Hopp til innhold
Hjem / Biler

Biler

Populært i denne kategorien

Hovedbilde Biltyper

Biltyper
Hovedbilde El-biler

El-biler
Hovedbilde Nitro-biler

Nitro-biler
Hovedbilde Bensin-biler

Bensin-biler
Hovedbilde RC-Lastebiler/hengere

RC-Lastebiler/hengere
Hovedbilde RC-Anleggsmaskiner

RC-Anleggsmaskiner
Hovedbilde RC-Tanks

RC-Tanks
Hovedbilde Leketøy Biler

Leketøy Biler
Hovedbilde Pakketilbud

Pakketilbud
Hovedbilde Gavekort

Gavekort
Hovedbilde Utgåtte biler(selges ikke mer)

Utgåtte biler(selges ikke mer)
Hovedbilde Kyosho 34434T1B Fazer MK2 (L) Buick Riviera 1965 Regal ... Hovedbilde Kyosho 34434T1B Fazer MK2 (L) Buick Riviera 1965 Regal ...
Kyosho 34434T1B Fazer MK2 (L) Buick Riviera 1965 Regal ...
Art.nr: 34434T1B
Copied
Now driving R/C is even more fun Newly designed FZ02L chassis with realistic vintage car body For the pure enjoyment of R/C car driving, the combination of a beautifully reproduced car body with the FAZER series chassis can’t be beaten. Kyosho has taken its standard touring car chassis and given it a full model makeover that has evolved performance to a new level. A simplified design with fewer parts has improved maintenance efficiency and reduced weight while core strength and rigidity has been increased through new materials and ribbing and stiffeners on front and rear. In addition, the symmetrical chassis design synergizes excellent front-rear balance through the suspension with responsive control, irrespective of power source. Featuring slipper clutch, front & rear gear differentials, oil shocks and full ball bearing specs, the high durability and impact resistance allows drivers to unleash the full potential of the chassis. Brake disc wheel hubs with two different offsets (0mm, +5mm) provide compatibility with 190mm and 200mm width body styles and allows the wheelbase to be adjusted to 260mm by replacing some parts (sold separately) for compatibility with other 1/10 scale body styles, in addition the body included. The Readyset package comes fully assembled and includes everything except charger and battery for the chassis, and batteries for the transmitter.   ●“Ultra Scale Body” replicates the fine details of the actual body of the car. Kyosho took a step further in scale realism. ●New design shaft drive full-time 4WD touring chassis（FZ02）. ●Factory-assembled Readyset package only requires 4 x AA alkaline batteries for the transmitter, and battery with charger for the chassis. ●Equipped with 2-bevel grease-filled gear diffs on front and rear. ●Large size dog bones and cup joints realize superior reliability and durability. ●Belt mounting battery compartment allows various battery types to be used. ●Full ball bearings that reduce drive loss equipped throughout the drive system. ●Features KS202W waterproof steering servo. ●Includes completely finished body with color scheme and decals applied. ●Sealed differential and transmission deliver reliable performance, even on dusty parking lot surfaces. ●Performance can be further enhanced by installing various optional parts.   1965 Buick Riviera Amongst the famous models produced by America’s prestigious Buick marque, the Riviera released in 1963 received high praise for its distinguished body design. The more elegant 1965 model featured repositioned headlights and tail lights. Vintage Touring Car (VTC) tires & Rostyle type wheels to match vintage car style. Front and rear light buckets compatible with the separately sold 97054 LED light unit series. By installing the LED light unit, it transforms into a body full of real car feeling. Completely new chassis realizes low center of gravity with its simple, functional design. Featuring an integrated gearbox that optimizes torsional rigidity of the main chassis, the nylon material reduces weight while improving impact resistance. Each key component has been reinforced in this simple design without upper deck. Features a reduced number and variety of screws and parts, and consolidation of frequently used screws into the same size. Most screws are flat head screws that can be removed with a 2.0mm hex wrench for easy disassembly. Handling factors such as bump steer and scrub radius are optimized on front suspension. Simple ball-connected steering knuckle promises reliable control movement. Interchangeable on both front and rear left-right hub carriers optimize spare parts utilization and improve maintenance efficiency. Includes choice of two offset brake disc wheel hubs with dummy calipers (for visual styling) that provide compatibility with 190mm and 200mm body widths. Oil shocks mark an evolutionary step up from previous models Oil shock is newly designed. Optimal front-rear geometry and balance simultaneously delivers both light handling and precise control. Standard spur and pinion gear setting is 68T and 32T, but 9 pinion gear settings can be used from 29T – 37T to produce a wide range of gear ratio settings. The new fixed gear mesh motor mount has holes for use with each different pinion gears. Just simply mount the motor directly to the hole locations corresponding to the pinion gear. No gear mesh adjustment is necessary. Technical Data ■Length 500mm ■Width 211mm(Body width * excluding mirror) ■Height 130mm ■Wheelbase 274mm ■Tread (F/R) 167mm ■Tires (F/R) φ64×27.7mm ■Gear Ratio 6.54：1 ■Weight  1650g (approx.) ■R/C system Syncro KT-231P+ ■Motor G14L Kit Content ●Completed chassis with R/C radio installed ●Factory assembled body complete with color scheme ●Syncro KT-231P+ transmitter ●Hexagonal wrench ●Spanner ●Setting change parts Requirement to Run ●4 x AA batteries for transmitter ●Battery for chassis (recommended: 7.2V Ni-MH battery) ●Charger for battery for chassis ●Tools

3.995,-

4.295,-

KJØP
-7%
Hovedbilde Kyosho 34903T2B Trail King 1:12 Readyset EP Belt ... Hovedbilde Kyosho 34903T2B Trail King 1:12 Readyset EP Belt ...
Kyosho 34903T2B Trail King 1:12 Readyset EP Belt ...
Art.nr: 34903T2B
Copied
    Explore the outdoors with the all-season adventure model! The newest edition to the 1/12 scale electric belt vehicle series further enhances your outdoor experience. Kyosho’s long selling ‘Blizzard’ that has stood the test of time with a legion of loyal fans, has been used as a base for the new ‘Trail King’. Among its many features, a completely new body design creates the retro feel of a hard working machine. In addition to the realistic finish with separate accessory parts, the underbody incorporates a cockpit and always-on front and rear LED lights. A loading platform also provides space for a variety of things to be carried. The Trail King enhances the enjoyment of nostalgic wilderness experiences across a wide variety of scenes with a chassis boasting heavy-duty specifications for smooth and easy travel across any surface including uneven rocky roads and steep gradients. Take control with forward, reverse, left/right and the complete left/right pivot turning capability of a belt vehicle. As the model is fully pre-assembled, the advanced mechanics of the Trail King are ready to be enjoyed straight away. Compatibility with spare and optional parts for the Kyosho ‘Blizzard’ allows you to expand your enjoyment of the snow and sand adventures even further.   Technical datas ● Length　360mm ● Width　310mm ● Height　200mm ● Chassis Type　Chain drive ● Weight　1,610g (With attached battery) ● Motor　370size Brushed motor×2 ● Transmitter　KT-431S ● Receiver　KR-632   Ready set contents ● Completed chassis ● Completed chassis ● Transmitter(KT-431S) ● Receiver(KR-632) ● Battery for driving (KYOSHO SPEED HOUSE NiMH 2200) ● USB charger(Super plug type) ● Binding connector ● Tool(1.5mm Hex wrench)   Required for operations ● 4 x AAA batteries for the transmitter

Hovedbilde Kyosho 87033-02B Mini-Z Grand Prix Circuit30 Large ... Hovedbilde Kyosho 87033-02B Mini-Z Grand Prix Circuit30 Large ...
Kyosho 87033-02B Mini-Z Grand Prix Circuit30 Large ...
Art.nr: 87033-02B
Copied
Kyosho Mini-Z Grand Prix Circuit30 Large Corner Set (12pcs) 87033-02B   This is an expansion set for the Kyosho 30×30 tiles. It includes 2 big corners, made up of 12 tiles in total. Enhance your racing experience with our premium expansion sets, perfect for your Kyosho Mini-Z 30×30 circuit! These expansion sets provide you with endless possibilities to customize your track, allowing for new twists and turns, exciting challenges, and a variety of configurations to suit your racing style. Whether you’re a seasoned racer or just starting out, these sets are designed to be easy to assemble and integrate seamlessly with your existing circuit. The durable materials ensure long-lasting fun and excitement, making them a great investment for any racing enthusiast. Customize your racing experience today and feel the adrenaline rush of new adventures on your personalized track!   Kyosho Mini-Z 30×30 Expansion Track Take your racing experience to the next level with the Kyosho Mini-Z 30×30 Expansion Track. Designed for enthusiasts and hobbyists alike, this expansion track offers a seamless integration with your existing Mini-Z raceway, providing endless possibilities for challenging layouts. Features: • Track Compatibility: Designed to fit seamlessly with existing Mini-Z tracks, ensuring smooth transitions and a stable racing surface. • Track Durability: Constructed from high-quality, durable materials that can withstand fast-paced racing and require minimal maintenance. • Track Customization: Offers easy assembly and disassembly, allowing for modifications to create unique track layouts and racing experiences.   Whether you are hosting a competitive race or just enjoying a casual racing session with friends, the Kyosho Mini-Z 30×30 Expansion Track is an essential addition to your Mini-Z collection, offering expanded opportunities for thrilling racing adventures.

1.490,-

1.590,-

KJØP
-6%
Hovedbilde Kyosho Autoscale Mini-Z Honda Neo Classic Racer Body ... Hovedbilde Kyosho Autoscale Mini-Z Honda Neo Classic Racer Body ...
Kyosho Autoscale Mini-Z Honda Neo Classic Racer Body ...
Art.nr: MZP453GM
Copied
MZP453GM ASC MA-020-N Honda Neo Classic Racer Honda Neo Classic Racer Mini-Z Autoscale body. Fits MA-020-N Wheelbase: 94mm (L) Wheel Offset: F:N+1.5 / R:N+1.5 Genuine Kyosho Auto Scale Bodies. * This product is a spare body set and cannot be run. To enjoy driving as an RC model, please purchase a ready set.

769,-

799,-

KJØP
-4%
Hovedbilde KYOSHO CARRYING BAG MINI-Z BAG (280X200X75MM) Hovedbilde KYOSHO CARRYING BAG MINI-Z BAG (280X200X75MM)
KYOSHO CARRYING BAG MINI-Z BAG (280X200X75MM)
Art.nr: MZW121C
Copied
KYOSHO CARRYING BAG Mini-Z BAG

439,-

469,-

KJØP
-6%
Hovedbilde Kyosho FW06 Mercedes AMG GT3 2020 1:10 RC Nitro ... Hovedbilde Kyosho FW06 Mercedes AMG GT3 2020 1:10 RC Nitro ...
Kyosho FW06 Mercedes AMG GT3 2020 1:10 RC Nitro ...
Art.nr: 33214B
Copied
Kyosho FW06 Mercedes AMG GT3 2020 1:10 RC Nitro Readyset (KE15SP Proven shaft-driven 4WD chassis with Syncro KT-231P 2.4GHz R/C system! From beginner to race winner, this machine delivers smooth performance every time. User-friendly with mild control response, the FW-06 is the perfect introduction to GP touring cars and the performance of this amazing machine seems to evolve as your driving technique improves. 2-speed automatic transmission combines with the high-power KE15-SP engine to make full use of the power band and maximize performance from KYOSHO's proven shaft-driven 4WD chassis. With the same rear suspension as the World Champion V-ONE RRR with setting options and maintenance-friendly features only available on the latest racing machines, the FW-06 chassis also meets the demands of expert-level drivers. All this performance is packed into a fully-assembled Readyset. Equipped with the 2.4GHz Syncro KT-231P transmitter, finding an open frequency is a problem of the past. In addition to the dual-rate function, the KT-231P also features a failsafe function that automatically reduces the throttle if radio signal is interrupted. Simply switch the power on and you can be on the track and clocking race-winning times straight away.   ●Loaded with KE15-SP engine with slide carburetor fitted with slow idle adjustment and return spring. ●Reliable universal swing shafts included on front. ●Turnbuckle tie-rods used for steering rod and rear upper arms for fully adjustable alignment. ●KYOSHO's proven center-shaft drive 4WD provides light control response. ●Disk brakes deliver reliable and responsive braking control. ●Unique compact recoil starter without one-way clutch realizes lower resistance and starts the engine with a pull on the starter cord. ●Equipped with a total of 22 ball bearings for highly-efficient, full-bearing specification. ●Fitted with tuned muffler and large air cleaner. ●High-grip rubber tires with inner sponge supports are pre-glued onto wheels. ●Compatible with many FW-05 parts. *Not compatible with some parts.   ■Length 372mm ■Width 200mm ■Height 100mm (approx.) ■Ground Clearance 5mm ■Wheelbase 258mm ■Tread (F/R) 176mm ■Tire(F/R) F64×24mm ■Gear Ratio 7.47 / 5.44:1 ■Weight 1,800g (approx.) ■Engine KE15SP with recoil starter Kit Contents: ●Fully-assembled chassis complete with pre-set control linkages ●Pre-mounted KE15-SP engine with recoil starter ●Special manifold and muffler ●Finished pre-cut body complete with paint and stickers applied ●Syncro KT-231P transmitter Required Operation: ●8 x AA-size alkaline batteries for R/C system ●Fuel

Hovedbilde Kyosho Inferno MP10 1:8 RC Nitro Readyset T1 Red ... Hovedbilde Kyosho Inferno MP10 1:8 RC Nitro Readyset T1 Red ...
Kyosho Inferno MP10 1:8 RC Nitro Readyset T1 Red ...
Art.nr: 33025T1B
Copied
Experience top-end performance With the convenience of a Readyset!     Experience top-end performance With the convenience of a Readyset! With its unrivalled record of success including eight World Championship victories, the Kyosho Inferno series is synonymous with 1/8 scale GP buggy racing. Making its debut in 2023, the latest MP10 TKI3 delivers speed in its purest form. The Readyset specifications feature a comprehensive upgrade from the MP9 base to the new MP10. Increased thickness of the rear shock stays for greater strength and rigidity absorb shocks from the road surface. Oil shocks feature precision aluminum cases and work beautifully with the same shock springs used in the latest MP10 TKI3. The Readyset includes body with the same specifications as the MP10 TKI2 that delivers exceptional stability, however as this machine is compatible with all existing Inferno bodies, running characteristics can be changed with different bodies. The KE21SP engine fitted with recoil pull starter for easy starting comes with a break-in ring that makes it easier to break-in the engine in the early stages of use, and is ideal for circuit racing. Equipped with similar polished muffler and manifold as pure racing models, you can enjoy the sweet exhaust note as you rip around the track. The pre-installed R/C system in the Readyset features a new high-torque waterproof steering servo to handle the punishment of hard off-road driving with great control. Although packaged as a Readyset for entry-level users, the MP10 has the potential to compete at the highest level in the hands of expert drivers. ●Pre-assembled Inferno MP10 Readyset of the 1/8 scale buggy boasts an unrivalled big race record including World Championship victories. ●Includes everything except transmitter/receiver batteries and engine starting tool. Enjoy driving straight "out of the box". ●Proven shaft type 4WD delivers exceptional speed and reliability with the exceptional traction stability of 4WD.  ●Equipped with KE21SP engine fitted with recoil starter so even beginners can easily start the engine. ●Large-capacity air cleaner extends the engine maintenance cycle and reduces the frequency of air cleaner replacement. ●Equipped with the same 3-piece type clutch as racing models. ●Forward mounting of heavy objects optimizes front-to-rear weight balance to realize more direct maneuverability for superior driving control. ●Includes Inferno MP10 TKI2 body with excellent aerodynamics that delivers superior stability through high speed corners. ●Features new waterproof high-torque servo that greatly improves steering and throttle feel. ●Includes 2.4GHz KT-331P pistol-grip transmitter with LCD screen for various setting adjustments. ●Newly developed springs for the long diaphragm front and rear oil shocks deliver reliable consistency. ●Wide range of suspension settings are possible with bushes used with suspension shaft mounts. ●Enjoy tuning up your machine with a wide variety of optional Inferno parts. World-beating Inferno MP10 series DNA runs rich through this fully-assembled chassis to deliver an optimal balance of competition-level performance and sports driving. Oil shocks with metal cases are equipped as standard and deliver precision function with reliable consistency. Includes the same specification coil springs developed for the 2022 GP Buggy World Championship. Rear shock stay thickness increased to 5mm and works in combination with the existing 5mm metal front shock stay to provide robust crash resistance and high rigidity for maximum performance from shocks and springs. Equipped with the 3.5cc KE21SP engine featuring the same rear exiting exhaust as racing engines. This engine produces awesome power and is easy for anyone to start. The engine features polished muffler and manifold similar to competition-level models and is fitted with a recoil starter that kicks into life with a simple pull on the starter cord. Same shape body as the Inferno MP10 TKI2 is finished and mounted on the MP10. Advanced aerodynamics contribute to improved rear grip and outstanding stability even through high-speed corners. Comprehensive low center of gravity design is built for off-road performance but also excels on a wide range of surfaces from rough roads to race circuits. Further tuning and upgrading to advanced models is also possible. Newly developed high-torque steering servo optimal for heavy 1/8 GP buggies is pre-installed and adjusted on the chassis. The receiver is equipped with a fail-safe function in the event of frequency interruption. K-Blox tires are pre-glued to the wheels and included as standard to deliver exceptional grip on dirt as well as asphalt surfaces such as parking lots.

7.795,-

7.995,-

KJØP
-3%
Hovedbilde Kyosho Inferno MP10e 1:8 RC Brushless EP Readyset 2026 Hovedbilde Kyosho Inferno MP10e 1:8 RC Brushless EP Readyset 2026
Kyosho Inferno MP10e 1:8 RC Brushless EP Readyset 2026
Art.nr: 34113T1S
Copied
Powerful racing buggy easy to enjoy with this is EP Readyset! The worldwide status of the 1/8 scale buggy category has been built on a combination of high speed and dynamic fun. In recent years, EP (electric) buggies powered by batteries and electric motors have grown in popularity. Based on its celebrated 1/8 GP Inferno series buggy, Kyosho releases the electric powered Inferno MP10e Readyset! The new MP10e features significant updates but inherits the Inferno MP9e Evo. V2’s optimal weight balance from its left-right battery distribution that became adopted widely in 1/8 EP buggy designs. This layout also allows easier maintenance. Output characteristics of the KV2300 motor can be programmed on BRAINZ 8 ESC (electronic speed controller). With the R/C system pre-installed, you can be driving after unpacking the model and charging the battery. Equipped with the newly developed high torque and waterproof KS5071-09MW steering servo, the MP10e can handle the heavy loads of hard off-road driving. The cornerstone of the MP10e’s high performance and reliability is the suspension system, which is similar to the Inferno MP10 GP model. Not only can you outrun GP models with the Inferno MP10e; this high-powered electric machine is packaged as a Readyset with the racing potency to succeed at the highest level. ●Pre-assembled Readyset of the world-famous 1/8 scale buggy ●4WD shaft system makes full use of the brushless motor power and demonstrates exceptional traction stability. ●Forward mounting of heavy objects optimizes front-to-rear weight balance to realize more direct maneuverability. ●Includes pre-painted Inferno MP10e body with excellent aerodynamics that delivers superior stability through high speed corners. ●New servo and brushless motor with proven reliability provides the optimal combination of high-performance with the easy operation of electric power. ●Includes 2.4GHz KT-331P pistol-grip transmitter with LCD screen for various setting adjustments. ●Newly developed springs for the long diaphragm front and rear oil shocks deliver reliable consistency. ●Wide range of suspension settings are possible with bushes used with suspension shaft mounts. ●Enjoy tuning up your machine with a wide variety of optional Inferno parts. ●Standard R/C car tube battery and square type battery for the motor (sold separately) can be mounted.   Forward weight distribution realizes direct responsiveness for compliant maneuverability. Features fully assembled chassis equipped with powerful brushless motor unit and R/C system.     Oil shocks with metal cases are equipped as standard and deliver precision damping function with ultra-reliable consistency. Includes the same specification coil springs developed for the 2022 GP Buggy World Championship.     5mm metal front and rear shock stays provide robust crash resistance and the high rigidity to extract maximum effectiveness from shocks and springs.     High-power TORX 8+ brushless motor produces easy acceleration of the heavy chassis. Sliding motor mount allows easy adjustment of gear backlash.     The ESC (left) is a BRAINZ 8 that can withstand high loads and has 10 output programs to choose from. The receiver (right) is housed in a special case to protect it from dirt and damage caused by dirt and dust.     Newly developed high-torque steering servo is optimal for heavy 1/8 EP buggies. The receiver is equipped with a fail-safe function in the event of frequency interruption.     Wire guard neatly organizes the R/C system wiring on the chassis and is effective in preventing damage caused by wires getting caught in gears and other drive system parts.     Battery holder is compatible with most commonly available R/C car battery types. Simple hook-and-loop fastener allows battery to be easily secured and detached.     Same shape body as the Inferno MP10e kit is finished and mounted on the MP10e. Advanced aerodynamics contribute to improved rear grip and outstanding stability even through high-speed corners.     K-Blox tires are pre-glued to the wheels and included as standard to deliver exceptional grip on dirt as well as asphalt surfaces such as parking lots.

7.495,-

8.495,-

KJØP
-12%
Hovedbilde Kyosho KB10L Toyota Tacoma TRD Pro Elec Lime VE 3S 4WD ... Hovedbilde Kyosho KB10L Toyota Tacoma TRD Pro Elec Lime VE 3S 4WD ...
Kyosho KB10L Toyota Tacoma TRD Pro Elec Lime VE 3S 4WD ...
Art.nr: 34703T2B
Copied
Nyt kraftig pickup-ytelse i realistisk 1/10-skala!   Med robuste dekk og understell for å håndtere ulendt terreng og et stort lasteplan bak, er pickuper etterspurt i hele Nord-Amerika, Sørøst-Asia, Afrika og Australia, og mange populære pickuper har blitt gjenskapt som R/C-modeller. Toyota utviklet Tacoma hovedsakelig for det nordamerikanske markedet, og den har fortsatt å selge godt siden utgivelsen i 1995. Denne modellen er basert på 3. generasjon Tacoma som først fikk stor anerkjennelse i 2016 på grunn av sin aggressive stil og praktiske egenskaper. Toppen av serien Tacoma TRD Pro har blitt gjenskapt av Kyosho med et tøft 1/10-skala chassis i en Readyset-pakke. Kyoshos støpehåndverk gjengir TRD Pro-kroppen plettfritt i lett, men stiv polykarbonatharpiks med styrke for hard terrengkjøring. Basert på offroad KB10-chassiset passer den lange akselavstanden og den korte slitebanen til KB10L-chassiset perfekt til karosseriet. Det akseldrevne 4WD-systemet overfører pålitelig kraften til den børsteløse TORX10L-motoren for å nå topphastigheter på rundt 75 km/t under ledelse av ESC (Electronic Speed Control) og et kompatibelt 3S (11.1V) lipo-batteri. Denne praktiske Readyset-pakken inneholder moroa fra en ultraskala pickup på et dynamisk terrengchassis med en finish som i kvalitet ligner på premium-modeller som kun er skjermet. ●Readyset inkluderer R/C-system forhåndsinstallert på chassiset og en pistolgrepssender. ●Forhåndsmalt og montert "Toyota Tacoma TRD Pro" ultraskala karosseri fanger fullt ut formen til den originale lastebilen. ● Nydesignede kroppsfester skjuler kroppsstifter fra utsiden for å realisere en høyere skalafølelse. ●LED-lys (selges separat) kan festes til lysbøttene foran og bak. Skalafølelsen forsterkes ytterligere når 4 lys foran og 2 baklys (4 hvis ryggelys er installert) lyser fullt ut. Anbefalt: 4 lys foran, 2 baklykter (97054-4CR x 1, 97054-2B x 1) / Med reverslys, 4 lys foran, 4 baklykter (97054-4B x 1, 97054-4CR x 1) ●Fulltids 4WD KB10L-chassis kan håndtere røffe veier så vel som på vei og flatt skitt. ●Batteriholder kompatibel med 3S-batterier. Batteriet er festet med et belte som er lett å ta av og på. ●Inkluderer kraftig TORX 10L børsteløs motor og vanntett BRAINZ 10 + børsteløs ESC. ●3 differensialdesign for forbedret løpsstabilitet. Olje #10000 er forhåndsfylt i senterdiff og #5000 olje foran og bak. ●Fulle kulelager (22) utstyrt for optimal driveffektivitet og holdbarhet. ●Hvert gir, mottaker er innelukket i en forseglet boks for å forhindre kompromisser fra sand og skitt under kjøring. ●Pistolgrep type Syncro KT-231P+ sender inkludert muliggjør ulike innstillingsendringer. ●Batterilader og batteri for chassis pluss 4 x AA-batterier for sender må kjøpes separat. Den lave og brede formen på polykarbonatkroppen er ulastelig gjenskapt med den unike TRD Pro frontgrillen og lette bøtter for å forbedre den tredimensjonale effekten. Slitesterk 1,5 mm PC-kropp. Karosserifester foran og bak sikrer karosseriet fra under chassiset (bildet viser fronten) slik at skalaens utseende ikke kompromitteres av synlige karosseristolper eller pinner på utsiden av karosseriet. Basert på 1/10-skalaen Mad Wagon bush-basher offroad-chassis, har KB10L en utvidet akselavstand og forkortede fjæringsarmer med stabiliteten til akseltypen 4WD. 4WD-system av akseltype med girkasse med senterdifferensial reduserer motorrotasjonen for optimal kraftoverføring til for- og bakhjul. Nytt langt aluminiumchassis gir pålitelig trekkraft selv på overflater med lite grep. Oljedempere demper tilbakemeldinger fra veibanen pålitelig for å stabilisere chassiset under kjøring. Forhåndsmonterte støtdempere er forhåndsfylte med olje og fjærhastighet (hardhet) er optimert for KB10L-chassiset. Sperrestenger på fjæring og styring gjør det enkelt å justere camber- og tåvinkelen. Teleskopiske universalaksler i harpiks er utskiftbare mellom foran og bak for deler og vedlikeholdseffektivitet. Nylig vedtatt senterdifferensial i KB10L-chassiset optimerer kraftfordelingen til for- og bakhjul gjennom hjørner for jevn svingytelse. IF245 cylindrisk stålhjul for 1/8-skala buggy Inferno NEO-serien kan installeres som en valgfri del.(Et BRG005-lager kreves separat.) Utstyrt med sintrede metall 4-fasede differensialgir foran og bak med kapasitet til å håndtere høyeffekts børsteløse motorer. IS117 hardt vinkelgir fra 1/8-modellen Inferno NEO ST 3.0 kan installeres som en valgfri del.(BRG005-lager kreves separat.) Nydesignede hjul og dekk viser overlegent grep, både på og terreng. Dekkmønster og hjuldesign gjenskaper den faktiske kjøretøystilen for en full følelse av skalarealisme.   TEKNISKE DATA ■Lengde 572mm ■Bredde 274mm ■Høyde 214mm ■Akkullavstand 340mm ■Slitebane F/R 224mm ■Dekk（F & R） φ110 x 47 mm ■Girforhold 10.41:1 ■Vekt 3410 g (ca.) ■Motor TORX10L Børsteløs Motor kv2850   ●Fabrikkmontert chassis ●Forkuttet og malt kropp komplett med dekaler påført ●2,4GHz Syncro KT-231P+ sender ●1,5 mm/2,0 mm/2,5 mm L-formede sekskantnøkler ●Kvernøkkel ●4/5/5,5/7/10mm Integrert skiftenøkkel   Nødvendig for drift ● AA-batterier x 4 for sender ●Batteri for kjøring (2-3S LiPo batteri *Installerbart batteri størrelse 143x47x30mm) ●Lader for LiPo-batteri   English text:   Enjoy powerful pickup truck performance in realistic 1/10 scale!   With rugged tires and undercarriage to handle rough terrain and a large rear cargo bed, pickup trucks are in high demand throughout North America, Southeast Asia, Africa, and Australia and many popular pickup trucks have been recreated as R/C models. Toyota developed the Tacoma mainly for the North American market and it has continued to sell well since its release in 1995. This model is based on the 3rd generation Tacoma which first appeared to much acclaim in 2016 due to its aggressive styling and practicality. The top of the range Tacoma TRD Pro has been recreated by Kyosho with a tough 1/10 scale chassis in a Readyset package. Kyosho’s molding craftmanship immaculately reproduces the TRD Pro body in lightweight but rigid polycarbonate resin with the strength for hard off-road driving. Based on the off-road KB10 chassis, the long wheelbase and short tread of the KB10L chassis matches the body perfectly. The shaft-driven 4WD system reliably transfers the brute power of the TORX10L brushless motor to reach top speeds of about 75km/h under the management of the ESC (Electronic Speed Control) and a compatible 3S (11.1V) lipo battery. This convenient Readyset package contains the fun of an ultra-scale pickup truck on a dynamic off-road chassis with a finish similar in quality to premium display-only models. ●Readyset includes R/C system pre-installed on the chassis and a pistol-grip transmitter. ●Pre-painted and assembled "Toyota Tacoma TRD Pro" ultra-scale body fully captures the form of the original truck. ●Newly designed body mounts conceal body pins from the outside to realize a higher sense of scale. ●LED lights (sold separately) can be attached to the front and rear light buckets. The scale feeling is further enhanced when 4 front lights and 2 rear lights (4 if reverse lights installed) are fully lit. Recommended: Front 4 lights, Rear 2 lights (97054-4CR x 1, 97054-2B x 1) / With reverse lights, Front 4 lights, Rear 4 lights (97054-4B x 1, 97054-4CR x 1) ●Full-time 4WD KB10L chassis can handle rough roads as well as on-road and flat dirt. ●Battery holder compatible with 3S size batteries. The battery is fixed with a belt that is easy to take off and on. ●Includes powerful TORX 10L brushless motor and waterproof BRAINZ 10 + brushless ESC. ●3 differential design for enhanced running stability. #10000 oil is pre-filled in the center diff and #5000 oil in the front and rear diffs. ●Full ball bearings (22) equipped for optimal drive efficiency and durability. ●Each gear unit, receiver are enclosed in a sealed box to prevent compromise from sand and dirt while driving. ●Pistol grip type Syncro KT-231P+ transmitter included allows various setting changes. ●Battery charger and battery for chassis plus 4 x AA batteries for transmitter must be purchased separately. Low & wide shape of the polycarbonate body has been immaculately recreated with the unique TRD Pro front grill and light buckets to enhance the 3-dimensional effect. Durable 1.5mm PC body. Body mounts on front and rear secure the body from under the chassis (photo shows front) so scale appearance is not compromised by exposed body post or pins on the outside of the body. Based on the 1/10 scale Mad Wagon bush-basher off-road chassis, the KB10L has an extended wheelbase and shortened suspension arms with the stability of the shaft-type 4WD. Shaft-type 4WD system incorporating gearbox with center differential reduces motor rotation for optimal power transfer to front and rear wheels. New long aluminum chassis produces reliable traction even on low-grip surfaces. Oil shocks reliably attenuate feedback from the road surface to stabilize the chassis while driving. Pre-mounted shocks are pre-filled with oil and spring rate (hardness) has been optimized for the KB10L chassis. Turnbuckle rods on suspension and steering make it easy to adjust the camber and toe angle. Telescoping resin universal shafts are interchangeable between front and rear for parts and maintenance efficiency. Newly adopted center differential in the KB10L chassis optimizes power distribution to front and rear wheels through corners for smooth turning performance. IF245 steel spur gear for the 1/8 scale buggy Inferno NEO series can be installed as an optional part.(One BRG005 bearing is required separately.) Equipped with sintered metal 4-bevel differential gears on the front and rear with the capacity to handle high-power brushless motors. IS117 hard bevel gear from the 1/8 model Inferno NEO ST 3.0 can be installed as an optional part.(BRG005 bearing is required separately.) Newly designed wheels and tires demonstrate superior grip, both on and off-road. Tire pattern and wheel design replicate the actual vehicle style for a full sense of scale realism.   ■Length 572mm ■Width 274mm ■Height 214mm ■Wheelbase 340mm ■Tread F/R 224mm ■Tires（F & R） φ110 x 47mm ■Gear Ratio 10.41:1 ■Weight 3,410g (approx.) ■Motor TORX10L Brushless Motor kv2850  

7.395,-

8.495,-

KJØP
-13%
Hovedbilde Kyosho KB10L Toyota Tacoma TRD Pro Lunar Rock VE 3S ... Hovedbilde Kyosho KB10L Toyota Tacoma TRD Pro Lunar Rock VE 3S ...
Kyosho KB10L Toyota Tacoma TRD Pro Lunar Rock VE 3S ...
Art.nr: 34703T1
Copied
Nyt kraftig pickup-ytelse I realistisk skala 1/10! Med robuste dekk og understell for å håndtere ulendt terreng og et stort lasteplan bak, er pickuper etterspurt i hele Nord-Amerika, Sørøst-Asia, Afrika og Australia, og mange populære pickuper har blitt gjenskapt som R/C-modeller. Toyota utviklet Tacoma hovedsakelig for det nordamerikanske markedet og den har fortsatt å selge siden utgivelsen i 1995. Disse modellene er basert på 3. generasjon Tacoma som først fikk stor anerkjennelse i 2016 på grunn av sin aggressive stil og praktiske egenskaper. Toppen av serien Tacoma TRD Pro har blitt gjenskapt av Kyosho med et tøft 1/10-skala chassis i en Readyset-pakke. Kyoshos støpehåndverk gjengir TRD Pro-kroppen plettfritt i lett, men stiv polykarbonatharpiks med styrke for hard terrengkjøring. Basert på offroad KB10-chassiset passer den lange akselavstanden og den korte slitebanen til KB10L-chassiset perfekt til karosseriet. Det akseldrevne 4WD-systemet overfører rundt. pålitelig kraft til den børsteløse TORX10L-motoren for å nå topphastigheter på 75 km/t under av ESC (Electronic Speed Control) og et kompatibelt 3S (11.1V) lipo-batteri Denne praktiske Readyset-pakken inneholder moroa fra en ultraskala pickup på et dynamisk terrengchassis med en finish som i kvalitet ligner på premium-modeller som kun er skjermet. ●Readyset inkluderer R/C-system forhåndsinstallert på chassiset og en pistolgrepsender. ●Forhåndsmalt og montert "Toyota Tacoma TRD Pro" ultraskala karosseri fanger fullt ut formen til den originale lastebilen. ● Nydesignede kroppsfester skjuler kroppsstifter fra utsiden for å realisere en høyere skalafølelse. ●LED-lys (selges separat) kan festes til lysbøttene foran og bak. Skalafølelsen forsterkes ytterligere når 4 frontlykter og 2 baklykter (4 hvis tåkebaklys er installert) lyser fullt ut. Anbefalt: 4 lys foran, 2 baklykter (97054-4CR x 1, 97054-2B x 1) / Med tåkelys bak, 4 lys foran, 4 baklykter (97054-4B x 1, 97054-4CR x 1) ●Fulltids 4WD KB10L-chassis kan håndtere røffe veier så vel som på vei og flat skitt. ●Batteriholder kompatibel med 3S-batterier. Batteriet er festet med et belte som er lett å ta av og på. ●Inkluderer kraftig TORX 10L børsteløs motor og vanntett BRAINZ 10 + børsteløs ESC. ●3 differensialdesign for forbedret løpsstabilitet. Olje #10000 er forhåndsfylt i senterdiff og #5000 olje foran og bak. ●Full kulelager (22) utstyrt for optimal driveffektivitet og holdbarhet. ●Hver girenhet, mottaker er innelukket i en forseglet boks for å forhindre kompromisser fra sand og skitt under kjøring. ●Pistolgrep type Syncro KT-231P+ avsender inkludert muliggjør ulike innstillingsendringer. ●Batterilader og batteri for chassis pluss 4 x AA-batterier for sender må kjøpes separat. Lav og avlet form på polykarbonatkroppen er ulastelig gjenskapt med den unike TRD Pro frontgrillen og lett bøtter for å forbedre den 3-dimensjonale effekten. Holdbart 1,5 mm PC-hus. Karosserifester foran og bak fester karosseriet fra under chassiset (bildet viser fronten) slik at skalaens utseende ikke kompromitteres av synlige karosseristifter på utsiden av karosseriet. Basert på 1/10-skalaen Mad Wagon bush-basher offroad-chassis, har KB10L og utvidet akselavstand og forkortede fjæringsarmer med stabilitet til akseltypen 4WD. 4WD-system av akseltype med girkasse med senterdifferensial reduserer motorrotasjonen for optimal kraftoverføring til for- og bakhjul. Nydesignet langt aluminiumchassis gir pålitelig trekkraft selv på overflaten med lite grep. Oljedempere demper tilbakemeldinger fra veibanen for å stabilisere chassiset under kjøring. Forhåndsmonterte støtdempere er forhåndsfylte med olje og fjærhastighet (hardhet) er optimert for KB10L-chassiset. Sperrestenger på fjæring og styring gjør det enkelt å justere camber- og tåvinkelen. Forlengbare universalaksler i harpiks på de nedre opphengsarmene er utskiftbare mellom foran og bak for deler og vedlikeholdseffektivitet. Nylig vedtatt senterdifferensial i KB10L-chassiset optimerer kraftfordelingen til for- og bakhjuls hjørner for jevn svingytelse. IF245 cylindrisk stålhjul for 1/8-skala buggy Inferno NEO-serien kan installeres som en valgfri del.(Et BRG005-lager kreves separat.) Utstyrt med sintrede metall 4-fasede differensialgir foran og bak med kapasitet til å håndtere høyeffekter børsteløse motorer. IS117 hardt vinkelgir for 1/8-modellen Inferno NEO ST 3.0 kan installeres som en valgfri del.(BRG005-lager kreves separat.) Nydesignede hjul og dekk viser overlegent grep, både på og terreng. Dekkmønster og hjuldesign gjenskaper den faktiske kjøretøystilen for en full følelse av skala. Nødvendig for drift ● AA-batterier x 4 for sender ●Batteri for kjøring (2-3S LiPo batteri *Installerbart batteri størrelse 143x47x30mm) ●Lader for LiPo-batteri   English text:   Enjoy powerful pickup truck performance In realistic 1/10 scale! With rugged tires and undercarriage to handle rough terrain and a large rear cargo bed, pickup trucks are in high demand throughout North America, Southeast Asia, Africa, and Australia and many popular pickup trucks have been recreated as R/C models. Toyota developed the Tacoma mainly for the North American market and it has continued to sell well since its release in 1995. This model is based on the 3rd generation Tacoma which first appeared to much acclaim in 2016 due to its aggressive styling and practicality. The top of the range Tacoma TRD Pro has been recreated by Kyosho with a tough 1/10 scale chassis in a Readyset package. Kyosho’s molding craftmanship immaculately reproduces the TRD Pro body in lightweight but rigid polycarbonate resin with the strength for hard off-road driving. Based on the off-road KB10 chassis, the long wheelbase and short tread of the KB10L chassis matches the body perfectly. The shaft-driven 4WD system reliably transfers the brute power of the TORX10L brushless motor to reach top speeds of about 75km/h under the management of the ESC (Electronic Speed Control) and a compatible 3S (11.1V) lipo battery. This convenient Readyset package contains the fun of an ultra-scale pickup truck on a dynamic off-road chassis with a finish similar in quality to premium display-only models. ●Readyset includes R/C system pre-installed on the chassis and a pistol-grip transmitter. ●Pre-painted and assembled "Toyota Tacoma TRD Pro" ultra-scale body fully captures the form of the original truck. ●Newly designed body mounts conceal body pins from the outside to realize a higher sense of scale. ●LED lights (sold separately) can be attached to the front and rear light buckets. The scale feeling is further enhanced when 4 front lights and 2 rear lights (4 if rear fog lights installed) are fully lit. Recommended: Front 4 lights, Rear 2 lights (97054-4CR x 1, 97054-2B x 1) / With rear fog lights, Front 4 lights, Rear 4 lights (97054-4B x 1, 97054-4CR x 1) ●Full-time 4WD KB10L chassis can handle rough roads as well as on-road and flat dirt. ●Battery holder compatible with 3S size batteries. The battery is fixed with a belt that is easy to take off and on. ●Includes powerful TORX 10L brushless motor and waterproof BRAINZ 10 + brushless ESC. ●3 differential design for enhanced running stability. #10000 oil is pre-filled in the center diff and #5000 oil in the front and rear diffs. ●Full ball bearings (22) equipped for optimal drive efficiency and durability. ●Each gear unit, receiver are enclosed in a sealed box to prevent compromise from sand and dirt while driving. ●Pistol grip type Syncro KT-231P+ transmitter included allows various setting changes. ●Battery charger and battery for chassis plus 4 x AA batteries for transmitter must be purchased separately. Low & wide shape of the polycarbonate body has been immaculately recreated with the unique TRD Pro front grill and light buckets to enhance the 3-dimensional effect. Dunable 1.5mm PC body. Body mounts on front and rear secure the body from under the chassis (photo shows front) so scale appearance is not compromised by exposed body pins on the outside of the body. Based on the 1/10 scale Mad Wagon bush-basher off-road chassis, the KB10L has an extended wheelbase and shortened suspension arms with the stability of the shaft-type 4WD. Shaft-type 4WD system incorporating gearbox with center differential reduces motor rotation for optimal power transfer to front and rear wheels. Newly designed long aluminum chassis produces reliable traction even on low-grip surfaces. Oil shocks reliably attenuate feedback from the road surface to stabilize the chassis while driving. Pre-mounted shocks are pre-filled with oil and spring rate (hardness) has been optimized for the KB10L chassis. Turnbuckle rods on suspension and steering make it easy to adjust the camber and toe angle. Extendable resin universal shafts on the lower suspension arms are interchangeable between front and rear for parts and maintenance efficiency. Newly adopted center differential in the KB10L chassis optimizes power distribution to front and rear wheels through corners for smooth turning performance. IF245 steel spur gear for the 1/8 scale buggy Inferno NEO series can be installed as an optional part.(One BRG005 bearing is required separately.) Equipped with sintered metal 4-bevel differential gears on the front and rear with the capacity to handle high-power brushless motors. IS117 hard bevel gear for the 1/8 model Inferno NEO ST 3.0 can be installed as an optional part.(BRG005 bearing is required separately.) Newly designed wheels and tires demonstrate superior grip, both on and off-road. Tire pattern and wheel design replicate the actual vehicle style for a full sense of scale.

7.395,-

8.495,-

KJØP
-13%
Hovedbilde Kyosho MINI-Z MA030 EVO CHASSIS SET (AWD - 8500KV) Hovedbilde Kyosho MINI-Z MA030 EVO CHASSIS SET (AWD - 8500KV)
Kyosho MINI-Z MA030 EVO CHASSIS SET (AWD - 8500KV)
Art.nr: 32180B
Copied
Kyosho MINI-Z MA030 EVO CHASSIS SET (AWD - 8500KV) New AWD chassis set with separate receiver unit to use with your choice of transmitter joins the EVO series lineup! The new AWD model MA-030EVO, based on the FWD MA-03F chassis, can use the separate receiver unit pioneered on the MR-03EVO (sold separately) The MINI-Z was originally designed with an integrated receiver, servo and speed controller, however on the MR-030EVO the receiver was designed to be purchased and installed as a separate unit to allow the model to be used with other makes of transmitter such as KYOSHO (KT18/EX-6/EX-6R/KT-531P/KT-432PT), KO (EX-2/EX-RR), Futaba (T7PX/T7XC/T4PM), Flysky (Noble NB4). In addition, the highest AWD series spec MA-020VE PRO included a 3-stage steering servo unit, but the new MA-030EVO includes the even higher spec 5-stage gear type from the MR-03. Also, a special CPU for servo control improves the control speed of positioning feedback and the updated control program delivers the best steering feel of any AWD model through improved responsiveness and linear response to driver control. The one-piece heatsink and aluminum case on the KYOSHO SPEED HOUSE XSPEED 85 (8500KV) brushless motor keeps it cool for optimal performance. The I.C.S. manager allows precision setting adjustments and also the switch to a brushed motor, which was not possible with previous chassis sets. Switch between drift and grip driving styles to experience the ultimate in AWD driving performance.   ●MA-030 AWD chassis is based on MINI-Z FWD MA-03F chassis. ●Chassis set comes with separate ESC and receiver unit. ●Includes KYOSHO SPEED HOUSE 85 brushless motor (KV8500). ●I.C.S manager enables precise setting control and use of either brushless or brushed motor. ●Independent CPU control with increased processing speed delivers even more precise control. ●Full ball bearing specifications reduces drive loss. ●Includes rear double wishbone suspension. ●Compatible with L（94mm） and LL（98mm） wheelbases. Only LL（98mm） can be used with rear double wishbone suspension set. ●Compatible with optional parts for the various MR-03F chassis models Remove the upper cover of the receiver on top of the chassis to install the receiver units compatible with KYOSHO, KO, FUTABA, and Flysky transmitters. Featuring high-performance VCS front suspension adopted from the previous models. Settings can be adjusted without using any tools just by replacing coil springs. Rear suspension includes the same strut type unit as the MA-03F chassis. Settings can be changed with toe control rods and cambered knuckles according to conditions. New Kyosho Speed House brushless XSPEED 85 (8500KV) motor features a one piece aluminum case that delivers efficient heat dissipation. Kit Contents     Assembled chassis with EVO main unit installed     Pinion gear (15T, 17T, 19T, 21T)     DWS conversion parts     Front width conversion parts     Spare wheel nuts and wrench     Center shaft for L wheelbase     Wide rear sus arms for DWS     Long swing shafts      Spur gears (27T, 29T, 31T)     Required For Operation MINI-Z EVO receiver unit compatible with the transmitter used Transmitter Auto Scale Collection (body, wheels and tires) 8 x AAA batteries Technical Data Scale:                                    1/27.6 Length:                                  126.0mm Width:                                     65.0 - 76.0mm (adjustable by wheel offset) Height:                                   36.0mm Chassis Type:                       MA-030 Wheelbase:                           94.0mm (strut rear suspension installed), 98.0mm (factory assembled) Weight:                                   135g Motor:                                      SpeedHouse Brushless 8500KV Gear Ratio:                             7.2, 6.4, 6.0, 5.7, 5.3, 5.0, 4.5:1 ＜Mountable Body＞ ・MAZDA Demio XD Touring(MZP442) ・Toyota PRIUS PHV(MZP443) ・Honda CIVIC Type R(MZP445) ・SUBARU WRX STI(MZP440) ・NISSAN GT-R R35(MZP417) ・NISSAN SKYLINE GT-R R32(MZP437) ・NISSAN SKYLINE GT-R R34(MZP427） ・AUDI R8 LMS(MZP444) ・NISSAN SKYLINE 2000GT-R KPGC10(MZP466) ・NISSAN SKYLINE GT-R R33(MZP468) ・CHEVROLET CAMARO ZL1(MZP242) ・SUBARU Impreza WRC 2008(MZP471) ・Toyota SPRINTER TRUENO AE86(MZP465) ・Toyota LEVIN AE86(MZP473) ・Toyota GR SUPRA(MZP450) ・Toyota GR SUPRA TRD(MZP452) Available with Wheel Change ・McLaren 12C GT3(MZP226) ・Lamborghini Murcirlago LP670-4SV(MZP215) ・McLaren F1 GTR(MZP237)　※DWS Not Compatible ・AUDI R8 LMS 2015/2016(MZP234) ・HONDA NSX(MZP233) ・McLaren P1 GTR(MZP235)　※DWS Not Compatible ・McLaren F1 GTR(MZP232)　※DWS Not Compatible ・CHEVROLET CORVETTE C8.R(MZP244) ・McLaren 720S GT3(MZP232)　※DWS Not Compatible(Mountable with Partial Diffuser Modification) ・TOYOTA 86(MZP155) ・HONDA NSX Concept-GT 2014(MZP249)

2.995,-

3.295,-

KJØP
-9%
Hovedbilde Kyosho MXB01GM BS MX-01 JEEP WRANGLER RUBICON Gray
Kyosho MXB01GM BS MX-01 JEEP WRANGLER RUBICON Gray
Art.nr: MXB01GM
Copied
MXB01GM BS MX-01 JEEP WRANGLER RUBICON Gray Granite Crystal Metallic Jeep Wrangler Rubicon autoscale body for Mini-Z 4X4.

699,-

KJØP
Hovedbilde Kyosho MXB03GR Bodyshell Suzuki Jimny Sierra Green ...
Kyosho MXB03GR Bodyshell Suzuki Jimny Sierra Green ...
Art.nr: MXB03GR
Copied
Bodyshell Suzuki Jimny Sierra Green Mini-Z 4X4 MX01

729,-

KJØP
Hovedbilde Kyosho MXN03 Bodyshell Suzuki Jimny Sierra Mini-Z 4X4 ...
Kyosho MXN03 Bodyshell Suzuki Jimny Sierra Mini-Z 4X4 ...
Art.nr: MXN03
Copied
Bodyshell Suzuki Jimny Sierra Mini-Z 4X4 MX01 (White Body)

429,-

KJØP
Hovedbilde Kyosho MZM443WP Bodyshell only Mini-Z Toyota Prius PHV ...
Kyosho MZM443WP Bodyshell only Mini-Z Toyota Prius PHV ...
Art.nr: MZM443WP
Copied
Bodyshell only Mini-Z Toyota Prius PHV White Pearl + 4WD Wheels

399,-

KJØP
Hovedbilde Kyosho MZN190 McLaren P1 GTR White body set(w/Wheel)
Kyosho MZN190 McLaren P1 GTR White body set(w/Wheel)
Art.nr: MZN190
Copied
  Kyosho MZN190 McLaren P1 GTR White body set(w/Wheel) Unpainted McLaren P1 GTR body set for Mini-Z with wheels. Fits wide MM 98mm (LL)

399,-

KJØP
Hovedbilde Kyosho MZN193 Bodyshell Sauber Mercedes C9 Mini-Z + ...
Kyosho MZN193 Bodyshell Sauber Mercedes C9 Mini-Z + ...
Art.nr: MZN193
Copied
Kyosho MZN193 Bodyshell Sauber Mercedes C9 Mini-Z + 2WD Rims (White Body)

419,-

439,-

KJØP
-5%
Hovedbilde Kyosho MZP159OR MR-04N-RM Porsche 911 GT3 RS GT ... Hovedbilde Kyosho MZP159OR MR-04N-RM Porsche 911 GT3 RS GT ...
Kyosho MZP159OR MR-04N-RM Porsche 911 GT3 RS GT ...
Art.nr: MZP159OR
Copied
Body Overview: Kyosho Mini-Z MR-04N-RM Porsche 911 GT3 RS Body. This is a ready to install detailed body option for the MR-04N-RM platform chassis. This body is equally suited to use as a display model, or to give your existing model a face lift.    Includes: (1) Mini-Z MR-04N-RMW-LM Porsche 911 GT3 RS Body (1) Display Stand Box *Note: This product is a spare body set and cannot be run.

749,-

899,-

KJØP
-17%
Hovedbilde Kyosho MZP159S MR-04N-RM Porsche 911 GT3 RS GT Painted ... Hovedbilde Kyosho MZP159S MR-04N-RM Porsche 911 GT3 RS GT Painted ...
Kyosho MZP159S MR-04N-RM Porsche 911 GT3 RS GT Painted ...
Art.nr: MZP159S
Copied
Body Overview: Kyosho Mini-Z MR-04N-RM Porsche 911 GT3 RS Body. This is a ready to install detailed body option for the MR-04N-RM platform chassis. This body is equally suited to use as a display model, or to give your existing model a face lift.    Includes: (1) Mini-Z MR-04N-RMW-LM Porsche 911 GT3 RS Body (1) Display Stand Box *Note: This product is a spare body set and cannot be run.

749,-

899,-

KJØP
-17%
Hovedbilde Kyosho MZP245OR Autoscale Mini-Z McLaren 12C GT3 2013 ...
Kyosho MZP245OR Autoscale Mini-Z McLaren 12C GT3 2013 ...
Art.nr: MZP245OR
Copied
Autoscale Mini-Z McLaren 12C GT3 2013 Orange (W-MM)

759,-

KJØP
Hovedbilde Kyosho MZP245W Autoscale Mini-Z McLaren 12C GT3 2013 ...
Kyosho MZP245W Autoscale Mini-Z McLaren 12C GT3 2013 ...
Art.nr: MZP245W
Copied
Autoscale Mini-Z McLaren 12C GT3 2013 White (W-MM)

759,-

KJØP
Hovedbilde Kyosho MZX408R AUTOSCALE Mini-Z ALFA ROMEO BRERA RED ...
Kyosho MZX408R AUTOSCALE Mini-Z ALFA ROMEO BRERA RED ...
Art.nr: MZX408R
Copied
AUTOSCALE Mini-Z ALFA ROMEO BRERA RED (MA010)

599,-

KJØP
Hovedbilde MJX Hyper GO 14212 1/14 Truggy 4WD RTR Hovedbilde MJX Hyper GO 14212 1/14 Truggy 4WD RTR
MJX Hyper GO 14212 1/14 Truggy 4WD RTR
Art.nr: 14212
Copied
MJX Hyper GO 14212 1/14 Truggy 4WD Brushless RTR Liten i størrelse – stor på ytelse! MJX Hyper GO 14212 er en kompakt 1/14 4WD brushless truggy som byr på imponerende ytelse og solid hobbykvalitet. Med en toppfart på opptil 56 km/t, kraftig brushless-system, firehjulsdrift og drivverk med omfattende bruk av metalldeler får du svært mye RC-bil i et kompakt format. Med en lengde på bare 310 mm er Hyper GO 14212 liten nok til å brukes på områder hvor større 1/8- og 1/10-modeller fort blir upraktiske. Samtidig sørger store 94 mm dekk, god bakkeklaring og 4WD for at bilen takler grus, jord, gress og andre ujevne underlag. Kraftig brushless-system – opptil 56 km/t Bilen er utstyrt med en 2852 brushless motor og en E45P 45A brushless ESC som støtter både 2S og 3S LiPo. Som standard leveres bilen med et 7,4V 3000mAh 25C 2S LiPo-batteri, og med dette oppsettet kan bilen nå en oppgitt toppfart på opptil 56 km/t. Motoren har dessuten kjøleribbe i aluminium med aktiv kjølevifte, som bidrar til å holde temperaturen nede under hard kjøring. Drivverk med masse metalldeler Under karosseriet finner vi komponenter man normalt forbinder med langt større hobby-grade RC-biler. Hyper GO 14212 leveres blant annet med: Drivaksler i metall CVD-drivaksler i metall Transmisjonsgir i kromstål Differensial med metalldeler Komplett sett med kulelager Oljefylte støtdempere i aluminium Digital styreservo med metallgir Dette gir et robust drivverk med god presisjon og holdbarhet – spesielt viktig på en liten og rask 4WD-modell. Oljefylte aluminiumsdempere I stedet for enkle friksjonsdempere er 14212 utstyrt med ekte oljefylte støtdempere i aluminium foran og bak. Dette gir bedre kontroll over hjulbevegelsene og gjør bilen betydelig roligere og mer stabil over humper og ujevnt underlag. T3D 2,4 GHz radiosystem Den medfølgende T3D 2,4 GHz-senderen gir fullt proporsjonal styring og gass, slik at både hastighet og styreutslag kan kontrolleres presist. Rekkevidden er oppgitt til cirka 120 meter, og senderen har justeringsmuligheter for både styring og gass. Ekstra karosseri og reservedeler inkludert MJX har lagt ved uvanlig mye ekstrautstyr. Du får blant annet et ekstra ferdiglakkert karosseri, wheelie bar, bærearmer, demperfjærer, karosseriklips og verktøy. Bilen leveres RTR – Ready To Run, med både LiPo-batteri og USB-ladekabel. Det eneste du trenger i tillegg er 2 stk. AA-batterier til senderen. Høydepunkter 1/14 skala 4WD firehjulsdrift Opptil 56 km/t 2852 brushless motor E45P 45A brushless ESC ESC støtter 2S–3S LiPo Aktiv motorkjøling med kjøleribbe og vifte Oljefylte aluminiumsdempere Drivaksler og CVD-aksler i metall Gir i kromstål Differensial med metalldeler Komplett kulelageroppsett 19 g digital styreservo med metallgir Vanntett mottakerboks Store 94 mm dekk T3D 2,4 GHz radiosystem Ca. 120 meters rekkevidde 2S 3000mAh LiPo inkludert Ekstra ferdiglakkert karosseri inkludert Reservedeler og verktøy inkludert RTR – nesten alt du trenger følger med Tekniske spesifikasjoner Spesifikasjon Data Modell MJX Hyper GO 14212 Skala 1/14 Drift 4WD Motor 2852 Brushless Motoravkjøling Aluminium kjøleribbe med vifte Fartsregulator E45P 45A Brushless ESC Batteristøtte 2S–3S LiPo Toppfart Opptil 56 km/t Styreservo 19 g digital, metallgir Servokraft 2,2 kg/cm Radiosystem T3D 2,4 GHz Rekkevidde Ca. 120 meter Batteri 7,4V 3000mAh 25C LiPo Oppgitt kjøretid Ca. 13 minutter Oppgitt ladetid Ca. 330 minutter med USB-lader Støtdempere Oljefylte aluminiumsdempere Lengde 310 mm Bredde 225 mm Høyde 127 mm Akselavstand 198 mm Sporvidde 195 mm Dekkdiameter 94 mm Oppgitt vekt 1350 g Dette følger med MJX Hyper GO 14212 ferdigmontert RTR T3D 2,4 GHz sender 7,4V 3000mAh 25C LiPo-batteri USB-ladekabel Ekstra ferdiglakkert karosseri Bakvinge Wheelie bar Øvre og nedre bærearmer foran, venstre/høyre Ekstra demperfjærer 4 stk. karosseriklips Karosserifester 3 stk. L-formede unbrakonøkler Skrutrekker Bruksanvisning Du trenger i tillegg: 2 stk. AA-batterier til senderen. MJX Hyper GO 14212 passer spesielt godt for deg som ønsker en liten og lett håndterlig RC-bil uten å gi avkall på brushless-ytelse, oljedempere og et solid drivverk. Med 4WD, opptil 56 km/t og mye ekstrautstyr i esken er dette en svært komplett liten basher.

1.995,-

2.195,-

KJØP
-9%
Hovedbilde MST 532183F FXX 2.0 1/10 RWD 86RB KIT Hovedbilde MST 532183F FXX 2.0 1/10 RWD 86RB KIT
MST 532183F FXX 2.0 1/10 RWD 86RB KIT
Art.nr: MST-532183F
Copied
MST 532183F FXX 2.0 1/10 RWD 86RB KIT MST FXX 2.0 1/10 RWD Electric Shaft Driven Car Kit er ett drift-byggesett med bakhjulstrekk. Den gode FXX platformen gir veldig gode kjøreegenskaper, og med et sentrert tygdepunkt ligger den fint gjennom svingene. Bilen har blit designet for å oppnå større svingvinkel, som vil gi enda mer realistisk look i drifts. Følger med ulakkert 86RB-karosseri og hjul. Nødvendig tilbehør med elektronikk er listet opp under. Ved montering kan både motor og servo monteres forskjellig, motor kan festes med øvre eller nedre tyngdepunkt, og servo kan festes flatt eller stående.     Spesifikasjoner Lengde Bestemmes av karosseri Bredde 190mm Høyde Bestemmes av karosseri Akselavstand    257mm Caster Justerbar 12/14/16/18-grader Camber Justerbar 0 til -12 grader Dempertype Hydrauliske   Nødvendig tilbehør: Radio og mottaker Styreservo ESC/Regulator Motor Batteri og lader Pinion

3.895,-

3.995,-

KJØP
-3%
Hovedbilde MST 532188B RMX 2.0 E92 1/10 RWD EP Drift Kit Hovedbilde MST 532188B RMX 2.0 E92 1/10 RWD EP Drift Kit
MST 532188B RMX 2.0 E92 1/10 RWD EP Drift Kit
Art.nr: MST-532188B
Copied
MST 532188B RMX 2.0 E92 1/10 RWD EP Drift Kit MST RMX 2.0 1/10 RWD EP Drift Kit er ett drift-byggesett med bakhjulstrekk. Følger med ulakkert BMW E92-karosseri og hjul. Nødvendig tilbehør med elektronikk er listet opp under. Ved montering kan både motor og servo monteres forskjellig, motor kan festes med øvre eller nedre tyngdepunkt, og servo kan festes flatt eller stående.   Spesifikasjoner Lengde Bestemmes av karosseri Bredde 190mm Høyde Bestemmes av karosseri Hjulbvidde 257mm Caster Justerbar 6/8/10/12-grader Camber Justerbar 0 til -12 grader Dempertype    Hydrauliske Nødvendig tilbehør: Radio og mottaker Styreservo ESC/Regulator Motor Batteri og lader Pinion

3.595,-

3.895,-

KJØP
-8%
Viser 126 til 150 (av 1259 produkter)

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png