Hopp til innhold

Traxxas biler

Populært i denne kategorien

Art.nr: TRX 2250
Copied
High-Torque 330 Blue Servo The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A powerful coreless motor provides 330 ounce-inches of torque for the most demanding applications.* The High-Torque 330 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard TRX 2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single TRX 2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.     For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit TRX 2262 and a steel servo horn TRX 8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.           HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque Metal gears Dual ball bearings Brushless motor technology Aluminum center case       SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx     High-Torque Blue 330 Waterproof Metal-Gear Coreless Digital Servo For the ultimate experience in precision steering authority, two new high-torque metal gear waterproof servos are available from Traxxas. Traxxas high-torque servos are designed for a factory fit in 1/10 Traxxas vehicles and both servos feature full metal gears, dual ball bearings, and waterproof cases with aluminum center sections for added heat dissipation. Both servos are designed to work flawlessly with Traxxas Stability Management for laying down maximum power on any surface. The High-Torque Blue 330 is powered by a coreless motor for 24 kg/cm of torque and 0.19 transit time. For optimum control and responsiveness, the High-Torque Red 400 uses brushless motor technology for a massive 29 kg/cm of torque and 0.15 transit time.   Factory fit for drop-in installation into Traxxas models Waterproof 24 kg-cm of torque and 0.19 transit time Metal gears Dual ball bearings Coreless motor technology Aluminum center case SPECIFICATIONS: Motor Type: Coreless Operating Voltage: 6.0-7.4V Torque: 24 kg/cm @ 6.0V Speed: 0.19 sec/60° @ 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital

895,-

995,-

KJØP
-10%
Art.nr: TRX 2085X
Copied
This is the optional High-Torque Digital Metal Gear Steering Servo, Servo Saver Spring, and Steering Link for the Traxxas X-Maxx Monster Truck. FEATURES 23% more torque that stock replacement servo Ball bearing equipped Full metal gears Stiffer servo saver spring Adjustable steel steering linkage rod Aluminum heat sink center case to help dissipate heat and prolong servo life INCLUDES High-Torque Digital Waterproof Steering Servo Steering Linkage Rod with Ball Ends Servo Saver Spring SPECIFICATIONS Dimensions: 1.97 x 2.0 x 0.98" (50 x 51.5 x 24.9mm) not including heat sink

Art.nr: TRX 2085XL
Copied
Traxxas 2085XL - Digital High Torque Metal Gear BB WP servo Servo, digital high-torque, metal gear (ball bearing), waterproof/ servo saver spring/ steering link The Maxx®-Duty metal-gear steering servo features full all-metal gears and ball bearings for increased precision. The Maxx-duty servo puts out 23% more torque than the standard 2085 servo to take on the most extreme environments. The servo includes a stiffer servo saver spring and steel steering linkage for maximum steering authority and control during high speed driving. Servo requires Maxx® mount found in Maxx and X-Series™ vehicles. Replacement part for these models: Funco® Pro Scale® Sand Car X-Maxx® XRT® Servo requires Maxx® mount found in Maxx and X-Series™ vehicles.

1.195,-

1.295,-

KJØP
-8%
Art.nr: Bulk TRX 2085
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** This is the High-Torque Digital Waterproof Steering Servofor the Traxxas X-Maxx Monster Truck. FEATURES Ball bearing equipped Preinstalled aluminum heat sink to help dissipate heat and prolong servo life INCLUDES High-Torque Digital Waterproof Steering Servo with Wire Lead and Connector SPECIFICATIONS Torque: 365oz/in Speed: 0.17 sec/60° @ 6V Dimensions: 1.97 x 2.0 x 0.98" (50 x 51.5 x 24.9mm) not including heat sink Weight: 3.6oz (103g) including heat sink

599,-

899,-

Ikke på lager
-33%
Art.nr: TRX 2085
Copied
Dette er en servo med plast tannhjul så vi i SamiRC anbefaler at du heller tar TRX 2085RL   This is the High-Torque Digital Waterproof Steering Servofor the Traxxas X-Maxx Monster Truck. FEATURES Ball bearing equipped Preinstalled aluminum heat sink to help dissipate heat and prolong servo life INCLUDES High-Torque Digital Waterproof Steering Servo with Wire Lead and Connector SPECIFICATIONS Torque: 365oz/in Speed: 0.17 sec/60° @ 6V Dimensions: 1.97 x 2.0 x 0.98" (50 x 51.5 x 24.9mm) not including heat sink Weight: 3.6oz (103g) including heat sink

829,-

899,-

KJØP
-8%
Art.nr: TRX 2075X
Copied
Servo, digital high-torque, metal gear (ball bearing), waterproof     Length: 41 mm Height: 42 mm Width: 20 mm Max Voltage: 6,0 V Features: Water Proof, Digital, Metal Gears

699,-

749,-

KJØP
-7%
Art.nr: BULK TRX 2080A
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "BULK" Traxxas Servo 2080A Micro Sealed Servo, micro, waterproof.   Length: 29,5 mm Height: 29 mm Width: 14 mm Max Voltage: 6,0 V Speed at 6,0V: 0,11 sec/60°

289,-

369,-

Ikke på lager
-22%
Art.nr: TRX 2080A
Copied
Traxxas Servo 2080A Micro Sealed Servo, micro, waterproof.   Length: 29,5 mm Height: 29 mm Width: 14 mm Max Voltage: 6,0 V Speed at 6,0V: 0,11 sec/60°

349,-

369,-

KJØP
-5%
Art.nr: SW-0250MG PLUS
Copied
SAVÖX SW-0250MG-PLUS - Water Proof Metal-Geared Mini Servo The SW-0250MG-PLUS is a waterproof, high torque, digital mini servo that performs! An excellent replacement for the standard servo found in Traxxas 1/16 scale vehicles. Features: New: Soft Start New: Sanwa SSR compatible Strong metal gear train for added durability Waterproof case design Ideal for cars and boats subject to water or snow Ideal for Traxxas 1/16 vehicles Specifications: Torque @4.8V: 3.5kg/cm Torque @6V: 5kg/cm Speed @4.8V: 0.14 sec/60 deg Speed @6V: 0.11 sec/60 deg Dimensions L x W x H: 29.5 x 14.0 x 32.5mm Weight: 25g Technical Details: Operating Temperature: -10° to 50°C Running Current (no load): 80mA @4.8V, 100mA @6.0V Stall Current (at locked): 1000mA @4.8V, 1250mA @6.0V Idle Current: 5mA @4.8V, 5mA @6.0V Wire Length: 200 ± 5mm Output Gear Spline: 21 Tooth Bearings: 1BB Operating Travel: 100° (1000 → 2000 µ second) Neutral Position: 1500 µ second Pulse Width Range: 800 → 2200 µ second Maximum Travel: Appx 130° (900 → 2100 µ second) Refresh Rate: 240 Hz Motor Type: Brushed

495,-

KJØP
Art.nr: TRX 2275
Copied
Traxxas 2275 - Servo 25Kg Digital BB Metal Gear Sealed Specs: Motor Type: Brushed Operating Voltage: 6-7.4V DC Torque: 25 kg/cm (6V) - 35kg (7.4V) Speed: 0.25 sec/60° (6V) - 0.16 sec/60° (7.4V) Weight: 67g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital Weight: 67 g Max Voltage: 7,4 V Speed at 6,0V: 0,25 sec/60° Speed at 7,2/7,4V: 0,16 sec/60° Torque at 6,0V: 25 kg/cm Torque at 7,2/7,4V: 35 kg/cm Features: Digital , Dual Ball Bearing , HV , Metal Gears

899,-

949,-

KJØP
-5%
Art.nr: HD-TR-5
Copied
TR-5 WP MG TRX 8.8kg / 0.06s Power HD servo spesialtilpasset som erstatningsservo for TRX-2080X. Flott og motstandsdyktig utførelse i aluminiums-hus. Servoen har metallgir og vannbestandig. 2 ulike servohorn medfølger og fastmontertkabel på 180mm.Kan passe flere 1/16-biler.   Spesifikasjoner: Kraft 4.8V: 3.8kg/cm Hastighet 4.8V:    0.11s Kraft 6.0V: 6.0kg/cm Hastighet 6.0V: 0.09s Kraft 7.4V: 8.0kg/cm Hastighet 7.4V: 0.07s Kraft 8.4V: 8.8kg/cm Hastighet 8.4V: 0.06s Vekt: 35g Gir: Metal Størrelse: 29.5 x 14 x 31.4mm Servohorn 25T Futaba Style

649,-

699,-

KJØP
-7%
Art.nr: PowerHD TR-4M
Copied
Power HD TR-4M er en kompakt mini-servo utviklet for 1/18 crawlere som Traxxas TRX-4M. Den kombinerer lav vekt med et solid tannhjulsett i kobber og aluminium. Med rask responstid og presis kontroll er TR-4M et ideelt oppgraderingsvalg, servoen er også sprutsikker. Spesifikasjoner: Dimensjoner (LxBxH) 22.5x 12.5x 24.0mm Spenning 4.8-7,4V Torque 4.8V 2.5kg Torque 6.0V 3kg Torque 7.4V 3.2kg Speed 4.8V 0.11s Speed 6.0V 0.095s Speed 7.4V 0.085s Gir Plastikk Vekt 14g   Erstatter TRX 2065, 2065X, 2065A, 2065R, 2065T

349,-

379,-

KJØP
-8%
Art.nr: TRX 2056
Copied
This is the replacement High Torque Waterproof Servo                      for many Traxxas cars. FEATURES: Plastic waterproof blue case INCLUDES: One high torque waterproof servo with J style connector REQUIRES: Mounting in the car. SPECS:    Length: 2.16" (55mm)           Width: .78"  (20mm)           Height: 1.69" (43mm)           Weight:  1.58oz (45g)  

399,-

419,-

KJØP
-5%
Viser 26 til 38 (av 38 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png