Børste/Brushed

Hobbywing 30404314 QuicRun 540 Brushed Motor - 40T

Art.nr: 30404314

Copied

Hobbywing QuicRun Brushed 540-40T Outstanding Response and Control The new Quicrun brushed motors offer improved performance, reliability, and response over other motors. With improved materials and overall design, these motors offer significant power gains. Excellent efficiency With up to 69% maximum efficiency, the Quicrun brushed motors far exceed standard motors of the same specifications (555-11T). The maximum efficiency is up to 17% higher. These new motors run cooler (Lower temps) than similar motors under the same load. Zero-cogging torque design The 555 motor adopts a 5-slot design, and the motor cogging effect is virtually eliminated. These new motors have a very small torque fluctuation and, bring a very linear response at all speeds for an improved overall drive feel. Adjustable mechanical timing of the motor The mechanical timing of the motor can be adjusted by -20 — 20 °. This allows users to fine-tune the RPM and feel of motors. Timing adjustments also allow the motors to be used for CCW and CW applications. Specialized Carbon Brush for extended life Developed specifically for these motors, the new brushes feature a custom blend to provide extremely long life, while providing great performance. These motors start to compare to brushless motors in terms of life span. Modular design for easy service and cleaning The motors feature an easy-to-service rebuildable design. Convenient for cleaning and maintenance, effectively prolonging the life span and maintaining the efficiency of the motor. PCB anti-interference board The motor is equipped with a dual PCB anti-interference board. These reduce the harmful spikes and noise from affecting your speed control. Quality materials To ensure high tolerance to abuse and heavy-duty driving, a 200°C high-temperature resistant magnet, 180°C high-temperature resistant copper wire has been used. Combined with 0.35 mm (only 555) ultra-thin silicon steel sheet, and the Hobbywing custom carbon brush, these motors are built to handle the demands of today's driver. Quicrun 540-40T Brushed Specs: Scale: 1/10 Applications: Crawler, On-Road, Buggy, 2WD Truck Turns: 40T RPM @ 7.4V: 10.500 Input volt: Max 12.6V Slots: 3 Outside Dia: 36mm Length: 53.2mm Shaft Dia: 3.17mm Weight 169g

295,-

315,-

KJØP

-6%

Hobbywing 38020349 QuicRun Combo 1080 G2 - 540 30T ...

Art.nr: 38020349

Copied

Hobbywing QuicRun WP 1080 G2 Crawler ESC + 540-30T Brushed Crawler Motor Combo Four running modes are available - Fits a variety of control habits and control needs: Forward with brakes Forward & reverse with brakes Forward & reverse Real car running mode The first ”Real Car Mode” The direction of the motor is switchable in real time by using the idle channel on the transmitter. Pull the trigger for "forward" Push the trigger for "brake" Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver) This new feature will provide the user with a unique experience unlike any other. Multiple, easy to set parameters 15 Programmable Items let's drivers easily tune their vehicle with the LED Programming Box connected to the programming port. Temperature control upgrade The New design reduces operating temperatures of the ESC by about 15 degrees improving reliability. The ESC also has a fan mount to meet additional cooling needs BEC Upgrade The BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market. IP67 Protection IP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Features: Fully waterproof design for all conditions. (Note: please clean and dry it after use for avoiding rusty connectors) HOBBYWING patented copper heat-conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the CNC-machined aluminum reticular heat sink for great heat dissipation. High reliable electronic switch design prevents mechanical switch failure due to dirt, water, dust and etc. Tunable drag brake and drag brake rate for different vehicles, tracks and control feel. Adjustable PWM frequency combined with advanced freewheeling (/DEO) technology guarantees great throttle linearity and driving feel. Innovative real car mode, make the downhill control of the vehicle more stable, and provide new fun for the car. It has the function of using transmitter (AUX channel) to adjust the drag brake force in real time, and switch the drag brake force anytime and anywhere according to the demand. Multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection. Separate programming port to easily connect the LED program card to the ESC. Single-button ESC programming and factory reset. ESC programming via Hobbywing LED program card Specifications: Type: 1/10, Brushed, Waterproof ESC Cont./Peak Current: 80A/400A Input Voltage: 2-3S Lipo / 5-9S NiMH BEC Output: 6/7.4/8.4V @ 4 (6A Peak) Input Wires: 14AWG-200mm Output Wires: 14AWG-200mm Input Connector: XT60 Output Connectors: 4.0mm Bullet Connectors (Female) Size: 37.2x31.9x18.4mm Weight: 70.2g (w/Wires) Motors: 540 & 550 Size Brushed Motors Vehicles: 1/10 Rock Crawlers Firmware Upgrade: Not Supported ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD G2 Program Box: Not Supported OTA Programmer: Not Supported Program Port: Separate Quicrun 540-30T Brushed Specs: Scale: 1/10 Applications: Crawler, On-Road, Buggy, 2WD Truck Turns: 30T RPM @ 7.4V: 14.000 Input volt: Max 12.6V Slots: 3 Outside Dia: 36mm Length: 53.2mm Shaft Dia: 3.17mm Weight 168g

995,-

1.095,-

KJØP

-9%

Hobbywing 38020350 QuicRun Combo 1080 G2 - 540 40T ...

Art.nr: 38020350

Copied

Hobbywing QuicRun WP 1080 G2 Crawler ESC + 540-40T Brushed Crawler Motor Combo Four running modes are available - Fits a variety of control habits and control needs: Forward with brakes Forward & reverse with brakes Forward & reverse Real car running mode The first ”Real Car Mode” The direction of the motor is switchable in real time by using the idle channel on the transmitter. Pull the trigger for "forward" Push the trigger for "brake" Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver) This new feature will provide the user with a unique experience unlike any other. Multiple, easy to set parameters 15 Programmable Items let's drivers easily tune their vehicle with the LED Programming Box connected to the programming port. Temperature control upgrade The New design reduces operating temperatures of the ESC by about 15 degrees improving reliability. The ESC also has a fan mount to meet additional cooling needs BEC Upgrade The BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market. IP67 Protection IP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Features: Fully waterproof design for all conditions. (Note: please clean and dry it after use for avoiding rusty connectors) HOBBYWING patented copper heat-conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the CNC-machined aluminum reticular heat sink for great heat dissipation. High reliable electronic switch design prevents mechanical switch failure due to dirt, water, dust and etc. Tunable drag brake and drag brake rate for different vehicles, tracks and control feel. Adjustable PWM frequency combined with advanced freewheeling (/DEO) technology guarantees great throttle linearity and driving feel. Innovative real car mode, make the downhill control of the vehicle more stable, and provide new fun for the car. It has the function of using transmitter (AUX channel) to adjust the drag brake force in real time, and switch the drag brake force anytime and anywhere according to the demand. Multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection. Separate programming port to easily connect the LED program card to the ESC. Single-button ESC programming and factory reset. ESC programming via Hobbywing LED program card Specifications: Type: 1/10, Brushed, Waterproof ESC Cont./Peak Current: 80A/400A Input Voltage: 2-3S Lipo / 5-9S NiMH BEC Output: 6/7.4/8.4V @ 4 (6A Peak) Input Wires: 14AWG-200mm Output Wires: 14AWG-200mm Input Connector: XT60 Output Connectors: 4.0mm Bullet Connectors (Female) Size: 37.2x31.9x18.4mm Weight: 70.2g (w/Wires) Motors: 540 & 550 Size Brushed Motors Vehicles: 1/10 Rock Crawlers Firmware Upgrade: Not Supported ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD G2 Program Box: Not Supported OTA Programmer: Not Supported Program Port: Separate Quicrun 540-40T Brushed Specs: Scale: 1/10 Applications: Crawler, On-Road, Buggy, 2WD Truck Turns: 40T RPM @ 7.4V: 10.500 Input volt: Max 12.6V Slots: 3 Outside Dia: 36mm Length: 53.2mm Shaft Dia: 3.17mm Weight 169g

995,-

1.095,-

KJØP

-9%

Hobbywing 38020351 QuicRun Combo 1080 G2 - 555 11T ...

Art.nr: 38020351

Copied

Hobbywing QuicRun WP 1080 G2 Crawler ESC + 555-11T Brushed Crawler Motor Combo Four running modes are available - Fits a variety of control habits and control needs: Forward with brakes Forward & reverse with brakes Forward & reverse Real car running mode The first ”Real Car Mode” The direction of the motor is switchable in real time by using the idle channel on the transmitter. Pull the trigger for "forward" Push the trigger for "brake" Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver) This new feature will provide the user with a unique experience unlike any other. Multiple, easy to set parameters 15 Programmable Items let's drivers easily tune their vehicle with the LED Programming Box connected to the programming port. Temperature control upgrade The New design reduces operating temperatures of the ESC by about 15 degrees improving reliability. The ESC also has a fan mount to meet additional cooling needs BEC Upgrade The BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market. IP67 Protection IP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Features: Fully waterproof design for all conditions. (Note: please clean and dry it after use for avoiding rusty connectors) HOBBYWING patented copper heat-conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the CNC-machined aluminum reticular heat sink for great heat dissipation. High reliable electronic switch design prevents mechanical switch failure due to dirt, water, dust and etc. Tunable drag brake and drag brake rate for different vehicles, tracks and control feel. Adjustable PWM frequency combined with advanced freewheeling (/DEO) technology guarantees great throttle linearity and driving feel. Innovative real car mode, make the downhill control of the vehicle more stable, and provide new fun for the car. It has the function of using transmitter (AUX channel) to adjust the drag brake force in real time, and switch the drag brake force anytime and anywhere according to the demand. Multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection. Separate programming port to easily connect the LED program card to the ESC. Single-button ESC programming and factory reset. ESC programming via Hobbywing LED program card Specifications: Type: 1/10, Brushed, Waterproof ESC Cont./Peak Current: 80A/400A Input Voltage: 2-3S Lipo / 5-9S NiMH BEC Output: 6/7.4/8.4V @ 4 (6A Peak) Input Wires: 14AWG-200mm Output Wires: 14AWG-200mm Input Connector: XT60 Output Connectors: 4.0mm Bullet Connectors (Female) Size: 37.2x31.9x18.4mm Weight: 70.2g (w/Wires) Motors: 540 & 550 Size Brushed Motors Vehicles: 1/10 Rock Crawlers Firmware Upgrade: Not Supported ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD G2 Program Box: Not Supported OTA Programmer: Not Supported Program Port: Separate Quicrun 555-11T Brushed Specs: Scale: 1/10 Applications: Crawler, Short Course, Truck Turns: 11T RPM @ 7.4V: 17.000 Input volt: Max 10V Slots: 5 Outside Dia: 36mm Length: 58.5mm Shaft Dia: 3.17mm Weight 193g

995,-

1.095,-

KJØP

-9%

Hobbywing 38020352 QuicRun Combo 1080 G2 - 540 13T ...

Art.nr: 38020352

Copied

Hobbywing QuicRun WP 1080 G2 Crawler ESC + 555-13T Brushed Crawler Motor Combo Four running modes are available - Fits a variety of control habits and control needs: Forward with brakes Forward & reverse with brakes Forward & reverse Real car running mode The first ”Real Car Mode” The direction of the motor is switchable in real time by using the idle channel on the transmitter. Pull the trigger for "forward" Push the trigger for "brake" Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver) This new feature will provide the user with a unique experience unlike any other. Multiple, easy to set parameters 15 Programmable Items let's drivers easily tune their vehicle with the LED Programming Box connected to the programming port. Temperature control upgrade The New design reduces operating temperatures of the ESC by about 15 degrees improving reliability. The ESC also has a fan mount to meet additional cooling needs BEC Upgrade The BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market. IP67 Protection IP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Features: Fully waterproof design for all conditions. (Note: please clean and dry it after use for avoiding rusty connectors) HOBBYWING patented copper heat-conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the CNC-machined aluminum reticular heat sink for great heat dissipation. High reliable electronic switch design prevents mechanical switch failure due to dirt, water, dust and etc. Tunable drag brake and drag brake rate for different vehicles, tracks and control feel. Adjustable PWM frequency combined with advanced freewheeling (/DEO) technology guarantees great throttle linearity and driving feel. Innovative real car mode, make the downhill control of the vehicle more stable, and provide new fun for the car. It has the function of using transmitter (AUX channel) to adjust the drag brake force in real time, and switch the drag brake force anytime and anywhere according to the demand. Multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection. Separate programming port to easily connect the LED program card to the ESC. Single-button ESC programming and factory reset. ESC programming via Hobbywing LED program card Specifications: Type: 1/10, Brushed, Waterproof ESC Cont./Peak Current: 80A/400A Input Voltage: 2-3S Lipo / 5-9S NiMH BEC Output: 6/7.4/8.4V @ 4 (6A Peak) Input Wires: 14AWG-200mm Output Wires: 14AWG-200mm Input Connector: XT60 Output Connectors: 4.0mm Bullet Connectors (Female) Size: 37.2x31.9x18.4mm Weight: 70.2g (w/Wires) Motors: 540 & 550 Size Brushed Motors Vehicles: 1/10 Rock Crawlers Firmware Upgrade: Not Supported ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD G2 Program Box: Not Supported OTA Programmer: Not Supported Program Port: Separate Quicrun 555-11T Brushed Specs: Scale: 1/10 Applications: Crawler, Short Course, Truck Turns: 13T RPM @ 7.4V: 14.000 Input volt: Max 12.6V Slots: 5 Outside Dia: 36mm Length: 58.5mm Shaft Dia: 3.17mm Weight 193g

995,-

1.095,-

KJØP

-9%

Hobbywing QuicRun 1060 ESC 60A (Brushed) 2-3S Car 1/10

Art.nr: 30120201

Copied

QuicRun 1060, 60A børsteregulator som er vann og støv beskyttet. Passer til de fleste 1:10 biler med børsteoppsett, leveres med Tamiya batterikontakt og programmeres enkelt via jumper. Kan brukes med 2-3s LiPo eller 7,2V - 10,8V NiMh batterier. Størrelse 35,5 x 32,18 x 18mm Vekt 39g

389,-

429,-

KJØP

-9%

Hobbywing QuicRun 540 Brushed Motor - 30T

Art.nr: 30404313

Copied

Hobbywing QuicRun Brushed 540-30T Outstanding Response and Control The new Quicrun brushed motors offer improved performance, reliability, and response over other motors. With improved materials and overall design, these motors offer significant power gains. Excellent efficiency With up to 69% maximum efficiency, the Quicrun brushed motors far exceed standard motors of the same specifications (555-11T). The maximum efficiency is up to 17% higher. These new motors run cooler (Lower temps) than similar motors under the same load. Zero-cogging torque design The 555 motor adopts a 5-slot design, and the motor cogging effect is virtually eliminated. These new motors have a very small torque fluctuation and, bring a very linear response at all speeds for an improved overall drive feel. Adjustable mechanical timing of the motor The mechanical timing of the motor can be adjusted by -20 — 20 °. This allows users to fine-tune the RPM and feel of motors. Timing adjustments also allow the motors to be used for CCW and CW applications. Specialized Carbon Brush for extended life Developed specifically for these motors, the new brushes feature a custom blend to provide extremely long life, while providing great performance. These motors start to compare to brushless motors in terms of life span. Modular design for easy service and cleaning The motors feature an easy-to-service rebuildable design. Convenient for cleaning and maintenance, effectively prolonging the life span and maintaining the efficiency of the motor. PCB anti-interference board The motor is equipped with a dual PCB anti-interference board. These reduce the harmful spikes and noise from affecting your speed control. Quality materials To ensure high tolerance to abuse and heavy-duty driving, a 200°C high-temperature resistant magnet, 180°C high-temperature resistant copper wire has been used. Combined with 0.35 mm (only 555) ultra-thin silicon steel sheet, and the Hobbywing custom carbon brush, these motors are built to handle the demands of today's driver. Quicrun 540-30T Brushed Specs: Scale: 1/10 Applications: Crawler, On-Road, Buggy, 2WD Truck Turns: 30T RPM @ 7.4V: 14.000 Input volt: Max 12.6V Slots: 3 Outside Dia: 36mm Length: 53.2mm Shaft Dia: 3.17mm Weight 168g

249,-

279,-

KJØP

-11%

Hobbywing QuicRun WP 1080 G2 ESC 80A (Brushed) 1/10 ...

Art.nr: HW30120202

Copied

QuicRun WP 1080 G2 ESC 80A (Brushed) 1/10 Crawler 2-3S Four running modes are available - Fits a variety of control habits and control needs: Forward with brakes Forward & reverse with brakes Forward & reverse Real car running mode The first ”Real Car Mode” The direction of the motor is switchable in real time by using the idle channel on the transmitter. Pull the trigger for "forward" Push the trigger for "brake" Pull the trigger with the "reverse channel" on will give you "reverse" (Requires an open channel on the receiver) This new feature will provide the user with a unique experience unlike any other. Multiple, easy to set parameters 15 Programmable Items let's drivers easily tune their vehicle with the LED Programming Box connected to the programming port. Temperature control upgrade The New design reduces operating temperatures of the ESC by about 15 degrees improving reliability. The ESC also has a fan mount to meet additional cooling needs BEC Upgrade The BEC Upgrade includes maximum output to 6A and provides 6V/7.4V/8.4V output options to support most of the servos on the market. IP67 Protection IP67 Standard for being waterproof and dust-proof for various weather conditions, and driving surfaces. Note: The IP67 protection level mentioned above is splash-resistant, water-resistant and dust-resistant under normal use, and is tested under controlled laboratory conditions. Its effect is in the GB / T 4208-2017 (domestic) / IEC 60529 (overseas) standard to IP67 level. Splash, water and dust resistance are not permanently effective, and the level of protection may decline due to aging. Features: Fully waterproof design for all conditions. (Note: please clean and dry it after use for avoiding rusty connectors) HOBBYWING patented copper heat-conductive plates attached to the MOSFET board allows the internal heat to be quickly transferred to the CNC-machined aluminum reticular heat sink for great heat dissipation. High reliable electronic switch design prevents mechanical switch failure due to dirt, water, dust and etc. Tunable drag brake and drag brake rate for different vehicles, tracks and control feel. Adjustable PWM frequency combined with advanced freewheeling (/DEO) technology guarantees great throttle linearity and driving feel. Innovative real car mode, make the downhill control of the vehicle more stable, and provide new fun for the car. It has the function of using transmitter (AUX channel) to adjust the drag brake force in real time, and switch the drag brake force anytime and anywhere according to the demand. Multiple protections: low-voltage cutoff protection, thermal protection, and throttle signal loss protection. Separate programming port to easily connect the LED program card to the ESC. Single-button ESC programming and factory reset. ESC programming via Hobbywing LED program card Specifications: Type: 1/10, Brushed, Waterproof ESC Cont./Peak Current: 80A/400A Input Voltage: 2-3S Lipo / 5-9S NiMH BEC Output: 6/7.4/8.4V @ 4 (6A Peak) Input Wires: 14AWG-200mm Output Wires: 14AWG-200mm Input Connector: XT60 Output Connectors: 4.0mm Bullet Connectors (Female) Size: 37.2x31.9x18.4mm Weight: 70.2g (w/Wires) Motors: 540 & 550 Size Brushed Motors Vehicles: 1/10 Rock Crawlers Firmware Upgrade: Not Supported ESC Programing via: SET Button on ESC: Supported LED Program Box: Supported LCD G2 Program Box: Not Supported OTA Programmer: Not Supported Program Port: Separate 30120202

699,-

749,-

KJØP

-7%

Tamiya/ Hobbywing 1060 RTR 60A Brushed ESC WP

Art.nr: HBW1060RTR

Copied

Easy Operation This ESC is specially designed for new beginners and intermediate modelers; it not only carries forward the outstanding quality of HOBBYWING products but simplifies the operation. Applicable to All Weather Conditions The waterproof and dust-proof design allows the QUICRUN WP-1060 Brushed to be used in all weather conditions without any issue of damage caused to the ESC from water or dust. High Reliability & Durability Reliable hardware combined with advanced software technology allows the QUICRUN WP 1060 Brushed to not only provide high power output but also overload protection of the ESC circuit. Easy to Use This ESC features auto throttle calibration and parameter setting via jump caps is easy-to-use, especially applicable to new beginners. Wide Application This ESC is designed for 1/10th scale touring cars, buggies, short-course trucks, monster trucks, trucks, crawlers and tanks. Waterproof Cont./Peak Current - 60A/360A Input - 2-3S LiPo/5-9 Cells NiMH BEC Output - Switch Mode:6V/3A Motor Limit - 2S Lipo or 6 NiMH - 540 or 550 Size Motor: 12T or RPM 30000 - 7.2V 3S Lipo or 9 NiMH - 540 or 550 Size Motor: 18T or RPM 20000 - 7.2V Input Wires - Red-16AWG-100mm/Black-16AWG-100mm Output Wires - Blue-16AWG-100mm/Yellow-16AWG-100mm Input Connectors - Big-sized TAMIYA Connector Output Connectors - 4.0 Bullet Connectors (Female) Size - 36.5x32.0x18.0mm Weight - 39g Motors - Brushed Motors Suitable for: 1/10 Touring Car, Buggy, Short Course, Truck, Monster, Truggy, Rock Crawler and Tank. This item is supplied in supass packaging. It is a 100% genuine HobbyWing speed controller..

399,-

429,-

KJØP

-7%

Børste/Brushed

Populært i denne kategorien

SamiRC Norge AS

Om oss

Kundeservice

Totalt:

Søkeresultater

Børste/Brushed

Populært i denne kategorien

Totalt:

Tamiya El-biler

Kyosho-Biler

Mini-Z

Carson

Tamiya Lastebiler

Reservedeler til Lastebil

Reservedeler til Hengere

E-flite RC

Traxxas & Latrax Reservedeler

Sendere

Spektrum sendere

Spektrum mottakere

Mottakere

Spektrum Mottakere

Telemetri

Hitec

Servoer

Servoer etter størrelse

Reservedeler

Option-parts

Option Parts Biler

Tamiya Biler

Servo anbefalinger til biler

Maverick biler

Traxxas biler

Kyosho biler

Mini-Z biler

Tamiya biler

HPI Biler

Redcat

Servo anbefalinger til båt

Crawler motor & regulator

Børsteløs/Brushless

Børsteløs combo

Børsteløs motor

Børsteløs Bil motor

Børsteløs regulator

Reservedeler til motorer

Flymotorer

OS motorer

Lipo

Lipo 3 celler 11.1 volt

3 celler sortert etter plugg

Lipo 4 celler 14,8 volt

4 celler sortert etter plugg

NiMH

Mottakerbatteri

Batteri etter produsent

LiFe

Traxxas Biler

Traxxas 68086-4 Slash 4x4 VXL

Traxxas Båter

Alle fly

Redcat Biler

Maverick biler

Kyosho biler

Kyosho Mini-Z

HPI biler

Reservedeler etter Produsent

Traxxas El-Biler

Arrma

Traxxas Nitro-Biler

Tamiya El-Biler

TT-01

Axial El-Biler

SCX10 Honcho

Kyosho-El-biler

Mini-Z deler

Kyosho Fazer D2 FZD2

Utgåtte Kyosho biler

Kyosho Nitro Biler

RC4WD-Biler

Vaterra-Biler

WL-Toys

HAIBOXING Biler

Helion-biler

BSD Biler