Hopp til innhold

Yeah-Racing

Populært i denne kategorien

 
Art.nr: WL-0171SV
Copied
Description: Aluminum rims for your retro kyosho buggy, aluminum rims giving you more durability when landing harsh jumps!     Feature:   For: Kyosho Optima / Optima Mid / Javelin / ULTIMA Material: Aluminum Color: Silver   Specification:   Outer Diameter : 54mm Width : 34.5mm Hex : 12mm Weight : 31g / pc   Include:   Aluminum Rims (4 pcs)

699,-

749,-

KJØP
-7%
Art.nr: BBG-0050BU
Copied
Yeah Racing Aluminum Big Bore Go 50mm Damper Set 4pcs for 1/10 RC Touring Car Blue Description: Big Bore Go! Purchase this set of big bore shocks, add oil and off you go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine tune your ride so you don't have to go looking for different springs after purchasing our set of shocks! If you really want to get serious with tuning, there are different holes of pistons included so you can adjust the how the shock reacts to the shock oil. Feature: For: RC Car Material: Aluminum Include: Aluminum Big Bore Go Dampers (4 pcs) Springs (12 pcs) Pillow Balls (8 pcs) Ballstuds (8 pcs) Threaded Ballstuds (8 pcs) Pistons (8 pcs)

469,-

499,-

KJØP
-6%
Art.nr: BBG-0070BK
Copied
Yeah Racing Aluminum Big Bore Go 70mm Damper Set 2pcs for 1/10 RC Offroad Buggy Black Description: Big Bore Go! Purchase this set of big-bore shocks, add oil, and off you go! Includes two different types of mounting pillow ball studs for different types of cars! Included are different springs for you to fine-tune your ride so you don't have to go looking for different springs after purchasing our set of shocks! If you really want to get serious with tuning, there are different holes of pistons included so you can adjust how the shock reacts to the shock oil. *Photos for reference only. Feature: For: RC Car Material: Aluminum Include: Aluminum Big Bore Go Dampers (2 pcs) Soft Springs - Red (2 pcs) Medium Springs - Yellow (2 pcs) Hard Springs - Blue (2 pcs) Pillow Balls (4 pcs) Ballstuds (4 pcs) Threaded Ballstuds (4 pcs) Pistons (4 pcs)

319,-

349,-

KJØP
-9%
Art.nr: RSS3-003OR
Copied
BALL BEARING ALUMINUM C-HUB SET FOR HPI RS4 SPORT3 ORANGE Description: Direct replacement for your plastic C Hub on the HPI RS4 Sport 3, made of aluminum which will make your suspension system more efficicent. Gone is the traditional bushing system and in it's place is are bearings to make for a smoother steering system! Etched markings of caster angle and left right for easy distinguishing from your other parts!   Feature:   For: HPI RS4 Sport3 Material: Aluminum Color: Orange   Include:   Ball Bearing Aluminum C-Hub (2 pcs) Bearings (4 pcs) Mounting Hardware (1 pack)   *Photos for reference only.

199,-

KJØP
Art.nr: MG-64041-046
Copied
Yeah Racing Pinion Gear Super Hard Combo set (64P 41T-46T 6pcs ) Description: The motor gear series including 2 major types of Pitch Pinion - the 48 Pitch Pinion and the 64 Pitch Pinion. The 48 Pitch Pinion available from 15 teeth to 38 teeth. The 64 Pitch Pinion available from 17 teeth to 52 teeth. The Yeah Racing Aluminum Motor Gear are made by 7075 high quality aluminum with titanium coated surface. Feature: For: 1:10 EP, fit on 540 Motor Material: 7075 Aluminum Color: Titanium Specification: Pitch: 64 Teeth: 41~46 Include: 64 Pitch Pinion 41 Teeth (1 Pc) 64 Pitch Pinion 42 Teeth (1 Pc) 64 Pitch Pinion 43 Teeth (1 Pc) 64 Pitch Pinion 44 Teeth (1 Pc) 64 Pitch Pinion 45 Teeth (1 Pc) 64 Pitch Pinion 46 Teeth (1 Pc) Set Screw (6 pcs)

279,-

299,-

KJØP
-7%
Art.nr: TACC-042
Copied
Metal Rear Bumper For Tamiya CC-02 Mercedes-Benz G500   Description: Rear bumper for protecting the rear of your chassis when trailing and accidents happen! Mounted on the chassis for highest amount of rigidity!   Feature:   For: Tamiya CC02 Material: Metal Color: Black   Include:   Rear Bumper (1 pc) Screws (1 pack)

369,-

399,-

KJØP
-8%
Art.nr: TACC-S01BU
Copied
Yeah Racing Aluminum Essential Conversion Kit For Tamiya CC01 Blue Description: Aluminum upgrade kit which converts the Essential Load Bearing parts to aluminum! Featuring is our bearing supported four-link pivot which allows for un-hindered flex and reduces binding from the links! A redesigned steering rack that uses bearings provides smoother operation and more precise steering input! Aluminum suspension components for the front gives you more stability on the trails! *Photos for reference only. Feature: For: Tamiya CC-01 (Short and Medium Wheelbase: 242 and 252mm) Material: Aluminum Color: Blue Include: TACC-001BU Aluminum Bearing Supported Steering Rack For Tamiya CC01 (Blue) (1 pc) TACC-002BU Aluminum Front Lower Suspension Arm For Tamiya CC01 (Blue) (1 pc) TACC-003BU Aluminum Rear Four Link Conversion For Tamiya CC01 (Blue) (1 pc) TACC-005BU Aluminum 7075 & Steel Universal Shaft For Tamiya CC01 (Black) (1 pc) TACC-008BU Aluminum C Hub For Tamiya CC01 (Blue) (1 pc) TACC-009BU Aluminum Steering Knuckle For Tamiya CC01 (Blue) (1 pc)

1.349,-

1.399,-

KJØP
-4%
Art.nr: TATT-S01BU
Copied
Yeah Racing  TATT-S01BU Aluminum Essential Conversion Kit For Tamiya TT02B Description: Introducing the Yeah Racing Aluminum Conversion Kit For Tamiya's TT02B, this kit consists everything you need to upgrade your TT02B to unleash its full potential as the ultimate racing buggy or backyard basher! On the stock Tamiya TT02B there are an extensive amount of plastic parts, which consists a lot of play in the suspension. This creates inconsistency in the suspension geometry and will make your car hard to drive, especially on offroad surfaces where your suspension will work twice as hard when compared to on road. By upgrading your TT02B with this upgrade it, it unleashes it's full potential. Yeah Racing exquisitely use the premium quality of material coupled with precise CNC cutting to manufacture all the parts in the conversion kit. The result is astonishing performance and durability upgrade due to the minimum friction and flex within the car's suspension system as a result. This is the ultimate upgrade kit for people who are sick of seeing original plastic parts breaking over and over.   Feature:   For: Tamiya TT02B TT02BR Material: Aluminum Color: Blue Meticulous Design Resulting in Minimized Friction Premium Materials Built To Last Precise CNC manufacturing process for the Perfect Fit   Include:   Yeah Racing Aluminum Front Lower Arm Set For Tamiya TT02B #TATT-001BU Yeah Racing Aluminum Rear Lower Arm Set For Tamiya TT02B #TATT-002BU Yeah Racing Aluminum Ball Bearing C-Hub Set For Tamiya TT02B #TATT-003BU Yeah Racing Aluminum Front Knuckle Arm Set For Tamiya TT02B #TATT-004BU Yeah Racing Aluminum Rear Hub/Knuckle Arm 3 Degree For Tamiya TT02B #TATT-005BU Yeah Racing Aluminum Front Damper Stay For Tamiya TT02B #TATT-006BU Yeah Racing Aluminum Rear Damper Stay For Tamiya TT02B #TATT-007BU

1.495,-

1.595,-

KJØP
-6%
Art.nr: TT02-017
Copied
Description: This is the Yeah Racing Steel Front/Rear Gear Box Joint for Tamiya TT02. Great upgrade from the stock plastic part or could be used as a replacement of the broken parts. Yeah racing carefully crafted this item with high grade of material for maximum durability. Less room for flexing compare to the standard parts and therefore smoother acc/deceleration can be achieved. Additionally more power from the motor could be directly deliver to the wheels.   Feature:   For: Tamiya TT02 Material: Steel Color: Black   Include:   Gear Joint (1 pair) Manual (1 pc)

119,-

139,-

KJØP
-14%
Art.nr: WPT-0032
Copied
Yeah Racing  WPT-0032 16AWG Silver Silicone Wire Set (BK/BU/RD) Assorted Packing - Colors - Black / Blue / Red Wire Length - 60 cm each x 3 colors Nominal Voltage: 300V or 600V. (It is well-suited for Radio Control Cars which require the standard of 0.1 - 24V.) Temperatyre Range: -60℃~200℃ Outer Diameter Tolerance: +/-0.1mm Test Voltage: 2000v Conductor: Tinned Copper Insulator: Silicone

59,-

KJØP
Art.nr: YA-0653RD
Copied
Aluminum heatsink with a offset center position which allows for more flexibility with wiring and not getting into way other things as well.   Feature:   For: 540 / 550 Motors Material: Aluminum Fan: YA-0180 30mm Tornado Fan Color: Red   Include:   Heatsink (1 pc) Mounting plates (2 pcs) Fan (1 pc) Mounting Hardware (1 pack)

139,-

KJØP
Art.nr: DSG-0055BU
Copied
Yeah Racing Shock-Gear 55mm Damper Set for 1/10 RC Touring Car Blue   Description: This is a Yeah Racing newly designed damper set for 1/10 RC cars. Despite the 5 stage stiffness spring sets, Yeah racing damper set featured the state of the art technology interchangeable damper piston which gives so much serious tuner so much potential to tune their damper settings. The interchangeable piston will allow 3 settings of damper's response as well as 4 rebound rate adjustment to fit different racing situation and maximum performance. The Yeah Racing new damper set has spent great effort on increasing the durability and maintenance ease. The damper shaft is coated with titanium for extra reducing friction and longer lifespan. To cope with the need to change the damper piston from time to time, the shock gear have selected premium quality anti-leak O-Ring to keep the damper oil in place. CNC machined high grade aluminum were used to build this high end damper set for maximum durability at the minimum weight. Rebound Core System: The Yeah Racing Aluminum damper set comes with 6 different damper piston for fine-tuning the rebound characteristics. The set of 3 general type piston allow you to adjust 3 different rebound rate where has the same depression and compression resistant. While the "V piston" featured a v shape damper oil tunnel which allows the compression rate differ from the compression rate for more precise tuning. For instance, a rear wheel drive RC can be benefit by a stiffer rear wheel compression rate to offset the weight transfer during hard acceleration while maintaining balanced depression rate throughout the whole car.   Feature: For: 1/10 RC Cars Material: Aluminum Color: Blue CNC Machined Titanium Coated Damper Shafts Selected Anti-Leak O-Ring Unique Piston Design Rebound Core System Aluminum Damper Cylinder Easy To Refill Damper Oil Simple Installation   Include: Shcok-Gear (4 pcs) Piston 2 Holes (4 pcs) Piston 3 Holes (4 pcs) Piston 4 Holes (4 pcs) V Piston 2 Holes (4 pcs) V Piston 3 Holes (4 pcs) V Piston 4 Holes (4 pcs) Spring (Super Soft) (4 pcs) Spring (Soft) (4 pcs) Spring (Medium) (4 pcs) Spring (Hard) (4 pcs) Spring (Super Hard) (4 pcs) Ball End (8 pcs) Ball Nut (4 pcs) Shock Oil 300CST 15ml (1 pc) Manual (1 pc)     Manual:      

399,-

429,-

KJØP
-7%
Art.nr: AXSC-S01
Copied
Include: Yeah Racing (#AXSC-005) Brass C-Hub 2 pcs For Axial SCX10 II (1 pc) Yeah Racing (#AXSC-006) Brass Diff Cover For Axial SCX10 II (2 pcs) Yeah Racing (#AXSC-007) Brass Rear Axle Lock-Out 2pcs For Axial SCX10 II (1 pc) Yeah Racing (#AXSC-008) Brass Knuckle Arm 2pcs For AXIAL SCX10 II (1 pc) Yeah Racing Brass Upgrade Parts Set For Axial SCX10 II Description: Brass upgrade combo for your Axial SCX10 II, upgrade to these parts to get more grip out of your tires! Brass also means sturdier than the original plastic parts. Comes with all required mounting hardware required to install this combo onto your truck!   Feature: For: Axial SCX10 II Material: Brass Color: Brass Include: Yeah Racing (#AXSC-005) Brass C-Hub 2 pcs For Axial SCX10 II (1 pc) Yeah Racing (#AXSC-006) Brass Diff Cover For Axial SCX10 II (2 pcs) Yeah Racing (#AXSC-007) Brass Rear Axle Lock-Out 2pcs For Axial SCX10 II (1 pc) Yeah Racing (#AXSC-008) Brass Knuckle Arm 2pcs For AXIAL SCX10 II (1 pc)

1.599,-

KJØP
Art.nr: WL-0108
Copied
Description: Yeah Racing Spec-T Tire wheelsets provides both good looks and high grip for a value price! Features treaded tires which can be run in either direction which will provide different grip characteristics! The inserts prevents the tire from deforming whilst cornering even at high speeds, features a 12mm hex so a vast majority of on-road cars will be able to use this wheelset.   Feature:   For: 1/10 Onroad Material: Plastic Wheel, Rubber Tire Hex Size: 12mm   Include:   Yeah Racing Spec T Wheels w/ Tires (4 pcs)

199,-

KJØP
Art.nr: AXSC-018
Copied
Description: Add weight to the more forward position on your Axial SCX10 III! Measuring in at 77 grams, this will allow your crawler to climb obstacles easier as it shifts the center of mass towards the forward of your rig! Feature: For: Axial SCX10 III Material: Brass Color: Brass

329,-

KJØP
Art.nr: WL-0182GD
Copied
Aluminum rims for use with Tamiya's retro buggies! Higher durability at the expense of a little weight increase.   Feature:   For: Tamiya DT-02 DT-03 Super Astute Sand Rover 2011 Material: Aluminum Color: Gold   Include:   Aluminum Rims (4pcs)

699,-

749,-

KJØP
-7%
Art.nr: AXSC-019
Copied
Description: Brass Hex adaptors for Axial's SCX10 III and Capra! Add a tiny weight to get more grip from your tires. Feature: For: Axial SCX10 III and Capra Material: Brass Color: Brass Include Brass Hex Adaptors (4 pcs)

119,-

KJØP
Art.nr: TRX4-032BK
Copied
Aluminum Alloy Front Bumper w/LED Light For Traxxas TRX-4 Axial SCX10 / II Black   NB! NB! Denne passer ikke med Traxxas sin winch TRX 8855   Description: This is a new series of machined aluminum chassis mounted bumpers for SCX10, SCX10 II and Traxxas's TRX-4 from Yeah Racing, protect your chassis when you flip over as the bumper is pointed outwards. This product will fulfill your need for ever more realistic accessories with more scaled accessories. The Bumper features mounting points for winches and dual tow points with shackles included. This bumper mounts onto the frame, so it will for sure fit all SCX10 chassis's and TRX-4.       *Photos for reference only.   Feature: For: Traxxas TRX-4 Defender / Bronco / Axial SCX10 / II HPI Venture/Gmade Bom/Redcat Gen8 Material: Aluminum Alloy Color: Black   Include: Yeah Racing Alloy Front Bumper (1 pc) Mounting Post (2 pcs) LED Cable (1 pc)

439,-

489,-

KJØP
-10%
Art.nr: TRX4-047BK
Copied
Alloy Diff Cover (Titanium Coated) For Traxxas TRX-4 Black   Description: Alloy diff cover with titanium coating for Traxxas's TRX-4. Perfect match with the alloy axles which are also titanium coated by yeah racing.     *Photos for reference only.   Feature: For: Traxxas TRX-4 Material: Alloy Color: Black   Include: Alloy Diff Cover (1 pc)

149,-

KJØP
Art.nr: YT-0196
Copied
Yeah Racing 1.1-2.0mm Steel Twist Drill 10 in 1 Set w/ Aluminum Handle Description: Drill bits for installing into a handheld drill or a dremel for use to either modify shock pistons or places where small holes are needed! Color coded with corresponding sizes for easy management. Comes with 10pcs, increasing in 0.1mm increments ranging from 1.1 to 2mm. *Photos for reference only. Feature: Color: Silver/Black Aluminum Handle Material: Steel/Aluminum Handle Include: Steel Twist Drill Bits (10 pcs) Aluminum Handle (1 pc)

169,-

199,-

Ikke på lager
-15%
Art.nr: YA-0370BK
Copied
Yeah Racing 1/10 Aluminum Roof 5 White LED Light Set Black For RC Truck Crawler Description: This is the Yeah Racing 1/10 Aluminum Roof 5 White LED Light Set Black For RC Truck Crawler #YA-0370BK. With this set of LED lights, you will bring your crawler into the dark and have a show down at night! With adjustable mount, you can adjust the angle of the lights to which degree it pleases you. Metallic Black color aluminum outer case makes it durable for wear and tear, also adding coolness to your crawler with style.   *Photos for reference only. Feature: For: RC Truck Crawler Material: Aluminum Color: Black Adjustable LED Bucket Angle Lenght: 127mm Bucket Diameter: 23mm LED Diameter: 5mm Include: 1/10 Aluminum Roof 5 White LED Light Set Black (1 set)

279,-

299,-

KJØP
-7%
Art.nr: YA-0370RD
Copied
1/10 Aluminum Roof 5 White LED Light Set Red For RC Truck Crawler Description: This is the Yeah Racing 1/10 Aluminum Roof 5 White LED Light Set Red For RC Truck Crawler #YA-0370RD. With this set of LED lights, you will bring your crawler into the dark and have a show down at night! With adjustable mount, you can adjust the angle of the lights to which degree it pleases you. Metallic red color aluminum outer case makes it durable for wear and tear, also adding coolness to your crawler with style.   Feature:   For: RC Truck Crawler Material: Aluminum Color: Red Adjustable LED Bucket Angle Total Lenght: 127mm Screw Hole to Hole : 123mm Bucket Diameter: 23mm LED Diameter: 5mm   Include:   Yeah Racing 1/10 Aluminum Roof 5 White LED Light Set (1 set)

279,-

299,-

KJØP
-7%
Art.nr: YA-0507BK
Copied
Yeah Racing 1/10 Aluminum White LED Light Bar Black for Crawler 'G6 Certified' Description: Ultra bright 18 LED light bar for your custom crawler project! Comes with mounting bracket to mount this light bar to your body/bumper with four screws! Power cable comes attached with both JST and Yeah Racing's Dark Drifter LED Main unit plug for you to choose from. Feature: For: Offroad R/C Material: Aluminum Light bar Width: 145mm Color: Black Led : White Voltage : 7.2V Include: LED Light Bar (1 pc) LED Light Bar Mount (1 pc) Screws (6 pcs)

219,-

KJØP
Art.nr: YA-0567RD
Copied
Yeah Racing 1/10 Aluminum White Super Bright LED Light Bar Red w/Two Set Mount for 1/10 RC Truck Crawler Description: Aluminum frame LED lightbar with mounts to install on crawler body or on your bumper! The bumper mount is a simple triangle screw mount which you could also DIY to fit onto your body as you see fit! Accepts a wide input voltage from 7.2v all the way to 12v! *Photos for reference only. Feature: For: 1/10 RC Truck Crawler Bodies Material: Aluminum Color: Red Voltage:7V to 12V Include: 159mm LED Light bar (1 pc) 165mm LED Light bar(Mount to Mount) (1 pc) Jeep Body Mount (2 pcs) DIY Triangle Mount (2 pcs) Mounting Hardware (1 pack)  

349,-

399,-

KJØP
-13%
Art.nr: YA-0449
Copied
Yeah Racing 1/10 RC Rock Crawler Accessory Height Adjustable 3 Ton Jack Black 2pcs Description: This Yeah Racing 1/10 RC Rock Crawler Accessory Height Adjustable 6 Ton Pack comes in pairs, featuring realistic look and similar functions like the real thing! They can support and hold most cars and trucks safetly off the ground, prefect for RC repair work or storage. It is made of metal, portable and tough, making these heavy duty jack stands the perfect addition to your RC garage or auto shop. *Photos for reference only. Feature: For: 1/10 RC Material: Steel Color: Black Specification: Height: 80 - 100mm Weight: 100g each Include: Height adjustable 6 Ton Jack (2 pcs)

279,-

299,-

KJØP
-7%
Viser 1 til 25 (av 347 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png