Hopp til innhold

Lys

 
Art.nr: 80923
Copied
This is an optional RPM Roof Mount Light Bar Set in Chrome.     FEATURES Designed for the Traxxas Slash, Associated SC10, HPI Blitz and any  vehicle with a minumum 6" (152mm) wide roof  Constructed of chrome plated plastic with clear plastic lenses  Can accomodate LED light set (not included) instructions cover  installation of LEDs   INCLUDES Light Bar, Mounting Plate, Body Mounts, Six each Canisters Lenses  and Guards, Mounting Hole Template all Hardware and Instructions   REQUIREMENTS Installing on roof of body following included instructions   SPECIFICATIONS  Length: 5.6" (142mm)  Mounted Height: 1.5" (38mm) including bracket  Lens Diameter: 0.57" (14.4mm)

259,-

Kontakt oss for mer informasjon om dette produktet
Ikke på lager
Art.nr: 53909
Copied
 This is the Tamiya LED Light Unit (TLU-01). FEATURES: Black plastic housing           Connections for up to eight sets of lights           Can be run off an ESC or separate battery source           On/off switch on the face of the housing INCLUDES: One LED light unit           Two white and two red colored 5mm lights           Two pieces of servo tape           Two cable clips           Four tie wraps           Instruction sheet SPECS:    Length:           1.59"          (40mm)           Width:            1.70"          (43mm)           Height:            .85"          (21mm)

549,-

579,-

** Ikke på lager
KJØP
-5%
Art.nr: 53910
Copied
This is a pair of LED White Lights for use with the                    Tamiya TLU-01 LED Light Unit FEATURES: Can be installed on many R/C cars, boats, helicopters  and airplanes             for added realism INCLUDES: Two Tamiya LED White Lights with white 2-pin connector REQUIRES: Connecting to TLU-01 LED Light Unit SPECS:    Wire Lead Length: 16"           Diameter: (5mm) COMMENTS: Not for use with the 1/14 scale Tamiya electric R/C Big Truck Series.

185,-

På lager 8
KJØP
Art.nr: 53911
Copied
 This is a pair of LED Red Lights for use with the                    Tamiya TLU-01 LED Light Unit FEATURES: Can be installed on many R/C cars, boats, helicopters  and airplanes             for added realism INCLUDES: Two Tamiya LED Red Lights with white 2-pin connector REQUIRES: Connecting to TLU-01 LED Light Unit SPECS:    Wire Lead Length: 16"           Diameter: (5mm) COMMENTS: Not for use with the 1/14 scale Tamiya electric R/C Big Truck Series.

129,-

På lager 2
KJØP
Art.nr: 53912
Copied
This is a pair of LED Orange Lights for use with the                    Tamiya TLU-01 LED Light Unit FEATURES: Can be installed on many R/C cars, boats, helicopters  and airplanes             for added realism INCLUDES: Two Tamiya LED Orange Lights with white 2-pin connector REQUIRES: Connecting to TLU-01 LED Light Unit SPECS:    Wire Lead Length: 16"           Diameter: 0.12" (3mm) COMMENTS: Not for use with the 1/14 scale Tamiya electric R/C Big Truck Series.

139,-

** Ikke på lager
KJØP
Art.nr: 53937
Copied
The Tamiya LED Light Control Unit TLU-02 enables various light effects when used with separately available Tamiya LED lights and LED Light Unit (TLU-01). The unit enhances overall appearance and realism of your electric radio control touring car. A total of 16 sets (32 lights) of LED Lights can be lit up by connecting two TLU-01 units. Set-up is similar to an ESC and is simple to understand even for beginners. • Requires transmitter, battery, TLU-01 unit and LED lights (not included). • Select headlights, position and fog lights to reproduce realistic evening and night driving. • Brake, backup lights and blinkers can be activated according to transmitter operation. • Hazard lights flash after car stops. • Realistic passing lights. • Lights flash during acceleration. • Siren-like LED Lights. • Unidirectional flashing of 8 LED Lights. • Back and forth flashing of 8 LED Lights.     Den brukes til å gjøre LED-lysene på RC-bilen mer realistiske og koble dem til funksjonene på fjernkontrollen.  Hva kan den styre? 💡 Hovedlys og parklys 🔴 Bremselys ⚪ Ryggelys 🟠 Blinklys 🚨 Nødblink 🔦 «Passing»-lys/blink med fjernkontrollen ✨ Blinkende/flimrende lys 🚓 Sirene-/utrykningslys 🔄 Løpelys/sekvensielle LED-effekter Den kan styre opptil 32 LED-er dersom du kobler til to TLU-01-enheter.  Viktig: TLU-02 er ikke komplett alene. Den er laget for å brukes sammen med Tamiya TLU-01 LED Light Unit (53909) og LED-lys

749,-

949,-

** Ikke på lager
KJØP
-21%
Art.nr: 54008
Copied
These are the 3mm LED White Lights for use with the Tamiya TLU-01 LED Light Unit. FEATURES Can be installed on many R/C cars, boats, helicopters and airplanes for added realism INCLUDES Two Tamiya 3mm LED White Lights with white 2-pin connector REQUIREMENTS Connecting to TLU-01 LED Light Unit SPECIFICATIONS Wire Lead Length: 16" (406mm) Diameter: 0.12" (3mm) COMMENTS Not for use with the 1/14 scale electric R/C Tractor Truck Series

119,-

På lager 2
KJØP
Art.nr: 54009
Copied
Designed for use with the TLU-01 Light Unit, this is the 3mm Diameter Red LED Light Set from Tamiya. FEATURES 16" long lead with two 3mm diameter Red LED Lights on the end Factory installed connector designed to fit the TLU-01 Light Unit Allows modelers to dress up almost any model body INCLUDES One LED Light Set with Two 3mm Diameter Red LEDs One Adhesive Backed Wire Clip REQUIREMENTS A Tamiya TLU-01 Light Unit and installation SPECIFICATIONS Length: 16" (405mm) Diameter: .20" (5mm) COMMENTS Will not work with the Tamiya 1/14 Scale Tractor Truck Models

119,-

** Ikke på lager
KJØP
Art.nr: 54010
Copied
Designed for use with the TLU-01 Light Unit, this is the 3mm Diameter Blue LED Light Set from Tamiya. FEATURES 16" long lead with two 3mm diameter Blue LED Lights on the end Factory installed connector designed to fit the TLU-01 Light Unit Allows modelers to dress up almost any model body INCLUDES One LED Light Set with Two 3mm Diameter Blue LEDs One Adhesive Backed Wire Clip REQUIREMENTS A Tamiya TLU-01 Light Unit and installation SPECIFICATIONS Length: 16" (405mm) Diameter: .20" (5mm) COMMENTS Will not work with the Tamiya 1/14 Scale Tractor Truck Models

109,-

På lager 1
KJØP
Art.nr: 54011
Copied
Designed for use with the TLU-01 Light Unit, this is the 5mm Diameter Yellow LED Light Set from Tamiya. FEATURES 16" long lead with two 5mm diameter yellow LED Lights on the end Factory installed connector designed to fit the TLU-01 Light Unit Allows modelers to dress up almost any model body INCLUDES One LED light set with two 5mm diameter yellow LEDs One adhesive backed wire clip REQUIREMENTS A Tamiya TLU-01 light unit and installation SPECIFICATIONS Length: 16" (405mm) Diameter: .20" (5mm) COMMENTS Not for use with the Tamiya 1/14 Scale Electric Tractor Truck Series

109,-

På lager 3
KJØP
Art.nr: 54012
Copied
Designed for use with the TLU-01 Light Unit, this is the 5mm Diameter Blue LED Light Set from Tamiya. FEATURES 16" long lead with two 5mm diameter Blue LED Lights on the end Factory installed connector designed to fit the TLU-01 Light Unit Allows modelers to dress up almost any model body INCLUDES One LED Light Set with Two 5mm Diameter Blue LEDs One Adhesive Backed Wire Clip REQUIREMENTS A Tamiya TLU-01 Light Unit and installation SPECIFICATIONS Length: 16" (405mm) Diameter: .20" (5mm) COMMENTS Will not work with the Tamiya 1/14 Scale Tractor Truck Models

109,-

På lager 2
KJØP
Art.nr: 54013
Copied
Diameter: 5mm Usable With Only for LED Light Unit (TLU-01) Not for use with 1/14 Electric R/C Tractor Truck Series Connect to the TLU-01 LED light unit. Featuring IC chip, the light flashes red, green and blue in random order

189,-

På lager 5
KJØP
Art.nr: 54014
Copied
Diameter: 5mm Usable With Only for LED Light Unit (TLU-01) Not for use with 1/14 Electric R/C Tractor Truck Series Connect to the TLU-01 LED light unit. Featuring IC chip, the light altermately flashes red, green and blue

189,-

På lager 5
KJØP
Art.nr: 54599
Copied
Description: This 3mm Halogen White LED light recreates a halogen shade reminiscent of that on classic autos, and the two sizes can be employed to depict headlights, fog lamps, position lights, reverse lamps and so on. Feature: Use with Item 53909 Material: Plastic Color: White Package contains 2 high-brightness LEDs which can be effortlessly connected to the Tamiya TLU-01 Light Control Unit NOTE: Not compatible with Multi-Function Control Units Items 53957, 56511 and 56523 Include: Tamiya LED Light φ3 Halogen White (1 set)

139,-

På lager 2
KJØP
Art.nr: 54600
Copied
Description: This is Tamiya LED Light 5mm Halogen White. Feature: Color: White Specification: Length: 5mm Include: Tamiya LED Light 5mm Halogen White (1 set)

139,-

På lager 2
KJØP
Art.nr: 10005
Copied
  1.Electric vehicle / oil motor car installation:         2.Power supply using special attachment plug,the receiver power supply:voltage of 4.8-6V,connected to a power supply start lighting.                                  3.From 360 degrees direction equalization astigmatism,high irradiation,the lights of the latest technology.                                             4.Widely used for accident handing vehicle,simulation lights.       

239,-

På lager 1
KJØP
Art.nr: TRX 10156
Copied
Traxxas 10156 LED light harness, front (fits #10151 bumper) (requires #2263 Y-harness) Raptor R™ front LED light harness (requires 2263 Y harness) Replacement part for these models: Ford® F-150® Raptor R™ 4X4

119,-

139,-

På lager 1
KJØP
-14%
Art.nr: TRX 10190
Copied
Traxxas 10190 - Ford Raptor® R™ LED Light Kit Extreme Scale Detail The Traxxas Ford® Raptor R™ set a new standard for replica scale detail in 1/10 scale short course trucks. With so much attention devoted to the Raptor R’s beautiful clipless body, it’s only fitting to add an LED light kit for even greater realism. The Raptor R LED light kit includes a replacement front bumper with integrated LED light bar and mounts for the Raptor’s existing running lights. Four bright LED headlights also come in the kit to fit the Raptor R’s existing headlight lenses. The LED light kit is fully waterproof for all-weather fun and includes wiring harness and zip ties. Accessory part for these models: Ford® F-150® Raptor R™ 4X4

369,-

389,-

På lager 4
KJØP
-5%
Art.nr: TRX 10191
Copied
Traxxas 10191 LED Light Headlights Raptor R

109,-

129,-

På lager 1
KJØP
-16%
Art.nr: TRX 10290
Copied
Traxxas 10290 - High-Intensity Maxx Slash LED Light Kit QUICK FEATURES ON MAXX SLASH LED LIGHT KIT (10290): ­Compatible with Velineon VXL-6s ESC Fully functioning brake lights that work in both forward and reverse direction Fully waterproof Three default lighting modes controlled from the power amplifier Low and high beam brightness settings Easy to install with simplified, concealed, color-coded wiring Includes front and rear bumpers with LED cutouts Firmware updatable through the app App-controlled lighting functions:* - Turn lights on/off remotely - Build a custom dashboard - Customize lighting configurations and actions - Add additional lighting components Maxx Slash redefines speed, durability and toughness with its innovative design and massively overbuilt chassis. Only Traxxas could design an LED light kit worthy of the Maxx Slash's extreme performance. Built to handle brutal real-world punishment, this light kit is waterproof and built Traxxas Tough™ for maximum fun. Blaze a path through the night with this intense-white high-output LED light kit. Traxxas innovation delivers features and performance not found on any other lighting system. The included high voltage amplifier packs the muscle to efficiently power the high-power light bar, while minimizing losses from excessive current and heat. The tightly regulated output provides stable lighting performance, without flickering or dimming as the battery voltage changes. The smart brake lights work when brakes are applied in both forward and reverse directions. This eliminates the common and annoying problem with generic aftermarket systems that turn on the brake lights while reversing. ­ MAXX SLASH LED LIGHT KIT (10290) INCLUDES: High-output front LED light bar Multi-function rear LED light bar Replacement bumpers with LED cutouts High-voltage 8-channel power amplifier for intense, brilliant LED lighting Regulated output for stable lighting performance (no flickering or dimming as the battery voltage changes) Mounting hardware

1.249,-

1.349,-

På lager 3
KJØP
-7%
Art.nr: TRX 3791
Copied
Traxxas 3791 LED Lights Front (Requires Bumper #3735) Bandit, Rustler 2WD LED light bar, front (assembled)/ 3x8 BCS (2)/ 2.5x8 BCS (2) (requires #3735 front bumper for 2WD Rustler® or Bandit®) Replacement front LED light bar for #3794 LED Light Set.

239,-

259,-

På lager 2
KJØP
-8%
Art.nr: TRX 5684
Copied
This is the LED Lightbar with Harness and Adapter for use on the                   Traxxas Summit Truck RTR. FEATURES: Plastic construction           Chrome in color           JST Connectors           Clear LED Lights INCLUDES: Four LED Lights           Two Zip Ties           One Y-Harness           Instructions REQUIRES: Installation on the vehicle

185,-

På lager 1
KJØP
Art.nr: TRX 5687
Copied
This is the Center Harness and Wire Clip for the LED Lights               used on the Traxxas Summit Truck 1/10 FEATURES: JST Connectors INCLUDES: One Center Harness           One Wire Clip           Three Zip Ties REQUIRES: Installation on vehicle

69,-

79,-

På lager 2
KJØP
-13%
Art.nr: TRX 5688
Copied
This is the Rear LED Lights Harness for use on the                   Traxxas Summit Truck RTR. FEATURES: JST Connector INCLUDES: One Rear Harness           Six Clear LED Lights           Three Zip Ties           One Wire Clip REQUIRES: Installation on the vehicle

119,-

På lager 4
KJØP
Art.nr: TRX 5689
Copied
This is the Front LED Light Harness for use on the                   Traxxas Summit Truck 1/10 FEATURES: JST Connector           Clear LED Lights INCLUDES: Four LED Lights           Two Zip Ties REQUIRES: Installation on the vehicle

99,-

På lager 2
KJØP
Art.nr: TRX 5696
Copied
This is the Traxxas Y-Harness for the Servo and LED Lights on the Summit 2.4Ghz.

75,-

På lager 2
KJØP
Art.nr: TRX 6588X
Copied
Accessory power supply (regulated, 3V, 3 amp)/ power tap connector (with cable)/ 3x10 BCS (2)/ 2.6x8 BCS (2)

219,-

På lager 1
KJØP
Art.nr: TRX 7285A
Copied
Light up the trail with this powerful LED light kit for the 1/16 scale Summit. With four LEDs on the front bumper and another four on top of the roll cage, Summit illuminates the path ahead. Dual red LEDs in the rear bumper and dual high-mounted tail lights let you track Summit’s progress from behind. A tightly regulated power supply prevents flickering and dimming to keep your lights bright from the start of your run till the end. The system is fully waterproof to keep pace with your wildest adventures and the installation hardware comes with the kit.   LED light kit, 1/16th Summit (power supply, chrome lightbar, roof light harness (4 clear, 2 red), chassis harness (4 clear, 2 red), wire ties, mounts)

459,-

479,-

På lager 2
KJØP
-4%
Art.nr: TRX 8035A
Copied
LED Light Kit Complete Ford F-150/Bronco (1979) 8035A - LED light set, complete with power supply (contains headlights, tail lights, side marker lights, & distribution block) (fits #8010 or 9230 series bodies) LED light set, complete with power supply (contains headlights, tail lights, side marker lights, & distribution block) (fits #8010 or 9230 series bodies) Replacement part for these models: TRX-4® 1979 Ford® Bronco® TRX-4® Ford® F-150® High Trail Edition™

899,-

999,-

På lager 2
KJØP
-10%
Art.nr: TRX 8036R
Copied
LED Light Set (w/o Power Supply #8028) Ford F-150/Bronco (1979) LED light set (contains headlights, tail lights, side marker lights, and distribution block) (fits #8010 or 9230 series bodies, requires #8028 power supply) The TRX-4® LED Light set for 1979 Ford® Bronco and F-150® bodies takes scale realism to the next level with LED headlights, tail lights, and side markers. Fully waterproof and built Traxxas-Tough, the LED light set is ready for your wildest RC crawling adventures. Includes distribution block. (fits 8010-series and 9230-series bodies) Requires 8028 power supply. (Sold Separately)

689,-

749,-

På lager 1
KJØP
-8%
Art.nr: TRX 8085X
Copied
Traxxas 8085X TRX-4 Sport Pro Scale® LED Light Set All the lighting control of a full-scale truck is at your fingertips with the Pro Scale® LED Light Set for your TRX-4® Sport. Turn the headlights on and off and select high or low beams. Signal for turns with automatic cancellation or put on the hazard lights. The brake lights glow when you slow or stop. Hit reverse, and backup lights glow automatically. For maximum power and convenience, add Traxxas Link and the optional Wireless Module (Part #6511, sold separately) to configure your lights right from your iOS or Android device. The Pro Scale system makes it easy. Pro Scale® Light Set Features: Headlights with high/low beam settings Brake lights Reverse lights Turn signals with auto-cancellation Hazard lights Set Includes: Complete LED light Set Pro Scale Lighting Power Module and mount Pro Scale Lighting Distribution Block and mount Motor sensors wire harness Front and rear light harness Receiver communication cable Installation hardware  

1.249,-

1.349,-

På lager 1
KJØP
-7%
Art.nr: TRX 8090
Copied
TRX-4 K5 Blazer Light Kit ( LED Light Set Complete Blazer Resto-Mod (Body #9111X/9112X) )     The Traxxas TRX-4 Chevrolet K5 Blazer ushered in a new era of scale performance and realistic detail. The new LED Light Kit (#8090) fits both the classic 1969 and 1972 Blazer bodies with next-level scale realism featuring working headlights, tail lights, and side markers. Fully waterproof and ready for rugged trail duty, the LED light kit delivers great looks and Traxxas-Tough durability. No matter where the trail leads, day or night, the TRX-4 Chevrolet Blazer leads the way. QUICK FEATURES ON TRX-4 BLAZER LED LIGHT KIT (#8090) Sealed waterproof design High / low headlight setting Precision-engineered for direct fit on 1969 and 1972 Blazer bodies Plug and play design with modular connectors Traxxas LED lighting module Regulated to provide consistent and reliable power output with batteries from NiMH to 3S LiPo Eliminates overheating, glitching, and other electronics issues common with unmatched aftermarket systems Clear headlight lenses with reflectors, red tail lights, and amber side markers The Blazer light kit’s modular design make it easy to install and accessorize. The light kit includes all the necessary hardware and installation takes only a few minutes. Adding rock lights is easy thanks to the power block’s modular design. Make the most out of your TRX-4 Blazer with a Traxxas LED light kit.   Rock Light Kit (#8026X) Traxxas LED Rock Lights #8026X install directly into the inner fenders and are positioned to help illuminate obstacles for trouble-free nighttime crawling. The kit includes two LED modules per wheel, ensuring a flood of light throughout the underside of the truck. Down lighting in the wheel wells combined with the headlight/taillight kit make it easy to see the orientation of the vehicle in the dark.

769,-

799,-

På lager 1
KJØP
-4%
Art.nr: TRX 9291
Copied
LED Front Light Harness Pro Scale TRX-4 Ford Bronco 2021 Front light harness, Ford Bronco (requires #6592 lighting power module and #6593 distribution block) Replacement front light harness for the 9290 TRX-4® Ford® Bronco Pro Scale® LED Light Set. Requires 6592 power module and 6593 distribution block.

259,-

279,-

På lager 1
KJØP
-7%
Art.nr: TRX 9292
Copied
LED Rear Light Harness Pro Scale TRX-4 Ford Bronco 2021 Rear light harness, Ford Bronco (requires #6592 lighting power module and #6593 distribution block) Replacement rear light harness for the 9290 TRX-4® Ford® Bronco Pro Scale® LED Light Set. Requires 6592 power module and 6593 distribution block.

369,-

399,-

På lager 3
KJØP
-8%
Art.nr: TRX 9380
Copied
Traxxas 4-Tec 3-0 Corvette Stingray LED Light Kit Extreme Scale Details! The Traxxas 4-Tec 3.0 Corvette Stingray set the standard for replica scale detail in 1/10 RC models. With so much attention devoted to the Stingray’s beautiful clipless body, it’s only fitting to offer an LED light kit for even greater realism. The Corvette Stingray LED light kit fits into the body’s color-molded lenses for a perfect factory look and it’s fully waterproof for all-weather fun. Day or night, this LED kit completes the look of your Corvette Stingray with exacting scale detail.

299,-

På lager 1
KJØP
Art.nr: TRX 9790
Copied
Traxxas 9790 - TRX-4M Trailer Light Kit The Trailer Light Kit adds working brake and reverse lights to the TRX-4M™ utility trailer. Give your trailer and extra dose of scale realism with this all-inclusive kit. The light kit is fully compatible with TRX-4M’s standard bumper lights and the Pro Scale® Light Set. Trailer lights are easy to install with the included mounting hardware and replica tool box. Everything is completely waterproof for worry-free driving in any environment. TRX-4M Trailer Light Kit Features: Working brake and reverse lights Fully waterproof Compatible with existing TRX-4M light kits Simple installation with all mounting hardware included

299,-

329,-

På lager 1
KJØP
-9%
Art.nr: TRX 9862X
Copied
Traxxas 9862X Roll bar (assembled with LED lights) (fits #9811 or 9812 series bodies) Add more scale detail to your 9811-series TRX-4M™ K10 body with this chrome roll bar with working LED lights.

249,-

279,-

På lager 1
KJØP
-11%
Art.nr: TRX 9863
Copied
Traxxas 9863 Wire harness, LED lights (fits #9862 roll bar) Add more scale detail to your TRX-4M™ by replacing the replica lights in the 9862 roll bar with these bright LED lights. Includes wiring harness.

119,-

På lager 2
KJØP
Art.nr: UDI-1601-003
Copied
UDI-1601-003 Headlights

139,-

På lager 2
KJØP
Art.nr: YA-0370BK
Copied
Yeah Racing 1/10 Aluminum Roof 5 White LED Light Set Black For RC Truck Crawler Description: This is the Yeah Racing 1/10 Aluminum Roof 5 White LED Light Set Black For RC Truck Crawler #YA-0370BK. With this set of LED lights, you will bring your crawler into the dark and have a show down at night! With adjustable mount, you can adjust the angle of the lights to which degree it pleases you. Metallic Black color aluminum outer case makes it durable for wear and tear, also adding coolness to your crawler with style.   *Photos for reference only. Feature: For: RC Truck Crawler Material: Aluminum Color: Black Adjustable LED Bucket Angle Lenght: 127mm Bucket Diameter: 23mm LED Diameter: 5mm Include: 1/10 Aluminum Roof 5 White LED Light Set Black (1 set)

279,-

299,-

** Ikke på lager
KJØP
-7%
Art.nr: YA-0370RD
Copied
1/10 Aluminum Roof 5 White LED Light Set Red For RC Truck Crawler Description: This is the Yeah Racing 1/10 Aluminum Roof 5 White LED Light Set Red For RC Truck Crawler #YA-0370RD. With this set of LED lights, you will bring your crawler into the dark and have a show down at night! With adjustable mount, you can adjust the angle of the lights to which degree it pleases you. Metallic red color aluminum outer case makes it durable for wear and tear, also adding coolness to your crawler with style.   Feature:   For: RC Truck Crawler Material: Aluminum Color: Red Adjustable LED Bucket Angle Total Lenght: 127mm Screw Hole to Hole : 123mm Bucket Diameter: 23mm LED Diameter: 5mm   Include:   Yeah Racing 1/10 Aluminum Roof 5 White LED Light Set (1 set)

279,-

299,-

På lager 2
KJØP
-7%
Art.nr: YA-0507BK
Copied
Yeah Racing 1/10 Aluminum White LED Light Bar Black for Crawler 'G6 Certified' Description: Ultra bright 18 LED light bar for your custom crawler project! Comes with mounting bracket to mount this light bar to your body/bumper with four screws! Power cable comes attached with both JST and Yeah Racing's Dark Drifter LED Main unit plug for you to choose from. Feature: For: Offroad R/C Material: Aluminum Light bar Width: 145mm Color: Black Led : White Voltage : 7.2V Include: LED Light Bar (1 pc) LED Light Bar Mount (1 pc) Screws (6 pcs)

219,-

** Ikke på lager
KJØP
Art.nr: YA-0692RD
Copied
1/10 Aluminum White Super Bright LED Light Bar 85mm Red For RC Truck Crawler Super bright LED bar in aluminum housing for durability on rough trails when flipping your rig over!   Features: Material : Aluminum Color : Red Voltage : 7V to 12V Led : White Total Length : 85mm   Includes: Light Bar (1 pc) Mounting Bracket (1 pc)

209,-

229,-

** Ikke på lager
KJØP
-9%
Art.nr: YA-0567RD
Copied
Yeah Racing 1/10 Aluminum White Super Bright LED Light Bar Red w/Two Set Mount for 1/10 RC Truck Crawler Description: Aluminum frame LED lightbar with mounts to install on crawler body or on your bumper! The bumper mount is a simple triangle screw mount which you could also DIY to fit onto your body as you see fit! Accepts a wide input voltage from 7.2v all the way to 12v! *Photos for reference only. Feature: For: 1/10 RC Truck Crawler Bodies Material: Aluminum Color: Red Voltage:7V to 12V Include: 159mm LED Light bar (1 pc) 165mm LED Light bar(Mount to Mount) (1 pc) Jeep Body Mount (2 pcs) DIY Triangle Mount (2 pcs) Mounting Hardware (1 pack)  

349,-

399,-

På lager 1
KJØP
-13%
Art.nr: LK-0001WT
Copied
Ultra Bright F/R LED Light Kit for 1/10 EP & GP 

99,-

På lager 6
KJØP
Art.nr: LK-0002
Copied
This Light Kit included: Features 1 x Main Box 1 x Blue LED Light Set (2 x 5mm Blue LED Bulb) 1 x Red LED Light Set (2 x 5mm Red LED Bulb) 1 x White LED Light set (2 x 5mm White LED Bulb) 1 x Yellow LED Light Set (2 x 5mm Yellow LED Bulb) easy installation flexible to switch connection to 7 different flashing modes and interchange of accessories maximum connection to 6 sets of LED lights(2 sets are flashing slots) 4 - solid on slots 2 - hlashing slots Input: 6V  

189,-

** Ikke på lager
KJØP
Art.nr: LK-0004BU
Copied
Ultra bright BLUE LED with long wire x 1 ,    For: Yeah Racing NaviHawk Light,  Yeah Racing NaviHawk Light Kit

39,-

På lager 5
KJØP
Art.nr: LK-0004RD
Copied
Ultra bright RED LED with long wire x 1 ,    For: Yeah Racing NaviHawk Light,  Yeah Racing NaviHawk Light Kit

39,-

** Ikke på lager
KJØP
Art.nr: LK-0004WT
Copied
Ultra bright WHITE LED with long wire x 1 ,    For: Yeah Racing NaviHawk Light,  Yeah Racing NaviHawk Light Kit

39,-

** Ikke på lager
KJØP
Art.nr: LK-0004YW
Copied
Ultra bright YELLOW LED with long wire x 1 ,    For: Yeah Racing NaviHawk Light,  Yeah Racing NaviHawk Light Kit

39,-

På lager 6
KJØP
Viser 51 til 100 (av 124 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png