Hopp til innhold

Slash 2WD 2,4 ghz

 
Art.nr: TRX 2923X
Copied
This is the Traxxas 7-Cell 8.4V 3000mAh iD Power Cell NiMH Stick Battery Pack FEATURES New high current connector with gold-plated copper terminals  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings  MAXX cable high-efficiency 12 gauge silicone jacketed wire  Sub C size cells INCLUDES One 7-cell 8.4V 3000mAh iD Power Cell NiMH Stick Pack with High-  Current Connector REQUIREMENTS Peak-detection charger SPECIFICATIONS  Length: 155mm (6.10")  Width: 44mm (1.7")  Height: 23mm (0.91")  Weight: 380g (13.4oz)

499,-

519,-

På lager 1
KJØP
-4%
Art.nr: TRX 1951
Copied
This is a set of telescoping drive shafts. Includes:  2 black nylon telescoping shaft (each shaft is made of two pieces)            4 aluminum U-joints

59,-

69,-

På lager 1
KJØP
-14%
Art.nr: TRX 5116
Copied
Disse lagerene er samme størrelse som Tamiya 1150 This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X11mm ball bearings, Part #5116 SPECS:    Inside diameter:      3/16"      (5mm)           Outside diameter:     7/16"     (11mm)           Width:                5/32"      (4mm)

49,-

55,-

På lager 11
KJØP
-11%
Art.nr: TRX 1654
Copied
Wheel hubs, hex (2)/ stub axle pins (4)

35,-

På lager 7
KJØP
Art.nr: TRX 1953
Copied
This is a set of the Traxxas telescoping drive shafts (equivalent of dogbones or swing shafts). These are for use on Traxxas trucks. Features: White plastic parts Includes:          (6) sets of drive shafts  (each set consists of an inside shaft wich              slides in the outside shaft). Dimensions: 2.5" long when fully compressed.

119,-

På lager 4
KJØP
Art.nr: TRX 2542
Copied
 These are the Traxxas Countersunk 4 x 12mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 4 x 12mm Countersunk Flathead Hex Screws REQUIRES: Installation on the vehicle

35,-

På lager 3
KJØP
Art.nr: TRX 1965
Copied
This is a replacement Piston head set for most Traxxas vehicles including the Sledge, Bullet, Rad, N.Street, N.Hawk, N.Buggy, Blue Eagle,LS,LSII, and TRX-1. Includes: 2- plastic Lower spring retainers 2- plastic Upper spring clamps 2 each - plastic 1 hole pistons, 2 hole pistons, and 3 hole pistons 2- 2.5mm x 9mm machine screw used in spring clamp.    

35,-

På lager 2
KJØP
Art.nr: TRX 2552
Copied
This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x12mm countersunk screw is required INCLUDES: Six 3x12mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  12mm           Diameter: 3mm

35,-

På lager 1
KJØP
Art.nr: TRX 2575
Copied
This is a package of six 3x6mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x6mm button head screw is required INCLUDES: Six 3x6mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:   6mm           Diameter: 3mm

35,-

På lager 7
KJØP
Art.nr: TRX 2263
Copied
Y-harness, BEC to LED light set

59,-

På lager 1
KJØP
Art.nr: TRX 2576
Copied
These are Traxxas 3x8mm Button Head Screws. FEATURES: Black steel construction with hex head INCLUDES: Six screws REQUIRES: 2mm hex wrench.

35,-

På lager 5
KJØP
Art.nr: TRX 2362
Copied
This is a shock rebuild kit for 2 Traxxas black plastic shocks.  Includes: 4 E-clips   2 C-clips   2 O-rings   8 Washers   2 Diaphrams

35,-

På lager 2
KJØP
Art.nr: TRX 2577
Copied
This is a Package of Six 3mm x 10mm Button Head Screws. FEATURES: Metal Construction           Black in Color           Button Head Type           Machine Thread INCLUDES: Six 3mm x 10mm Button Head Machine Thread Screws REQUIRES: Nothing.

35,-

På lager 3
KJØP
Art.nr: TRX 2381X
Copied
This is the Main Diff with Steel Ring Gear from Traxxas               for the Bandit, Stampede and Rustler VXL series. Includes:  Main diff with steel ring gear            Side cover plate            Screws            Instructions Requires:  Installation on the vehicle

75,-

På lager 4
KJØP
Art.nr: TRX 2578
Copied
These are 3x12mm Button Head Screws from Traxxas FEATURES: Steel Construction           Black in color           Hex head INCLUDES: Six button head screws SPECS:    Length:  12mm (.47")           Diameter: 3mm (.12") COMMENTS: These can be use with various application.

35,-

På lager 4
KJØP
Art.nr: TRX 2382
Copied
These are the replacement planetary gear and shafts. FEATURES:  All these gears and shafts are made of metal(probably with a low            amount of steel). INCLUDES:  4- planetary gears            4- planteary gear shafts            2- sun gears            1- sun gear alignment shaft

75,-

På lager 2
KJØP
Art.nr: TRX 2579
Copied
This is a package of six 3x15mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x15mm button head screw is required INCLUDES: Six 3x15mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench. SPECS:    Length:  15mm           Diameter: 3mm

35,-

På lager 4
KJØP
Art.nr: TRX 2388X
Copied
This is the Complete Planetary Gear Differential With Steel Ring Gear                 for the Traxxas Bandit, Stampede and Rustler. FEATURES: Metal gear shafts           Metal and plastic main differential INCLUDES: Main differential with steel ring gear           Planetary gears and shafts           Sun gears and shafts           Silicone  grease REQUIRES: Installation on the vehicle COMMENTS: For main differential w/ steel ring - TRX 2381X                     Planet gear shafts - TRX 2382                     Silicon grease  - TRX 1647

179,-

189,-

På lager 3
KJØP
-5%
Art.nr: TRX 2580
Copied
This is a package of six 3x20mm Traxxas Button Head Screws. FEATURES: Steel construction, Black in color           Used on the Traxxas Revo monster truck, can also be used in any             application where a 3x20mm button head screw is required INCLUDES: Six 3x20mm Traxxas Button Head Screws REQUIRES: 2mm hex head wrench

35,-

På lager 4
KJØP
Art.nr: TRX 2416
Copied
This is the 16 Tooth 48 Pitch Pinion Gear from Traxxas. FEATURES: Steel construction INCLUDES: 16 Tooth 48 Pitch Pinion Gear with set screw REQUIRES: Installing on motor shaft SPECS:    Number of Teeth: 16T           Pitch: 48           Inner Diameter: 0.12" (3mm)

49,-

59,-

Ikke på lager
Ikke på lager
-17%
Art.nr: TRX 2582
Copied
This is a 6 pack of 3X30mm Button Head Screws. FEATURES: Steel construction           Black in color           Button head design INCLUDES: (6) 3X30mm button head screws SPECS:    Length:    1-3/16" (30mm)           Diameter:     1/8"  (3mm)

35,-

På lager 1
KJØP
Art.nr: TRX 2583
Copied
These are the Button Head 3mm x 18mm Screws               for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction           Black in color INCLUDES: Six 3mm x 18mm Button Head Screws REQUIRES: Assembly onto Vehicle

35,-

På lager 4
KJØP
Art.nr: TRX 2586
Copied
This is a Package of Six 3x15mm Cap Head Machine Screws for the 2.5 Engine.   FEATURES Black steel construction   INCLUDES Six 3x15mm cap head machine screws

35,-

På lager 4
KJØP
Art.nr: TRX 2591
Copied
These are the Traxxas Button-Head 3 x 23mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 3 x 23mm Button-head Hex Screws REQUIRES: Installation on the vehicle

35,-

På lager 1
KJØP
Art.nr: TRX 2592
Copied
These are the Traxxas Button-Head 3 x 40mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 3 x 40mm button-head hex machine screws REQUIRES: Installation on the vehicle

39,-

På lager 4
KJØP
Art.nr: TRX 2743
Copied
These are 3mm Grub Screws from Traxxas. FEATURES: Hardened steel construction.           Hexagon socket drive insert. INCLUDES: (12) Grub Screws SPECS:    Size:  3mm  

39,-

På lager 4
KJØP
Art.nr: TRX 2545
Copied
Bellcrank bushings (plastic) (5x8x2.5mm) (4)

39,-

På lager 2
KJØP
Art.nr: TRX 2745
Copied
These are 3mm Nylon Locking Nuts from Traxxas. FEATURES: Durable metal construction           Nylon inserts INCLUDES: (12) Lock Nuts SPECS:    Size:  3mm

29,-

39,-

På lager 4
KJØP
-26%
Art.nr: TRX 2746
Copied
These are 3x6mm Washers from Traxxas. FEATURES: Metal construction INCLUDES: (12) Washers SPECS:    Size:  3x6mm

25,-

30,-

På lager 7
KJØP
-17%
Art.nr: TRX 2754
Copied
These pins slide through the axle and hold the wheel to the axle. INCLUDES:  4- stub axle pins

15,-

På lager 10
KJØP
Art.nr: TRX 3642X
Copied
These are the Shoulder Screws for the Traxxas T-Maxx 3.3. FEATURES: Black steel construction INCLUDES: Six steel shoulder screws SPECS:    Length: 12mm           Diameter: 3mm    

39,-

På lager 4
KJØP
Art.nr: TRX 3644
Copied
These are the 39mm Turnbuckle Camber Links                 for the Traxxas Stampede and Rustler VXL. FEATURES: Metal and Nylon Construction           Silver and Black in Color           Assembled w/Rod Ends INCLUDES: Two front 39mm (69mm center to center) turnbuckles and instruction             sheet REQUIRES: Installation on the vehicle

79,-

På lager 3
KJØP
Art.nr: TRX 3646
Copied
These are the Traxxas Flat-Head 3 x 15mm Machine Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 3 x 15mm Flathead Hex Machine Screws REQUIRES: Installation on the vehicle

35,-

På lager 1
KJØP
Art.nr: TRX 3647
Copied
This is the Traxxas Flanged Nylon Locking Nuts. FEATURES: Steel serrated construction INCLUDES: Eiqht 4mm flanged nylon locking nuts SPECS:    Outside diameter: 7mm

39,-

På lager 8
KJØP
Art.nr: TRX 3760A
Copied
Denne passer til: -Bandit XL5/VXL foran. -Rustler XL5/VXL foran. -og til flere Traxxas biler. Sjekk manualen til din bil. This is a pair of the Long Ultra Shocks from Traxxas                       for the Bandit. FEATURES: Gray composite bodies           Preload spacers and two red springs INCLUDES: Two ultra long grey shocks with bottle of silicone             oil and assembly diagram REQUIRES: Assembly COMMENTS: Two pairs are required if replacing all shocks.  

259,-

289,-

På lager 2
KJØP
-10%
Art.nr: TRX 3934
Copied
Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction           Natural polished color INCLUDES: Twelve Body Clips SPECS:    Length: 26mm

39,-

På lager 5
KJØP
Art.nr: TRX 3935
Copied
  These are the replacement Body Clips for                     the Traxxas Nitro Revo Monster Truck. FEATURES: Metal Construction           Silver in Color           Bent for Easy Removal INCLUDES: Ten Bent Silver Metal Body Clips REQUIRES: Assembly onto Vehicle

39,-

På lager 10
KJØP
Art.nr: TRX 2734
Copied
This is a package of cable ties.     FEATURES Easily holds wires in place & other small items INCLUDES 10 Black cable ties SPECIFICATIONS 3 1/16" long (76mm)  3/32" wide (2.5mm)

25,-

På lager 1
KJØP
Art.nr: TRX 3937
Copied
This is a Traxxas 4X12mm Button Head Screw Set. FEATURES: Steel construction           Black in color           Low-profile, button-head design           Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS:    Overall Length:  12mm (.63")           Threaded Length: 11mm (.45")           Thread Size:     M4x.7mm coarse           Hex Wrench Size  2.5mm COMMENTS: Used on the Revo to mount the transmission skid plate.

35,-

På lager 4
KJØP
Art.nr: TRX 3965
Copied
This is a 6 pack of Traxxas 2.5X8mm Cap Head Screws. FEATURES: Steel construction           Black in color           Cap head design INCLUDES: (6) 2.5X8mm cap head screws SPECS:    Length:         5/16"   (8mm)           Diameter:       3/32"   (2.5mm

35,-

På lager 15
KJØP
Art.nr: TRX 2753X
Copied
These are the Rear Stub Axles                  for the Traxxas Bandit, Stampede 2WD and Rustler. FEATURES: Metal construction, black and silver in color INCLUDES: Two rear stub axles and pins SPECS:    Length: 1.65" (42mm)           Diameter: .51" (13mm) at largest point

59,-

79,-

På lager 1
KJØP
-25%
Art.nr: TRX 4859
Copied
Screws, 3x10mm flat-head machine (hex drive) (4)

25,-

På lager 5
KJØP
Art.nr: TRX 5347
Copied
Denne finnes også i RPM her.   This is the Large Rod End Set for the Traxxas Revo. FEATURES: Plastic construction           Black in color           Metal Pivot Balls INCLUDES: 12 Rod Ends           12 Pivot Balls REQUIRES: Assembly to vehicle SPECS:    Length:              22mm (.88")           Width at ball joint: 10mm (.39")

119,-

På lager 2
KJØP
Art.nr: TRX 5525
Copied
These are the Rod Ends and Balls for the Traxxas Slash 4x4 and other Traxxas cars. FEATURES: Black nylon construction.           Steel hollow balls. INCLUDES: Twelve rod end/balls REQUIRES: Installing on Jato SPECS:   Length: 1-1/8" (28mm)          Width: 3/8" (9mm)  

119,-

129,-

På lager 4
KJØP
-8%
Art.nr: TRX 3195
Copied
This is the 22 tooth, hardened steel top drive gear. Fits: Traxxas Rustler VXL/XL-5 Stampede VXL/XL-5 Bandit VXL/XL-5 1/10 Slash 2WD

39,-

Ikke på lager
Ikke på lager
Art.nr: TRX 5526
Copied
This is the Traxxas Antenna Crimp Nut. FEATURES: Anodized Blue Aluminum crimp nut INCLUDES: One crimping nut           Nylon wrench    

49,-

På lager 3
KJØP
Art.nr: TRX 5624
Copied
Box, receiver (sealed)/ foam pad/ silicone grease/ 3x8mm BCS (2)/ 2.5x8mm CS (2)/ 3x6mm BCS (2) Waterproof receiver box includes foam pad, silicone grease, 3x8 mm screws (2), 2.5x8 mm screws (2), and 3x6 mm screws (2).

149,-

På lager 2
KJØP
Art.nr: TRX 5625
Copied
       This is the Receiver Box Seal Kit for the Traxxas Slash                             and E-Revo FEATURES: Prevents moisture and dirt from entering receiver box INCLUDES: Silicone rectangle shaped O-ring           Silicone grease           Two sections of foam rubber           Instruction sheet REQUIRES: Installing between receiver box sections

49,-

På lager 1
KJØP
Art.nr: TRX 5827
Copied
This is the Hold Down Battery Set for the 2WD Traxxas Slash. FEATURES: Black nylon construction INCLUDES: One Battery Hold Down           One Retainer Hold Down           One Battery Post           One Foam Spacer           One Angled Body Clip REQUIRES: Installation on the chassis

79,-

89,-

På lager 1
KJØP
-11%
Art.nr: TRX 3631
Copied
This is the Traxxas replacement #3631 Front Suspension Arms for for the Stampede and Rustler. FEATURES:    Made from black molded nylon    For the Traxxas Stampede and Rustler. SPECS:    Length: 3 1/4"    Thickness: 3/8"    Width at end near chassis: 1 1/2"    Width at end near wheels: 7/8" INCLUDES:    (2) Front suspension arms for the Traxxas Stampede.

99,-

På lager 3
KJØP
Viser 51 til 100 (av 140 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png