Hopp til innhold

Bandit XL-5

Populært i denne kategorien

 
Art.nr: TRX 3636
Copied
Traxxas Bandit.  They are made of black reinforced nylon and are what the front axles go through. Steering blocks, left & right (2) (requires 5x11x4mm bearings) PACKAGE INCLUDES:  Two steering blocks (one left and one right)

39,-

KJØP
Art.nr: TRX 3642
Copied
This is a Package of 3x12x5mm Shoulder Screws for many                           Traxxas Vehicles. FEATURES: Black steel construction           Screws are half-threaded/half-smooth           Phillips head INCLUDES: Six 3x12x5mm shoulder screws SPECS:    Length: 12mm (.47")           Diameter: 3mm (.12")           Thread Length: 5mm (.20")

39,-

Ikke på lager
Art.nr: TRX 3652
Copied
This is the Traxxas #3652 Stub Axle Carrier that comes included with                     the Rustler and Stampede trucks. FEATURES: Made of a black plastic/nylon material.           Also called the rear hub or hub carrier.           Has 2 possible mount locations for the outer hinge pin shaft. INCLUDES.  2  Stub alxe carriers. COMMENTS: This holds the two 5x8mm bushings (or bearings) on the stub              axle also called the wheel shaft.

39,-

KJØP
Art.nr: TRX 3685
Copied
These are Plastic Washers from Traxxas. FEATURES: White plastic construction. INCLUDES: (6) Washers SPECS:    Size:  5x8x1mm

29,-

KJØP
Art.nr: TRX 3762A
Copied
Denne passer til: -Bandit XL5/VXL bak. -Rustler XL5/VXL bak. -og til flere Traxxas biler. Sjekk manualen til din bil.   This is a pair of the Ultra Shocks for the Traxxas Bandit, Rustler, Stampede 2WD, E-Maxx, T-Maxx and Slash 2WD. FEATURES: Gray composite bodies           Stock replacement unassembled shocks           Preload spacers and two red springs INCLUDES: Two Ultra Shocks for the Traxxas Cars with bottle of silicone             oil and assembly diagram REQUIRES: Assembly COMMENTS: Two pairs are required if replacing all shocks.

219,-

KJØP
Art.nr: TRX 3765A
Copied
These are the Long Shock Bodies for the Traxxas Ultra Shocks. FEATURES Molded Composite Gray in Color INCLUDES Two ultra shock bodies (long) REQUIREMENTS Installation SPECIFICATIONS Length: 1.45" (37mm) Diameter: .51" (13mm)

39,-

KJØP
Art.nr: TRX 3766A
Copied
These are the Shock Bodies for the Traxxas Ultra Shocks  used on the Traxxas T-Maxx 3.3.   FEATURES Molded Composite  Gray in Color   INCLUDES (2) Bodies   REQUIREMENTS Installation  SPECIFICATIONS  Length: 1.777" (45.1mm)  Diameter: 0.521" (13.2mm)

39,-

KJØP
Art.nr: TRX 3767
Copied
 These are Shock Caps and Bottoms for Traxxas kits.                 These seal the shock containing the shock oil. FEATURES: Nylon construction INCLUDES: Two nylon shock cap (tops) Two nylon shock cap (bottoms) REQUIRES: Other shock components SPECS: Diameter Tops Bottoms 16MM 13MM COMMENTS: These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

39,-

KJØP
Art.nr: TRX 3768
Copied
These are the Traxxas Spring Retainers for Traxxas Shocks.        This set contains the spring retainers that hold the springs in     place over the shock body and the piston heads that control the amount                      of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic.           Contains enough parts for two shocks.           Fits the shocks on most Traxxas nitro and electric powered vehicles.           Two hole piston head for greater dampening or three hole piston head             for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with:             Two upper and two lower spring retainers             Two 2 hole piston head covers             Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

39,-

KJØP
Art.nr: TRX 3769
Copied
This is the Traxxas replacement TRX3769 Spring Pre-Load Spacers that comes with the Stampede and Rustler trucks and many others Traxxas cars along with the Black Long Shocks. and Black XX-Long shocks. FEATURES Made of a black plastic/nylon material. Used to help pre-load the shock springs. This is installed on the top of the shock springs. Enough for 1 pair of shocks. INCLUDES 2 spacers 1mm thick 2 "" 2mm "" 2 "" 3mm "" 2 "" 4mm "" , COMMENTS Looks like a letter "C" Also fits shocks with a 13.5mm outside diameter body.

59,-

KJØP
Art.nr: TRX 3775
Copied
 This is a package of bronze oilite bushings for the Traxxas Stampede and Rustler trucks.  These trucks use eight of these bushings, so there will be four left over (spares). PACKAGE INCLUDES:  Twelve 5x8mm bushings.

65,-

KJØP
Art.nr: TRX 3980
Copied
Glow Plug Wrench Universal (7/8mm) This versatile tool features a specially bent shaft that makes accessing certain nuts much easier. One end has a 8mm wrench that fits standard glow plugs and the wheel nuts. The other end has a 7mm wrench that fits the slipper clutch nut and most 4mm I/D nylon lock nuts.

29,-

KJØP
Art.nr: TRX 4363
Copied
Ball screws (3x12mm) (lower shock attachment screws) (6)

25,-

KJØP
Art.nr: TRX 4683
Copied
This is a 48P, 83T Spur Gear for models with                   Traxxas Torque Control Slipper Clutch. FEATURES: 48 pitch           83 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   83

39,-

Ikke på lager
Art.nr: BULK TRX 3018R
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** XL-5™ Waterproof FWD/REV ESC with Low Voltage Detection (LVD) Designed and engineered by Traxxas, the XL-5 Electronic Speed Control handles the elements while smoothly supplying power to the motor. This high-performance ESC is packed with impressive specifications that are normally only found on more expensive high-end replacement units. The XL-5 features a completely waterproof design, three throttle profiles, Thermal Shutdown Protection, 4-7 cell compatibility, and built-in BEC. High frequency operation combined with ultra-low resistance make the XL-5 an efficient and ultra-smooth fully proportional speed control. An exclusive feature on the XL-5 is the patented Training Mode™. This profile reduces the overall power output of the XL-5 by 50% making it easier for young or new drivers to develop their control skills before unleashing full-power operation. XL-5 is equipped with two-stage low-voltage detection (LVD) to allow LiPo battery use. The XL-5 is manufactured by Traxxas to ensure the highest level of quality and support. The XL-5 is backed by the Traxxas Lifetime Electronics Warranty. Traxxas High-Current Connector* The XL-5 ESC is equipped with the patented Traxxas high-current connectors for restriction-free current flow. Click here for more info about the patented Traxxas High-Current Connertor.     Patented Training Mode™ An exclusive feature that places the XL-5 ahead of the pack is the patented Training Mode. This feature reduces the overall power output of the XL-5 by 50% making it easier for new drivers to control their model.  When they're ready, simply change profiles to unleash full-throttle action.  Only Traxxas has it! XL-5 LVD Waterproof ESC Features Built-in two-stage low voltage detection (LVD) for Lithium Polymer (LiPo) battery use Innovative watersealed design 15-turn motor limit for 540 size motors 12-turn motor limit for 550 size motors Fully-proportional forward, reverse, and braking control Programmable with three drive profiles: Sport Mode – Fwd / Brake / Rev Race Mode – Fwd / Brake Training Mode* – 50% Fwd / Brake / 50% Rev EZ-Set® push-button setup Multi-color LED Thermal shutdown protection Efficient, low-loss MOSFET design Smooth, high-frequency operation Easy installation in Traxxas models Backed by the Traxxas Lifetime Electronics warranty   XL-5 LVD WATERPROOF ESC SPECIFICATIONS Input voltage: ­ 4-7 Cells (4.8 to 8.4 Volts DC) Case Size: ­ 1.23"W x 2.18"D x 0.61" H Weight: ­ 2.44 Ounce Motor Limit: ­ 15-turns** (540 Size) 12-turns** (550 Size) On Resistance Forward: ­ 0.007 Ohms On Resistance Reverse: ­ 0.014 Ohms BEC Voltage: ­ 6.0 VDC BEC Current: ­ 1A Power Wire: ­ 14 Gauge / 5" Input Harness Wire: ­ 26 Gauge / 9" PWM Frequency: ­ 1600 Hz Low Voltage Detection (LVD): ­ 2-Stage indicators, switchable (on or off) Thermal Protection: ­ Thermal shutdown Profile selection: ­ Sport Mode:     100% FWD, 100% brakes, 100% REV Race Mode:     100% FWD, 100% brakes, no REV Training Mode:*     50% FWD, 100% brakes, 50% REV Single-button setup: ­ Yes, Traxxas EZ-Set®

799,-

999,-

Ikke på lager
-20%
Art.nr: BULK TRX 2471R
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 2471R Tires & Wheels 2,2" Alias/Tracer Soft 2WD Front (2 Tires & wheels, assembled (Tracer 2.2" chrome wheels, Alias ribbed 2.2" tires) (2) (Bandit front, soft compound w/ foam inserts)   Alias 2.2" soft compound tires come assembled with foam inserts on Tracer 2.2" wheels. Available in mirror chrome and black chrome finish.

279,-

KJØP
Art.nr: BULK TRX 3290
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 3290 Screws 3x8mm washerhead self-tapping Screws, 3x8mm washerhead self-tapping (6)

25,-

KJØP
Art.nr: BULK TRX 3642
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 3642 Shoulder Screws 3x12x5mm (6) This is a Package of 3x12x5mm Shoulder Screws for many                           Traxxas Vehicles. FEATURES: Black steel construction           Screws are half-threaded/half-smooth           Phillips head INCLUDES: Six 3x12x5mm shoulder screws SPECS:    Length: 12mm (.47")           Diameter: 3mm (.12")           Thread Length: 5mm (.20")

39,-

Ikke på lager
Art.nr: BULK TRX 2437
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 2437 Front Axles Bandit  This is a pair of Front Axles for the Traxxas Bandit Buggy Kit                    and the Ready To Run version. FEATURES: Constructed of steel. INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run             Version  SPECS:    Length:                  0.94" (24mm)           Length of threaded area: 0.14" (3.5mm)           Thread size:             0.16" (4mm) REQUIRES: Placing each axle into the Steering Blocks TRX 3636, and installing             Stub Axle Pins TRX 2754.

39,-

Ikke på lager
Art.nr: BULK TRX 3722A
Copied
 *** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 3722A Lower Chassis Gray    This is a Grey Lower Chassis for the Traxxas Electric Rustler Series and Bandit. FEATURES: Constructed of composite plastic INCLUDES: One Traxxas Grey Lower Chassis REQUIRES: Installing all components onto chassis SPECS:    Length:   13.5" (343mm)           Width:     5.3" (135mm)           Thickness: 0.08"  (2mm)

179,-

Ikke på lager
Art.nr: BULK TRX 3723A
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** This is a Traxxas Grey Upper Chassis for the Traxxas Electric Rustler series. FEATURES: Grey plastic construction           Molded in servo mount and bellcrank post INCLUDES: One upper chassis SPECS:    Length:                4.94"         (125mm)           Width:                 2.91"         ( 73mm)           Height:                1.25"         ( 31mm)

49,-

59,-

Ikke på lager
-17%
Art.nr: BULK TRX 3762A
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 3762A Ultra Shocks (2) Rear Denne passer til: -Bandit XL5/VXL bak. -Rustler XL5/VXL bak. -og til flere Traxxas biler. Sjekk manualen til din bil.   This is a pair of the Ultra Shocks for the Traxxas Bandit, Rustler, Stampede 2WD, E-Maxx, T-Maxx and Slash 2WD.   INCLUDES: This is a complete assebled set taken out from a new bandit. It just need to be installed  COMMENTS: Two pairs are required if replacing all shocks.

219,-

Ikke på lager
Art.nr: TRX 2417
Copied
     Traxxas clear body for the Bandit (front & rear) Requires: Painting  Includes: Window, Lights, Grill Decal Sheet.       (B4)  

219,-

239,-

KJØP
-8%
Art.nr: TRX 1765
Copied
   These rubber cap diaphragms for Traxxas plastic shocks, also work well with Associated aluminum shocks. Qty-4

29,-

KJØP
Art.nr: TRX 1675
Copied
This is a replacement bushing set for various TRAXXAS KITS.                                                   . FEATURES: Made of metal INCLUDES: 14 bushings SPECS:    5x11mm bushings COMMENTS: These bushings would work on any vehicle using 5x11mm bushings.

59,-

KJØP
Viser 26 til 50 (av 147 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png