Hopp til innhold
Hjem / Radio/Servo/Motor / Motor og regulator / Børsteløs combo / Hobbywing børsteløs combo

Hobbywing børsteløs combo

Populært i denne kategorien

 
Hovedbilde Hobbywing 30404318 QuicRun Fusion SE FOC System ... Hovedbilde Hobbywing 30404318 QuicRun Fusion SE FOC System ...
Hobbywing 30404318 QuicRun Fusion SE FOC System ...
Art.nr: HW30404318
Copied
Hobbywing QuiqRun Fusion SE system for crawlere er et gjenomtenkt, vanntett, sensorbasert og plasseringsvennlig system hvor regulatoren er integrert i motoren. Kompatibelt med 2-3S lipo, leveres med XT60-batterikontakt. Størrelsen tilsvarer en 540-motor slik at systemet passer direkte inn i de aller fleste modeller. Fusion systemet kjennetegnes ved ekstremt stille gange og mye kraft/nøyaktighet ved lave turtall, perfekt for crawlere. Spesifikasjoner Passer for 1/10 Crawlere IP-grad IP-67 Strømtrekk Maks 40A kont. Batteri 2-3S lipo eller 6-9 cell NiMh Størrelse 36x58.1mm Aksling Diameter: 3.175mm / Lengde: 16.5mm Ledninger 14AWG 200mm Kontakt XT60 Vekt 201g inkl. ledning og kontakt Dette systemet oppdateres med LED Program Box   Hobbywing Fusion SE 1200KV The Fusion SE provides an integrated space-saving design for hobbyists. FOC powered with proven design heritage FOC has been a game changer for the crawling segm ent. The extreme efficiency operates at lower temps and provides extended runtimes. The nearly silent operation provides amazing power and response at all speeds while providing extremely low RPM control. Compared to normal brushless, FOC systems provide a dramatic increase in response and power delivery. The smart torque output control feature of the built-in FOC ESC ensures unmatched downhill and uphill driving. The ESC can automatically adjust the motor output to RPM to match the driver inputs. Intelligent Torque Output is a smart management system that allows the ESC to adjust the motor for inclines or descent under any load to match the throttle. U-matched hill-hold function With 8 levels of drag brake force (Power) and 9 levels of Drag Brake Rate, drivers can fine-tune their vehicle’s hill-holding power and general driving. Overall, drag brakes can be 2 times stronger than normal brushless setups. Designed for Durability Silicon rubber gaskets, electronic buttons, and quality hardware ensure a long life for the Fusion SE. Made to take the abuse and conditions of daily RC bashers. Ready for all weather and track conditions IP-67 waterproof rating ensures the Fusion SE has protection from water, dust, and about anything else that gets thrown at it. Designed to withstand all conditions time and time again. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Specifications: Type: 1/10 Brushless, Sensored, Waterproof (IP67) ESC & Motor Combo Cont./Peak Current: 40A Input Voltage: 2-3S Lipo/6-9 Cell NiMH BEC Output: 6V/7.4V @ 4A (6A peak) Motor KV: 1200KV Diameter/length of Motor: 36mm / 58.1mm Shaft diameter / exposed shaft length: 3.175mm / 16.5mm Motor Poles: 4 Firmware Upgrade: Not Supported Size: 36X58.1mm Weight: 201g (including wires & connectors) Application: 1/10 Rock crawlers Wires & Connectors: Input Wires: 14AWG-200mm Input Connectors: XT60 ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD Program Box: Not Supported OTA Programmer: Not Supported Program Port: Independent programming interface (switch position)

1.095,-

1.195,-

KJØP
-8%
Hovedbilde Hobbywing 38020318 XeRun AXE540L R2 - 2300KV Crawler ...
Hobbywing 38020318 XeRun AXE540L R2 - 2300KV Crawler ...
Art.nr: HW38020318/38020505
Copied
  Hobbywing AXE R2 Crawler ESC + AXE540 R2-2300KV Combo Set FOC (Field-oriented Control) for Super Linearity & High Torque & Extreme Silence New sensor technology has changed the feel, performance, and overall tune-ability of the new Axe ESC and Motor in ways some have never experienced. Field-oriented Control is the name of this new tech, and is something all new to the scale trail, rock racing, and RC world in-general. This new style of sensor allows extremely accurate control and sensing of the motor while maintaining extreme performance and reliability. The motor and ESC are able to match the RPM of the motor to your throttle position under all driving conditions. This greatly improves down hill driving giving this system the ability to drive down hill under complete control.FOC technology also makes the whole system extremely silent, the motor doesn't create the annoying PWM noise when it is running. Intelligent Torque Output & Speed Closed-loop Control for Easy Control Not just a new ESC and motor, the new FOC sensors, combined with Intelligent Torque output and closed loop speed control mean the ESC and motor will maintain the motor’s Torque level and RPM as the vehicles conditions change. Uphill, down hill, under load, you name it, your Axe system will do what you’re telling it to do. Battery Reverse Polarity Protection Hobbywing's AXE FOC Crawler system has been designed with a very unique feature protecting your ESC from damage caused by Battery Reverse Polarity, so no matter how many times you reverse the battery connections the AXE ESC and the paired motor are safe from damage. Applicable to All Weather & Track Conditions The IP-67 waterproof has been taken to a new level with the AXE System. Completely sealed ESC design with robust heatsink case design ensure the ESC is ready for anything you throw at it. The motor as well, is sealed and combines a completely new sensor harness. No messy extra steps to make your system water proof. Dual Running Mode AXE FOC Crawler system supports dual running mode, not only classic "Forward and Reverse (rock crawler)" mode, but also "Forward/Reverse with brake (normal)" mode, to satisfy your application. Professional Drag Brake Adjustments & Super Parking Capacity Drag brake rate, and drag brake tuning allows scalers to adjust not only the hill/hold/drag brake, but how quickly the brake applies. This allows high speed driving with out sudden jerks or stops when releasing the throttle. The drag brake itself is super charged, and able to be run at extremely high levels. Compared to a standard crawling brushless setup, the drag brake in the Axe System can be rated at 200% in comparison. Built-in Bluetooth for Connecting the Mobile APP Directly Built in Bluetooth connectivity means exactly that. The ESC has Blue Tooth built right in! Nothing extra is needed to access the ESC’s complete on board programming but your smart phone device and the Free Hobbywing App from your App Store. That’s right folks, the Bluetooth feature is BUILT INTO the ESC. No extra devices, wires or connections required! Please download the new version of V2 App. The old version of the APP is not supported. Download method is as follows: Android iOS: Look up in the APP Store: HW Link V2 Easy Obtain AXE Running Status with Real-time Data Recording Function Connect the HW Link cellphone APP to the ESC and open the real-time data recording function, to check the throttle, voltage, current, temperature, RPM and other data in real-time. Easy obtain running status of ESC and motor. Note: Due to transmission distance of bluetooth, the effective distance is about 3m! Super Internal BEC The built-in switch mode BEC with a maximum output of 13A and voltage adjustable between 6V and 7.4V allows the use of various standard servos, high voltage servos and other peripherals. Advanced and Secure Electronic Switch The dust, dirt, and waterproof switch housing ensures a long reliable life for your ESC, will not suffer from the problems most standard on/off switches encounter. Multiple Programmable Items With enough settings to keep your vehicle running “just right”, there are also timing/boost settings, just in case it’s not fast enough, this feature allows you to unleash some extra top speed from your Axe System. Sometimes the trails are long and winding, so more wheel speed is welcome! Only AXE R2 Motors! The XeRun AXE R2 Crawler ESC is not back-compatible with earlier AXE motors - It only works with the AXE R2 motors! ESC Specifications: Scale: 1/10th Type: Brushless/Sensored Waterproof: YES Cont./Peak Current: 80A/480A Input Voltage: 2-3S Lipo or 6-9 Cell NiMH BEC Switch Mode: 6A @ 6V/7.4V Input Wires: 14AWG 200mm Input Connectors: XT60 Output Wires/Connectors: Yes - only fits AXE R2 motors! ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Not Supported LCD Program Box: Not Supported WiFi Module: Not Supported Programming Port: Built-in bluetooth Firmware Upgrade: Supported ESC Size & Weight: Size: 47.4 x 36.2 x 26.5mm Weight: 108g (Including the weight of input wires) ESC Applications: Applications: The AXE R2 ESC only supports XERUN AXE R2 motors! Vehicles: 1/10 Rock Crawlers AXE540 R2 Motor Specs: Type: Brushless/Sensored Poles: 4 KV Rating: 2300 Cells: 2-3s LiPo No Load Current: 2.5A Outside Diameter: 36 mm Length: 57.8mm Shaft: 3.17mm Weight: 233g Application: Only supports the AXE R2 ESC Vehichles: 1/10 Rock Crawlers    

2.995,-

3.195,-

KJØP
-6%
Hovedbilde Hobbywing 38020389 XeRun AXE550L 3300KV Combo
Hobbywing 38020389 XeRun AXE550L 3300KV Combo
Art.nr: HW38020389
Copied
Hobbywing HW38020388 - AXE PLUS R3 ESC + AXE 550 R2 3300kV 2-3S Crawler Combo AXE PLUS R3 2-6S Crawler ESC 6S high-power crawler ESC: The ESC supports up to 6S LiPo battery It has a maximum output continuous current of up to 135A The AXE R3 can be used on 1/10th and 1/8 crawler, also compatible with 1/7 & 1/6 crawlers New compact design Compatible with all Axe R2 motors Note: The AXE R3 is 2.1mm longer, 1.7mm wider and 3.7mm shorter than the R2 ESC. Dual external control channels, real-time adjustment of parameters Connect the white and yellow signal cables to open channels of the receiver to adjust parameters in real time. FOC drive, linear, with plenty torque, and very quite The XeRun AXE R3 is equipped with a FOC drive system. The large torque and excellent linearity when operating at low speed further exceeds ordinary brushless power systems and out performs brushed power systems. The XeRun AXE R3 is nearly silent, and it’s the perfect choice for crawling vehicles. Smart torque output, easy to control The ESC automatically increases the torque output to overcome resistance and accelerate up the hill. Vice versa, the ESC automatically reduces the torque output and stabilizes the vehicle speed when going down the hill. Provides excellent control going Up, or Down hills. The ESC is powerful, with excellent linear control, which can meet the needs of the vehicle's low-speed climbing while also meeting the needs of violent start-up lifting, straight-line high speed, etc. Smart fan start and stop function The fan starts to operate automatically ONLY when the ESC temperature reaches the preset value. The smart start and stop function of the fan helps to save power, reduce noise, and also ensures that the ESC works in a good temperature range. High protection level The AXE R3 brushless system is now IP67 protected. It has excellent waterproofing and dust-proofing performance to cope with various climatic conditions. Note: The above-mentioned IP67 protection level is splash-proof, water-resistant, and dust-proof under normal use. It is not permanently effective, and the protective performance may decrease due to aging. Do not submerge in water for a long time, otherwise the product may be damaged. Super Internal BEC It has a built-in powerful BEC with a maximum output current of 15A. The voltage is switchable between 6V/7.4V/8.4V and is suitable for various standard/high-voltage servos and peripheral electrical equipment on the market (such as light sets, winches, etc.). Built-in Bluetooth for Connecting the Mobile APP Directly The ESC has a built-in Bluetooth module. Parameter settings, data reading, firmware upgrade and other operations can be achieved by connecting the device to the mobile APP. Obtain AXE Running Status with Real-time Data Function with ease Connect the ESC to the HW Link mobile app and turn on the real-time data function. You are able to view throttle, voltage, current, temperature, speed and other data in real time, and obtain the ESC and motor operating status with ease. Note: The effective distance is only about 5m due to transmission distance of bluetooth. Built-in data logging function, ease of obtaining power operating status The ESC has a built in data recording module. Store up to 10 minutes of your most recent run. Using the HW Link V2saved to the ESC. saved to the ESC. In addition, the module allows you to view Time Data from the ESC for bench top testing and viewing of the data outputs. Note: Due to transmission distance of bluetooth, the effective distance is only about 5m! Compatible with AXE R2 motors AXE R3 ESC supports both AXE 4274 R3, and AXE 550/540L/540 R2 motors. Note: AXE R2 motor, 2800KV/2100KV/1400KV/2300kv are recommended to use on 3-4S. Supports Flysky i-BUS2 Telemetry Achieve real-time ESC parameter adjustments using the I-BUS2 Telemetry on the Flysky NB4 controllers. Additionally, the data return function has been implemented to the Flysky NB4 remote controllers. You will be able to view data such as; battery voltage, motor speed, operating current, ESC/motor temperature, etc in real time on the remote control. Note: You are required to upgrade to the latest firmware on your remote control in order to use the I-bus2 functions. A vast variety of parameters The XeRun AXE R3 has a vast variety of parameters for adjustment. It has a total of 21 adjustable parameters and supports 24-degree adjustable Turbo timing. The maximum speed can be unleashed with good road conditions. ESC Specs: Scale: 1/10, 1/8, 1/7 & 1/6 Type: Brushless, sensored waterproof Crawler ESC Cont./Peak Current: 135A/600A Input Voltage: 2-6S LiPo (2-3S in this combo) BEC Output: Switch Mode 6V/7.4V/8.4V @6A Input Wires: 12AWG-265mm Output Wires: No Input Connectors: XT60 Output Connectors: No Size: 49.5x37.9x32.8mm (Height with fan) Weight: 126.5g (Including the weight of input line) Fan Size: 25x25x10mm Fan Voltage Range: 6-8.4V Fan Powered by: BEC Firmware Upgrade: Supported ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Not Supported LCD G2 Program Box: Not Supported LCD PRO: Not Supported OTA Programmer: Not Supported Program Port: Built-in bluetooth Data Recording: Extreme value: Supported Real-time Data: Supported Historical data (Graph): Supported Applications: Motors: Only supports XERUN AXE R2/R3 motors Vehicles: 1/10, 1/8, 1/7 & 1/6 Rock Crawlers KV Rating/T Count: AXE R2 540/540L/550 & AXE R3 4274   Hobbywing XeRun AXE550 R2 Sensored Crawler Motor 3300KV Applicable to All Weather & Track Conditions Waterproof has been taken to a new level with the Axe System. Completely sealed ESC design with robust heatsink case design ensure the ESC is ready for anything you throw at it. The motor as well, is sealed, and combines a completely new sensor harness. No messy extra steps to make your system water proof. (Note: please dismantle and clean the motor and put some lubricant onto the bearings after using it in some harsh conditions.) Built-in High-precision Magnetic Encoder A high precision magnetic encoder is used in the motor to ensure precision and consistent information is provided to the ESC. This allows the ESC to have more information from the motor than standard “hall” type sensors and provides improved performance and efficiency. Low Cogging Torque The AXE R2 Motors have the extremely low cogging effect and torque pulsation. New Waterproof Sensor Port The brand new design of new waterproof sensor port has smaller size. Its wiring is simpler and more beautiful than AXR R1 system. Specs: Applications: 1/10 Crawlers Type: Brushless/Sensored Compatibility: Use only with the AXE R2/R3 ESC Pole Count: 4 KV Rating: 3300 LiPo cells: 2-3S No Load: 4.7A Diameter: 36mm Length: 63.8mm Shaft Diameter: 5mm Weight: 268g

3.195,-

3.395,-

KJØP
-6%
Hovedbilde Hobbywing QuicRun Fusion PRO Elite FOC 2300KV Hovedbilde Hobbywing QuicRun Fusion PRO Elite FOC 2300KV
Hobbywing QuicRun Fusion PRO Elite FOC 2300KV
Art.nr: 30120500
Copied
Hobbywing QuiqRun Fusion Pro Elite system for crawlere er et gjenomtenkt og plasseringsvennlig system hvor regulatoren er integrert i motoren. FOC-systemet kan drives på 2-4S lipo og er kun 48,5mm lang, slik at systemet passer direkte inn i de aller fleste 1/10-modeller. Fusion systemet kjennetegnes ved ekstremt stille gange og mye kraft/nøyaktighet ved lave turtall, perfekt for crawlere. Fusion Pro Elite er IP67-sertifisert og kommer med XT60-batterikontakt og innebygget BEC.   Flere justerbare parametere Running Mode Lipo Cells Cutoff Voltage Thermal Protection Motor Rotation BEC Voltage Drag Brake Force Drag Brake Rate Max. Reverse Force Max. Brake Force RPM Decrease Rate Punch Neutral Range AUX CH Function   Spesifikasjoner Passer for 1/10 Crawlere KV 2300 Strømtrekk 50A kont. / Peak 150A Batteri 2-4S lipo eller 6-12 cell NiMh BEC 6/7.4V/8.4V, 5A switch mode Størrelse 37x48.5mm Aksling Diameter: 3.17mm / Lengde: 16mm Ledninger 14AWG / 220mm (+ og -) Kontakt XT60 Vekt 178.5g

1.795,-

1.895,-

KJØP
-5%
Hovedbilde Hobbywing 30120404 QuicRun Fusion 8IGHT 2300kV w/ ... Hovedbilde Hobbywing 30120404 QuicRun Fusion 8IGHT 2300kV w/ ...
Hobbywing 30120404 QuicRun Fusion 8IGHT 2300kV w/ ...
Art.nr: HW30120404
Copied
Hobbywing HW30120404 - QuicRun Fusion 8IGHT 2300kV Intergrated ESC 80A Produktinformasjon: QuicRun Fusion 2in1 FOC System 2300KV har integrert drivsystem med Field-Oriented Control (FOC), spesifikt designet for 1/8 skala-modeller. Det kompakte rammeoppsettet måler 42x 69 mm og gir en kraftfull, men plassbesparende løsning for byggere. Det integrerte designet gjør systemet svært enkelt å installere, og gir et ryddig og stilrent oppsett. Beregnet for bruk med 2-4S LiPo / 6-12 celler NiMh batterier og kommer med XT60 kontakt. Hele kraftsystemet har IP67-klassifisering, som gir utmerket beskyttelse mot vann og støv. Denne robuste beskyttelsen gjør at det kan takle utfordrende terreng som sand, is, snø og vann, og sikrer pålitelig drift under ulike klimaforhold. Fusion 8IGHT er et børsteløst FOC-system. Hobbywings unike Field-Oriented-Control (FOC) gir svært jevn kontroll, med en respons og følelse som er uten sidestykke. Ikke bare er Hobbywings FOC-teknologi ekstremt jevn og kraftfull, den gir også tilnærmet lydløs drift og en fantastisk kjøreopplevelse Spesifikasjoner fra produsent Passer for 1/8 skala Crawlere Børsteløs Ja Sensor/Sensorløs Sensor IP-grad IP-67 Strømtrekk Maks 240A kont. BEC 6V/7.4V/8.4V justerbar, kont 6A (Switch mode) Batteri 2-4S lipo eller 6-12 cell NiMh KV 2300 Størrelse 42x 69mm Aksling Diameter: 5mm / Lengde: 18.5mm Ledninger 13AWG 250mm Kontakt XT60 Vekt 338g inkl. ledning og kontakt Støtter ulike LED / LCD programmeringsbokser. ESC-en er kompatibel med både grunnleggende LED-programmeringsbokser og avanserte LCD-programmeringsbokser. In english: Enhanced Low-Speed Torque: The FOC driving mode optimizes torque for rock crawling, providing smoother, more controlled performance on challenging terrain. High Efficiency & Reduced Heat: High-efficiency operation reduces heat buildup, leading to longer runtimes and quieter motor performancecompared to traditional systems. IP67 Waterproof Protection: With an IP67 protection rating, this system ensures reliable, all-weather performance, even in wet and muddy conditions. Intelligent Torque and Speed Control: Active torque output adjustment and speed closed-loop control enable precise handling for better vehicle responsiveness on inclines and uneven surfaces- Superior Holding Power: The active drag brake force adjustment provides enhanced holding power on inclines, offering consistent and controlled braking. Built-In Switch Mode BEC: The system features a strong built-in BEC, delivering 6A continuous and 13A peak current, with adjustable voltages (6V, 7.4V, 8.4V) to power high-torque servos and accessories. Real-Time Drag Brake Adjustment: Real-time adjustment of the drag brake force is possible via your transmitter’s AUX channel, allowing on-the-fly tuning for varied driving conditions. Multiple Protection Features: Equipped with low battery, overheat, throttle loss, and lock-up protections, ensuring safe operation in demanding environments. Compatible with Program Boxes: Easily adjust ESC parameters using the LED or LCD Program Box Pro/G2, streamlining configuration and setup. Specs: Scale: 1/8 Brushed/Brushless: Brushless Sensored/Sensorless: Sensored Waterproof: Yes Cont./Peak Current: 80A/240A Input Voltage: 2-4S LiPo,6-12 Cells NiMH BEC BEC Output: 6V/7.4V/8.4V adjustable,continuous current 6A (Switch mode) KV: 2300KV Motor Poles: 4 Input Wires: Black-13AWG-250mmx1 Red13AWG-250mmx1 Input Connectors: XT60 ESC Programing via SET Button on ESC: Not Supported LED Program Box: Supported LCD G2 Program Box/LCD PRO: Supported OTA Programmer: Not Supported Program Port: Independent programming port(switch position) Firmware Upgrade: Not Supported Diameter / Length of motor: 42mm/69mm Shaft diameter / exposed shaft length: 5mm/18.5mm Weight: 338 grams（including wires&connectors） Vehicles: 1/8 Rock Crawlers

2.179,-

2.279,-

KJØP
-4%
Hovedbilde Hobbywing 38010204 EzRun Combo MAX10 - 3652SL 4000kV ...
Hobbywing 38010204 EzRun Combo MAX10 - 3652SL 4000kV ...
Art.nr: HW38010204
Copied
EzRun MAX10 ESC & 3652SL-G2-4000KV Combo Set This is a brushless Hobbywing EzRun combo set made for 2WD 1/10 scale buggies, trucks & Short Course Trucks and high performance fun! EzRun 3652SL-G2-4000Kv Motor Specifications: Type: 1/10, Bruhsless, Sensorless Motor Poles: 4 KV Rating: 4000 LiPo Cells: 2-3S Shaft Diameter: 3.175mm (1/8”) Outer Diameter: 36mm Length: 52mm Weight: 216g Ballbearings: ID5 x OD13 x T4 mm EzRun MAX10 ESC Specifications: Type: 1/10, Brushless, Sensorless Waterproof: Yes Cont./Peak Current: 60A/450A Input: 2-3S LiPo (in this combo set) BEC Output (Switch Mode): 6V/7.4V,4A Input Wires: 12AWG-200mm Output Wires: 12AWG-200mm Input Connectors: No Output Connectors: 4mm Bullet Connectors (Female) Cooling Fan: yes Size: 49 x 39.5 x 34.7mm Weight: 105g ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD Program Box: Supported WiFi Module: Supported Program Port: FAN/Program Port Firmware Upgrade: Supported Applications: Vehicles: 1/10 Touring, Buggy and Light 2WD Short Course Trucks/Trucks/Monster Trucks

1.349,-

Ikke på lager
Hovedbilde Hobbywing 38010602 EzRun Combo MAX5 HV G2 - 56118SD ...
Hobbywing 38010602 EzRun Combo MAX5 HV G2 - 56118SD ...
Art.nr: HW38010602
Copied
EZRUN MAX5 HV G2 Sensored Brushless ESC & 56118SD G2 800KV Motor Combo - 8-12S LiPo 12S HV ESC, enhanced performance The Max5 HV G2 ESC is designed to work in full-sensored mode at all times when it is paired with HOBBYWING EZRUN 56118 G2. The ESC supports up to 12s LiPo with a maximum output current of up to 250A. The strong explosive, stable output power, together with an excellent low-speed linearity, ensures the ESC meets various application requirements such as; violent start-up, straight-line high-speed, flying slopes, low-speed walking, etc. Intelligent freewheeling technology - Strong drive & Low temperatures The innovative intelligent freewheeling technology effectively reduces heat generation and enables the ESC to have higher driving efficiency. With the addition of super-high power design, operating temperature is drastically lowered (approximately 30 degrees) to improve overall stability and reliability of the ESC. Note: Under heavy load conditions, the temperature of MAX5 HV G2 is only slightly higher than that of MAX4 HV. High protection level, all-weather operation The IP-67 waterproof rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Capacitor upgrade - More secure protection Compared with the previous generation (MAX5 ESC), the total capacity of the capacitor has increased by 45% (1260uF). The super large capacity ensures that 5th scale models do not need external capacitors. In addition, the built-in capacitor thermal protection function of the ESC is always in safe operating state. Powerful BEC The ESC has a built-in super BEC with a maximum output current of up to 25A. The output voltages are switchable between 6V/7.4V/8.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Built-in anti-spark design - Multi-directional protection The ESC has a built-in anti-spark circuit to protect the battery plug from damaging upon using a higher voltage battery(6-12S), and avoids any injuries. Perfect combination with EZRUN 56118 SD G2 motor Achieve the perfect compatibility when used together with EzRun 56118 SD G2 motors. Avoid damaging the motor from overheating with the software protection function. Note: Non-Hobbywing EzRun 56118 SD G2 motors cannot realize motor overheat protection Record and store data in real time to keep track of the running status Connect the ESC to the OTA Bluetooth module, and through the mobile phone APP, you are able to view real-time data and operating status such as; throttle, voltage, current, temperature, speed, etc. Note: Due to the Bluetooth transmission distance, the effective distance is only about 5m! New sensor wire interface - Upgraded waterproof protection The new sensor wire interface enhances the ESC protection level and solves waterproof problems faced by traditional interfaces. Please Note: This ESC supports sensored motors with common interfaces. Sensor wire needs to be purchased separately! ESC Specs: Type: 1/5, Brushless, Sensored, WP ESC Cont./Peak Current: 250A/1600A Input Voltage: 6-12S LiPo BEC Output: 6V/7.4V/8.4V adjustable, continuous current 8A (Switch-mode) Input Wires: 8AWG-200mm Input Connectors: No Input Connectors: 8.0mm Bullet Connectors (Female) Firmware Upgrade: Supported Size: 94.5x59.4x50.9mm Weight: 428.5g (Included input wires) Motors: 56118 size motors Vehicles: 1/5 Truck & Buggy. Examples: Losi DBXL-E, Losi 5T Electrified, ARRMA Kraton 8S & ARRMA Outcast ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD Program Box: Supported OTA Programmer: Supported Program Port: Independent programming port Sensored mode - Enhanced performance The motor is strong, explosive, and has a stable output power with an excellent linearity at low speed to allow the vehicle to easily realize various maneuvers. The control is easy when there power is limitless be it violent start-up, straight-line high-speed, flying slopes, etc. The perfect match for EzRun MAX5 HV G2 ESC The motor achieves perfect compatibility when used together with the EzRun MAX5 HV G2 ESC. The ESC/Motor combination is sensored and provides a smooth and precise control experience to the users. It is equipped with overheat thermal protection function to avoid overheating the motor. High protection level - All-weather operation IP67 Rating provides excellent waterproof and dustproof performance, and can easily cope with various weather conditions and harsh environments. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak it for a long time to avoid damaging the product. New sensor wire interface - Upgraded waterproof protection The new sensor wire interface enhances the motor protection level and solves waterproof problems faced by traditional interfaces. Detachable modular design for easy maintenance The motor adopts a modular detachable structure design, which is convenient for daily cleaning and maintenance, effectively prolonging the service life of the motor and maintaining the working efficiency of the motor. Motor Specs: Type: 1/5, Brushless, Sensored Motor Poles: 4 KV Rating: 800KV LiPo Cells: 8-12S LiPo No-load Current: 6.9A O.D.: 56mm Length: 119.2mm Shaft Diameter: 8mm Connectors: 8mm Male Weight: 1272g Front Bearing: OD22 x ID8 x T7mm Rear Bearing: OD19 x ID8 x T6mm ESC: EZRUN MAX5 HV G2 Vehicles: 1/5 Buggy & Truck. Examples: Losi DBXL-E & Losi 5T Electrified

5.395,-

5.795,-

KJØP
-7%
Hovedbilde Hobbywing 38020313 XeRun AXE540L R2 - 2800KV Crawler ... Hovedbilde Hobbywing 38020313 XeRun AXE540L R2 - 2800KV Crawler ...
Hobbywing 38020313 XeRun AXE540L R2 - 2800KV Crawler ...
Art.nr: HW38020313
Copied
Hobbywing XeRun AXE540L R2 - 2800KV Crawler Combo Børsteløs combo for 1/10 crawler sammensatt av XeRun AXE R2 ESC og AXE R2 540L 2800KV motor. Settet er vanntett (IP67) og kan brukes med 2-3S LiPo eller 6-9 cell NiMH. Motor må loddes til regulator. Innebygget bluetooth modul for programmering og logging. ESC Kont./Peak Strømtrekk    80A/480A Spenning 2-3S Lipo/6-9 Cell NiMH BEC 6V/7.4V @ 6A Kontakt XT60 Motor KV 2800 Poler 4 Diameter 36 mm Lengde 57.8 mm Vekt 234 g Akseldiameter    3.175 mm     Product details in english FOC (Field-oriented Control) for Super Linearity & High Torque & Extreme Slience New sensor technology has changed the feel, performance, and overall tune-ability of the new Axe ESC and Motor in ways somehave never experienced. Field-oriented Control is the name of this new tech, and is something all new to the scale trail, rock racing,and rc world in-general. This new style of sensor allows extremely accurate control and sensing of the motor while maintainingextreme performance and reliability. The motor and ESC are able to match the RPM of the motor to your throttle position under alldriving conditions. This greatly improves down hill driving giving this system the ability to drive down hill under complete control.FOC technology also makes the whole system extremly silent, the motor doesnt create the annoying PWM noise when it is running. Intelligent Torque Output & Speed Closed-loop Control for Easy Control Not just a new ESC and motor, the new FOC sensors, combined with Intelligent Torque output and closed loop speed control mean the ESC and motor will maintain the motor?s Torque level and RPM as the vehicles conditions change. Uphill, down hill, under load, you name it, your Axe system will do what you?re telling it to do. Patented ?Staggered Pole? Rotor Design for Ultra-low Torque Ripple The new Axe motor not only has a new sensor design, but compared to other rock crawler design motors uses an improved staggered pole rotor design. What does this mean? Smoother operation with no cogging, and very clean and consistent deceleration. Smoother brakes, smoother power, and transitions between each are improved. This is specific to trail and rock crawling and allows extremely precise throttle control under any load conditions. Battery Reverse Polarity Protection RCHobbywings AXE FOC Crawler system has been designed with a very unique feature protecting your ESC from damage caused by Battery Reverse Polarity, so no matter how many times you reverse the battery connections the AXE ESC and the paired motor are safe from damage. Maybe this feature is the first in R/C Car industry. Applicable to All Weather & Track Conditions The IP-67 waterproof has been taken to a new level with the AXE System. Completely sealed ESC design with robust heatsink case design ensure the ESC is ready for anything you throw at it. The motor as well, is sealed, and combines a completely new sensor harness. No messy extra steps to make your system water proof. High Driving Efficiency for Long Battery Life Extremely efficient design comes from the combination of new methods. The FOC sensors provided significant improvements to overall motor performance when compared to standard brushless setups. Runtime is increased dramatically while maintaining exceptional levels of power and response. Professional Drag Brake Adjustments & Super Parking Capacity Drag brake rate, and drag brake tuning allows scalers to adjust not only the hill/hold/drag brake, but how quickly the brake applies. This allows high speed driving without sudden jerks or stops when releasing the throttle. The drag brake itself is super charged, and able to be run at extremely high levels. Compared to a standard crawling brushless setup, the drag brake in the AxeSystem can be rated at 200% in comparison. Innovative Sensor Port An all new sensor harness is more than just water proof, and will take on all element from water to mud and dirt/dust. No need for anything extra, o-ring sealed, and uses a screw together design to ensure it won?t come loose. Built-in Bluetooth for Connecting the Mobile APP Directly Built in connectivity means exactly that. The ESC has Blue Tooth built right in! Nothing extra is needed to access the ESC?s complete on board programming but your smart phone device and the Free Hobbywing App from your App Store. That?s right folks, the Bluetooth feature is BUILT INTO the ESC. No extra devices, wires or connections required! APPs will be available both IOS and Android. Built-in High-precision Magnetic Encoder A high precision magnetic encoder is used in the motor to ensure precision and consistent information is provided to the ESC. This allows the ESC to have more information from the motor than standard ?hall? type sensors and provides improvedperformance and efficiency. Advanced and Secure Electronic Switch The dust, dirt, and waterproof switch housing ensures a long reliable life for your ESC, will not suffer from the problems most standard on/off switches encounter. Multiple Programmable Items With enough settings to keep your vehicle running ?just right?, there are also timing/boost settings, just in case it?s not fast enough, this feature allows you to unleash some extra top speed from your Axe System. Sometimes the trails are long and winding, so more wheel speed is welcome!

2.995,-

3.195,-

KJØP
-6%
Hovedbilde Hobbywing 38020320 XR10 & JS4 2700KV G2 Combo Hovedbilde Hobbywing 38020320 XR10 & JS4 2700KV G2 Combo
Hobbywing 38020320 XR10 & JS4 2700KV G2 Combo
Art.nr: HW38020320
Copied
Produktinformasjon Sensorbasert børsteløs motor og regulator combo. Passer til 2-3s LiPo oppsett. Leveres uten batterikontakt. OBS! XR10 er kompatibel med 2-3s LiPo og 4,8 - 10,8V NiMh, skal du bruke 3s LiPo eller 8,4 - 10,8V NiMh MÅ du bytte kjølevifte til en 12V vifte. ESC 60A Størrelse 33,5 x 28,5 x 30,5mm Vekt 59,8g Motor Turn 13.5T KV 2700 Størrelse 35,8 x 52,5mm Vekt 200g   Product details in english The Hobbywing XERUN Justock Zero Spec Sensored Brushless ESC/Motor Combo was developed for Zero-timing spec racing. The ESC timing has been permanently set to 0°, to ensure 100% fair and competitive racing when racing in spec motor classes. Hobbywings XERUN Justock 3650 Sensored Brushless Motors are a great low cost option for stock class club racing. Featuring a heat resistant magnet attached steel case, double insulated windings, precision bearings, fixed endbell and a heavy duty balanced rotor, the Justock 3650 delivers outstanding performance and durability that makes them an excellent club handout motor for spec series racing, as well as a practice motor. ESC High Reliability & Durability Reliable hardware with advanced software allows the XR10 Justock to provide high power output and overload protection. Efficient Heat Dissipation The modified heat sink provides increased surface area. This, combined with Hobbywings patented copper heat conductive plates, allows heat to be quickly transferred to the heatsink for dissipation. The added high performance fan creates a reliable heat management system for maximum cooling. Small Footprint The small, compact size allows the XR10 Justock to fit most 1/10 touring car, 1/12 pan and F1 applications. Many Applications The ESC was designed for 1/10 touring car, 1/12 pan and F1 applications, but is an excellent choice for any spec racing class. Plus, when paired with a 32T or similar motor, it is an ideal low cost choice for rock crawler applications. Single Button Programming & Factory Reset The Set button on the ESC allows the user to easily program or reset the ESC to default mode. Regular Firmware Updates Upgrade the XR10 Justock with the Hobbywing USB Link software, multifunction LCD program box and a PC. Hobbywing updates the ESC firmware regularly, giving you access to upgraded features on a consistent basis. Motor Linear & Smooth Control The built in hall sensor and non adjustable end bell, combined with a precision, balanced rotor provides smooth and linear power. Dustproof & Heat Conductive Silicone O-ring Seal The o-ring installed between the end bell and stator helps to conduct inner heat to the motor case, and also prevents dust from entering the hall sensor. Plug & Play Built in 3.5mm low impedance bullet connectors provide a stable, low resistance connection and allow easy motor removal without a soldering iron. Re-Buildable Design The end bell can be easily removed for routine maintenance and for replacement of common wear parts, such as the rotor, bearings and sensor module. Compatibility This motor is compatible with all ESCs, but is a perfect match for the XR10 Justock ESC and all other Hobbywing ESC`s. It is a great choice for Stock or Sport classes, but is a great choice for beginners or racers looking for a practice motor. IFMAR/ROAR Compliant Motor is designed within IFMAR/ROAR specifications. Specifications ESC Model XERUN XR10 Justock Cont./Peak Current 60A/380A Motor Sensored / Sensorless Brushless Motor Applications 1/10, 1/12 on-road & off-road CLUB competition and normal training   LiPo/NiMH Cells 2-3S LiPo/4-9S NiMH BEC Output 6V, 2A (Line-mode BEC) Fan (Included) Powered by the stable BEC output voltage of 6V Connectors Input End: No, Output End: No Size 33.5x28.5x30.5mm Weight 59.8g ESC Programming Via the Rx Cable (or Throttle Control Cable) Motor Limit 2S LiPo/4-6S NiMH >=8.5T (1/10 on-road), >=11.5T (1/10 off-road) Motor Limit 3S LiPo/8-9S NiMH >=13.5T (1/10 on-road), >=17.5T (1/10 off-road) Motor Turn 13.5T KV (No-load) 2700KV LiPo 2~3S Resistance 0.0275ohm No-load Current 1.7A Max. Output Power 210W Current at the point of M.O.P 58A Dimension 35.8x52.5mm Shaft Diameter 3.17mm Shaft Length 15mm Pole 2 Weight 200g Applications 1/10, 1/12 On-Road & Off-Road (choose the motor based on competition rules and chosen class).

1.595,-

1.695,-

KJØP
-6%
Hovedbilde Hobbywing 38020344 EzRun Combo MAX10 G2 140A - 3665SD ... Hovedbilde Hobbywing 38020344 EzRun Combo MAX10 G2 140A - 3665SD ...
Hobbywing 38020344 EzRun Combo MAX10 G2 140A - 3665SD ...
Art.nr: HW38020344
Copied
Hobbywing Ez-Run Max10 G2 140A ESC & 3665SD G3 3200KV Motor Combo - 2-3S LiPo ESC Sensor Upgrade, Great Throttle Response Smart technology increases heat dissipation effectiveness Larger capacitor built-in, double explosion-proof Smart freewheeling technology, higher efficiency Data logging, convenient IP67 protection, all-weather use Upgraded sensor-mode with great throttle response The EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors. Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more. Turbo timing adjustments: 32 Degrees Speed is significantly increased up to 25% Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity. Large built-in capacitor = Double explosion proof Compared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode. Smart freewheeling technology, higher efficiency The new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation. Data logging, convenient After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. ESC IP67 protection, all-weather use The IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately. ESC Specs: Scale: 1/10 Type: Brushless/Sensored Waterproof: Yes (IP67) Cont./Peak Load: 140/880A Input Voltage: 2-4S LiPo BEC: 6/7.4V @ 5A Input Wires: 12AWG Output Wires: 12AWG Input Connector: XT60 Output Connector: 4mm Gold (female bullet) Fan Size: 30x30x10mm Size: 53x39.5x37.2mm Weight: 120g Firmware Upgrade: Supported ESC Programming via: SET Button on ESC: No LED Program Box: Supported LCD Program Box (G2): Supported Programming Port: Separate ESC Applications: 1/10 Vehicles: Short Course Tryucks, Stadium Trucks, & Monster Trucks KV Rating 3S LiPo: ≤4000kV 3665 size motor KV Rating 4S LiPo: ≤2600kV 4268 size motor   EZRUN 3665SD-3200KV G3 Sensored Motor The new generation adds performance. The evolution of a sensored motor, increases performance. The EzRun 3652/3665 SD G3 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches the EzRun MAX10 G2 ESC. Motor Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX10 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. Compared with the previous generation motor, the output power and efficiency are increased by more than 3%. Under the same load, the motor temperature is effectively reduced. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. Powerful hardware configuration, efficiency is greatly improved The high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and a great throttle control. The EzRun 3652/3665 G3 motor adopts a high precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable. Compared to the G2 motor: The overall efficiency is increased by 3% More effective while the maximum output power has increased by 5% The motor temperature is greatly reduced under the same load conditions The stable power and high output of the motor, makes throttle control for maneuvers (power wheelies, straight line power, and clearing jumps) much easier. Design, quality materials, durable All the materials used on the EZRUN 3652/3665 G3 motor (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shaft) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time. The motor adopts a modular detachable structure design for easy disassembly and daily maintenance. This helps to prolong the lifespan of the motor and maintaining the efficiency of the motor simple. Applicable to All Weather & Track Conditions The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note, the bearings are not IP rated. Motor Specs: Scale: 1/10 Type: Sensored/Brushless Pole Count: 4 KV Rating: 3200 LiPo Cells: 2-3S No-load Current: ≤7.1A Diameter: 37mm Length: 65.8mm Shaft Diameter: 5mm Weight: 304g Front Bearing: D16xD5xT5mm (not IP rated) Rear Bearing: D11xD5xT5mm (not IP rated) Applications: 1/10; Short Course Truck, Stadium Truck, Monster Truck

2.395,-

2.495,-

KJØP
-4%
Hovedbilde Hobbywing 38020345 EzRun Combo MAX10 G2 140A - 3665SD ... Hovedbilde Hobbywing 38020345 EzRun Combo MAX10 G2 140A - 3665SD ...
Hobbywing 38020345 EzRun Combo MAX10 G2 140A - 3665SD ...
Art.nr: HW38020345
Copied
Hobbywing Ez-Run Max10 G2 140A ESC & 3665SD G3 4000KV Motor Combo - 2-3S LiPo ESC Sensor Upgrade, Great Throttle Response Smart technology increases heat dissipation effectiveness Larger capacitor built-in, double explosion-proof Smart freewheeling technology, higher efficiency Data logging, convenient IP67 protection, all-weather use Upgraded sensor-mode with great throttle response The EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors. Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more. Turbo timing adjustments: 32 Degrees Speed is significantly increased up to 25% Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity. Large built-in capacitor = Double explosion proof Compared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode. Smart freewheeling technology, higher efficiency The new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation. Data logging, convenient After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. ESC IP67 protection, all-weather use The IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately. ESC Specs: Scale: 1/10 Type: Brushless/Sensored Waterproof: Yes (IP67) Cont./Peak Load: 140/880A Input Voltage: 2-4S LiPo BEC: 6/7.4V @ 5A Input Wires: 12AWG Output Wires: 12AWG Input Connector: XT60 Output Connector: 4mm Gold (female bullet) Fan Size: 30x30x10mm Size: 53x39.5x37.2mm Weight: 120g Firmware Upgrade: Supported ESC Programming via: SET Button on ESC: No LED Program Box: Supported LCD Program Box (G2): Supported Programming Port: Separate ESC Applications: 1/10 Vehicles: Short Course Tryucks, Stadium Trucks, & Monster Trucks KV Rating 3S LiPo: ≤4000kV 3665 size motor KV Rating 4S LiPo: ≤2600kV 4268 size motor   EZRUN 3665SD-4000KV G3 Sensored Motor The new generation adds performance. The evolution of a sensored motor, increases performance. The EzRun 3652/3665 SD G3 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches the EzRun MAX10 G2 ESC. Motor Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX10 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. Compared with the previous generation motor, the output power and efficiency are increased by more than 3%. Under the same load, the motor temperature is effectively reduced. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. Powerful hardware configuration, efficiency is greatly improved The high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and a great throttle control. The EzRun 3652/3665 G3 motor adopts a high precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable. Compared to the G2 motor: The overall efficiency is increased by 3% More effective while the maximum output power has increased by 5% The motor temperature is greatly reduced under the same load conditions The stable power and high output of the motor, makes throttle control for maneuvers (power wheelies, straight line power, and clearing jumps) much easier. Design, quality materials, durable All the materials used on the EZRUN 3652/3665 G3 motor (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shaft) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time. The motor adopts a modular detachable structure design for easy disassembly and daily maintenance. This helps to prolong the lifespan of the motor and maintaining the efficiency of the motor simple. Applicable to All Weather & Track Conditions The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note, the bearings are not IP rated. Motor Specs: Scale: 1/10 Type: Sensored/Brushless Pole Count: 4 KV Rating: 4000 LiPo Cells: 2-3S No-load Current: ≤8.2A Diameter: 37mm Length: 65.8mm Shaft Diameter: 5mm Weight: 297g Front Bearing: D16xD5xT5mm (not IP rated) Rear Bearing: D11xD5xT5mm (not IP rated) Applications: 1/10; Short Course Truck, Stadium Truck, Monster Truck

2.295,-

2.495,-

KJØP
-8%
Hovedbilde Hobbywing 38020346 EzRun Combo MAX10 G2 80A - 3652SD ... Hovedbilde Hobbywing 38020346 EzRun Combo MAX10 G2 80A - 3652SD ...
Hobbywing 38020346 EzRun Combo MAX10 G2 80A - 3652SD ...
Art.nr: HW38020346
Copied
Hobbywing Ez-Run Max10 G2 80A ESC & 3652SD G3 3300KV Motor Combo - 2-3S LiPo ESC Sensor Upgrade, Great Throttle Response Smart technology increases heat dissipation effectiveness Larger capacitor built-in, double explosion-proof Smart freewheeling technology, higher efficiency Data logging, convenient IP67 protection, all-weather use Upgraded sensor-mode with great throttle response The EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors. Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more. Turbo timing adjustments: 32 Degrees Speed is significantly increased up to 25% Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity. Large built-in capacitor = Double explosion proof Compared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode. Smart freewheeling technology, higher efficiency The new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation. Data logging, convenient After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. ESC IP67 protection, all-weather use The IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately. ESC Specs: Scale: 1/10 Type: Brushless/Sensored Waterproof: Yes (IP67) Cont./Peak Load: 180/520A Input Voltage: 2-3S LiPo BEC: 6/7.4V @ 5A Input Wires: 12AWG Output Wires: 12AWG Input Connector: XT60 Output Connector: 4mm Gold (female bullet) Fan Size: 25x25x10mm Size: 53x39.5x37.2mm Weight: 120g Firmware Upgrade: Supported ESC Programming via: SET Button on ESC: No LED Program Box: Supported LCD Program Box (G2): Supported Programming Port: Separate ESC Applications: 1/10 Vehicles: Short Course Tryucks, Stadium Trucks, & Monster Trucks (Light Loads) KV Rating 2S LiPo: ≤6000kV KV Rating 3S LiPo: ≤4200kV 3652 size motor   EZRUN 3652SD-3300KV G3 Sensored Motor The new generation adds performance. The evolution of a sensored motor, increases performance. The EzRun 3652/3665 SD G3 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches the EzRun MAX10 G2 ESC. Motor Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX10 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. Compared with the previous generation motor, the output power and efficiency are increased by more than 3%. Under the same load, the motor temperature is effectively reduced. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. Powerful hardware configuration, efficiency is greatly improved The high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and a great throttle control. The EzRun 3652/3665 G3 motor adopts a high precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable. Compared to the G2 motor: The overall efficiency is increased by 3% More effective while the maximum output power has increased by 5% The motor temperature is greatly reduced under the same load conditions The stable power and high output of the motor, makes throttle control for maneuvers (power wheelies, straight line power, and clearing jumps) much easier. Design, quality materials, durable All the materials used on the EZRUN 3652/3665 G3 motor (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shaft) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time. The motor adopts a modular detachable structure design for easy disassembly and daily maintenance. This helps to prolong the lifespan of the motor and maintaining the efficiency of the motor simple. Applicable to All Weather & Track Conditions The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note, the bearings are not IP rated. Motor Specs: Scale: 1/10 Type: Sensored/Brushless Pole Count: 4 KV Rating: 3300 LiPo Cells: 2-3S No-load Current: ≤3.9A Diameter: 37mm Length: 53mm Shaft Diameter: 3.17mm (1/8") Weight: 228g Front Bearing: D13xD5xT4mm (not IP rated) Rear Bearing: D11xD5xT5mm (not IP rated) Applications: 1/10; On-road/Off-road, Short Course 2WD Truck (Light Loads)

1.659,-

1.859,-

KJØP
-11%
Hovedbilde Hobbywing 38020348 EzRun Combo MAX10 G2 80A - 3652SD ... Hovedbilde Hobbywing 38020348 EzRun Combo MAX10 G2 80A - 3652SD ...
Hobbywing 38020348 EzRun Combo MAX10 G2 80A - 3652SD ...
Art.nr: HW38020348
Copied
Hobbywing Ez-Run Max10 G2 80A ESC & 3652SD G3 5400KV Motor Combo - 2S LiPo ESC Sensor Upgrade, Great Throttle Response Smart technology increases heat dissipation effectiveness Larger capacitor built-in, double explosion-proof Smart freewheeling technology, higher efficiency Data logging, convenient IP67 protection, all-weather use Upgraded sensor-mode with great throttle response The EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors. Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more. Turbo timing adjustments: 32 Degrees Speed is significantly increased up to 25% Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity. Large built-in capacitor = Double explosion proof Compared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode. Smart freewheeling technology, higher efficiency The new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation. Data logging, convenient After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. ESC IP67 protection, all-weather use The IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately. ESC Specs: Scale: 1/10 Type: Brushless/Sensored Waterproof: Yes (IP67) Cont./Peak Load: 180/520A Input Voltage: 2-3S LiPo BEC: 6/7.4V @ 5A Input Wires: 12AWG Output Wires: 12AWG Input Connector: XT60 Output Connector: 4mm Gold (female bullet) Fan Size: 25x25x10mm Size: 53x39.5x37.2mm Weight: 120g Firmware Upgrade: Supported ESC Programming via: SET Button on ESC: No LED Program Box: Supported LCD Program Box (G2): Supported Programming Port: Separate ESC Applications: 1/10 Vehicles: Short Course Tryucks, Stadium Trucks, & Monster Trucks (Light Loads) KV Rating 2S LiPo: ≤6000kV KV Rating 3S LiPo: ≤4200kV 3652 size motor   EZRUN 3652SD-3300KV G3 Sensored Motor The new generation adds performance. The evolution of a sensored motor, increases performance. The EzRun 3652/3665 SD G3 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches the EzRun MAX10 G2 ESC. Motor Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX10 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. Compared with the previous generation motor, the output power and efficiency are increased by more than 3%. Under the same load, the motor temperature is effectively reduced. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. Powerful hardware configuration, efficiency is greatly improved The high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and a great throttle control. The EzRun 3652/3665 G3 motor adopts a high precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable. Compared to the G2 motor: The overall efficiency is increased by 3% More effective while the maximum output power has increased by 5% The motor temperature is greatly reduced under the same load conditions The stable power and high output of the motor, makes throttle control for maneuvers (power wheelies, straight line power, and clearing jumps) much easier. Design, quality materials, durable All the materials used on the EZRUN 3652/3665 G3 motor (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shaft) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time. The motor adopts a modular detachable structure design for easy disassembly and daily maintenance. This helps to prolong the lifespan of the motor and maintaining the efficiency of the motor simple. Applicable to All Weather & Track Conditions The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note, the bearings are not IP rated. Motor Specs: Scale: 1/10 Type: Sensored/Brushless Pole Count: 4 KV Rating: 5400 LiPo Cells: 2S No-load Current: ≤6.8A Diameter: 37mm Length: 53mm Shaft Diameter: 3.17mm (1/8") Weight: 228g Front Bearing: D13xD5xT4mm (not IP rated) Rear Bearing: D11xD5xT5mm (not IP rated) Applications: 1/10; On-road/Off-road, Short Course 2WD Truck (Light Loads)

1.695,-

1.895,-

KJØP
-11%
Hovedbilde Hobbywing 38020371 Xerun Combo XR10 Justock G3S 13.5T ... Hovedbilde Hobbywing 38020371 Xerun Combo XR10 Justock G3S 13.5T ...
Hobbywing 38020371 Xerun Combo XR10 Justock G3S 13.5T ...
Art.nr: HW38020371
Copied
Hobbywing HW38020371 - XERUN XR10 Justock G3S ESC & 3650 13.5T G2.1 Motor Combo The XR10 Justock G3S has precise control and powerful performance. It is suitable for 1/10 on-road and off-road zero-timing (blinky) competitions. Fan intelligent start and stop function When the ESC temperature is low, the fan does not activate, when the ESC temperature reaches the preset value, the fan automatically turns on. The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range. Freewheeling Feature With the freewheeling function turned-on, the ESC temperature is lower, the vehicle decelerates faster when the throttle input is off, and it has better controllability around the corners. Multi RPM limit, select as needed Supports 79RPM Limits（10000-88000RPM）RPM limit value selection. It can be programmed through the LCD programming box or OTA module. It is simple and convenient to meet the RPM limit requirements of various competitions in the world. Built-in capacitor module, optimized layout The built-in capacitor module eliminates the need for external capacitors and unwanted space. BEC The ESC has a built-in BEC which can support a maximum output current of up to 4A. The output voltage at either 6 or 7.4V. This will ensure constant power supplied to today’s high-torque servos in the market. Built-in data logging function The ESC has a built-in data recording function. making it easy to obtain the operating status. The logged data includes: Minimum voltage Maximum ESC temperature Maximum current Maximum motor temperature Maximum RPM Wireless connection for data recording and analysis After the ESC is connected to the OTA Bluetooth module, connect to the ESC through the HW Link mobile app and turn on the real-time data recording function. You can view data such as throttle, voltage, current, temperature, speed, etc. in real time. In addition, OTA can record the above data using HW Link. Easy to implement data analysis functions. Note: Due to the Bluetooth transmission distance, the effective distance is about 5m! Specs: Type: Brushless, Sensored 1/10 ESC Cont./Peak Current: 60A/380A Input Voltage: 2S LiPo BEC Output: 6V/7.4V @ 4A Input Wires: 14AWG-200mm Output Wires: 14AWG-200mm Input Connectors: No Output Connectors: No Fan Size: 25x15x10mm Fan Output Wires: 5-7.4V Fan Input Connectors: BEC Firmware Upgrade: Supported Size: 40.9x33.9x32.1mm Weight: 75.4g Applications: Sensorless BL Motors / Sensored BL Motors Vehicles: 1/10 On-road and Off-road club competition and normal training KV Rating/T Count: ≥10.5T 3650 Motor ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Not Supported LCD G2 Program Box: Supported LCD Box Pro: Supported OTA Programmer: Supported Programming Port: Separate Motor Specs: Type: 1/10, Brushless Sensored 2-pole Stock KV Rating: 3200 (13.5T) LiPo Cells: 2-3S (2S only in this combo) No-load Current: 4A O.D.: 35.9mm Length: 52.5mm Shaft Diameter: 3.17mm Weight: 175g Front Bearing: OD9.525xID3.175xT3.967mm Rear Bearing: OD9.525xID3.175xT3.967mm Timing: Fixed Applications: STOCK/SPORT class (choose the motor as per competition rules) of 1/10 On-road (i.e. competition touring car or drift, F1, Mini car, and etc.) and Off-road (i.e. buggy, 2WD SCT & truck) racing, Normal Training, and Rock Crawlers (21.5T & 25.5T only).

1.695,-

1.795,-

KJØP
-6%
Hovedbilde Hobbywing 38020372 XR10 Justock G3S Combo - 17.5T Hovedbilde Hobbywing 38020372 XR10 Justock G3S Combo - 17.5T
Hobbywing 38020372 XR10 Justock G3S Combo - 17.5T
Art.nr: HW38020372
Copied
Hobbywing her med en børsteløs kombo med XeRun XR10 Justock G3S ESC og Xerun Justock Stock G2.1 motor. Dette oppsettet anbefales til 1/10 og 1/12, on-road eller off-road. Dette oppsettet er designet for bruk av 2s LiPo, regulator leveres uten kontakter. Denne serien har et timingsystem satt til 0grader. Kan programmeres med Program Box Pro og OTA Programmer. Motor * Akseldiameter: 3.17mm * Diameter: 35.9mm * Lengde: 52.5mm * Vekt: 176g * KV: 2450 ESC * Innspenning: 2S LiPo * Dimensjoner: 40.9x33.9x32.1mm * Vekt: 75.4g * Type: Børsteløs & Sensor/Sensorløs * BEC: 6V/7.4V (kontinuerlig spenning 4A) * Vifte: 25x25x10mm * Vannavstøtende: Nei

1.750,-

1.895,-

KJØP
-8%
Hovedbilde Hobbywing 38020375 EzRun Combo MAX8 G2S SD - 4268SD ...
Hobbywing 38020375 EzRun Combo MAX8 G2S SD - 4268SD ...
Art.nr: HW38020375
Copied
Hobbywing HW38020375 - EzRun MAX8 G2S ESC + 4268SD 2500kV Sensor Combo The esc has an innovative waterproof sensor interface,enhancing the overall waterproof and dustproof performance. It is easy to deal with the harsh conditions containing sediment, ice and snow, water accumulation. Built-in ultra-powerful switch mode BEC and support for 6V/7.4V/8.4V switching, supporting a wide range of powerful and high-voltage servos. Supports turbo timing setting, the timing response is remarkable when used with the matching motor. Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, current protection. The built-in (integrated in the switch) Bluetooth function allows for setting and upgrading the esc by directly connecting to the mobile app, without any additional devices, making it simpler and more convenient Data logging function to view various running data on the HW LINK app Supports the firmware upgrade of the ESC, you can enjoy the latest functions Extreme output, easy to control The ESC has power, yet smooth and linear throttle response. This balance of power and control allows drivers to drive their vehicles at the limit comfortably. Optimized hardware, increases in stability and reliability Based on the MAX8 G2 ESC, the brand new G2S ESC is equipped with optimized hardware design application such as intelligent freewheeling technology. The stability and reliability of the ESC has been further improved. Optimized hardware design Intelligent freewheeling technology Built-in Bluetooth, directly connected to the mobile APP The ESC has a built-in Bluetooth module. It allows you to connect to the mobile APP directly without plugging any device. It is simple and convenient to perform parameter settings, data reading, firmware upgrades other operations. Note: The data includes throttle amount, voltage, current, temperature, speed, etc. Built-in data logging function, ease of obtaining power operating status The ESC has a built in data recording module. Store up to 10 minutes of your most recent run. Using the HW Link V2 App, you can view the data saved to the ESC. In addition, the module allows you to view Real Time Data from the ESC for bench top testing and viewing of the data outputs. Note: Due to transmission distance of bluetooth, the effective distance is only about 5m! Intelligent fan start and stop function The ESC fan does not run when the ESC temperature is low.The fan automatically turns on when the ESC temperature reaches the preset value. The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range. Efficient cooling system A frameless fan with patented technology is used. The large flow of air from the side of the fan effectively blows the heat away from the integrated housing radiator to ensure that the ESC is always in the optimal operating temperature. High level of protection Excellent waterproof and dust-proof performance (IP67) Cope with harsh environments, various climate conditions all-weather operation capabilities 1/8th power system turbo timing technology Turbo timing that is adjustable up to 32 degrees. Using turbo allows motor RPM to be increased through advanced ESC electronic timing. The maximum speed can be increased by approximately 25% (EzRun 4268/4278SD G2 motors) Capacitor overheating protection The Capacitor protection prevents damage to the power caps from overheating from overloads or extreme conditions. This protects the ESC from damage. Buil-in Super BEC A maximum output current of up to 15A The output voltage can be switched in three levels of 6V, 7.4V & 8.4V The built in super BEC allows racers to use high power, high voltage servos. Waterproof Sensor Harness The proven Hobbywing waterproof sensor harness provides an element proof solution for sensor based systems. Using a Hobbywing Adaptor (optional) normal/standard sensor motors can be used as well. Note: Supports normal adaptor sensored motors, it requires an additional adapter wires for other motors. Specs: Brushless, Sensored, Waterproof 1/8 ESC Cont./Peak Current: 160A/1050A Input Voltage: 3-6S Lipo (3-4S LiPo with the included motor) BEC Output: 6V / 7.4V / 8.4V adjustable, continuous current 6A (Switch-mode) Input Wires: 10AWG-150mm Output Wires: No Input Connectors: XT90 Output Connectors: 6.5mm Bullet Connectors (Female) Fan Size: 30x30x10mm Fan Voltage Range: 6V/7.4V/8.4V Fan Powered by: BEC Size: 60x48x40.5mm Weight: 192g Firmware Upgrade: Supported ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Not Supported LCD G2 Program Box: Not Supported LCD PRO: Not Supported OTA Programmer: Not Supported Program Port: Built-in Bluetooth Data Recording: Extreme value: Supported Real-time Data: Supported Historical data (Graph): Supported Hobbywing EzRun 4268-2500Kv 3-4S - Sensored Sport Brushless Motor The ESC uses a special process, coupled with an innovative waterproof design, to increase waterproofing and dust-proofing performance in different climates. It is easy to deal with the harsh conditions containing sediment, ice and snow, water accumulation. EzRun 4268SD G2 Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX8 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. The rotor adopts four strong magnetic and high temperature resistant sintered Nd-Fe-B magnets, widens the magnetic tile, provides super torque, and makes the motor have strong explosive force and stable output power. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. High output efficiency, effectively reduce the motor temperature and output more power under the same load. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. EzRun 4268SD G2 Specs: Type: 1/8, sensored, brushless Pole Count: 4 KV Rating: 2500KV LiPo Cells: 3-4S No-load Current: 4.8A Diameter: 42mm Length: 68mm Shaft Diameter: 5mm Weight: 355g Front Bearing: D16xD5xT5mm Rear Bearing: D11xD5xT5mm Applications: Vehicles: 1/8 Buggy, Trucks & Monster Trucks (Sport) & Heavy Duty 1/10 Trucks & Monster Trucks (Sport)

2.995,-

3.295,-

KJØP
-9%
Hovedbilde Hobbywing 38020388 XeRun AXE540L R2 - 2800KV Crawler ... Hovedbilde Hobbywing 38020388 XeRun AXE540L R2 - 2800KV Crawler ...
Hobbywing 38020388 XeRun AXE540L R2 - 2800KV Crawler ...
Art.nr: HW38020388
Copied
Hobbywing XeRun AXE540L R2 - 2800KV Crawler Combo FOC Justerbar motorbrems Innebygd Bluetooth-tilkobling (ESC) Børsteløs combo for 1/10 crawler sammensatt av XeRun AXE Plus R3 ESC og AXE540L 2800KV R2 Motor. Settet er vanntett (IP67) og kan brukes med 2-6S LiPo. Innebygget bluetooth modul for programmering og logging. ESC Produkt Brushless Sensored FOC Kont./Peak Strømtrekk 135A / 600A Spenning 2-6S LiPo BEC 6V / 7.4V / 8.4V (justerbar) @6A Kontakt XT60 Motor Produkt Brushless Sensored FOC KV 2800 Poler 4 Diameter 36 mm Lengde 57,8 mm Vekt 213 g Akseldiameter 3.175 mm

3.095,-

3.295,-

KJØP
-6%
Hovedbilde Hobbywing 38020500 XeRun XR8+ G2 & 4268 1900KV G3 ... Hovedbilde Hobbywing 38020500 XeRun XR8+ G2 & 4268 1900KV G3 ...
Hobbywing 38020500 XeRun XR8+ G2 & 4268 1900KV G3 ...
Art.nr: 38020500
Copied
Produktinformasjon 2-6S 1/8 skala Børsteløs combo til 1/8 skala sammensatt av XeRun XR8 Plus G2S ESC & 4268 1900KV G3 motor. ESC Hobbywing XeRun XR8 Plus G2S, ypperlig børsteløs regulator til 1/8 skala, ofte brukt i konkurransesammenheng. Kompatibel med 2-6s LiPo, leveres med løse og myke 11AWG kabler klare til å loddes men uten kontakter. Sensorkabel og krympeplast følger også med.   Størrelse 56,1 x 42,1 x 38,5mm Vekt 122g uten ledninger men inkl bryter Vifte 30x30x10mm Motor Sensorbasert børsteløs motor. Passer til bl.a. 1/8 skala konkurranse bruk.   Akseldiameter 5mm Diameter 42mm Lengde 68mm Vekt 315g KV 1900   Product details in english Hobbywing Xerun XR8 Plus G2S Brushless ESC/4268SD G3 Motor Combo. The Hobbywing Xerun XR8 Plus G2S 1/8 Competition Sensored Brushless ESC is the next level in 1/8 competition ESCs. Advancements have been made allowing this ESC to support 48° of boost and turbo timing. Pair this ESC with the included 4268SD G3 motor for extreme performance.    

4.295,-

4.595,-

KJØP
-7%
Hovedbilde Hobbywing 38030207 QuicRun Combo 10BL120 - 3652SL ...
Hobbywing 38030207 QuicRun Combo 10BL120 - 3652SL ...
Art.nr: HW38030207
Copied
QuicRun Brushless WP 10BL120 G2 ESC & 3652SL G2 3250KV Motor Combo Intelligent freewheeling technology, greatly improved performance The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC. Powerful built-in BEC The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Efficient cooling system The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state. Capacitor Thermal Protection Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading. Built-in capacitors Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use. High protection level, all-weather operation The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not ermanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Explosive Output Power The output of the motor is powerful and explosive. Taking 3652-3250KV as an example and comparing it with the same specification; there is more than 10% increase in maximum output power! Excellent performance, temperature is lowered The motor efficiency is significantly higher when comparing it with the same specification. Taking 3652-3250KV as an example, the efficiency of the rear section is 8% higher & motor temperature is lower under the same load conditions. Explosion-improved rotor design - strong and reliable The rotor is designed with front and rear aluminum end plates, which greatly improves the overall balance. At the same time, the rotor is wound with high-strength tensile materials and has strong explosion-proof ability. Detachable design for easy maintenance The motor adopts a modular detachable structure design, which is convenient for routine cleaning and maintenance, effectively prolonging the service life of the motor and maintaining the working efficiency of the motor. Motor Specs: Type: 1/10, Brushless, Sensorless Poles: 4 KV Rating: 3250 LiPo: 2-3S No Load Current: 4A OD: 36mm Length: 52mm Shaft Diameter: 3.175mm Shaft Length: 15mm Connectors: 4mm male Weight: 223g Front Bearing: OD13xID5xT4mm Rear Bearing: OD13xID5xT4mm Applications: 1/10 On-road, 2WD Buggy & 2WD Truck (light loads) ESC Specs: Type: 1/10, Brushless, WP, Sensorless ESC Cont./Peak Current: 120A/760A Input Voltage: 2S-4S Lipo BEC Output: Switch Mode 6V/7.4V @ 5A Input Wires: 12AWG-150MM Input Connector: XT60 Output Connectors: 4mm Gold (female) Size: 52.8x39.8x38.2mm Weight: 119g (Included wires & connectors) Firmware Upgrade: Not Supported Motors: Sensorless / Sensored Brushless Motor (only in sensorless mode) Vehicles: 1/10 Short course trucks & Monster trucks Applicable motors: 3652 & 3660 Size ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD G2 Program Box: Supported OTA Programmer: Not Supported Program Port: Separate Program Port

1.195,-

1.395,-

KJØP
-14%
Hovedbilde Hobbywing 38030208 QuicRun Combo 10BL120 - 3652SL ...
Hobbywing 38030208 QuicRun Combo 10BL120 - 3652SL ...
Art.nr: HW38030208
Copied
QuicRun Brushless WP 10BL120 G2 ESC & 3652SL G2 4000KV Motor Combo Intelligent freewheeling technology, greatly improved performance The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC. Powerful built-in BEC The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Efficient cooling system The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state. Capacitor Thermal Protection Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading. Built-in capacitors Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use. High protection level, all-weather operation The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not ermanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Explosive Output Power The output of the motor is powerful and explosive. Taking 3652-3250KV as an example and comparing it with the same specification; there is more than 10% increase in maximum output power! Excellent performance, temperature is lowered The motor efficiency is significantly higher when comparing it with the same specification. Taking 3652-3250KV as an example, the efficiency of the rear section is 8% higher & motor temperature is lower under the same load conditions. Explosion-improved rotor design - strong and reliable The rotor is designed with front and rear aluminum end plates, which greatly improves the overall balance. At the same time, the rotor is wound with high-strength tensile materials and has strong explosion-proof ability. Detachable design for easy maintenance The motor adopts a modular detachable structure design, which is convenient for routine cleaning and maintenance, effectively prolonging the service life of the motor and maintaining the working efficiency of the motor. Motor Specs: Type: 1/10, Brushless, Sensorless Poles: 4 KV Rating: 4000 LiPo: 2-3S No Load Current: 5.3A OD: 36mm Length: 52mm Shaft Diameter: 3.175mm Shaft Length: 15mm Connectors: 4mm male Weight: 224g Front Bearing: OD13xID5xT4mm Rear Bearing: OD13xID5xT4mm Applications: 1/10 On-road, 2WD Buggy & 2WD Truck (light loads) ESC Specs: Type: 1/10, Brushless, WP, Sensorless ESC Cont./Peak Current: 120A/760A Input Voltage: 2S-4S Lipo BEC Output: Switch Mode 6V/7.4V @ 5A Input Wires: 12AWG-150MM Input Connector: XT60 Output Connectors: 4mm Gold (female) Size: 52.8x39.8x38.2mm Weight: 119g (Included wires & connectors) Firmware Upgrade: Not Supported Motors: Sensorless / Sensored Brushless Motor (only in sensorless mode) Vehicles: 1/10 Short course trucks & Monster trucks Applicable motors: 3652 & 3660 Size ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD G2 Program Box: Supported OTA Programmer: Not Supported Program Port: Separate Program Port

1.395,-

1.495,-

KJØP
-7%
Hovedbilde Hobbywing 38030209 QuicRun Combo 10BL120 - 3652SL ...
Hobbywing 38030209 QuicRun Combo 10BL120 - 3652SL ...
Art.nr: HW38030209
Copied
QuicRun Brushless WP 10BL120 G2 ESC & 3652SL G2 5400KV Motor Combo Intelligent freewheeling technology, greatly improved performance The innovative intelligent freewheeling technology enables higher driving efficiency and lower operating temperature of the ESC, and further improves the stability and reliability of the ESC. Powerful built-in BEC The ESC has a built-in BEC with a continuous current of 5A and supports a maximum output current of up to 10A. The output voltages are switchable between 6V, 7.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Efficient cooling system The integrated radiator design, combined with the patented copper thermal conduction sink on the internal power board of the ESC, facilitates the rapid conduction of internal heat to the radiator, and the fan is added to dissipate heat. These results an efficient heat dissipation system to ensure that the ESC is always in a good heat dissipation state. Capacitor Thermal Protection Capacitor thermal protection is designed and implemented into the ESC to effectively prevent capacitors from exploding and causing irreversible damages to the ESC due to overloading. Built-in capacitors Super large built-in capacitor, The built-in capacitor of the ESC is as high as 1640uF. External capacitors are not needed for 10th scale models on the market and helps improves ease of use. High protection level, all-weather operation The IP-67 waterproof Rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not ermanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Explosive Output Power The output of the motor is powerful and explosive. Taking 3652-3250KV as an example and comparing it with the same specification; there is more than 10% increase in maximum output power! Excellent performance, temperature is lowered The motor efficiency is significantly higher when comparing it with the same specification. Taking 3652-3250KV as an example, the efficiency of the rear section is 8% higher & motor temperature is lower under the same load conditions. Explosion-improved rotor design - strong and reliable The rotor is designed with front and rear aluminum end plates, which greatly improves the overall balance. At the same time, the rotor is wound with high-strength tensile materials and has strong explosion-proof ability. Detachable design for easy maintenance The motor adopts a modular detachable structure design, which is convenient for routine cleaning and maintenance, effectively prolonging the service life of the motor and maintaining the working efficiency of the motor. Motor Specs: Type: 1/10, Brushless, Sensorless Poles: 4 KV Rating: 5400 LiPo: 2S No Load Current: 6.8A OD: 36mm Length: 52mm Shaft Diameter: 3.175mm Shaft Length: 15mm Connectors: 4mm male Weight: 224g Front Bearing: OD13xID5xT4mm Rear Bearing: OD13xID5xT4mm Applications: 1/10 On-road, 2WD Buggy & 2WD Truck (light loads) ESC Specs: Type: 1/10, Brushless, WP, Sensorless ESC Cont./Peak Current: 120A/760A Input Voltage: 2S-4S Lipo BEC Output: Switch Mode 6V/7.4V @ 5A Input Wires: 12AWG-150MM Input Connector: XT60 Output Connectors: 4mm Gold (female) Size: 52.8x39.8x38.2mm Weight: 119g (Included wires & connectors) Firmware Upgrade: Not Supported Motors: Sensorless / Sensored Brushless Motor (only in sensorless mode) Vehicles: 1/10 Short course trucks & Monster trucks Applicable motors: 3652 & 3660 Size ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD G2 Program Box: Supported OTA Programmer: Not Supported Program Port: Separate Program Port

1.495,-

1.595,-

KJØP
-6%
Hovedbilde Hobbywing 38030376 EzRun Combo MAX8 G2S SD 4278SD ...
Hobbywing 38030376 EzRun Combo MAX8 G2S SD 4278SD ...
Art.nr: HW38020376
Copied
Hobbywing HW38020376 - EzRun MAX8 G2S ESC + 4278SD 2250kV Sensor Combo The esc has an innovative waterproof sensor interface,enhancing the overall waterproof and dustproof performance. It is easy to deal with the harsh conditions containing sediment, ice and snow, water accumulation. Built-in ultra-powerful switch mode BEC and support for 6V/7.4V/8.4V switching, supporting a wide range of powerful and high-voltage servos. Supports turbo timing setting, the timing response is remarkable when used with the matching motor. Multiple protection functions: battery low voltage protection, ESC and motor overheat protection, signal loss protection, current protection. The built-in (integrated in the switch) Bluetooth function allows for setting and upgrading the esc by directly connecting to the mobile app, without any additional devices, making it simpler and more convenient Data logging function to view various running data on the HW LINK app Supports the firmware upgrade of the ESC, you can enjoy the latest functions Extreme output, easy to control The ESC has power, yet smooth and linear throttle response. This balance of power and control allows drivers to drive their vehicles at the limit comfortably. Optimized hardware, increases in stability and reliability Based on the MAX8 G2 ESC, the brand new G2S ESC is equipped with optimized hardware design application such as intelligent freewheeling technology. The stability and reliability of the ESC has been further improved. Optimized hardware design Intelligent freewheeling technology Built-in Bluetooth, directly connected to the mobile APP The ESC has a built-in Bluetooth module. It allows you to connect to the mobile APP directly without plugging any device. It is simple and convenient to perform parameter settings, data reading, firmware upgrades other operations. Note: The data includes throttle amount, voltage, current, temperature, speed, etc. Built-in data logging function, ease of obtaining power operating status The ESC has a built in data recording module. Store up to 10 minutes of your most recent run. Using the HW Link V2 App, you can view the data saved to the ESC. In addition, the module allows you to view Real Time Data from the ESC for bench top testing and viewing of the data outputs. Note: Due to transmission distance of bluetooth, the effective distance is only about 5m! Intelligent fan start and stop function The ESC fan does not run when the ESC temperature is low.The fan automatically turns on when the ESC temperature reaches the preset value. The intelligent start and stop function of the fan not only reduces noise, saves power, but also ensures that the ESC works in a good temperature range. Efficient cooling system A frameless fan with patented technology is used. The large flow of air from the side of the fan effectively blows the heat away from the integrated housing radiator to ensure that the ESC is always in the optimal operating temperature. High level of protection Excellent waterproof and dust-proof performance (IP67) Cope with harsh environments, various climate conditions all-weather operation capabilities 1/8th power system turbo timing technology Turbo timing that is adjustable up to 32 degrees. Using turbo allows motor RPM to be increased through advanced ESC electronic timing. The maximum speed can be increased by approximately 25% (EzRun 4268/4278SD G2 motors) Capacitor overheating protection The Capacitor protection prevents damage to the power caps from overheating from overloads or extreme conditions. This protects the ESC from damage. Buil-in Super BEC A maximum output current of up to 15A The output voltage can be switched in three levels of 6V, 7.4V & 8.4V The built in super BEC allows racers to use high power, high voltage servos. Waterproof Sensor Harness The proven Hobbywing waterproof sensor harness provides an element proof solution for sensor based systems. Using a Hobbywing Adaptor (optional) normal/standard sensor motors can be used as well. Note: Supports normal adaptor sensored motors, it requires an additional adapter wires for other motors. Specs: Brushless, Sensored, Waterproof 1/8 ESC Cont./Peak Current: 160A/1050A Input Voltage: 3-6S Lipo BEC Output: 6V / 7.4V / 8.4V adjustable, continuous current 6A (Switch-mode) Input Wires: 10AWG-150mm Output Wires: No Input Connectors: XT90 Output Connectors: 6.5mm Bullet Connectors (Female) Fan Size: 30x30x10mm Fan Voltage Range: 6V/7.4V/8.4V Fan Powered by: BEC Size: 60x48x40.5mm Weight: 192g Firmware Upgrade: Supported ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Not Supported LCD G2 Program Box: Not Supported LCD PRO: Not Supported OTA Programmer: Not Supported Program Port: Built-in Bluetooth Data Recording: Extreme value: Supported Real-time Data: Supported Historical data (Graph): Supported   Hobbywing EzRun 4278-2250Kv 3-6S - Sensored Sport Brushless Motor EzRun 4278SD G2 Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX8 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. The rotor adopts four strong magnetic and high temperature resistant sintered Nd-Fe-B magnets, widens the magnetic tile, provides super torque, and makes the motor have strong explosive force and stable output power. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. High output efficiency, effectively reduce the motor temperature and output more power under the same load. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. EzRun 4278SD G2 Specs: Type: 1/8, sensored, brushless Pole Count: 4 KV Rating: 2250KV LiPo Cells: 3-6S No-load Current: 5.0A Diameter: 42mm Length: 78mm Shaft Diameter: 5mm Weight: 455g Front Bearing: D16xD5xT5mm Rear Bearing: D11xD5xT5mm Applications: Vehicles: 1/8 Trucks & Monster Trucks (Sport)

2.995,-

3.295,-

KJØP
-9%
Hovedbilde Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ... Hovedbilde Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...
Hobbywing EzRun Combo MAX10 G2 80A - 3652SD 4100kV G3 ...
Art.nr: HW38020347
Copied
Hobbywing Ez-Run Max10 G2 80A ESC & 3652SD G3 4100KV Motor Combo - 2-3S LiPo   ESC Sensor Upgrade, Great Throttle Response Smart technology increases heat dissipation effectiveness Larger capacitor built-in, double explosion-proof Smart freewheeling technology, higher efficiency Data logging, convenient IP67 protection, all-weather use Upgraded sensor-mode with great throttle response The EzRun Max10 G2 ESC features and improved waterproof sensored cable interface and an upgraded sensored mode to achieve a great sense of throttle respons and perfectly matches the EzRun 3652SD/3565SD G3 motors. Supports Turbo timing adjustment of up to 32 degrees, and in combination with the EzRun 3652/3665 G3, the maximum speed is 25% more. Turbo timing adjustments: 32 Degrees Speed is significantly increased up to 25% Compared to the previous generation, the MAX10 G2 has a stronger explosive force and a more stable output power, and at the same time, it has excellent low-speed linearity. Large built-in capacitor = Double explosion proof Compared to the previous generation of the Max10 ESC, the total capacitance of the capacitors are increased by 74% and is overheat protected. Improved power delivery from the battery to the ESC to avoid it from overloading and causing the capacitors to explode. Smart freewheeling technology, higher efficiency The new smart freewheeling technology enables the Max10 G2 to have higher drive efficiency that the earlier generation, resulting in lower operation temperatures and a minimum temperature of approximately 25°C lower that the previous generation. Data logging, convenient After connecting the ESC with the OTA Bluetooth module, you can view the data (throttle amount, voltage, current, temperature, speed and etc) in real time through the mobile app to know the running status; The history of the running status can also be viewed by data logging. ESC IP67 protection, all-weather use The IP-67 waterproof system guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The ESC also supports motor with ordinary sensored mode interface. Cables to be purchased separately. ESC Specs: Scale: 1/10 Type: Brushless/Sensored Waterproof: Yes (IP67) Cont./Peak Load: 180/520A Input Voltage: 2-3S LiPo BEC: 6/7.4V @ 5A Input Wires: 12AWG Output Wires: 12AWG Input Connector: XT60 Output Connector: 4mm Gold (female bullet) Fan Size: 25x25x10mm Size: 53x39.5x37.2mm Weight: 120g Firmware Upgrade: Supported ESC Programming via: SET Button on ESC: No LED Program Box: Supported LCD Program Box (G2): Supported Programming Port: Separate ESC Applications: 1/10 Vehicles: Short Course Tryucks, Stadium Trucks, & Monster Trucks (Light Loads) KV Rating 2S LiPo: ≤6000kV KV Rating 3S LiPo: ≤4200kV 3652 size motor   EZRUN 3652SD-3300KV G3 Sensored Motor The new generation adds performance. The evolution of a sensored motor, increases performance. The EzRun 3652/3665 SD G3 features an improved waterproof sensored cable interface and an upgraded sensored mode to achieve motor temperature protection and perfectly matches the EzRun MAX10 G2 ESC.   Motor Features: Chip built in the motor, when matched with Hobbywing EZRUN MAX10 G2 esc, it not only has perfect compatibility, the ESC can automatically identify the motor and build a pure/full sensor mode power system, providing better manipulating performance and more delicate manipulating feel. Compared with the previous generation motor, the output power and efficiency are increased by more than 3%. Under the same load, the motor temperature is effectively reduced. The independent high-precision encoder always outputs pure rotor position signal, which effectively avoids the interference of sensor signal and makes the motor work stably in sensor state. CNC machined aluminum housing, high purity copper windings, advanced rotor structure, 0.2mm silicon steel laminations, high-quality stainless steel output shaft, high-precision bearing for high durability and smoothness. The innovative new sensor interface and rubber cover bearing have better waterproof and dust-proof effect than the traditional sensor motor. Powerful hardware configuration, efficiency is greatly improved The high-precision Hall sensor components ensures that the rotor position output is always accurate and consistent, achieving excellent linearity and a great throttle control. The EzRun 3652/3665 G3 motor adopts a high precision bearing that is waterproof in the front end of the motor. The rear end of the motor uses precision iron cover with a smaller structure to improve the capacity, and at the same time, provides a higher bearing speed while keeping resistance low. The operation is smoother and more reliable. Compared to the G2 motor: The overall efficiency is increased by 3% More effective while the maximum output power has increased by 5% The motor temperature is greatly reduced under the same load conditions The stable power and high output of the motor, makes throttle control for maneuvers (power wheelies, straight line power, and clearing jumps) much easier. Design, quality materials, durable All the materials used on the EZRUN 3652/3665 G3 motor (Motor casing, bearings, ultra-thin silicon steel sheets, high temperature-resistance copper wire, explosion-proof rotor, high-tolerance alloy shaft) are carefully selected and approved by our in-house engineers. Hobbywing is serious in providing users with an extraordinary performance for a long period of time. The motor adopts a modular detachable structure design for easy disassembly and daily maintenance. This helps to prolong the lifespan of the motor and maintaining the efficiency of the motor simple. Applicable to All Weather & Track Conditions The IP-67 waterproof system guarantees excellent waterproofing and dustproofing protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note, the bearings are not IP rated. Motor Specs: Scale: 1/10 Type: Sensored/Brushless Pole Count: 4 KV Rating: 4100 LiPo Cells: 2-3S No-load Current: ≤5A Diameter: 37mm Length: 53mm Shaft Diameter: 3.17mm (1/8") Weight: 228g Front Bearing: D13xD5xT4mm (not IP rated) Rear Bearing: D11xD5xT5mm (not IP rated) Applications: 1/10; On-road/Off-road, Short Course 2WD Truck (Light Loads)

1.659,-

1.859,-

KJØP
-11%
Hovedbilde Hobbywing EzRun Combo MAX5 HV G2 - 56118SD 1100kV ... Hovedbilde Hobbywing EzRun Combo MAX5 HV G2 - 56118SD 1100kV ...
Hobbywing EzRun Combo MAX5 HV G2 - 56118SD 1100kV ...
Art.nr: HW38010604
Copied
EZRUN MAX5 HV G2 6-12S LiPo Sensored Brushless ESC & 56118SD G2 1100KV Motor Combo 12S HV ESC, enhanced performance The Max5 HV G2 ESC is designed to work in full-sensored mode at all times when it is paired with HOBBYWING EZRUN 56118 G2. The ESC supports up to 12s LiPo with a maximum output current of up to 250A. The strong explosive, stable output power, together with an excellent low-speed linearity, ensures the ESC meets various application requirements such as; violent start-up, straight-line high-speed, flying slopes, low-speed walking, etc. Intelligent freewheeling technology - Strong drive & Low temperatures The innovative intelligent freewheeling technology effectively reduces heat generation and enables the ESC to have higher driving efficiency. With the addition of super-high power design, operating temperature is drastically lowered (approximately 30 degrees) to improve overall stability and reliability of the ESC. Note: Under heavy load conditions, the temperature of MAX5 HV G2 is only slightly higher than that of MAX4 HV. High protection level, all-weather operation The IP-67 waterproof rating guarantees excellent waterproof and dustproof protection. The whole power system is able to drive on a variety of surfaces including mud, sand, ice, snow and water without damaging the power unit. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak for a long time to avoid damaging the product. Capacitor upgrade - More secure protection Compared with the previous generation (MAX5 ESC), the total capacity of the capacitor has increased by 45% (1260uF). The super large capacity ensures that 5th scale models do not need external capacitors. In addition, the built-in capacitor thermal protection function of the ESC is always in safe operating state. Powerful BEC The ESC has a built-in super BEC with a maximum output current of up to 25A. The output voltages are switchable between 6V/7.4V/8.4V. This ensures that the ESC is able to support the demanding high-torque servos in the market. Built-in anti-spark design - Multi-directional protection The ESC has a built-in anti-spark circuit to protect the battery plug from damaging upon using a higher voltage battery(6-12S), and avoids any injuries. Perfect combination with EZRUN 56118 SD G2 motor Achieve the perfect compatibility when used together with EzRun 56118 SD G2 motors. Avoid damaging the motor from overheating with the software protection function. Note: Non-Hobbywing EzRun 56118 SD G2 motors cannot realize motor overheat protection Record and store data in real time to keep track of the running status Connect the ESC to the OTA Bluetooth module, and through the mobile phone APP, you are able to view real-time data and operating status such as; throttle, voltage, current, temperature, speed, etc. Note: Due to the Bluetooth transmission distance, the effective distance is only about 5m! New sensor wire interface - Upgraded waterproof protection The new sensor wire interface enhances the ESC protection level and solves waterproof problems faced by traditional interfaces. Please Note: This ESC supports sensored motors with common interfaces. Sensor wire needs to be purchased separately! ESC Specs: Type: 1/5, Brushless, Sensored, WP ESC Cont./Peak Current: 250A/1600A Input Voltage: 6-12S LiPo BEC Output: 6V/7.4V/8.4V adjustable, continuous current 8A (Switch-mode) Input Wires: 8AWG-200mm Input Connectors: No Input Connectors: 8.0mm Bullet Connectors (Female) Firmware Upgrade: Supported Size: 94.5x59.4x50.9mm Weight: 428.5g (Included input wires) Motors: 56118 size motors Vehicles: 1/5 Truck & Buggy. Examples: Losi DBXL-E, Losi 5T Electrified, ARRMA Kraton 8S & ARRMA Outcast ESC Programing via: SET Button on ESC: Not Supported LED Program Box: Supported LCD Program Box: Supported OTA Programmer: Supported Program Port: Independent programming port Sensored mode - Enhanced performance The motor is strong, explosive, and has a stable output power with an excellent linearity at low speed to allow the vehicle to easily realize various maneuvers. The control is easy when there power is limitless be it violent start-up, straight-line high-speed, flying slopes, etc. The perfect match for EzRun MAX5 HV G2 ESC The motor achieves perfect compatibility when used together with the EzRun MAX5 HV G2 ESC. The ESC/Motor combination is sensored and provides a smooth and precise control experience to the users. It is equipped with overheat thermal protection function to avoid overheating the motor. High protection level - All-weather operation IP67 Rating provides excellent waterproof and dustproof performance, and can easily cope with various weather conditions and harsh environments. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Do not soak it for a long time to avoid damaging the product. New sensor wire interface - Upgraded waterproof protection The new sensor wire interface enhances the motor protection level and solves waterproof problems faced by traditional interfaces. Detachable modular design for easy maintenance The motor adopts a modular detachable structure design, which is convenient for daily cleaning and maintenance, effectively prolonging the service life of the motor and maintaining the working efficiency of the motor. Motor Specs: Type: 1/5, Brushless, Sensored Motor Poles: 4 KV Rating: 1100KV LiPo Cells: 6-8S LiPo No-load Current: 8A O.D.: 56mm Length: 119.2mm Shaft Diameter: 8mm Connectors: 8mm Male Weight: 1287g Front Bearing: OD22 x ID8 x T7mm Rear Bearing: OD19 x ID8 x T6mm ESC: EZRUN MAX5 HV G2 Vehicles: 1/5 Buggy & Truck. Examples: Losi DBXL-E & Losi 5T Electrified

4.995,-

5.295,-

KJØP
-6%
Hovedbilde Hobbywing HW38020501 XeRun XR8+ G2 & 4268 2200KV G3 ...
Hobbywing HW38020501 XeRun XR8+ G2 & 4268 2200KV G3 ...
Art.nr: 38020501
Copied
Hobbywing XeRun XR8 Plus G2S ESC & 4268SD G3 2200KV Off-Road Combo ESC Features: Durable Frame-less Fan Built-in 5 common profiles, suitable for all 1/8 Racing, select and use instantly. (e.g. Zero timing-Blinky mode, 1/8 Off-Road Racing, 1/8 On-Road Racing, 1/8 GT Racing, 1/8 Sport mode). There are 30 built-in adjustable parameters to set various power requirements. The parameters can be imported and exported, which is convenient for drivers to communicate with and learn from each other. Supports the firmware upgrade of the ESC (The multi-function LCD programming box or OTA Programmer is needed to purchase). You can enjoy the latest functions. Supports 48 degrees Boost and Turbo timing. When matching with XERUN 4268/4274 G3 motor, the Max. Speed can be promoted by 50%, easily win your rival. Multiple function: Low voltage protection, thermal protection of the ESC, motor and capacitor. Built-in switch mode BEC with a maximum output of 15A and voltage adjustable from 6V to 8.4V (step: 0.1V) for usage with servos & other devices require different voltages. The built-in reverse connection protection circuit of the ESC avoid the damage to the ESC due to reverse connection. The record function of real-time data: Open this function by connecting the ESC with HW Link (OTA Programmer is needed to purchase) and mobile App can check throttle quantity, Voltage, Current, Temperature, RPM and other data in real time, and obtain the running status of the ESC and motor. The record function of off-line data: It can not only read out the extreme value data such as the maximum temperature of the esc and motor,maximum RPM of the motor through the LCD program box or HW link app (OTA Programmer is needed to purchase), but also view the historical running data (graph) in the data record in HW link app (OTA Programmer is needed to purchase ESC Specs: Cont./Peak Current: 200A / 1080A Motor Type: Sensored / Sensorless Brushless Motors Applications: 1/8 On-Road/Off-Road/Truggy Racing LiPo Cells: 2-6S LiPo BEC Output: 6-8.4V Adjustable, Continuous/Peak Current: 6A/15A (Switch-mode) Cooling Fan: Powered by the stable BEC voltage of 6-8.4V Size: 56.1(L) x 42.1(W) x 38.5(H)mm Weight: 122g (W/O Wires) Connectors: No Programming Method: Multifunction LCD Program Box, OTA Programmer Motor Specs: Application: 1/8 Off-Road Type: Sensored Brushless Poles: 4 KV Rating: 2200 LiPo Cells: 2-6S No Load: 4.1A Case Diameter: 42mm Case Length: 67.8mm Shaft Diameter: 5mm Shaft Length: 18.5mm Weight: 285g Front Bearing: 5x5x16mm Rear Bearing: 5x5x11mm Timing: 20-40° (adjustable)

4.595,-

4.795,-

KJØP
-4%
Viser 1 til 25 (av 29 produkter)

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png