoma hovedsakelig for det nordamerikanske markedet og den har fortsatt å selge siden utgivelsen i 1995. Disse modellene er basert på 3. generasjon Tacoma som først fikk stor anerkjennelse i 2016 på grunn av sin aggressive stil og praktiske egenskaper. Toppen av serien Tacoma TRD Pro har blitt gjenskapt av Kyosho med et tøft 1/10-skala chassis i en Readyset-pakke. Kyoshos støpehåndverk gjengir TRD Pro-kroppen plettfritt i lett, men stiv polykarbonatharpiks med styrke for hard terrengkjøring. Basert på offroad KB10-chassiset passer den lange akselavstanden og den korte slitebanen til KB10L-chassiset perfekt til karosseriet. Det akseldrevne 4WD-systemet overfører rundt. pålitelig kraft til den børsteløse TORX10L-motoren for å nå topphastigheter på 75 km/t under av ESC (Electronic Speed Control) og et kompatibelt 3S (11.1V) lipo-batteri Denne praktiske Readyset-pakken inneholder moroa fra en ultraskala pickup på et dynamisk terrengchassis med en finish som i kvalitet ligner på premium-modeller som kun er skjermet. ●Readyset inkluderer R/C-system forhåndsinstallert på chassiset og en pistolgrepsender. ●Forhåndsmalt og montert "Toyota Tacoma TRD Pro" ultraskala karosseri fanger fullt ut formen til den originale lastebilen. ● Nydesignede kroppsfester skjuler kroppsstifter fra utsiden for å realisere en høyere skalafølelse. ●LED-lys (selges separat) kan festes til lysbøttene foran og bak. Skalafølelsen forsterkes ytterligere når 4 frontlykter og 2 baklykter (4 hvis tåkebaklys er installert) lyser fullt ut. Anbefalt: 4 lys foran, 2 baklykter (97054-4CR x 1, 97054-2B x 1) / Med tåkelys bak, 4 lys foran, 4 baklykter (97054-4B x 1, 97054-4CR x 1) ●Fulltids 4WD KB10L-chassis kan håndtere røffe veier så vel som på vei og flat skitt. ●Batteriholder kompatibel med 3S-batterier. Batteriet er festet med et belte som er lett å ta av og på. ●Inkluderer kraftig TORX 10L børsteløs motor og vanntett BRAINZ 10 + børsteløs ESC. ●3 differensialdesign for forbedret løpsstabilitet. Olje #10000 er forhåndsfylt i senterdiff og #5000 olje foran og bak. ●Full kulelager (22) utstyrt for optimal driveffektivitet og holdbarhet. ●Hver girenhet, mottaker er innelukket i en forseglet boks for å forhindre kompromisser fra sand og skitt under kjøring. ●Pistolgrep type Syncro KT-231P+ avsender inkludert muliggjør ulike innstillingsendringer. ●Batterilader og batteri for chassis pluss 4 x AA-batterier for sender må kjøpes separat. Lav og avlet form på polykarbonatkroppen er ulastelig gjenskapt med den unike TRD Pro frontgrillen og lett bøtter for å forbedre den 3-dimensjonale effekten. Holdbart 1,5 mm PC-hus. Karosserifester foran og bak fester karosseriet fra under chassiset (bildet viser fronten) slik at skalaens utseende ikke kompromitteres av synlige karosseristifter på utsiden av karosseriet. Basert på 1/10-skalaen Mad Wagon bush-basher offroad-chassis, har KB10L og utvidet akselavstand og forkortede fjæringsarmer med stabilitet til akseltypen 4WD. 4WD-system av akseltype med girkasse med senterdifferensial reduserer motorrotasjonen for optimal kraftoverføring til for- og bakhjul. Nydesignet langt aluminiumchassis gir pålitelig trekkraft selv på overflaten med lite grep. Oljedempere demper tilbakemeldinger fra veibanen for å stabilisere chassiset under kjøring. Forhåndsmonterte støtdempere er forhåndsfylte med olje og fjærhastighet (hardhet) er optimert for KB10L-chassiset. Sperrestenger på fjæring og styring gjør det enkelt å justere camber- og tåvinkelen. Forlengbare universalaksler i harpiks på de nedre opphengsarmene er utskiftbare mellom foran og bak for deler og vedlikeholdseffektivitet. Nylig vedtatt senterdifferensial i KB10L-chassiset optimerer kraftfordelingen til for- og bakhjuls hjørner for jevn svingytelse. IF245 cylindrisk stålhjul for 1/8-skala buggy Inferno NEO-serien kan installeres som en valgfri del.(Et BRG005-lager kreves separat.) Utstyrt med sintrede metall 4-fasede differensialgir foran og bak med kapasitet til å håndtere høyeffekter børsteløse motorer. IS117 hardt vinkelgir for 1/8-modellen Inferno NEO ST 3.0 kan installeres som en valgfri del.(BRG005-lager kreves separat.) Nydesignede hjul og dekk viser overlegent grep, både på og terreng. Dekkmønster og hjuldesign gjenskaper den faktiske kjøretøystilen for en full følelse av skala. Nødvendig for drift ● AA-batterier x 4 for sender ●Batteri for kjøring (2-3S LiPo batteri *Installerbart batteri størrelse 143x47x30mm) ●Lader for LiPo-batteri   English text:   Enjoy powerful pickup truck performance In realistic 1/10 scale! With rugged tires and undercarriage to handle rough terrain and a large rear cargo bed, pickup trucks are in high demand throughout North America, Southeast Asia, Africa, and Australia and many popular pickup trucks have been recreated as R/C models. Toyota developed the Tacoma mainly for the North American market and it has continued to sell well since its release in 1995. This model is based on the 3rd generation Tacoma which first appeared to much acclaim in 2016 due to its aggressive styling and practicality. The top of the range Tacoma TRD Pro has been recreated by Kyosho with a tough 1/10 scale chassis in a Readyset package. Kyosho’s molding craftmanship immaculately reproduces the TRD Pro body in lightweight but rigid polycarbonate resin with the strength for hard off-road driving. Based on the off-road KB10 chassis, the long wheelbase and short tread of the KB10L chassis matches the body perfectly. The shaft-driven 4WD system reliably transfers the brute power of the TORX10L brushless motor to reach top speeds of about 75km/h under the management of the ESC (Electronic Speed Control) and a compatible 3S (11.1V) lipo battery. This convenient Readyset package contains the fun of an ultra-scale pickup truck on a dynamic off-road chassis with a finish similar in quality to premium display-only models. ●Readyset includes R/C system pre-installed on the chassis and a pistol-grip transmitter. ●Pre-painted and assembled "Toyota Tacoma TRD Pro" ultra-scale body fully captures the form of the original truck. ●Newly designed body mounts conceal body pins from the outside to realize a higher sense of scale. ●LED lights (sold separately) can be attached to the front and rear light buckets. The scale feeling is further enhanced when 4 front lights and 2 rear lights (4 if rear fog lights installed) are fully lit. Recommended: Front 4 lights, Rear 2 lights (97054-4CR x 1, 97054-2B x 1) / With rear fog lights, Front 4 lights, Rear 4 lights (97054-4B x 1, 97054-4CR x 1) ●Full-time 4WD KB10L chassis can handle rough roads as well as on-road and flat dirt. ●Battery holder compatible with 3S size batteries. The battery is fixed with a belt that is easy to take off and on. ●Includes powerful TORX 10L brushless motor and waterproof BRAINZ 10 + brushless ESC. ●3 differential design for enhanced running stability. #10000 oil is pre-filled in the center diff and #5000 oil in the front and rear diffs. ●Full ball bearings (22) equipped for optimal drive efficiency and durability. ●Each gear unit, receiver are enclosed in a sealed box to prevent compromise from sand and dirt while driving. ●Pistol grip type Syncro KT-231P+ transmitter included allows various setting changes. ●Battery charger and battery for chassis plus 4 x AA batteries for transmitter must be purchased separately. Low & wide shape of the polycarbonate body has been immaculately recreated with the unique TRD Pro front grill and light buckets to enhance the 3-dimensional effect. Dunable 1.5mm PC body. Body mounts on front and rear secure the body from under the chassis (photo shows front) so scale appearance is not compromised by exposed body pins on the outside of the body. Based on the 1/10 scale Mad Wagon bush-basher off-road chassis, the KB10L has an extended wheelbase and shortened suspension arms with the stability of the shaft-type 4WD. Shaft-type 4WD system incorporating gearbox with center differential reduces motor rotation for optimal power transfer to front and rear wheels. Newly designed long aluminum chassis produces reliable traction even on low-grip surfaces. Oil shocks reliably attenuate feedback from the road surface to stabilize the chassis while driving. Pre-mounted shocks are pre-filled with oil and spring rate (hardness) has been optimized for the KB10L chassis. Turnbuckle rods on suspension and steering make it easy to adjust the camber and toe angle. Extendable resin universal shafts on the lower suspension arms are interchangeable between front and rear for parts and maintenance efficiency. Newly adopted center differential in the KB10L chassis optimizes power distribution to front and rear wheels through corners for smooth turning performance. IF245 steel spur gear for the 1/8 scale buggy Inferno NEO series can be installed as an optional part.(One BRG005 bearing is required separately.) Equipped with sintered metal 4-bevel differential gears on the front and rear with the capacity to handle high-power brushless motors. IS117 hard bevel gear for the 1/8 model Inferno NEO ST 3.0 can be installed as an optional part.(BRG005 bearing is required separately.) Newly designed wheels and tires demonstrate superior grip, both on and off-road. Tire pattern and wheel design replicate the actual vehicle style for a full sense of scale.

5.995,-

8.495,-

På lager 2
KJØP
-29%
Art.nr: 34363T2B
Copied
Realistic 2WD truck delivers the optimal combination of style and performance for the perfect introduction to R/C trucking. The OUTLAW RAMPAGE PRO readyset with a realistic roll cage adds more scale-oriented to the new concept full-scale 2WD truck and improving driving performance. The mechanism based on the actual truck gives a new driving feeling and brings more fun to drive R/C cars than ever. With a new chassis designed from the ground up, the underbody features double wishbone suspension on the front with a link system suspension on the rear in combination with the long stroke of high volume aerating oil shocks to deliver a standard of performance worthy of a 2WD trophy truck. Heavy-duty drive system realizes high durability and reliability and is designed to handle high loads with its 32-pitch module counter gear and diff gear and slipper clutch to manage sudden load changes from jump landings etc. With a power center combination consisting of the newly developed G15 brushed motor and large capacity Vortex WP Brush ESC 45A, the dynamic performance of the OUTLAW RAMPAGE is matched by its stunning 1970-80s trophy truck style with pre-cut and painted body with decals applied. Whether its the rough road or no road at all, the OUTLAW RAMPAGE puts the ultimate trucking experience in your hands. ● High strength and easy maintenance of the bathtub type chassis combines with a reinforced frame and dustproof monocoque radio box for high durability in hard driving. ● Equipped with underbody worthy of the 2WD trophy truck motif. Solid rear axle differential with link system delivers smooth suspension movement and traction for superior performance. ● Two mounting positions (on chassis) for rear suspension links allow setup to suit different driving conditions. ● Long suspension arms on the front double wishbone suspension deliver high traction and stability. Reflects real car mechanics, just as the rear does. ●Large capacity plastic aeration shocks maintain long suspension stroke in combination with the front and rear suspension systems. ● Omnipotent tires feature original tread pattern to deliver performance and style that matches the appearance of the scale body. Tires are fixed to the 3-piece wheel structure with screws so no gluing is required. ● Original truck body is designed in the image of a 1970s trophy truck. Chrome grill is available as optional parts (No. OLB051-01SM). ● Thicker and larger 32-pitch module counter gear and diff gear inside gearbox provide added strength. Spur gear is 48-pitch. ● Easy battery installation is possible with the lever lock battery holder. Radio plate with connector holder allows connection or disconnection with one hand.   Technical datas ● Length 561mm (with body) ● Width 262mm (with body) ● Height 231mm (with body) ● Wheelbase 335mm ● Tread (F/R) 204mm/204mm ● Tires (F/R interchangeable) φ108×38mm ● Gear Ratio 12.65 : 1 ● Motor 15 turn 540 type (G15 motor) ● Weight 2,400g approx.   Ready Set Contents ● Pre-assembled chassis installed with R/C unit ● Factory finished body with coloring and painted ● Syncro KT-231P+ transmitter ● TEAM ORION VORTEX WP Brush 45A ESC ● G15 brushed motor ● 7.2V-1800 Ni-MH battery ● AC Charger ● Hex wrench ● Cross wrench   Required for Operation 4 x AA-size batteries for transmitter

3.495,-

4.895,-

På lager 1
KJØP
-29%
Art.nr: 34363T1B
Copied
Realistic 2WD truck delivers the optimal combination of style and performance for the perfect introduction to R/C trucking. The OUTLAW RAMPAGE PRO readyset with a realistic roll cage adds more scale-oriented to the new concept full-scale 2WD truck and improving driving performance. The mechanism based on the actual truck gives a new driving feeling and brings more fun to drive R/C cars than ever. With a new chassis designed from the ground up, the underbody features double wishbone suspension on the front with a link system suspension on the rear in combination with the long stroke of high volume aerating oil shocks to deliver a standard of performance worthy of a 2WD trophy truck. Heavy-duty drive system realizes high durability and reliability and is designed to handle high loads with its 32-pitch module counter gear and diff gear and slipper clutch to manage sudden load changes from jump landings etc. With a power center combination consisting of the newly developed ‘G15’ brushed motor and large capacity Vortex WP Brush ESC 45A, the dynamic performance of the OUTLAW RAMPAGE is matched by its stunning 1970-80’s trophy truck style with pre-cut and painted body with decals applied. Whether it’s the rough road or no road at all, the OUTLAW RAMPAGE puts the ultimate trucking experience in your hands. ● High strength and easy maintenance of the bathtub type chassis combines with a reinforced frame and dustproof monocoque radio box for high durability in hard driving. ● Equipped with underbody worthy of the 2WD trophy truck motif. Solid rear axle differential with link system delivers smooth suspension movement and traction for superior performance. ● Two mounting positions (on chassis) for rear suspension links allow setup to suit different driving conditions. ● Long suspension arms on the front double wishbone suspension deliver high traction and stability. Reflects real car mechanics, just as the rear does. ●Large capacity plastic aeration shocks maintain long suspension stroke in combination with the front and rear suspension systems. ● Omnipotent tires feature original tread pattern to deliver performance and style that matches the appearance of the scale body. Tires are fixed to the 3-piece wheel structure with screws so no gluing is required. ● Original truck body is designed in the image of a 1970’s trophy truck. Chrome grill is available as optional parts (No. OLB051-01SM). ● Thicker and larger 32-pitch module counter gear and diff gear inside gearbox provide added strength. Spur gear is 48-pitch. ● Easy battery installation is possible with the lever lock battery holder. Radio plate with connector holder allows connection or disconnection with one hand.   Technical datas ● Length 561mm (with body) ● Width 262mm (with body) ● Height 231mm (with body) ● Wheelbase 335mm ● Tread (F/R) 204mm/204mm ● Tires (F/R interchangeable) φ108×38mm ● Gear Ratio 12.65 : 1 ● Motor 15 turn 540 type (G15 motor) ● Weight 2,400g approx.   Ready Set Contents ● Pre-assembled chassis installed with R/C unit ● Factory finished body with coloring and painted ● Syncro KT-231P+ transmitter ● TEAM ORION VORTEX WP Brush 45A ESC ● G15 brushed motor ● 7.2V-1800 Ni-MH battery ● AC Charger ● Hex wrench ● Cross wrench   Required for Operation 4 x AA-size batteries for transmitter

3.495,-

4.895,-

På lager 1
KJØP
-29%
Art.nr: 34412T2-BC
Copied
COMBO Kyosho MadVan T2 Readyset - Batt 2200 / Chargeur 1A Unique visuals of this American full-size van deliver excellent backroad driving performance Designed in the image of an American full-size van, Kyosho’s fun MAD VAN model combines retro body styling with a light and sporty chassis for pure R/C enjoyment. The simple design of the FZ02L-BT chassis uses fewer parts for easy maintenance and delivers strength and rigidity through front & rear stiffeners with reinforced ribbing and optimized material formulation on critical parts. In addition, the near symmetrical design and optimal front-rear suspension balance works in combination with the power source to produce excellent control and maneuverability for this type of model. Slipper clutch, front and rear differentials, oil shocks and full ball bearing specifications provide performance efficiency to compliment its high durability and impact-resistance. Soft compound, wide large-diameter tires with inner sponges feature rounded shoulders to produce secure grip, not only off-road, but on sealed surfaces too, so this van can be enjoyed just about anywhere! As the MAD VAN is a fully pre-assembled Readyset, only 4 x AA batteries for the transmitter, battery for the chassis, and a battery charger are required for the fun to begin. Whether going off-road or on-road, the MAD VAN produces dynamic performance to be enjoyed with its own unique style.   *The body is designed in the image of the American full size of the 1970s and 1980s, and the body color is metallic purple, which is still popular in the United States. *Includes decals that allow you to change the front grille / coloring and a separate roof spoiler made of polycarbonate that enhances driving performance, allowing customers to customize it to their liking. *The main chassis uses a lightweight, highly rigid glass-reinforced 66 nylon resin bathtub model.. *66 nylon is used for the suspension arms. Achieves a good balance between flexibility to absorb impact and rigidity around the tires. *Equipped with bevel gear type differential gears on the front and rear. Ensuring smooth turning when cornering. *Full ball bearing specifications minimize drive loss. *Comes with the new powerful 550 size 14T brushed motor(G14L). The long can with Steel ring around the motor case and internal cooling fan provides efficient torque and high speeds. *The front and rear suspensions are equipped with a 12mm diameter big bore oil damper. Achieves stable driving by absorbing the impact from the road surface during off-road driving. *Ball connect type kingpins are used on the front knuckle arm up and lower. The caster angle can be easily changed in 3 steps by moving the front upper suspension arm position back and forth with a spacer. *The front and rear knuckle arms and suspension arms are shared on the left and right. Increase compatibility of spare parts. *Since the motor mount has mounting holes according to the pinion gear, troublesome backlash adjustment is unnecessary. Supports from 29T to 37T. *ESC adopts waterproof 60A "KA060-91W" with reverse. It is also possible to switch between NIMH and LiPo batteries. (Factory default setting to LiPo mode) *A 20T pinion gear and a 76T spur gear are used for the primary acceleration. Demonstrates torque corresponding to large diameter tires. Equipped with a slipper clutch as standard to protect the gear from any impact. *A soft compound is used for large-diameter monster truck tires and equipped with an inner sponge. Provides good grip both on and off. *Uses hex screws in each part. Reliable tightening torque can be applied, and maintenance is possible with even fewer tools. Simple design of the low C of G FZ02L-BT chassis features a covered speed controller and receiver. The one-piece gearbox on the main chassis optimizes torsional rigidity and is made from shock-resistant lightweight nylon. Key components deliver structural strength to realize a simple upper deckless design. Reduced number of parts and consistency in size and type of screws means a 2.0mm hex wrench can be used for nearly all flathead screws. This allows easier assembly and disassembly for maintenance. Front suspension features optimized bump steer and scrub radius combined with reliable ball-connect steering knuckles. Front-rear and left-right interchangeable hub carriers improve parts efficiency and maintenance. Oil shocks are equipped as standard and deliver stable performance in all conditions. Optimal front-rear geometrical balance realizes light handling and control stability. Equipped with long 550 size 14-turn brushed G14L motor that generates enough torque power for wheelies when the battery is fully charged so the fun of dynamic big-tire performance can be enjoyed to the full! 76T spur gear and 20T pinion gear are designed for optimal big-tire performance. Wide range of gear ratios can be used with pinion gears from 20T~29T to suit various motors. In addition, backlash adjustment is made easy by direct installation of the motor according to the number of pinion gear teeth. Includes large capacity KYOSHO SPEED HOUSE (KA060-91W) 60A speed controller with super plug (Deans) connector. Features three control modes: FWD/Brake/REV (default setting), FWD/Brake, and FWD/REV. Compatible with Li-Po battery (for safety, setting at time of shipment is Li-Po mode). Angular shape of the molded polycarbonate body is designed in the image of an American full-size van style of the 1970-1980s. Large-diameter wide tires compliment the body design and deliver strong performance with the polycarbonate roof spoiler.Extra decal sheet included to customize body. Soft compound large-diameter wide tires deliver excellent grip on a wide range of surfaces, from paved surfaces such as parking lots, to sand, dirt and even grass.

2.795,-

3.995,-

På lager 1
KJØP
-30%
Art.nr: MZP159OR
Copied
Body Overview: Kyosho Mini-Z MR-04N-RM Porsche 911 GT3 RS Body. This is a ready to install detailed body option for the MR-04N-RM platform chassis. This body is equally suited to use as a display model, or to give your existing model a face lift.    Includes: (1) Mini-Z MR-04N-RMW-LM Porsche 911 GT3 RS Body (1) Display Stand Box *Note: This product is a spare body set and cannot be run.

499,-

899,-

På lager 15
KJØP
-44%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png