Hopp til innhold

Craniac 1/10 2WD Monster

Populært i denne kategorien

 
Art.nr: TRX 1664
Copied
This is the replacement front shock shafts for the Traxxas LSII. Includes: 2- front shock shafts.

39,-

KJØP
Art.nr: TRX 1726
Copied
This is a replacement antenna tube. Antenna tubes are used to help secure and protect reciever antenna wires. INCLUDES: 1 blue antenna tube and 1 black antenna tube cap. SPECIFICATIONS: Length: 11"                 Outside Diameter: 1/8"

29,-

KJØP
Art.nr: TRX 1844X
Copied
Denne erstatter TRX 1844 This is a large servo saver that can be used in Traxxas cars or any car that requires a large style servo saver. FEATURES: Tough white plastic construction. INCLUDES: 1 large servo saver and 3 adaptors that allow you to mount the saver           on most popular servos including: Futaba, Hobbico, Tower, Airtronics,           and Traxxas. Also included is a mounting screw. SPECIFICATIONS: Length: 1-3/8"                 Diameter: 1"                 The servo saver has 6 holes for mounting the steering linkages.

55,-

KJØP
Art.nr: TRX 1942
Copied
This set of rod ends, balls, and screws is used on all but four of Traxxas' kits.  It WILL NOT WORK ON: the Sledgehammer, original Hawk, Cat, or Bullet. Includes:  4 short rod ends (17mm)            16 long rod ends (19mm)            2  ball screws            18 hollow ball connectors

85,-

95,-

KJØP
-11%
Art.nr: TRX 2336
Copied
This is a Pair of 78mm Steel Turnbuckles from Traxxas.  These are links to connect camber, or toe-in on the T-Maxx.     FEATURES Steel construction  Adjustable without removing from vehicle   INCLUDES Two 78mm turnbuckles for the Traxxas T-Maxx   REQUIREMENTS Nothing. These are direct replacement parts.   SPECIFICATIONS  Length: 78mm (3.07")  Thread diameter: 3mm (0.11")

29,-

39,-

KJØP
-26%
Art.nr: TRX 2427
Copied
Gear, 14-T pinion (48-pitch)/ set screw

35,-

KJØP
Art.nr: TRX 2554
Copied
These are 3x5mm Backplate screws for the Traxxas 2.5 Engine. FEATURES: Black steel construction. INCLUDES: Six black steel cap head screws. REQUIRES: Assembly on coverplate. SPECS:    Length: 5mm           Diameter: 3mm COMMENTS: These may also be referred to as coverplate screws.

35,-

KJØP
Art.nr: TRX 2563
Copied
Screws, 3x15mm roundhead machine (6)

19,-

KJØP
Art.nr: TRX 2656
Copied
This is a set of XXL shock shafts for the Traxxas shocks. Includes: Two shock shafts Features: hardened chrome/steel construction Specs: 2 1/8" long or 54mm          1/16" diameter or 1.5mm Requires: Extra long shocks Comments: These are threaded on one end, and have the slots for e-clips on the           other.

39,-

KJØP
Art.nr: TRX 2742X
Copied
This are Rod Ends Short for the Nitro T-Maxx.              These rods ends attach to turnbuckles for front/rear. FEATURES: Black nylon rod ends           Steel pivot balls INCLUDES: Six nylon rod ends           Six pivot balls REQUIRES: Turnbuckles: TRX 2742X SPECS:    Length: .695" (17.6mm)           Inner Diameter: .217" (5.5mm)

49,-

Ikke på lager
Art.nr: TRX 3621
Copied
This is the Front Bumper with Mount for the                       Traxxas Monster Jam Replica Series. FEATURES: Plastic construction INCLUDES: Front Bumper with Mount and Mounting Screws

59,-

KJØP
Art.nr: TRX 3623-BLK
Copied
 This is a replacement set of skid plates for the Traxxas Stampede. FEATURES: Made of black molded nylon For the Traxxas Stampede SPECS:    Length of front plate: 5 5/8"    Thickness of front plate: 3/16"    Width of front plate: 2 1/8"    Length of rear plate: 4 3/8"    Thickness of rear plate: 1/8"    Width of rear plate: 2 1/8" INCLUDES:    (1) Front skid plate    (1) Rear skid plate

89,-

KJØP
Art.nr: TRX 3626
Copied
Mounting plate, electronic speed control/ receiver box (for installation of XL-5/ XL-10/VXL and waterproof receiver box into Stampede)

39,-

KJØP
Art.nr: TRX 3627X
Copied
This is the Reciever & Battery Hold-Down Plate for the Traxxas Stampede. FEATURES:  Plastic construction, gray in color            Metal posts and body clips INCLUDES:  One battery hold down            One receiver hold down            Two metal posts            Two body clips            Servo tape/adhesive foam pad REQUIRES:  Installation on the Stampede

59,-

Ikke på lager
Art.nr: TRX 3641
Copied
             These are Non-Adjustable Camber Link for the Traxxas                              Rustler and Stampede. FEATURES: Black Plastic Construction INCLUDES: Two Short Links           Two Long Links REQUIRES: Traxxas Rustler or Stampede SPECS:                   Short                          Long           Length:        77 mm  (3.03")                 90 mm (3.54")           Width:         9 mm   (0.354")                9 mm  (0.354")           Height:        4 mm   (0.157")                4 mm  (0.157")

39,-

49,-

KJØP
-20%
Art.nr: TRX 3642
Copied
This is a Package of 3x12x5mm Shoulder Screws for many                           Traxxas Vehicles. FEATURES: Black steel construction           Screws are half-threaded/half-smooth           Phillips head INCLUDES: Six 3x12x5mm shoulder screws SPECS:    Length: 12mm (.47")           Diameter: 3mm (.12")           Thread Length: 5mm (.20")

39,-

Ikke på lager
Art.nr: TRX 3664
Copied
Wheels, satin chrome, dual profile (2.0" outer, 3.0" inner) (electric rear) (2)

99,-

KJØP
Art.nr: TRX 3666
Copied
Wheels, satin chrome, dual profile (2.0" outer, 3.0" inner) (nitro rear/ electric front) (2)

99,-

KJØP
Art.nr: TRX 3667
Copied
Tires, Terra Groove (dual profile 5.3"x2.7"- 2.0") (2)/ foam inserts (2)

269,-

KJØP
Art.nr: TRX 3677
Copied
This is an optional Wheelie Bar Mount for the Traxxas                    Electric Stampede, Rustler and Bandit. FEATURES: Constructed of hardened plastic, black in color           Installs at rear of chassis to hold wheelie bar arm and wheels in             place INCLUDES: Assembled optional Wheelie Bar Mount with mounting instructions and             hardware REQUIRES: Wheelie Bar Arm                   Wheels and Axles

49,-

KJØP
Art.nr: TRX 3757A
Copied
 This is a pair of Traxxas optional Rear Shock Springs in Green. FEATURES: Steel construction INCLUDES: Two Rear Shock Springs in Green REQUIRES: Installing over shock bodies

59,-

KJØP
Art.nr: TRX 3757P
Copied
  Fits: Traxxas Slash (2WD) Traxxas Slash Dakar / Robby Gordon Traxxas Ford F-150 SVT Raptor Traxxas Bandit Traxxas Bandit VXL Traxxas Rustler Traxxas Rustler VXL Traxxas Stampede (2WD) Traxxas Stampede VXL (2WD) Traxxas Skully Traxxas Craniac Traxxas BIGFOOT

49,-

KJØP
Art.nr: TRX 3757R
Copied
              These are Red Rear Shock Springs for the           Traxxas T-Maxx 3.3 4WD Nitro RTR Monster Truck FEATURES: 2.9 lb/in tension           Red coating INCLUDES: Two Shock Springs REQUIRES: Assembly onto the Traxxas T-Maxx SPECS:    Length: 79.35mm (3.12")           Diameter: 18mm (0.71")

49,-

KJØP
Art.nr: TRX 3757T
Copied
Springs, rear (blue) (2)

49,-

KJØP
Art.nr: TRX 3757X
Copied
This is a pair of Traxxas White Rear Springs. FEATURES: Painted white           Steel construction INCLUDES: Two springs SPECS:    Length:                  3.19"               (81mm)           Inside diameter:          .61"               (15mm)           Outside diameter:         .71"               (18mm)

49,-

KJØP
Viser 1 til 25 (av 117 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png