EMAX Tinyhawk Lite Adventure RTF Analog ELRS
Flott startpakke
Nybegynnervennlig
Alt i en boks
ELRS
1S
Emax Tinyhawk Lite Adventure er en 115mm 1s whoopracer for både FPV entusiaster og nybegynnere. Dronen kommer som RTF med alt du trenger som, radio, FPV-briller, USB-lader for 6 batteri og et 1stk 1S 850mAh HV. Dronen kommer med analogt system og integrert ELRS mottaker som støtter den medfølgende E8-radioen.
Betaflight Configurator kompatibel
Dronen er kompatibel med Betaflight Configurator, en open source-programvare for flight controllere. Dette gjør det mulig å tilpasse alt fra hastighet og respons til mer avanserte innstillinger, slik at både du og dronen kan utvikle dere sammen.
Spesifikasjoner
Mottaker
ELRS
Main board
STM32F411
VTX mW
25/100/400mW
Børste motorer
1020 Coreless
Propeller
65mm 3-blade
Batteri
1S 850mAh HV
Kamera
E02
Vekt u/batteri
59g
Eskens innhold
1x EMAX Tinyhawk Lite Adventure drone Analog ELRS
1x FPV-briller Transporter 2 (Uten DVR)
1x E8 Transmitter (ELRS)
4x Emax Propeller
1x EMAX 1S HV 850mAh LiPo batteri (EM2.0 kobling)
1x EMAX USB 6-port USB-lader
1x EMAX skrujern og skruer
4x EM2.0 kontakter
1x USB kabel
1x Manual
This is the RPM Landing Gear in Black for the LaTrax Alias Quadcopter.
FEATURES
Constructed of engineeering grade nylons
Adds 0.8" (20mm) of extra height
Reduces chance of blade strikes when landing in grass
Also spreads center point of each leg further out by 0.45" (11.5mm)
adding stability to take-offs and landings
Replaces the LaTrax #6649 rubber feet
INCLUDES
Four Landing Gear Sections
REQUIREMENTS
0.05" hex key wrench for installation
This is the RPM Landing Gear in Blue for the LaTrax Alias Quadcopter.
FEATURES
Constructed of engineeering grade nylons
Adds 0.8" (20mm) of extra height
Reduces chance of blade strikes when landing in grass
Also spreads center point of each leg further out by 0.45" (11.5mm)
adding stability to take-offs and landings
Replaces the LaTrax #6649 rubber feet
INCLUDES
Four Landing Gear Sections
REQUIREMENTS
0.05" hex key wrench for installation
Prop Guards for the LaTrax Alias
Quick Notes:
– extreme strength and durability
– weighs in at a mere 4 grams per guard (including hardware)
– sold in pairs (two pairs required per Alias)
– 0.05″ hex key wrench is required (not included) for installation.
Description:
The LaTrax Alias is a fun and capable entry-level quadracopter. However, a simple propeller blade strike can easily take out one of its minuscule motors. RPM Prop Guards alleviate that problem. Our Prop Guards are super lightweight and install in a matter of minutes, adding a tremendous amount of protection to both the motors and propellers of the Alias.
Each Prop guard is molded in our trademark blend of engineering grade nylons for unmatched strength and durability. While we made our guards extremely tough, we also made them very light to minimize the effects of added weight on the air frame, weighing in at a mere 4 grams per guard!
RPM Prop Guards for the LaTrax Alias are sold in pairs (two pairs will be needed for one Alias) and are molded in either black or blue. RPM Prop Guards will pay for themselves the first time you have one of those “oops” moments! Don’t let a mistake ruin your day of fun. Bolt a set of RPM Prop Guards on and let your confidence soar!
Tech Notes: RPM Prop Guards are designed as “bumpers” to help deflect light to medium impacts. They are not designed to save the Alias from full speed or gravity fed crashes. Sold in pairs (two pairs are required for one Alias). Four Prop Guards (2 – front & 2 – rear) must be installed at the same time. Failure to install Prop Guards in all four corners may cause adverse flying characteristics. A 0.05″ hex key wrench is required (not included) for installation
These are the RPM Propeller Guards in Blue for the LaTrax Alias Heli.
FEATURES
Plastic construction, blue in color
Weighs only 0.14oz (4g) per guard including hardware
INCLUDES
Two Prop Guards with Mounting Hardware and Instructions
SKYRC HD FPV GOGGLES - Immersion GO
The SKYRC HD FPV goggle with 5.8GHz diversity receivers, can significantly improve reception in the presence of multipathing, by intelligently switching between two independent receivers when signal quality drops.
Another useful application of diversity switching is to select the best signal from two antennas, use a patch, and an omni directional antenna to provide 360 degree coverage or use two patch antennas to cover a wider flight area.
The goggle keeps it super simple for the FPV flier with auto search functionality, easy press buttons, the exact frequency is displayed on the screen so that you never have to guess which frequency and channel you are on, a wide voltage input from 7V to 18V, and 40CH on the 5.8GHz band!
General:
Control via 8 Buttons
High Comfortable with Durable Materials
Adjustable Straps
Built-in Speaker with Volume Control
Built-in Ventilation Fan
OSD Language
Weight: 380 g (Excluding Antennas)
Size: 195 x 139 x 180 mm
LCD Display:
Screen Size: 7"
Screen Resolution: 1024x600
Field of View: 65 Degree
Display Scale: 4:3 or 16:9
Respond Time: 10mS
System: PAL/NTSC Auto Selecting
Diversity Receiver:
Dual Receivers with Dual Antenna Connection
Automatic Antenna Switching
>-90dB Typical Sensitivity
5.8GHz 5 Band 40-Channel Frequencies
Electrical Properties:
Supply Voltage: 7-18V Recommended 2-4S LiPo
Reverse Voltage Protection
Current Consumption 530mA@12V
Interface Connectors:
3.5 mm AV In Port
3.5 mm Earphone Port
XT30 Power In Port (DC 7-18V)
Mini HDMI In Port
2 SMA Antenna Connectors
Frequencies (GHz):
Band A: 5.740, 5.760, 5.780, 5.800, 5.820, 5.840, 5.860, 5.880
Band B: 5.725, 5.745, 5.765, 5.785, 5.805, 5.825, 5.845, 5.865
Band E: 5.733, 5.752, 5.771, 5.790, 5.809, 5.828, 5.847, 5.866
Band F: 5.705, 5.685, 5.665, 5.645, 5.885, 5.905, 5.925, 5.945
Band R: 5.658, 5.695, 5.732, 5.769, 5.806, 5.843, 5.880, 5.917
Set Includes:
SKYRC HD FPV GOGGLE
Power Cable
AV Cable
SpiroNET Omni Antenna
Antenna
Battery Holder
High performance X-Wing™ Laser drone
Reverse Propulsion blad system bidrar til hastigheter opp til 35 MPH
Laser kamp med andre Propel™ Star Wars™ droner
Push knapp for 360º luft stunt
2.4 GHz kontroll inkludert
3 farts innstillinger for begynner til erfarne piloter
Høyst detaljert og håndmalt og nummerert modell
Special edition collectors box med opplyst display eske
Alder 14+
Batterier: 4x AA 1.5v alkaliske batterier (ikke inkludert) for trådløs kontroller
Gjennomsnittlig lade tid: 30-40 min
Gjennomsnittlig bruks tid: 6-8 min
These are the stock replacement 2.5x10mm socket head screws used to
attach the cylinder head to the Traxxas Image engine.
Features: strong steel design
Specifications: 2.5x10mm sockethead screw
Includes: Six 2.5x10mm sockethead screws
This is the Red Canopy for the Latrax Alias Quadcopter in Red
FEATURES
Two-piece plastic construction
INCLUDES
Red Canopy with three Screws
SPECIFICATIONS
Length: 3.4" (87.7mm)
Width: 1.9" (47.5mm)
Height: 0.78" (20mm)
This is the Blue Canopy for the Latrax Alias Quadcopter in Blue
FEATURES
Two-piece plastic construction
INCLUDES
Blue Canopy with three Screws
SPECIFICATIONS
Length: 3.4" (87.7mm)
Width: 1.9" (47.5mm)
Height: 0.78" (20mm)
This is the Orange Canopy for the Latrax Alias Quadcopter in Orange
FEATURES
Two-piece plastic construction
INCLUDES
Orange Canopy with three Screws
SPECIFICATIONS
Length: 3.4" (87.7mm)
Width: 1.9" (47.5mm)
Height: 0.78" (20mm)
This is the Green Canopy for the Latrax Alias Quadcopter in Green
FEATURES
Two-piece plastic construction
INCLUDES
Green Canopy with three Screws
SPECIFICATIONS
Length: 3.4" (87.7mm)
Width: 1.9" (47.5mm)
Height: 0.78" (20mm)
This is the Main Frame for the Latrax Alias Quad-Rotor Helicopter.
FEATURES
Molded plastic construction, black in color
Replaces damaged main frame
INCLUDES
Main Frame for the Latrax Alias Quad-Rotor Heli
Four Screws
This is the Main Frame for the Latrax Alias Quad-Rotor Helicopter.
FEATURES
Molded plastic construction, white in color
Replaces damaged main frame
INCLUDES
Main Frame for the Latrax Alias Quad-Rotor Heli
Four Screws
This is the optional Main Frame in Black Chromefor the Latrax Alias Quad-Rotor Helicopter.
FEATURES
Molded plastic construction with black chrome finish
Holds each motor and all other components in place
INCLUDES
Main Frame for the Latrax Alias Quad-Rotor Heli
Four Screws
This is the Rotor Blade Set in Black for the Latrax Alias Quadcopter.
FEATURES
Plastic construction
Flexible to withstand crashes
INCLUDES
Two Rotor Blades
Two 1.6x5mm Button Head Cap Screws
This is the Rotor Blade Set in White for the Latrax Alias Quadcopter.
FEATURES
Plastic construction
Flexible to withstand crashes
INCLUDES
Two Rotor Blades
Two 1.6x5mm Button Head Cap Screws
This is the Rotor Blade Set in Red for the
Latrax Alias Quadcopter in Red
FEATURES
Plastic construction
Flexible to withstand crashes
INCLUDES
Two Rotor Blades
Two 1.6x5mm Button Head Cap Screws
This is the Rotor Blade Set in Blue for the
Latrax Alias Quadcopter in Blue.
FEATURES
Plastic construction
Flexible to withstand crashes
INCLUDES
Two Rotor Blades
Two 1.6x5mm Button Head Cap Screws
This is the Rotor Blade Set in Orange for the
Latrax Alias Quadcopter in Orange
FEATURES
Plastic construction
Flexible to withstand crashes
INCLUDES
Two Rotor Blades
Two 1.6x5mm Button Head Cap Screws