Hopp til innhold

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

 
Art.nr: TRX 10257-ORNG
Copied
Traxxas 10257-ORNG - Aluminium Wheel Washers Wheel washers, machined aluminum, orange (4) Upgrade your Maxx® Slash® wheels with this set of four brightly anodized aluminum wheel washers. Accessory for: Maxx® Slash®

239,-

259,-

KJØP
-8%
Art.nr: TRX 10257-RED
Copied
Traxxas 10257-RED - Aluminium Wheel Washers Wheel washers, machined aluminum, red (4) Upgrade your Maxx® Slash® wheels with this set of four brightly anodized aluminum wheel washers. Accessory for: Maxx® Slash®

239,-

259,-

KJØP
-8%
Art.nr: TRX 10260
Copied
Traxxas 10260 - Motor Mout Cap Plate Motor mount cap Replacement motor mount cap Replacement part for these models: Maxx® Slash®

69,-

KJØP
Art.nr: TRX 10262-BLUE
Copied
Traxxas 10262-BLUE - Aluminium Motor Mount Set Motor mounts (front & rear) (blue-anodized 6061-T6 aluminum)/ 3x10mm CCS (with threadlock) (4)/ 4x12mm BCS (with threadlock) (2) (for use with #3483 motor) Add strength and style to your Maxx® Slash® with this aluminum motor cradle. The motor cradle is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Combine the cradle with the 10263-series aluminum motor mount cap for a winning combination. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time.

469,-

519,-

KJØP
-10%
Art.nr: TRX 10262-GRAY
Copied
Traxxas 10262-GRAY - Aluminium Motor Mount Set Motor mounts (front & rear) (grey-anodized 6061-T6 aluminum)/ 3x10mm CCS (with threadlock) (4)/ 4x12mm BCS (with threadlock) (2) (for use with #3483 motor) Add strength and style to your Maxx® Slash® with this aluminum motor cradle. The motor cradle is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Combine the cradle with the 10263-series aluminum motor mount cap for a winning combination. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time.

469,-

519,-

KJØP
-10%
Art.nr: TRX 10262-GRN
Copied
Traxxas 10262-GRN - Aluminium Motor Mount Set Motor mounts (front & rear) (green-anodized 6061-T6 aluminum)/ 3x10mm CCS (with threadlock) (4)/ 4x12mm BCS (with threadlock) (2) (for use with #3483 motor) Add strength and style to your Maxx® Slash® with this aluminum motor cradle. The motor cradle is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Combine the cradle with the 10263-series aluminum motor mount cap for a winning combination. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time.

469,-

519,-

KJØP
-10%
Art.nr: TRX 10262-ORNG
Copied
Traxxas 10262-ORNG - Aluminium Motor Mount Set Motor mounts (front & rear) (orange-anodized 6061-T6 aluminum)/ 3x10mm CCS (with threadlock) (4)/ 4x12mm BCS (with threadlock) (2) (for use with #3483 motor) Add strength and style to your Maxx® Slash® with this aluminum motor cradle. The motor cradle is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Combine the cradle with the 10263-series aluminum motor mount cap for a winning combination. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time.

469,-

519,-

KJØP
-10%
Art.nr: TRX 10262-RED
Copied
Traxxas 10262-RED - Aluminium Motor Mount Set Motor mounts (front & rear) (red-anodized 6061-T6 aluminum)/ 3x10mm CCS (with threadlock) (4)/ 4x12mm BCS (with threadlock) (2) (for use with #3483 motor) Add strength and style to your Maxx® Slash® with this aluminum motor cradle. The motor cradle is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Combine the cradle with the 10263-series aluminum motor mount cap for a winning combination. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time.

469,-

519,-

KJØP
-10%
Art.nr: TRX 10263-BLUE
Copied
Traxxas 10263-BLUE - Aluminium Motor Mount Cap Plate Motor mount cap, 6061-T6 aluminum (blue-anodized) Add strength and style to your Maxx® Slash® with this aluminum motor mount cap. The motor mount cap is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Combine the motor mount cap with the 10263-series aluminum motor cradle for the ultimate rock-solid gear mesh. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time.

259,-

279,-

KJØP
-7%
Art.nr: TRX 10263-GRAY
Copied
Traxxas 10263-GRAY - Aluminium Motor Mount Cap Plate Motor mount cap, 6061-T6 aluminum (grey-anodized) Add strength and style to your Maxx® Slash® with this aluminum motor mount cap. The motor mount cap is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Combine the motor mount cap with the 10263-series aluminum motor cradle for the ultimate rock-solid gear mesh. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time.

259,-

279,-

KJØP
-7%
Art.nr: TRX 10263-GRN
Copied
Traxxas 10263-GRN - Aluminium Motor Mount Cap Plate Motor mount cap, 6061-T6 aluminum (green-anodized) Add strength and style to your Maxx® Slash® with this aluminum motor mount cap. The motor mount cap is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Combine the motor mount cap with the 10263-series aluminum motor cradle for the ultimate rock-solid gear mesh. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time.

259,-

279,-

KJØP
-7%
Art.nr: TRX 10263-ORNG
Copied
Traxxas 10263-ORNG - Aluminium Motor Mount Cap Plate Motor mount cap, 6061-T6 aluminum (orange-anodized) Add strength and style to your Maxx® Slash® with this aluminum motor mount cap. The motor mount cap is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Combine the motor mount cap with the 10263-series aluminum motor cradle for the ultimate rock-solid gear mesh. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time.

259,-

279,-

KJØP
-7%
Art.nr: TRX 10263-RED
Copied
Traxxas 10263-RED - Aluminium Motor Mount Cap Plate Motor mount cap, 6061-T6 aluminum (red-anodized) Add strength and style to your Maxx® Slash® with this aluminum motor mount cap. The motor mount cap is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Combine the motor mount cap with the 10263-series aluminum motor cradle for the ultimate rock-solid gear mesh. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time.

259,-

279,-

KJØP
-7%
Art.nr: TRX 10270
Copied
Traxxas 10270 - Tires Maxx Slash Tires, Maxx Slash® (belted) (2)/ foam inserts (2) Large 5.3″ diameter Maxx SC belted tires with foam inserts feature wide tread blocks for sure-footed traction on just about any surface. The innovative belted design combines with a long-wearing rubber compound for total control across a variety of terrain. Belted Maxx SC tires work just as well on pavement and provide realistic performance as you powerslide around corners. Maxx SC belted tires limit high-speed tire expansion for a larger, flatter contact patch and game-changing precision and control. Tire uniformity is critical for stability, especially at speeds of 50 mph and beyond. Fits 2.2″ x 3.2″ dual-profile SCT wheels. Sold as a pair. Replacement part for these models: Maxx® Slash®

639,-

679,-

KJØP
-6%
Art.nr: TRX 10271
Copied
Traxxas 10271 - Wheels Wheels (black) (2) Pair of black multi-spoke SCT wheels feature a dual-profile design with a 2.2″ outer diameter and 3.2″ inner diameter. Fits 17 mm splined hex, front or rear. Replacement part for these models: Maxx® Slash®

109,-

119,-

KJØP
-8%
Art.nr: TRX 10278
Copied
Traxxas 10278 Wheelie bar, assembled (fits Maxx® or Maxx Slash®) With the hard-hitting punch of big brushless horsepower, an adjustable wheelie bar is practically a necessity. This adjustable wheelie bar maximizes traction and control during full throttle acceleration. Set it low to prevent lift during full throttle acceleration on hard surfaces, or set it higher to limit wheelies during high-speed, high-flying off-road action. Replacement part for these models: Maxx® Slash®

329,-

369,-

KJØP
-11%
Art.nr: TRX 10280A
Copied
Traxxas 10280A - Differential Differential kit, center (complete) (aluminum carrier, 100K wt differential fluid) (fits Maxx® or Maxx® Slash®) The high-performance center differential absorbs driveline shocks to improve durability and distribute power evenly for mind-bending acceleration. The finned aluminum housing helps dissipate heat with a tough 44-tooth, mod 1 (1.0 metric pitch) steel spur gear for maximum durability. The sealed differential comes pre-loaded with 100k silicone oil to help prevent unloading and ballooning of the front tires. Replacement part for these models: Maxx® Slash® Accessory part for these models: Maxx®

879,-

KJØP
Art.nr: TRX 10281
Copied
Traxxas 10281 - Diff Carrier set Carrier, differential (aluminum)/ o-ring gaskets (2)/ ring gear gasket/ spacers (4)/ 12.2x18x0.5 MW/ 3x15mm flat-head machine screws (with threadlock) (4) Replacement aluminum differential carrier and seals for the 10280A center differential. Includes 3x15 mm screws (4). Not compatible with 8980 center differential Replacement part for these models: Maxx® Slash®

249,-

KJØP
Art.nr: TRX 10287-BLUE
Copied
Traxxas 10287-BLUE Cover, gear (blue-anodized 6061-T6 aluminum) Add strength and style to your Maxx® Slash® with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. Accessory part for these models: Maxx® Slash®

419,-

449,-

KJØP
-7%
Art.nr: TRX 10287-GRAY
Copied
Traxxas 10287-GRAY Cover, gear (grey-anodized 6061-T6 aluminum) Add strength and style to your Maxx® Slash® with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. Accessory part for these models: Maxx® Slash®

419,-

449,-

KJØP
-7%
Art.nr: TRX 10287-GRN
Copied
Traxxas 10287-GRN Cover, gear (green-anodized 6061-T6 aluminum) Add strength and style to your Maxx® Slash® with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. Accessory part for these models: Maxx® Slash®

419,-

449,-

KJØP
-7%
Art.nr: TRX 10287-ORNG
Copied
Traxxas 10287-ORNG Cover, gear (orange-anodized 6061-T6 aluminum) Add strength and style to your Maxx® Slash® with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. Accessory part for these models: Maxx® Slash®

419,-

449,-

KJØP
-7%
Art.nr: TRX 10287-RED
Copied
Traxxas 10287-RED Cover, gear (red-anodized 6061-T6 aluminum) Add strength and style to your Maxx® Slash® with this aluminum gear cover. The gear cover is machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. Accessory part for these models: Maxx® Slash®

419,-

449,-

KJØP
-7%
Art.nr: TRX 10290
Copied
Traxxas 10290 - High-Intensity Maxx Slash LED Light Kit QUICK FEATURES ON MAXX SLASH LED LIGHT KIT (10290): ­Compatible with Velineon VXL-6s ESC Fully functioning brake lights that work in both forward and reverse direction Fully waterproof Three default lighting modes controlled from the power amplifier Low and high beam brightness settings Easy to install with simplified, concealed, color-coded wiring Includes front and rear bumpers with LED cutouts Firmware updatable through the app App-controlled lighting functions:* - Turn lights on/off remotely - Build a custom dashboard - Customize lighting configurations and actions - Add additional lighting components Maxx Slash redefines speed, durability and toughness with its innovative design and massively overbuilt chassis. Only Traxxas could design an LED light kit worthy of the Maxx Slash's extreme performance. Built to handle brutal real-world punishment, this light kit is waterproof and built Traxxas Tough™ for maximum fun. Blaze a path through the night with this intense-white high-output LED light kit. Traxxas innovation delivers features and performance not found on any other lighting system. The included high voltage amplifier packs the muscle to efficiently power the high-power light bar, while minimizing losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. The smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common and annoying problem with generic aftermarket systems that turn on the brake lights while reversing. ­ MAXX SLASH LED LIGHT KIT (10290) INCLUDES: High-output front LED light bar Multi-function rear LED light bar Replacement bumpers with LED cutouts High-voltage 8-channel power amplifier for intense, brilliant LED lighting Regulated output for stable lighting performance (no flickering or dimming as the battery voltage changes) Mounting hardware

1.249,-

1.349,-

KJØP
-7%
Art.nr: TRX 10295
Copied
Traxxas 10295 - Maxx® Slash® Swaybar Set Sway bar kit, Maxx Slash® (front and rear) (includes front and rear sway bars and linkage) Sway bars are a powerful tool to change up the handling of your Maxx® Slash®. Sway bars allow you to dial in more or less understeer depending on the type of terrain and the level of grip available. The Maxx Slash sway bar kit includes front and rear sway bars with different levels of stiffness and all the necessary installation hardware. Accessory part for these models: Maxx® Slash®

469,-

489,-

KJØP
-4%
Viser 101 til 125 (av 5155 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png