Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / RC4WD / 1/10 Trail Finder 2 Mojave II 4W

1/10 Trail Finder 2 Mojave II 4W

Populært i denne kategorien

 
Hovedbilde RC4WD Bull Bar (1985 Toyota 4Runner/1987 Toyota ... Hovedbilde RC4WD Bull Bar (1985 Toyota 4Runner/1987 Toyota ...
RC4WD Bull Bar (1985 Toyota 4Runner/1987 Toyota ...
Art.nr: S2133
Copied
RC4WD Bull Bar (1985 Toyota 4Runner/1987 Toyota XtraCab/Mojave II) (Chrome) Specifications: Billet Aluminum CNC Machined Chrome Plated Length: 3.30in / 84mm Width: 2.20in / 56mm Height: 2.95in / 75mm Weight: 1.51oz / 42.9g   Shown installed on RC4WD Trail Finder 2 Truck Kit "LWB" 1/10 Scale Long Wheel Base Chassis Kit (Z-K0059) with RC4WD 1987 Toyota XtraCab Hard Body Complete Set (Z-B0216) (Shown painted Red) and RC4WD KC HiLiTES Daylighter Light Set (Z-S1856) for example (Not Included) What's Included: 1x RC4WD Bull Bar (1985 Toyota 4Runner/1987 Toyota XtraCab/Mojave II) (Chrome) 2x M2 X 5mm Set Screws Optional Colors: RC4WD Bull Bar (1985 Toyota 4Runner/1987 Toyota XtraCab/Mojave II) (Black) (Z-S2134) Notes: Fits RC4WD 1987 Toyota XtraCab Hard Body Complete Set (Z-B0216)

439,-

459,-

På lager 1
KJØP
-4%
Hovedbilde RC4WD C0734 Mountable Trash Bag for Spare Tire (Tan) Hovedbilde RC4WD C0734 Mountable Trash Bag for Spare Tire (Tan)
RC4WD C0734 Mountable Trash Bag for Spare Tire (Tan)
Art.nr: C0734
Copied
Mountable Trash Bag for Spare Tire (Tan) Specifications: Weight: 0.54oz / 15.3g   What's Included: 1x Mountable Trash Bag for Spare Tire (Tan)   Optional Colors: Mountable Trash Bag for Spare Tire (Grey) (VVV-C0735)   Notes: Fits the tires whose OD are 75mm-100mm

279,-

** Ikke på lager
KJØP
Hovedbilde RC4WD D0004 The Ultimate Scale Shocks 70mm (Silver) Hovedbilde RC4WD D0004 The Ultimate Scale Shocks 70mm (Silver)
RC4WD D0004 The Ultimate Scale Shocks 70mm (Silver)
Art.nr: D0004
Copied
The Ultimate Scale Shocks 70mm (Silver) At 9mm OD, this is the most Scale and Precision Made Suspension Shocks available on the market. Along with our next gen fine Tuned Super Soft Internal Springs. Specifications: CNC Machined Aluminum Heat Treated Steel Internal Coil Spring (Super soft) Steel Rod End Ball Ball Width: 0.25in / 6.45mm Ball Lip OD: 0.19in / 4.8mm Ball Inner OD: 0.12in  / 3.1mm Hole to Hole (Compressed): 2.19in / 55.5mm Hole to Hole (Uncompressed): 2.85in / 70mm Overall Length: 3.18in / 81mm Travel Length: 0.64in / 16.3mm Shock Body OD: 0.35in / 8.9mm Shaft OD: 0.12in / 3mm Weight: 0.35oz / 10g   Shown installed on Fracture Scale RTR Truck with V8 Engine for example (Not Included) What's Included: 2x The Ultimate Scale Shocks 70mm (Silver) Replacement Parts: Internal Springs for ARB and Superlift 80mm Shocks (Z-S1179) 70mm Ultimate Scale Shocks Internal Spring Assortment (Z-S1345) Notes: For complete you need 2 set of this product These shocks do not use oil. Use a small amount to keep the shaft lubricated only. These shocks have very small threads on the shock cap. You can easily install the cap wrong and cause the threads to strip. Please pay careful attention when removing and installing the shock cap. Fits Trail Finder 2 RTR w/Mojave Body Set (Z-RTR0019 "Disc") (Front) Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024) Fits Trail Finder 2 Truck Kit w/Mojave Body Set (Z-K0042 "Disc") RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049) Fits RC4WD Worminator 6x6 RTR Truck with Brushless System (Z-RTR0014) (Front / Middle / Rear) Fits RC4WD Gelande II Truck Kit w/D90 Body Set (Z-K0001) (Front / Rear) Fits Tamiya Sand Scorcher (Front) Use blue (medium) thread lock to the bottom shock shaft rod end before installing onto your vehicle to help keep it in place.

299,-

** Ikke på lager
KJØP
Hovedbilde RC4WD D0072 Bilstein SZ Series 80mm Scale Shock ... Hovedbilde RC4WD D0072 Bilstein SZ Series 80mm Scale Shock ...
RC4WD D0072 Bilstein SZ Series 80mm Scale Shock ...
Art.nr: D0072
Copied
RC4WD Bilstein SZ Series 80mm Scale Shock Absorbers   These are the all new RC4WD Bilstein SZ Series 80mm Scale Shock Absorbers. Designed to minimize the vibrations from the springs, these shocks come in a clean silver anodized finish with trademark yellow and blue decals to provide the Bilstein signature brand look. They are officially licensed by BILSTEIN Shocks and are only available from RC4WD and our Dealers.     Specifications: CNC Machined Billet Aluminum  Silver Anodized Finish  Internal Spring Design Hole to Hole (Compressed): 2.42in / 61.2mm Hole to Hole (Uncompressed): 3.15in / 80mm Overall Length: 3.45in / 87.6mm Travel Length: 0.80in / 20.2mm Shock Body OD: 0.39in / 10mm Shaft Diameter: 0.13in / 3.5mm Each Weight: 0.39oz / 11.0g   Shown installed on RC4WD Trail Finder 2 Truck Kit (Z-K0054) for example (Not included)    What’s Included: 2x RC4WD Bilstein SZ Series 80mm Scale Shock Absorbers 1x Bilstein Decal Sheet   Notes: Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024) Fits RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030) Fits RC4WD Gelande II RTR Truck Kit w/D90 Body Set (Z-RTR0031) Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049) Fits RC4WD Trail Finder 2 Truck Kit "LWB" w/ Mojave II Four Door Body Set (Z-K0058) Fits RC4WD Trail Finder 2 Truck Kit (Z-K0054) Fits RC4WD Trail Finder 2 Truck Kit "LWB" 1/10 Scale Long Wheel Base Chassis Kit (Z-K0059) Fits RC4WD Gelande II Truck Kit w/D90 Body Set (Z-K0001) Bilstein is a registered trademark of the Bilstein company. The Bilstein logo is property of Bilstein and used under license to RC4WD.

579,-

599,-

På lager 2
KJØP
-3%
Hovedbilde RC4WD D0074 Bilstein SZ Series 100mm Scale Shock ... Hovedbilde RC4WD D0074 Bilstein SZ Series 100mm Scale Shock ...
RC4WD D0074 Bilstein SZ Series 100mm Scale Shock ...
Art.nr: D0074
Copied
RC4WD Bilstein SZ Series 100mm Scale Shock Absorbers   These are the all new RC4WD Bilstein SZ Series 100mm Scale Shock Absorbers. Designed to minimize the vibrations from the springs, these shocks come in a clean silver anodized finish with trademark yellow and blue decals to provide the Bilstein signature brand look. They are officially licensed by BILSTEIN Shocks and are only available from RC4WD and our Dealers.     Specifications: CNC Machined Billet Aluminum  Silver Anodized Finish  Internal Spring Design Hole to Hole (Compressed): 2.572in / 69.0mm Hole to Hole (Uncompressed): 3.94in / 100.0mm Overall Length: 4.28in / 108.64mm Travel Length: 0.80in / 20.2mm Shock Body OD: 0.39in / 10mm Shaft Diameter: 0.13in / 3.5mm Each Weight: 0.49oz / 12.50g     Shown installed on Axial SCX10 II for example (Not included)     What’s Included: 2x RC4WD Bilstein SZ Series 100mm Scale Shock Absorbers 1x Bilstein Decal Sheet   Notes: Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024), but will require 1mm spacer Fits RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030), but will require 1mm spacer Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049), but will require 1mm spacer Fits RC4WD Trail Finder 2 Truck Kit "LWB" w/ Mojave II Four Door Body Set (Z-K0058), but will require 1mm spacer Fits RC4WD Trail Finder 2 Truck Kit (Z-K0054), but will require 1mm spacer Fits RC4WD Trail Finder 2 Truck Kit "LWB" 1/10 Scale Long Wheel Base Chassis Kit (Z-K0059), but will require 1mm spacer Fits Axial SCX10 II Bilstein is a registered trademark of the Bilstein company. The Bilstein logo is property of Bilstein and used under license to RC4WD.

469,-

499,-

** Ikke på lager
KJØP
-6%
Hovedbilde RC4WD D0075 Bilstein SZ Series 90mm Scale Shock ... Hovedbilde RC4WD D0075 Bilstein SZ Series 90mm Scale Shock ...
RC4WD D0075 Bilstein SZ Series 90mm Scale Shock ...
Art.nr: D0075
Copied
RC4WD Bilstein SZ Series 90mm Scale Shock Absorbers   These are the all new RC4WD Bilstein SZ Series 90mm Scale Shock Absorbers. Designed to minimize the vibrations from the springs, these shocks come in a clean silver anodized finish with trademark yellow and blue decals to provide the Bilstein signature brand look. They are officially licensed by BILSTEIN Shocks and are only available from RC4WD and our Dealers.     Specifications: CNC Machined Billet Aluminum  Silver Anodized Finish  Internal Spring Design Hole to Hole (Compressed): 2.59in / 65.7mm Hole to Hole (Uncompressed): 3.54in / 90mm Overall Length: 3.90in / 99.0mm Travel Length: 0.80in / 20.2mm Shock Body OD: 0.39in / 10mm Shaft Diameter: 0.13in / 3.5mm Each Weight: 0.41oz / 11.50g     Shown installed on RC4WD Trail Finder 2 Truck Kit (Z-K0054) for example (Not included)    What’s Included: 2x RC4WD Bilstein SZ Series 90mm Scale Shock Absorbers 1x Bilstein Decal Sheet   Notes: Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024), but will require 1mm spacer Fits RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030), but will require 1mm spacer Fits RC4WD Gelande II RTR Truck Kit w/D90 Body Set (Z-RTR0031) Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049), but will require 1mm spacer Fits RC4WD Trail Finder 2 Truck Kit "LWB" w/ Mojave II Four Door Body Set (Z-K0058), but will require 1mm spacer Fits RC4WD Trail Finder 2 Truck Kit (Z-K0054), but will require 1mm spacer Fits RC4WD Trail Finder 2 Truck Kit "LWB" 1/10 Scale Long Wheel Base Chassis Kit (Z-K0059), but will require 1mm spacer Fits RC4WD Gelande II Truck Kit w/D90 Body Set (Z-K0001), but will require 1mm spacer Bilstein is a registered trademark of the Bilstein company. The Bilstein logo is property of Bilstein and used under license to RC4WD.

469,-

499,-

På lager 1
KJØP
-6%
Hovedbilde RC4WD E0119 1/10 Warn 9.5cti-s Winch Hovedbilde RC4WD E0119 1/10 Warn 9.5cti-s Winch
RC4WD E0119 1/10 Warn 9.5cti-s Winch
Art.nr: E0119
Copied
RC4WD 1/10 Warn 9.5cti-s Winch One of the most iconic names in off-road. This is an all new RC4WD 1/10 Warn 9.5cti winch. This winch offers ultra scale looks, and superior quality and craftsmanship. Officially Licensed by Warn.     Specifications:   Cast Zinc Case Stamped Steel Components Working Spring Loaded Warn Hook Synthetic Winch Rope Highly Detailed Full Warn Decals Installed Voltage: 6v to 11.1v Can operate on 3 Cell Lipo Easily Rebuildable 3ft/.9M Rope Pre-Installed Same Mounting Locations as Bulldog Winch Load Limits: Dead Lift 6.6lbs/3kgs Load Limits: Rolling Drag 9lbs/4.1kgs 30 Day Warranty Length: 2.98in / 75.85mm Total Width: 1.16in / 29.62mm Height: 1.39in / 35.35mm Weight: 3.39oz / 96.2g     What's Included:         1x RC4WD 1/10 Warn 9.5cti-s Winch            1x RC4WD Warn Winch Pull Tag 4x M2.5x4mm SHCS (Black) (Z-S0760) 4x M2.5x6mm SHCS (Black) (Z-S0855) 1x Warn Decal Sheet   Required Parts: RC4WD Warn 1/10 Wireless Remote/Receiver Winch Controller Set (Z-S1092) RC4WD Wired Winch Control Unit (Z-S1089)   Optional Parts: RC4WD ARB Winch Snatch Block (Z-S0341) RC4WD 1/10 Warn 9.5cti Winch CNC Mounting Plates (Z-S1168) RC4WD 1/10 Warn Hawse Polished Aluminum Fairlead (Z-S1310) Winch Mount for Axial Wraith (Z-S1307) RC4WD Marlin Crawler Front Winch Bumper for Trail Finder 2 (Z-S1496) RC4WD Rock Hard 4x4 Full Width Front Bumper for Axial SCX10 Jeep (Z-S1338) RC4WD 1/10 Viking Roller Fairlead for Warn 9.5cti Winch (Z-S1498) RC4WD Warn 1/10 Premium Winch Hook (Z-S1551) RC4WD Warn Rock Crawler Front Winch Bumper for Trail Finder 2 (Z-S1590) (With Mount Plate Reversed) Metal Front Winch Bumper for Traxxas TRX-4 Land Rover Defender D110 (VVV-C0469) RC4WD Warn Epic Sidewinder (Chrome) (Z-S1997) RC4WD Warn Epic Sidewinder (Black) (Z-S1998) RC4WD WARN Epic Hyperlink (Chrome) (Z-S1999) RC4WD WARN Epic Hyperlink (Black) (Z-S2000)   Replacement Parts: Replacement Motor/Gearbox 1/10 Warn 9.5cti 1/10 Winch (Z-E0051) 1/10 Warn Hook (Z-S1011) Synthetic Winch Rope (Z-S0038) RC4WD Warn Winch Pull Tags (Z-S1660)   Replacement Hardware: 4x M2x5mm FHCS (Silver) 2x M2x4mm SHCS (Silver) (Z-S0927) 2x M2x6mm SHCS (Silver) (Z-S0994)   Notes: This winch requires a control unit. We offer both a wired (uses your radio's third channel) and wireless unit (hooks directly to a battery). This product is not waterproof. You may be able to waterproof on your own, but this will void the manufactures warranty. Same mounting points as our Bulldog winches Dead Lift is defined as the winch lifting a product from a higher position with no help from the product being lifted. Rolling Drag is defines as a truck using its rolling force to help the winch pull a truck or products weight.   Warranty Definition: This product will be free from defects in materials and workmanship and fully functional when new. The gearbox can handle certain weight limits. If you over load the winch, the gearbox or motor will fail. This is not considered a warranty issue. We have replacement motor/gearbox units and provide clear instructions on replacement. Warn and the Warn name are registered trademarks of Warn Industries. The Warn logo is property of Warn Industries and used under license to RC4WD.

399,-

599,-

På lager 6
KJØP
-33%
Hovedbilde RC4WD S1345 70mm Ultimate Scale Shocks Internal Spring ... Hovedbilde RC4WD S1345 70mm Ultimate Scale Shocks Internal Spring ...
RC4WD S1345 70mm Ultimate Scale Shocks Internal Spring ...
Art.nr: S1345
Copied
70mm Ultimate Scale Shocks Internal Spring Assortment Optional internal springs for 70mm Ultimate Scale shocks. Allow you to adjust your dampening for many applications.  Specifications: Surface Treatment: Black Enough for 4 Shocks OD: 0.22in / 5.6mm ID: 0.18in / 4.46mm Length: 1.16in / 29.5mm Weight: 0.39oz / 11g What's Included: 4x 70mm Shock Spring (1.2 Spring Rate "Green") 4x 70mm Shock Spring (1.6 Spring Rate "Red") 4x 70mm Shock Spring (0.8 Spring Rate "White") 4x 70mm Shock Spring (2.0 Spring Rate "Black") Notes: Fits The Ultimate Scale Shocks 70mm (Silver) (Z-D0004) Each spring has a small color marking on the bottom to determine the spring rate 70mm Pressed to 25mm, Spring Rate: 1.32N

129,-

På lager 1
KJØP
Hovedbilde RC4WD S1815 Super Soft Flex Leaf Springs for TF2 (4) Hovedbilde RC4WD S1815 Super Soft Flex Leaf Springs for TF2 (4)
RC4WD S1815 Super Soft Flex Leaf Springs for TF2 (4)
Art.nr: S1815
Copied
Super Soft Flex Leaf Springs for TF2 (4)   Specifications: Super Durable Steel Leaf Springs Stiff Spring Increases Payload Capacity Simple Installation, No Modifications Required Total Length: 4.94in / 125.5mm Total Weight: 1.5oz / 43g Manufactured by RC4WD     Shown installed on RC4WD Marlin Crawler Trail Finder 2 RTR w/Mojave II Crawler Body Set (Z-RTR0034) for example (Not Included)   What’s Included: 4x Super Soft Flex Leaf Springs for TF2 (4)   Optional Parts:  Yota II Ultimate Scale Cast Axle (Rear) (Z-A0081) Yota II Ultimate Scale Cast Axle (Front) (Z-A0080)    Notes: Fits RC4WD Marlin Crawler Trail Finder 2 RTR w/Mojave II Crawler Body Set (Z-RTR0034) Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024) Fits RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030) Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049) Fits RC4WD Trail Finder 2 Truck Kit "LWB" w/ Mojave II Four Door Body Set (Z-K0058) Fits RC4WD Trail Finder 2 Truck Kit (Z-K0054) Fits RC4WD Trail Finder 2 Truck Kit "LWB" 1/10 Scale Long Wheel Base Chassis Kit (Z-K0059)

439,-

459,-

** Ikke på lager
KJØP
-4%
Hovedbilde RC4WD S1826 Safari Snorkel for 1982 Toyota ... Hovedbilde RC4WD S1826 Safari Snorkel for 1982 Toyota ...
RC4WD S1826 Safari Snorkel for 1982 Toyota ...
Art.nr: Z-S1826
Copied
RC4WD Safari Snorkel for 1982 Toyota Pickup/Mojave II     This is the new Licensed Safari Snorkel for your 1982 Toyota Pickup/Mojave II. It is extremely scale, tough, stylist and designed to deliver a huge volume of the cleanest air possible into your RC4WD Mojave II 2 or 4 Door Body! This have been Officially Licensed by the Safari Snorkel company and is only available from RC4WD and our Dealers.   Specifications: ABS Plastic Injection Molding Black Durable Rubber Silver Various Steel Material Total Length: 5.06in / 128.1mm Weight: 0.51oz / 14.5g Manufactured by RC4WD What's Included: 1x RC4WD Safari Snorkel for 1982 Toyota Pickup/Mojave II 1x Double Sided Adhesive for Snorkel Base 1x Safari Snorkel Decal Sheet     Safari Snorkel is registered trademarks of the Safari Snorkel company. The Safari Snorkel logo is property of Safari Snorkel and used under license to RC4WD.

325,-

355,-

På lager 2
KJØP
-8%
Hovedbilde RC4WD S1859 Blade Snow Plow Mounting Kit for Trail ... Hovedbilde RC4WD S1859 Blade Snow Plow Mounting Kit for Trail ...
RC4WD S1859 Blade Snow Plow Mounting Kit for Trail ...
Art.nr: S1859
Copied
Blade Snow Plow Mounting Kit for Trail Finder 2 / G2 These will allow you to mount the RC4WD Blade Snow Plow unit to your Trail Finder 2 / G2 truck.   Specifications: CNC Machined Direct fit for Trail Finder 2 / G2 Truck Easy Installation  Weight: 0.28oz / 8.0g Manufactured by RC4WD   What’s Included: 2x Blade Snow Plow Mounting Kit for Trail Finder 2 / G2 2x Steel Flat Head Socket Cap Screw M3 x 6mm (Z-S0648) 1x Instruction Manual   Optional Parts:  RC4WD Super Duty Blade Snow Plow (Red) (Z-X0041) RC4WD Super Duty Blade Snow Plow (Yellow) (Z-X0043)   Notes: Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024), but will require modifications. Fits RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030), but will require modifications. Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049), but will require modifications. Fits RC4WD Trail Finder 2 Truck Kit "LWB" w/ Mojave II Four Door Body Set (Z-K0058), but will require modifications. Fits RC4WD Trail Finder 2 Truck Kit (Z-K0054) Fits RC4WD Trail Finder 2 Truck Kit "LWB" 1/10 Scale Long Wheel Base Chassis Kit (Z-K0059) Fits RC4WD Gelande II RTR Truck Kit w/D90 Body Set (Z-RTR0031) Fits RC4WD Gelande II Truck Kit w/D90 Body Set (Z-K0001)

119,-

129,-

På lager 1
KJØP
-8%
Hovedbilde RC4WD S1923 Reverse Mount Spring Hanger Conversion Kit ... Hovedbilde RC4WD S1923 Reverse Mount Spring Hanger Conversion Kit ...
RC4WD S1923 Reverse Mount Spring Hanger Conversion Kit ...
Art.nr: S1923
Copied
Reverse Mount Spring Hanger Conversion Kit for TF2 and TF2 LWB     Specifications: Heavy Duty Stamped Steel Black Powder-coated Finish Total Weight: 0.36oz / 10.0g           Shown installed on RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030) for example (Not Included)     Shown installed on RC4WD Trail Finder 2 Truck Kit "SWB" (Z-K0045) for example (Not Included)     Shown installed on RC4WD Marlin Crawler Trail Finder 2 RTR w/Mojave II Crawler Body Set (Z-RTR0034) for example (Not Included)         What's Included: 2x Reverse Mount Spring Hanger Brackets 2x Flanged Brass Knuckle Bushings 4x Steel Leaf Spring Shackles 2x Brass Bushings 4x M3 x 14mm Steel Button Head Cap Screws (Black) 4x Nylock Nuts M3 (Black)   Replacement Hardware: Nylock Nuts M3 (Black) (Z-S0629) Steel Button Head Cap Screws M3 x 14mm (Z-S0655)   Notes: Fits RC4WD Trail Finder 2 RTR w/Mojave II Body Set (Z-RTR0024) Fits RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030) Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049) Fits RC4WD Trail Finder 2 Truck Kit "LWB" w/ Mojave II Four Door Body Set (Z-K0058) Fits RC4WD Trail Finder 2 Truck Kit (Z-K0054) Fits RC4WD Trail Finder 2 Truck Kit "LWB" 1/10 Scale Long Wheel Base Chassis Kit (Z-K0059)

299,-

319,-

** Ikke på lager
KJØP
-6%
Hovedbilde RC4WD X0053 Type B Machine Front Winch Bumper for TF2 Hovedbilde RC4WD X0053 Type B Machine Front Winch Bumper for TF2
RC4WD X0053 Type B Machine Front Winch Bumper for TF2
Art.nr: X0053
Copied
RC4WD Type B Machine Front Winch Bumper for TF2 Specifications:   Heavy Duty Steel Tube Hand Welded Billet Aluminum CNC Machined Black Powder-coated Finish Corrosion Resistant    Length: 6.93in / 176.0mm Height: 2.29in / 58.1mm Width: 2.55in / 64.7mm Weight: 7.12oz / 201.0g   What's Included:                     1x RC4WD Type B Machine Front Winch Bumper for TF2 2x M3 x 12mm Set Screw (Z-S1057)   Optional Parts: RC4WD 1/10 Warn Hawse Polished Aluminum Fairlead (Z-S1310) RC4WD 1/10 Warn Warn Hawse Fairlead (Black) (Z-S1315) RC4WD 1/10 Warn 8274 Winch (Z-E0075) RC4WD 1/8 Warn Zeon 10 Winch (Z-E0069) RC4WD 1/10 Mini Warn 9.5cti Winch (Z-S1571) RC4WD 1/10 Warn 9.5cti Winch (Z-S1079)   Replacement Hardware: M3 X 5mm Set Screw (Z-S0125) M2.5 x 5mm Set Screws (Z-S1771) M3 x 12mm Set Screw (Z-S1057)   Notes: Fits RC4WD Trail Finder 2 "LWB" RTR w/Mojave II Four Door Body Set (Z-RTR0030) Fits RC4WD Trail Finder 2 Truck Kit w/Mojave II Body Set (Z-K0049) Fits RC4WD Trail Finder 2 Truck Kit "LWB" w/ Mojave II Four Door Body Set (Z-K0058) Fits RC4WD Trail Finder 2 Truck Kit (Z-K0054) Fits RC4WD Trail Finder 2 Truck Kit "LWB" 1/10 Scale Long Wheel Base Chassis Kit (Z-K0059) Fits RC4WD Marlin Crawler Trail Finder 2 RTR w/Mojave II Crawler Body Set (Z-RTR0034) Installing the winch requires removal of the 2 bumper mounts on the bumper

599,-

649,-

På lager 1
KJØP
-8%
Hovedbilde Yeah Racing LK-0034 2 Channel Programmable LED ...
Yeah Racing LK-0034 2 Channel Programmable LED ...
Art.nr: LK-0034
Copied
Yeah Racing 2 Channel Programmable LED Lighting System For 1/10 RC Car Simple R/C LED light kit solution with this unit, sort out which lights you want to blink and which you don't by plugging them into each of the slots. The case is made of a sturdy yet lightweight plastic which will allow for easy installation on bodies without over burdening your car! The LEDs are programmable and controllable through your radio for your convenience! The LED bulbs can be exchanged which makes changing the colors very simple, with Futaba connectors which can be swapped out for different lengths which makes installing this kit in any body a possibility!   Specification: 10 LED Cable slots Box Color: Red   Include: LED Lighting System Box (1 pc) LED Cables (10 pcs) LED Bulbs (20 pcs) Connector Cables (2 pcs)

479,-

499,-

På lager 1
KJØP
-4%
Hovedbilde Yeah Racing WA-023BK Aluminum Hex Adaptor 15mm Offset ... Hovedbilde Yeah Racing WA-023BK Aluminum Hex Adaptor 15mm Offset ...
Yeah Racing WA-023BK Aluminum Hex Adaptor 15mm Offset ...
Art.nr: WA-023BK
Copied
Yeah Racing Aluminum Hex Adaptor 15mm Offset For 12mm Hex Wheels Black 4pcs These offset hex adaptors allow you to drastically change the track width of your crawler. By increasing the trackwidth, the stability of your truck or rig will be increased as it will prevent it from toppling over on inclined climb spots! By increasing the trackwidth, your chassis flex is also increased due to a leverage effect of being able to put more force on the outter wheel which translates to more grip during climbs! Note: This will fit wheels with a center hole of at least 5mm.       Features: For: 1/10 Crawlers Material: Aluminum   Includes: Aluminum Hex Adaptors (4 pcs) Aluminum Hex Locking Post (4 pcs) Set Screw (4 pcs)

219,-

249,-

På lager 3
KJØP
-12%
Hovedbilde Yeah Racing WA-023BU Aluminum Hex Adaptor 15mm Offset ... Hovedbilde Yeah Racing WA-023BU Aluminum Hex Adaptor 15mm Offset ...
Yeah Racing WA-023BU Aluminum Hex Adaptor 15mm Offset ...
Art.nr: WA-023BU
Copied
Yeah Racing Aluminum Hex Adaptor 15mm Offset For 12mm Hex Wheels Blue 4pcs Description: These offset hex adaptors allow you to drastically change the track width of your crawler. By increasing the trackwidth, the stability of your truck or rig will be increased as it will prevent it from toppling over on inclined climb spots! By increasing the trackwidth, your chassis flex is also increased due to a leverage effect of being able to put more force on the outter wheel which translates to more grip during climbs! Note: This will fit wheels with a center hole of at least 5mm. *Photos for reference only. Feature: For: 1/10 Crawlers Material: Aluminum Include: Aluminum Hex Adaptors (4 pcs) Aluminum Hex Locking Post (4 pcs) Set Screw (4 pcs)  

219,-

249,-

** Ikke på lager
KJØP
-12%
Hovedbilde Yeah Racing WA-023RD Aluminum Hex Adaptor 15mm Offset ... Hovedbilde Yeah Racing WA-023RD Aluminum Hex Adaptor 15mm Offset ...
Yeah Racing WA-023RD Aluminum Hex Adaptor 15mm Offset ...
Art.nr: WA-023RD
Copied
Yeah Racing Aluminum Hex Adaptor 15mm Offset For 12mm Hex Wheels RED 4pcs Description: These offset hex adaptors allow you to drastically change the track width of your crawler. By increasing the trackwidth, the stability of your truck or rig will be increased as it will prevent it from toppling over on inclined climb spots! By increasing the trackwidth, your chassis flex is also increased due to a leverage effect of being able to put more force on the outer wheel which translates to more grip during climbs! Note: This will fit wheels with a center hole of at least 5mm. *Photos for reference only. Feature: For: 1/10 Crawlers Material: Aluminum Include: Aluminum Hex Adaptors (4 pcs) Aluminum Hex Locking Post (4 pcs) Set Screw (4 pcs)  

219,-

249,-

** Ikke på lager
KJØP
-12%
Hovedbilde Yeah Racing YA-0458 Steel Diamond Plate Accessory Type ... Hovedbilde Yeah Racing YA-0458 Steel Diamond Plate Accessory Type ...
Yeah Racing YA-0458 Steel Diamond Plate Accessory Type ...
Art.nr: YA-0458
Copied
Yeah Racing Steel Diamond Plate Accessory Type A 14cm X 20cm For Crawler Tractor Truck Featuring an embossed pattern, this Steel Diamond Plate accessory will give you the scale realism look commonly found on real cars! Made of aluminum sheet, so you can get that metallic look without the weight! Can be easily shapped by cutting with scissors means that you will be able to fit this into anywhere you please!   Features: For: Scale Bodies Color: Silver Material: Steel   Specifications: Width: 140mm Height: 200mm   Includes: Steel Diamond Plate Accessory Type A (1 pc)

179,-

199,-

** Ikke på lager
KJØP
-10%
Hovedbilde RC4WD 2141 Double Steel Tube Front Bumper (1987 ... Hovedbilde RC4WD 2141 Double Steel Tube Front Bumper (1987 ...
RC4WD 2141 Double Steel Tube Front Bumper (1987 ...
Art.nr: S2141
Copied
Double Steel Tube Front Bumper (1987 XtraCab / 1985 4Runner)     Specifications: Heavy Duty Steel Tube Black Powder Coated Finish Bumper CNC Machined Billet Aluminum Mount with Black Anodized Finish Length: 8.22in / 209mm Width: 1.51in / 38.5mm Height: 2.05in / 52.1mm Weight: 4.28oz / 121.5g             Shown installed on RC4WD Trail Finder 2 “LWB” RTR w/ 1987 Toyota XtraCab Hard Body Set for example (Not Included)           Shown installed on RC4WD Trail Finder 2 RTR w/ 1985 Toyota 4Runner Hard Body Set (Limited Edition) for example (Not Included)       What's Included: 1x Double Steel Tube Front Bumper (1987 XtraCab / 1985 4Runner) 1x Bumper Mount 2x M3 x 6mm Steel Button Head Cap Screws 2x M3 X 10mm Button Head Self Tapping Screws (Black) 2x M3 Driveshaft Screw Pins   Replacement Parts: RC4WD End Caps for 7mm Tube Bumpers (Z-S0078) Bumper Mount for 1987 XtraCab Hard Body Set Double Steel Tube Front Bumper (Z-S2172)   Replacement Hardware: Steel Button Head Cap Screws M3 x 6mm (Z-S0651) Button Head Self Tapping Screws M3 X 10mm (Black) (Z-S1578) M3 Driveshaft Screw Pin (Z-S0804)   Instruction Manual: Click here to download

649,-

699,-

På lager 1
KJØP
-7%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png