This is the Roll Hoop Canopy for the Traxxas Aton and Aton Plus Quadcopters.
FEATURES
One-piece plastic construction, red in color
INCLUDES
Roll Hoop Canopy
Four 2x7mm Mounting Screws
SPECIFICATIONS
Width: 3.8" (97mm)
Height: 3.2" (81mm)
This is the Roll Hoop Canopy for the Traxxas Aton and Aton Plus Quadcopters.
FEATURES
One-piece plastic construction, blue in color
INCLUDES
Roll Hoop Canopy
Four 2x7mm Mounting Screws
SPECIFICATIONS
Width: 3.8" (97mm)
Height: 3.2" (81mm)
This is the Roll Hoop Canopy for the Traxxas Aton and Aton Plus Quadcopters.
FEATURES
One-piece plastic construction, green in color
INCLUDES
Roll Hoop Canopy
Four 2x7mm Mounting Screws
SPECIFICATIONS
Width: 3.8" (97mm)
Height: 3.2" (81mm)
This is the Main Frame in Black for the Traxxas Aton Quadcopter.
FEATURES
Fits the Traxxas Aton and Aton Plus
One-piece molded plastic construction, center section with four
booms and motor cradles
INCLUDES
Main Frame in Black
SPECIFICATIONS
Center Diagonal Distance: 14.57" (370mm)
Vertical Distance: 10.30" (262mm)
This is the Lower Main Frame in Black for the Traxxas Aton Quadcopter.
FEATURES
Fits the Traxxas Aton and Aton Plus
One-piece molded plastic construction
Fasten to bottom of main frame and holds circuit boards in place
INCLUDES
Lower Main Frame in Black
This is the Rotor Blade Set in White for the Traxxas Aton Quadcopter.
FEATURES
Fits the Traxxas Aton and Aton Plus
Stamped "A" and "B" to ensure correct installation
Molded plastic construction
INCLUDES
One each; Clockwise Rotating "A" Stamped Propeller
Counterclockwise Rotating "B" Stamped Propeller
This is the Rotor Blade Set in Blue for the Traxxas Aton Quadcopter.
FEATURES
Fits the Traxxas Aton and Aton Plus
Stamped "A" and "B" to ensure correct installation
Molded plastic construction
INCLUDES
One each; Clockwise Rotating "A" Stamped Propeller
Counterclockwise Rotating "B" Stamped Propeller
This is the Rotor Blade Set in Green for the Traxxas Aton Quadcopter.
FEATURES
Fits the Traxxas Aton and Aton Plus
Stamped "A" and "B" to ensure correct installation
Molded plastic construction
INCLUDES
One each; Clockwise Rotating "A" Stamped Propeller
Counterclockwise Rotating "B" Stamped Propeller
This is a quantity of six 2.6x8mm Screws for the Traxxas Aton Quadcopter.
FEATURES
Steel construction, black in color
Used in the assembly of the Traxxas Aton
May also be used in any application a screw this size is required
INCLUDES
Six 2.6x8mm Screws
REQUIREMENTS
2mm Hex Wrench
This is a quantity of six 2.6x5mm Screws for the Traxxas Aton Quadcopter.
FEATURES
Steel construction, black in color Used on the Aton to attach circuit board to main frame May also be used in any application a screw this size is required
INCLUDES
Six 2.6x5mm Screws
REQUIREMENTS
2mm Hex Wrench
This is the Front LED Light Harness for the Traxxas Aton and Aton Plus.
FEATURES
Installs in LED lens on the front motor boom*
Two lights on end and one in the center of lens
INCLUDES
Three Front LED Lights with Wire Leads and Connector
COMMENTS
*Two Light Harnesses are required per front and rear
This is a pair of Left and Right Front Red LED Lenses
for the Traxxas Aton Quadcopter.
FEATURES
Fits the Traxxas Aton and Aton Quadcopters
Fastens to each front motor boom, and provides red glow
Molded from translucent red plastic
INCLUDES
One each Left and Right Front Red Lenses
(lenses only, LED lights not included)
This is a pair of Left and Right Front Blue LED Lenses
for the Traxxas Aton Quadcopter.
FEATURES
Fits the Traxxas Aton and Aton Quadcopters
Fastens to each front motor boom, and provides blue glow
Molded from translucent blue plastic
INCLUDES
One each Left and Right Front Blue Lenses
(lenses only, LED lights not included)
This is a pair of Left and Right Front Orange LED Lenses
for the Traxxas Aton Quadcopter.
FEATURES
Fits the Traxxas Aton and Aton Quadcopters
Fastens to each front motor boom, and provides orange glow
Molded from translucent orange plastic
INCLUDES
One each Left and Right Front Orange Lenses
(lenses only, LED lights not included)
This is a pair of Left and Right Front Green LED Lenses
for the Traxxas Aton Quadcopter.
FEATURES
Fits the Traxxas Aton and Aton Quadcopters
Fastens to each front motor boom, and provides green glow
Molded from translucent green plastic
INCLUDES
One each Left and Right Front Green Lenses
(lenses only, LED lights not included)
This is a pair of Left and Right Rear Clear LED Lenses
for the Traxxas Aton Quadcopter.
FEATURES
Fits the Traxxas Aton and Aton Quadcopters
Fastens to each rear motor boom
Molded from clear plastic
INCLUDES
One each Left and Right Rear Clear Lenses
(lenses only, LED lights not included)
This is a pair of Left and Right Rear Red LED Lenses
for the Traxxas Aton Quadcopter.
FEATURES
Fits the Traxxas Aton and Aton Quadcopters
Fastens to each rear motor boom, and provides red glow
Molded from translucent red plastic
INCLUDES
One each Left and Right Rear Red Lenses
(lenses only, LED lights not included)