Hopp til innhold

Bandit VXL

Populært i denne kategorien

 
Art.nr: TRX 2765T
Copied
  Dette er en bestillingsvare. Dvs. at vi bestiller den inn når noen ønsker det. Leveringstid ca. 14-16 dager.   Shock shafts, hardened steel, titanium nitride coated (X-long) (2) These hardened, ground steel shafts have a super tough titanium nitride coating with a micro-polished finish that reduces stiction for smoother performance and resists scratching for much longer shaft life. The special hardened ground steel is extra strong to prevent bending.

119,-

KJØP
Art.nr: TRX 3352R
Copied
This is the Rebuild Kit for the Traxxas Velineon                         3500 Brushless motor - TRX 3351  FEATURES: Improves performance of an old motor           Step-by-step instruction sheet guides you through the process INCLUDES: Two 5 x 11 x 4mm Bearings           One 5 x 7 x 13mm Brass Bushing           One 5 x 7 x 5.6mm Brass Bushing           Four 2.5 x 5mm Button Head Screws (1.5mm hex size) REQUIRES: Removal of old parts and installation of new parts following the            included instruction sheet COMMENTS: For the replacement motor rotor order TRX 3353                               For the replacement motor cover endbell order TRX 3354   020334335203

149,-

KJØP
Art.nr: TRX 3354R
Copied
 NB! Denne er den samme som TRX 3354. Motor cover, endbell (Velineon 3500)

39,-

KONTAKT
Art.nr: TRX 3636G
Copied
Traxxas aluminum steering blocks improve appearance, ruggedness, and control. In addition to the strength and precision of the machined billet 6061-T6 aluminum steering blocks, larger 5x11mm ball bearings are included for smooth performance, reduced friction, and long life. Rubber seals on the bearings make them virtually maintenance free. Easy, bolt-on good looks in red, blue or green anodizing.

399,-

429,-

KJØP
-7%
Art.nr: TRX 3645
Copied
These are the Traxxas 61mm Turnbuckle Toe Links  for the Traxxas Stampede.     FEATURES Metal and Nylon Construction  Silver and Black in Color  Assembled w/Rod Ends   INCLUDES Two 61mm (96mm center to center) turnbuckles   REQUIREMENTS Installation on the vehicle

99,-

KJØP
Art.nr: TRX 3677
Copied
This is an optional Wheelie Bar Mount for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to hold wheelie bar arm and wheels in             place INCLUDES: Assembled optional Wheelie Bar Mount with mounting instructions and             hardware REQUIRES: Wheelie Bar Arm                   Wheels and Axles

49,-

KJØP
Art.nr: TRX 3685
Copied
These are Plastic Washers from Traxxas. FEATURES: White plastic construction. INCLUDES: (6) Washers SPECS:    Size:  5x8x1mm

29,-

KJØP
Art.nr: TRX 3722
Copied
     Denne er erstattet med TRX 3728    This is a Black Lower Chassis for the Traxxas Electric Rustler Series and Bandit. FEATURES: Constructed of composite plastic INCLUDES: One Traxxas Black Lower Chassis REQUIRES: Installing all components onto chassis               SPECS:                                  Length:   13.5" (343mm)                Width:     5.3" (135mm)                 Thickness: 0.08"  (2mm)

Art.nr: TRX 3723
Copied
 This is the Upper Chassis for the Traxxas Rustler and Bandit FEATURES: Black Plastic Construction INCLUDES: One Chassis REQUIRES: Rustler or Bandit

59,-

KJØP
Art.nr: TRX 3745
Copied
           These are the Traxxas 59mm Turnbuckle Toe Links               for the Traxxas Rustler, Stampede and Bandit VXL. FEATURES: Metal and Nylon Construction           Silver and Black in Color           Assembled w/Rod Ends INCLUDES: Two 59mm (78mm center to center) turnbuckles REQUIRES: Installation on the vehicle

105,-

Ikke på lager
Art.nr: TRX 3762A
Copied
Denne passer til: -Bandit XL5/VXL bak. -Rustler XL5/VXL bak. -og til flere Traxxas biler. Sjekk manualen til din bil.   This is a pair of the Ultra Shocks for the Traxxas Bandit, Rustler, Stampede 2WD, E-Maxx, T-Maxx and Slash 2WD. FEATURES: Gray composite bodies           Stock replacement unassembled shocks           Preload spacers and two red springs INCLUDES: Two Ultra Shocks for the Traxxas Cars with bottle of silicone             oil and assembly diagram REQUIRES: Assembly COMMENTS: Two pairs are required if replacing all shocks.

219,-

KJØP
Art.nr: TRX 3765A
Copied
These are the Long Shock Bodies for the Traxxas Ultra Shocks. FEATURES Molded Composite Gray in Color INCLUDES Two ultra shock bodies (long) REQUIREMENTS Installation SPECIFICATIONS Length: 1.45" (37mm) Diameter: .51" (13mm)

39,-

KJØP
Art.nr: TRX 3766A
Copied
These are the Shock Bodies for the Traxxas Ultra Shocks  used on the Traxxas T-Maxx 3.3.   FEATURES Molded Composite  Gray in Color   INCLUDES (2) Bodies   REQUIREMENTS Installation  SPECIFICATIONS  Length: 1.777" (45.1mm)  Diameter: 0.521" (13.2mm)

39,-

KJØP
Art.nr: TRX 3767
Copied
 These are Shock Caps and Bottoms for Traxxas kits.                 These seal the shock containing the shock oil. FEATURES: Nylon construction INCLUDES: Two nylon shock cap (tops) Two nylon shock cap (bottoms) REQUIRES: Other shock components SPECS: Diameter Tops Bottoms 16MM 13MM COMMENTS: These fit the N/E 4-tec, N/E Stampede, and T/E-Maxx

39,-

KJØP
Art.nr: TRX 3768
Copied
These are the Traxxas Spring Retainers for Traxxas Shocks.        This set contains the spring retainers that hold the springs in     place over the shock body and the piston heads that control the amount                      of oil flow in the shock cylinder. FEATURES: Constructed of molded plastic.           Contains enough parts for two shocks.           Fits the shocks on most Traxxas nitro and electric powered vehicles.           Two hole piston head for greater dampening or three hole piston head             for softer spring performance. INCLUDES: One Traxxas Spring Retainer Set with:             Two upper and two lower spring retainers             Two 2 hole piston head covers             Two 3 hole piston head covers REQUIRES: Disassembly of shock to install parts.

39,-

KJØP
Art.nr: TRX 3769
Copied
This is the Traxxas replacement TRX3769 Spring Pre-Load Spacers that comes with the Stampede and Rustler trucks and many others Traxxas cars along with the Black Long Shocks. and Black XX-Long shocks. FEATURES Made of a black plastic/nylon material. Used to help pre-load the shock springs. This is installed on the top of the shock springs. Enough for 1 pair of shocks. INCLUDES 2 spacers 1mm thick 2 "" 2mm "" 2 "" 3mm "" 2 "" 4mm "" , COMMENTS Looks like a letter "C" Also fits shocks with a 13.5mm outside diameter body.

59,-

KJØP
Art.nr: TRX 4676
Copied
This is a 48P, 76T Spur Gear for models with                     Traxxas Torque Control Slipper Clutch. FEATURES: 48 pitch           76 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   76

39,-

KJØP
Art.nr: TRX 6528
Copied
This is the Traxxas TQi 2-Channel 2.4GHz Transmitter Receiver and Servos not Included. FEATURES Can be equipped with the Traxxas Link Wireless Module TRX 6511 and used with the iPhone, iPad or iPod touch* to create a graphical user interface for the vehicle Simple two-button programming interface Built-in failsafe Automatic model recognition recalls settings for up to 30 Traxxas Link enabled models Adjustable throttle and steering endpoints Multi-Function knob can be programmed to control Steering Sensitivity Throttle Sensitivity, Steering Percentage, Braking Percentage, or Throttle Trim INCLUDES Traxxas TQi 2-Channel 2.4GHz Transmitter REQUIREMENTS AA Batteries: Four for transmitter Servos and receiver of modeler's choice COMMENTS * Traxxas Link Wireless Module is not included and must be purchased separately.

995,-

1.095,-

KJØP
-9%
Art.nr: TRX 6529
Copied
Transmitter, TQi Traxxas Link™ enabled, 2.4GHz high output, 3-channel (transmitter only)   Traxxas 6529 TQi 2.4GHz 3-Channel Radio System (Link Enabled) (Transmitter Only) This is a replacement Traxxas TQi 2.4Ghz 3-Channel Transmitter. The TQi transmitter is compatible with the Traxxas Link Wireless Module (TRX 6511) that turns your iPhone, iPad, or iPod touch into a powerful tuning tool for your Traxxas model. The full-color display combines with the Traxxas Link App to deliver an intuitive, high-definition, full-color graphical user interface that unlocks your radio system for ultimate vehicle control. In addition to adjusting the TQi radio system's advanced features via a visual and intuitive interface, real-time telemetry becomes available through a customizable dashboard. Prepare to unlock the full potential of the TQi 2.4GHz radio system through the Traxxas Link Wireless Module. TQi Transmitter Features: High Output signal for maximum range Integrated internal antenna Simple 2-Button Interface Steering trim and Multi-Function knobs Adjustable steering and throttle percentage (dual rates) Adjustable steering and throttle sensitivity (exponential) Adjustable steering and throttle end points Automatically stores and loads settings for up to 30 Traxxas Link Model Memory enabled models—just switch on and drive, "model selection" is not required. High 13ms frame rate and near-zero latency for responsive control Comfortable ergonomic design Updated steering wheel and foam grip Operates on just 4 AA batteries Traxxas Link Wireless Module Features: Compatible with Apple iPhone, iPad, and iPod touch Use with the powerful Traxxas Link app View real-time telemetry with optional sensors Bluetooth low energy Easy and simple device pairing Powered by TQi transmitter Integrated into transmitter body Quick and easy installation, installs in minutes Traxxas Link Wireless Module included with select Traxxas vehicles Traxxas Link Application Features: Available on the App Store Intuitive iPhone, iPad, and iPod touch interface Customizable Dashboard Dial or digital readout gauges Up to nine gauges can be displayed at one time Set threshold warnings and log maximums, minimums, or averages Review telemetry feedback via the dashboard recording function that includes sound Instant replay feature captures the previous 60-seconds of dashboard activity Recordings can be named and saved See telemetry feedback from electric and nitro models for speed, temperature, and voltage Edit, save, and share drive profiles Visually manage an unlimited number of models with the Traxxas Link App and see: Transmitter model history Model names Customizable settings Profiles Note: This transmitter does not include the Link Wireless Module, it must be purchased separately (TRX 6511).

1.095,-

1.195,-

KONTAKT
-8%
Art.nr: TRX 9480A
Copied
Traxxas 9480A Differential assembly (complete) (fits Pro Series Magnum 272R™ Transmission) This pre-assembled differential is ready-to-install in any Magnum 272R™ transmission. The sealed differential comes filled with grease for smooth hard-charging action. The differential will also accept silicone differential fluid which may be used to vary the limited-slip performance. Use ultra-thick 500k fluid for drag racing applications. Includes 10x15 mm bearings. Does not fit standard Magnum 272™ transmission. Replacement part for these models: Bandit® VXL Rustler® VXL Slash VXL Stampede® VXL Accessory part for these models: Drag Slash

549,-

599,-

KJØP
-8%
Art.nr: BULK TRX 2437
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 2437 Front Axles Bandit  This is a pair of Front Axles for the Traxxas Bandit Buggy Kit                    and the Ready To Run version. FEATURES: Constructed of steel. INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run             Version  SPECS:    Length:                  0.94" (24mm)           Length of threaded area: 0.14" (3.5mm)           Thread size:             0.16" (4mm) REQUIRES: Placing each axle into the Steering Blocks TRX 3636, and installing             Stub Axle Pins TRX 2754.

39,-

Ikke på lager
Art.nr: BULK TRX 3722A
Copied
 *** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 3722A Lower Chassis Gray    This is a Grey Lower Chassis for the Traxxas Electric Rustler Series and Bandit. FEATURES: Constructed of composite plastic INCLUDES: One Traxxas Grey Lower Chassis REQUIRES: Installing all components onto chassis SPECS:    Length:   13.5" (343mm)           Width:     5.3" (135mm)           Thickness: 0.08"  (2mm)

179,-

Ikke på lager
Art.nr: BULK TRX 3723A
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** This is a Traxxas Grey Upper Chassis for the Traxxas Electric Rustler series. FEATURES: Grey plastic construction           Molded in servo mount and bellcrank post INCLUDES: One upper chassis SPECS:    Length:                4.94"         (125mm)           Width:                 2.91"         ( 73mm)           Height:                1.25"         ( 31mm)

49,-

59,-

Ikke på lager
-17%
Art.nr: BULK TRX 3762A
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 3762A Ultra Shocks (2) Rear Denne passer til: -Bandit XL5/VXL bak. -Rustler XL5/VXL bak. -og til flere Traxxas biler. Sjekk manualen til din bil.   This is a pair of the Ultra Shocks for the Traxxas Bandit, Rustler, Stampede 2WD, E-Maxx, T-Maxx and Slash 2WD.   INCLUDES: This is a complete assebled set taken out from a new bandit. It just need to be installed  COMMENTS: Two pairs are required if replacing all shocks.

219,-

Ikke på lager
Art.nr: TRX 1633
Copied
This is a assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. INCLUDES: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips,           4 of the shock C-clips and 3 body clips.

29,-

39,-

KJØP
-26%
Viser 26 til 50 (av 154 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png