Hopp til innhold

Bandit VXL

Populært i denne kategorien

 
Art.nr: TRX 9494
Copied
Traxxas 9494 Input gear, 22-tooth/ input shaft (transmission) (heavy duty) (fits Bandit, Rustler®, Stampede®, Slash 2WD)

129,-

139,-

KJØP
-7%
Art.nr: BULK TRX 3639
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 3639 Shock Tower Front This is a stock replacement FRONT shock tower for the Traxxas Stampede. FEATURES:    Made from black molded nylon    For the Traxxas Stampede SPECS:    Height: 2 3/4"    Thickness: 1/4"    Width at base: 2 3/4"    Width at top: 2" INCLUDES:    (1) Front shock tower for the Traxxas Stampede

59,-

Ikke på lager
Art.nr: BULK TRX 3760A
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 3760A Ultra Shocks Gray Long (2)  Denne passer til: -Bandit XL5/VXL foran. -Rustler XL5/VXL foran. -og til flere Traxxas biler. Sjekk manualen til din bil. This is a pair of the Long Ultra Shocks from Traxxas                       for the Bandit.   INCLUDES: This is assembled part and needs only to install on the car COMMENTS: Two pairs are required if replacing all shocks.  

219,-

Ikke på lager
Art.nr: BULK TRX 3792
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** This is a Dust Cover and Rubber Plug                       for the Traxxas Rustler/Stampede FEATURES:  Made from black molded nylon            For the Traxxas Rustler/Stampede INCLUDES:  Dust cover for the Traxxa Rustler            3 x 6 mm round head coarse thread screws (to mount dust cover)            Rubber Plug Specs:     3" (77mm)            Compatible with Traxxas Telemetry

39,-

Ikke på lager
Art.nr: BULK TRX 5116
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** Disse lagerene er samme størrelse som Tamiya 1150 This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Cars. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X11mm ball bearings, Part #5116 SPECS:    Inside diameter:      3/16"      (5mm)           Outside diameter:     7/16"     (11mm)           Width:                5/32"      (4mm)

39,-

55,-

Ikke på lager
-29%
Art.nr: TRX 1747
Copied
These are 4mm Locking Nuts from Traxxas. FEATURES: Stainless steel construction.           Nylon insert. INCLUDES: 10 Lock Nuts SPECS:    Size:  4mm                       

30,-

KJØP
Art.nr: TRX 1926
Copied
This is a set of TRAXXAS receiver tube caps and a spool that could be used for                          any receiver antenna tubes. FEATURES: Caps are yellow plastic.           Spool is plastic.(for wrapping excess rx wire before putting in tube) INCLUDES: Two caps           One spool                     

25,-

KJØP
Art.nr: TRX 3350R
Copied
Waterproof Velineon VXL-3s Brushless Power System (includes VXL-3s ESC, Velineon 3500 motor, and speed control mounting plate (part #3725)) Børsteløst powersett til elektrobiler, på 3 celler yter denne motoren veldig mye og kan fint brukes alene som motor i E-Maxx, E-Revo eller lignende biler. (dette er 1/8 biler) men man bør gire den til ca 55-60 km/t med 3 celler. Som motorsett i 1:10 får dette powersettet lett bilen opp i 100km/h. 3mm aksel. This is the Traxxas Velineon Extreme Brushless Power System for electric powered R/C vehicles. FEATURES: Each component engineered to work wih each other to eliminate restrictions and allow maximum power flow Velineon VXL3s ESC; vAuto-detects and compatible with brushed, brushless and sensored brushless motors Compatible with NiCd, NiMH (4-9 cells) and 2-3 cell LiPo battery packs-two stage low voltage detection for LiPos Three driver profiles-Sport, Race and Training Modes Gold-plated motor connectors Velineon 3500 Brushless Motor; 10-turn 3500kV Optimized for extreme power and efficiency in 1/10 scale vehicles Ultra high temp neodymium magnets, high-speed ball bearings Precision balanced rotor Traxxas High-Current Connector Reverse polarity protection makes backward connections impossible Compatible with high-current 12-gauge wire Gold-plated wide surface terminals Textured surface for easy gripping INCLUDES: Velineon VXL3s ESC, Velineon 3500 Brushless Motor and high-current connector REQUIRES: Installing in vehicle NiCad, NiMH (4-10 cells) or 2-3 cell LiPo battery SPECS: VXL-3s Input voltage: 4.8-11.1V (4-9 cells NiMH or 2S-3S LiPo) Supported motors: Brushed/Brushless/Sensorless brushless Motor Limit: None Continuous current: 200A Peak current: 320A BEC voltage 6.0V DC Transistor type: MOSFET On-resisteance: 0.00075 ohms Max (0.006/8 FETs) PWM frequency: 12,000Hz Battery connectors: Traxxas High-Current Connector Motor connectors: TRX 3.5mm bullet connectors Motor/battery wiring: 12-gauge Maxx Cable Thermal protection: 2-ge thermal shutdown Case size (l/w/h): 2.19" x 1.54" x 1.3" (55 x 39 x 33mm) Weight: 3.17oz (90g) Velineon 3500 Type: Sensorless brushless RPM/volt: 3500 (10-turn) Magnet type: Ultra High-Temperature, sintered neodymium Connection type: TRX 3.5mm bullet connectors Wire Size: 12-gauge Maxx Cable w/ solder tabs Current Ratings: 65A constant; 100A peak/burst Max RPM: 50,000 Diameter: 1.42" (36mm) (540 size) Length: 2.165"(55mm) Weight: 9.24oz (262g)

2.095,-

2.395,-

KJØP
-13%
Art.nr: TRX 2530
Copied
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Black nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

Art.nr: TRX 2530-BLK
Copied
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Black nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

79,-

89,-

KJØP
-11%
Art.nr: TRX 2530-GRAY
Copied
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Gray nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

79,-

89,-

KJØP
-11%
Art.nr: TRX 2530A
Copied
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Gray nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

79,-

Ikke på lager
Art.nr: TRX 3790
Copied
Gear adapter, fixed Take the guesswork out of setting gear mesh and ensure rock solid hold with Traxxas fixed gear adapters. Compatible with all Traxxas 2WD models including Slash, Bandit, Rustler, and Stampede family models. Includes 5 adapters that cover 7 popular gearing combinations.

59,-

KJØP
Art.nr: TRX 2532
Copied
This is a Firberglass Tie Bar by Traxxas for the SRT FEATURES: Fiberglass Construction INCLUDES: One Tie Bar REQUIRES: Suspension Pins TRX 2640 SPECS:    Length:  98.4 mm  (3.875")           Width:    7.9 mm  (0.3125")           Thickness:  2.0 mm (0.082") COMMENTS: None

49,-

59,-

Ikke på lager
-17%
Art.nr: TRX 3792
Copied
This is a Dust Cover and Rubber Plug                       for the Traxxas Rustler/Stampede FEATURES:  Made from black molded nylon            For the Traxxas Rustler/Stampede INCLUDES:  Dust cover for the Traxxa Rustler            3 x 6 mm round head coarse thread screws (to mount dust cover)            Rubber Plug Specs:     3" (77mm)            Compatible with Traxxas Telemetry

39,-

Ikke på lager
Art.nr: TRX 2593
Copied
Screws, 3x14mm button-head machine (hex drive) (6)

39,-

KJØP
Art.nr: TRX 3793
Copied
This is a Slipper Clutch Shaft for the Traxxas Rustler XL                             and Stampede XL. FEATURES: Steel construction _         Roll pin pre-installed INCLUDES: One slipper clutch set SPECS:    Length:         1.98"          (50mm)           Diameter:        .21"          ( 5mm) COMMENTS: This part will fit both the standard and XL version of the Rustler or Stampede.

39,-

KJØP
Art.nr: TRX 2640
Copied
This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. Includes: two chrome  suspension pins and   three "E" type retaining clips. Requires:nothing parts are a direct replacement. Specs:3mm x 44mm  pins are notched for the 3MM "E" type retaining clips at each end.

29,-

39,-

KJØP
-26%
Art.nr: TRX 2742
Copied
These are 5.8mm ball ends and balls.

49,-

59,-

KJØP
-17%
Art.nr: TRX 3639
Copied
This is a stock replacement FRONT shock tower for the Traxxas Stampede. FEATURES:    Made from black molded nylon    For the Traxxas Stampede SPECS:    Height: 2 3/4"    Thickness: 1/4"    Width at base: 2 3/4"    Width at top: 2" INCLUDES:    (1) Front shock tower for the Traxxas Stampede

59,-

KJØP
Art.nr: TRX 3640
Copied
These are the Suspension Screws Pins for the                      Traxxas Rustler, Stampede and Bandit.            The hinge pins hold the suspension arms to the bulkheads FEATURES: Durable steel construction INCLUDES: Two 48mm pins           Two 34mm pins           Two 30mm pins           Two 28mm pins           Two 25mm pins REQUIRES: Installation on the Rustler, Stampede or Bandit

59,-

69,-

KJØP
-14%
Art.nr: TRX 4628R
Copied
These are the Differential Output Yokes                 for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Black plastic construction INCLUDES: Two differntial output yokes           Two 3x5mm countersunk screws           Two screw pins REQUIRES: Installation SPECS:    Length: .70" (18mm)           Diameter: .51" (13mm)

59,-

Ikke på lager
Art.nr: TRX 3752
Copied
This is a pair of Stub Axle Carriers                for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Molded nylon construction (black) INCLUDES: Two stub axle carriers REQUIRES: Installation on the vehicle

39,-

KJØP
Art.nr: TRX 3931
Copied
These are the Traxxas Flathead 3 x 8mm Screws. FEATURES: Metal construction           Black in color INCLUDES: Six 3 x 8mm Flathead Hex Screws REQUIRES: Installation on the vehicle

35,-

Ikke på lager
Art.nr: TRX 5529
Copied
This is the Shim Set for the Traxxas Nitro Jato Stadium Truck. FEATURES: Metal construction           Silver in color           For Adjusting Roll Center INCLUDES: Four Silver Metal Hollow Balls           Four 3mm Silver Washers REQUIRES: Assembly onto Vehicle

45,-

KJØP
Viser 126 til 150 (av 154 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png