This is a 12x6E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft only (not for glow engines).
FEATURES
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.
INCLUDES
One composite propeller
Five composite adapter rings
REQUIREMENTS
ALL props require balancing, this is VERY important, use top flite power point propeller balancer
May need prop reamer, use great planes 4-Step standard prop shaft reamer or great planes precision prop reamer metric
SPECIFICATIONS
Diameter: 12"
Pitch: 6
Hub inner diameter: 0.25"
This is a 13x4E Electric ONLY Composite Propeller from Advanced Precision Composites.
FEATURES
Gray composite one-piece construction
Five adapter rings that adapt to different motor shafts
INCLUDES
One composite propeller
Five composite adapter rings for motor shaft diameters of 0.128" (3.2mm), 0.158" (4mm), 0.197" (5mm), 0.237" (6mm), 0.313" (7.9mm)
REQUIREMENTS
ALL props require balancing, this is very important, use a Top flite power point propeller balancer
May need prop reamer, use great planes precision prop reamer standard or great planes precision prop reamer metric
SPECIFICATIONS
Diameter: 13"
Pitch: 4
Hub inner diameter: 0.25" (6.3mm)
COMMENTS
For use with Electric motors only. Do not use with nitro or gasoline powered engines.
This is a 10x6E Thin Composite propeller from Advanced Precision Composites For use on Electric powered aircraft
FEATURES
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adapter rings that fit into propeller hub to allow for different motor shaft diameters.
INCLUDES
One composite propeller
Five composite adapter rings
Instruction sheet
REQUIREMENTS
All props require balancing.
SPECIFICATIONS
Diameter: 10" (250mm)
Pitch: 6
Hub inner diameter: 0.25" (6.4mm)
Adapter sizes: 3.3mm (1/8"), 4mm (5/32"), 4.9mm (3/16"),6.0mm (1/4"), 8.0mm (5/16")
COMMENTSThis propeller should not be used on gas or glow engines.
This is a 11x7E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft only (not for glow engines).
FEATURES
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.
INCLUDES
One composite propeller
Five composite adapter rings
REQUIREMENTS
ALL props require balancing, this is VERY important.
May need prop reamer
SPECIFICATIONS
Diameter: 11"
Pitch: 7
Hub inner diameter: 0.25"
This is an 11x8E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft only (not for glow engines).
FEATURES
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.
INCLUDES
One composite propeller
Five composite adapter rings
REQUIREMENTS
ALL props require balancing, this is VERY important.
May need prop reamer
SPECIFICATIONS
Diameter: 11" (279mm)
Pitch: 8
Hub inner diameter: 0.25" (6.3mm)
This is a 13x6.5E Electric ONLY Composite Propeller from Advanced Precision Composites
FEATURES
Gray composite one-piece construction
Comes with five adapter rings that adapt to different motor shafts
Comes in a bag attached to a header card
INCLUDES
One composite propeller
Five composite adapter rings
REQUIREMENTS
ALL props require balancing, this is VERY important.
May need prop reamer.
SPECIFICATIONS
Diameter: 13"
Pitch: 6.5
Hub inner diameter: 0.25"
This is an APC 16x10 Electric Propeller.
FEATURES
Composite propeller construction
Thin propeller ONLY designed for Electric use
INCLUDES
One APC 16x10 Electric propeller
SPECIFICATIONS
Center hole diameter: 1/4"
Propeller diameter: 15"
Propeller pitch 10
COMMENTS
The propeller comes with five locating rings:
.128
.158
.197
.237
.313
The locating ring combines with the hub to create a precision fit.
This is a 5x5E thin composite propeller from Advanced Precision Composites.For use on Electric powered aircraft only (not for glow engines).
FEATURES
Gray composite propeller blades that assemble onto a propeller hub.
Comes with two adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.
INCLUDES
One composite propeller
Two composite adapter rings
One instruction sheet
REQUIREMENTS
ALL props require balancing
May need prop reamer
SPECIFICATIONS
Diameter: 5"
Pitch: 5
Hub inner diameter: 0.25"
This is a 6x4E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft only (not for glow engines).
FEATURES
Gray composite propeller blades that assemble onto a propeller hub.
Comes with two adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.
INCLUDES
One composite propeller
Two composite adapter rings
One instruction sheet
REQUIREMENTS
Assembly onto motor or gear drive unit in your Electric plane.
Balancing
SPECIFICATIONS
Diameter:6"
Pitch: 4
Hub inner diameter: 0.25"
This is a 9x7 Airplane Propeller that is a "tractor" (not a "pusher") Prop.
FEATURES
Computer-optimized design gives these props a thinner profile and more "bite" with less noise.
Lightweight molded nylon construction reduces rotating mass for higher output and longer life.
Reinforcing carbon fibers help maintain true, constant pitch at any rpm.
INCLUDES
One Carbon-Reinforced NYLON Propeller
REQUIREMENTS
ALL props require balancing, this is VERY important.
May need prop reamer
SPECIFICATIONS
Length: 9"
Pitch: 7
Thickness at hub: 3/8"
Hole diameter: 1/4"
This is a 9x7.5E Thin Composite propeller from Advanced Precision Composites.
For use on Electric powered aircraft only (not for glow engines).
FEATURES
Gray composite propeller blades that assemble onto a propeller hub.
Comes with five adapter rings that adapt to different motor shafts.
Comes in a bag attached to a header card.
INCLUDES
One composite propeller
Five composite adapter rings
REQUIREMENT
SALL props require balancing, this is VERY important.
May need prop reamer
SPECIFICATIONS
Diameter: 9" (229mm)
Pitch: 7.5
Hub inner diameter: 0.25" (605mm)
Thin Electric
Pitch (inches)
15
Propeller Diameter (in.)
26
Hub Diameter
1.75 in.
Hub Thickness
0.60 in.
Shaft Diameter
5/16 in.
Product Weight
7.55 oz.
Color
GREY