Hopp til innhold

Slash 1/10 2WD VXL

Populært i denne kategorien

 
Art.nr: TRX 3936
Copied
 This is a 4x10mm Button Head Screw Set for the Traxxas Revo vehicle. FEATURES: Steel construction           Black in color           Low-profile, button-head design           Hex drive (allen type) INCLUDES: Six Screws REQUIRES: Assembly to vehicle SPECS:    Overall Length:  16mm (.63")           Threaded Length: 10mm (.39")           Thread Size:     M4x.7mm coarse           Hex Wrench Size  2.5mm COMMENTS: Used on the Revo to mount the Electronics Box.

35,-

KJØP
Art.nr: TRX 4686
Copied
This is a Traxxas 48P, 86T Spur Gear for models with                        Torque Control Slipper Clutch. FEATURES: 48 pitch           86 tooth           Designed for models with a slipper clutch.           Black plastic construction INCLUDES: One spur gear SPECS:    Pitch:   48           Tooth:   86

39,-

KJØP
Art.nr: TRX 5462
Copied
 This is the GTR Shock Rebuild Kit by Traxxas. FEATURES: Shock rebuild parts INCLUDES: Four blue plastic shock pistons           Two blue rubber diaphragms           Four black plastic shock ends           Two piston lock nuts           Four metal X-rings COMMENTS: This set will rebuild two shocks

59,-

KJØP
Art.nr: TRX 5822
Copied
This is the Gray Nylon Chassis for the Traxxas Slash 2WD FEATURES: Gray composite nylon construction INCLUDES: One chassis for the Traxxas Slash REQUIRES: Installing all components onto the chassis SPECS:    Length: 338mm (13.3")           Width: 189mm (7.44")           Height: 23mm (0.91")           Thickness: 0.08" (2mm)

209,-

KJØP
Art.nr: TRX 5823
Copied
These are the replacement Nerf Bars for the Traxxas Slash. FEATURES: Black plastic construction INCLUDES: Two Nerf Bars for the Traxxas Slash REQUIRES: Installation onto Vehicle

49,-

Ikke på lager
Art.nr: TRX 5827X
Copied
This extended battery hold down for the Slash or Slash 4x4 allows for lipo packs of up to 42mm tall to fit in the stock tray. Allows for installation of taller, multi-cell batteries

75,-

KJØP
Art.nr: TRX 5835
Copied
This is the Front Bumper and Mount for the        Traxxas Slash 1/10 2WD Short Course Racing Truck RTR. FEATURES: Nylon construction           Black in color INCLUDES: One Front Bumper and bumper mount REQUIRES: Installation on the Traxxas Slash

129,-

KJØP
Art.nr: TRX 5836
Copied
his is the Rear Bumper and Mount for the        Traxxas Slash 1/10 2WD Short Course Racing Truck FEATURES: Nylon construction           Black in color INCLUDES: One Rear Bumper and bumper mount REQUIRES: Installation on the Traxxas Slash  

129,-

KJØP
Art.nr: TRX 5837
Copied
This is the Front and Rear Skidplate for the Traxxas Slash 2WD    This skidplate bolts to the Chassis and the Bulkheads TRX 5530     and provides protection to the front differential. FEATURES: Skidplate is constructed of high impact molded black plastic           Front of skidplate kicks up at about 40 degrees to shield the             differential from crash damage or hard landings from jumps INCLUDES: One front skidplate           One rear skidplate REQUIRES: Installing on chassis

99,-

KJØP
Art.nr: TRX 5857
Copied
These are the Front Shock Springs for the Traxxas Slash FEATURES: Metal construction, prgressive rate           White in color INCLUDES: Two Front Shock Springs REQUIRES: Installation on the Traxxas Slash SPECS:    Length, uncompressed: 58mm (2.28")           Wire Diameter: 1.4mm (0.05")           Inner Diameter: 15.5mm (0.61")  

55,-

KJØP
Art.nr: TRX 5858
Copied
These are the Rear Shock Springs for the Traxxas Slash FEATURES: Metal construction           White in color INCLUDES: Two Shock Springs REQUIRES: Installation on the Traxxas Slash SPECS:    Length, uncompressed: 69.5mm (2.74")           Wire Diameter: 1.4mm (0.05")           Inner Diameter: 15.5mm (0.61")  

59,-

KJØP
Art.nr: TRX 6528
Copied
This is the Traxxas TQi 2-Channel 2.4GHz Transmitter Receiver and Servos not Included. FEATURES Can be equipped with the Traxxas Link Wireless Module TRX 6511 and used with the iPhone, iPad or iPod touch* to create a graphical user interface for the vehicle Simple two-button programming interface Built-in failsafe Automatic model recognition recalls settings for up to 30 Traxxas Link enabled models Adjustable throttle and steering endpoints Multi-Function knob can be programmed to control Steering Sensitivity Throttle Sensitivity, Steering Percentage, Braking Percentage, or Throttle Trim INCLUDES Traxxas TQi 2-Channel 2.4GHz Transmitter REQUIREMENTS AA Batteries: Four for transmitter Servos and receiver of modeler's choice COMMENTS * Traxxas Link Wireless Module is not included and must be purchased separately.

995,-

1.095,-

KJØP
-9%
Art.nr: TRX 6828
Copied
Denne blir erstattet med TRX 6828X     These are the Heavy Dyty Differential Output Yokes for the                          Slash 4x4 from Traxxas FEATURES: Black plastic construction INCLUDES: 2 Ouput yokes           2 screw pins REQUIRES: Installation on vehicle

Art.nr: TRX 6850X
Copied
This is the Heavy Duty Half Shaft Set for the Slash 4x4 from Traxxas FEATURES: Black plastic and steel construction INCLUDES: 2 external splined half shafts           2 internal splined half shafts           4 metal u-joints REQUIRES: Installation on vehicle

99,-

KJØP
Art.nr: TRX 6853X
Copied
These are the Rear Heavy Duty Stub Axles for the Slash 4x4 from Traxxas FEATURES: Aluminum construction INCLUDES: 2 rear stub axles           2 pins REQUIRES: Installation on vehicle

75,-

KJØP
Art.nr: TRX 6877
Copied
This is the Gear Cover/Motor Wire Hold Down for use on the                              Traxxas Slash 4X4. FEATURES: Nylon construction           Black in color INCLUDES: One Gear Cover           One motor wire hold down REQUIRES: Installation on the vehicle

59,-

69,-

KJØP
-14%
Art.nr: TRX 6880
Copied
This is the Rear Differential Housing for the Traxxas Slash 4x4. FEATURES: Hardened plastic construction Black in color INCLUDES: Two rear differential housing halves REQUIRES: Installation around diff components

49,-

59,-

KJØP
-17%
Art.nr: TRX 6966
Copied
Traxxas 6966 - Clipless Latch Mounts Latch mounts/ retainers (front & rear, left & right) Complete set of front and rear latch mounts and retainers for 1/10 scale Slash clipless bodies. Extra-wide retainers keep a firm hold on the body and reduce pull-though damage associated with body clips. Requires 6967 body latch mounts (sold separately). Replacement part for these models: Slash 4X4 Ultimate Slash 4X4 VXL Slash VXL Slash Accessory part for these models: Slash 2WD Unassembled Kit Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slash® 4X4 Brushless

89,-

KJØP
Art.nr: TRX 6967
Copied
Traxxas 6967 Latch, body mounts (front & rear) Front and rear Slash clipless body mounts secure to 6966 clipless latch mounts and retainers (sold separately) for a firm hold on the body. Clipless body mounts require require 6940 body mounts for 2WD Slashes and 6976 and 10125 body mounts and adapters for 4X4 Slashes (both sold separately). Replacement part for these models: Slash® 4X4 Ultimate (Clipless) Slash® 4X4 VXL (Clipless) Slash® VXL (Clipless) Slash® (Clipless) Accessory part for these models: Slash 2WD Unassembled Kit Slash 4X4 Ultimate Slash 4X4 VXL Slash 4X4 Slash VXL Slash Slash® 4X4 Brushless

119,-

KJØP
Art.nr: TRX 9480A
Copied
Traxxas 9480A Differential assembly (complete) (fits Pro Series Magnum 272R™ Transmission) This pre-assembled differential is ready-to-install in any Magnum 272R™ transmission. The sealed differential comes filled with grease for smooth hard-charging action. The differential will also accept silicone differential fluid which may be used to vary the limited-slip performance. Use ultra-thick 500k fluid for drag racing applications. Includes 10x15 mm bearings. Does not fit standard Magnum 272™ transmission. Replacement part for these models: Bandit® VXL Rustler® VXL Slash VXL Stampede® VXL Accessory part for these models: Drag Slash

549,-

599,-

KJØP
-8%
Art.nr: BULK TRX 3762A
Copied
*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 3762A Ultra Shocks (2) Rear Denne passer til: -Bandit XL5/VXL bak. -Rustler XL5/VXL bak. -og til flere Traxxas biler. Sjekk manualen til din bil.   This is a pair of the Ultra Shocks for the Traxxas Bandit, Rustler, Stampede 2WD, E-Maxx, T-Maxx and Slash 2WD.   INCLUDES: This is a complete assebled set taken out from a new bandit. It just need to be installed  COMMENTS: Two pairs are required if replacing all shocks.

219,-

Ikke på lager
Art.nr: TRX 1589
Copied
Traxxas Double-sided Adhesive Foam Tape 25x25mm (2) Double-sided foam tape for mounting radio gear

25,-

KJØP
Art.nr: TRX 1633
Copied
This is a assortment of e-clips, c-clips, and body clips for the Traxxas line of cars and trucks. INCLUDES: 28 of the 2.5mm E-clips, 2 of the 3mm E-clips, 3 of the 5mm E-clips,           4 of the shock C-clips and 3 body clips.

29,-

39,-

KJØP
-26%
Art.nr: TRX 1765
Copied
   These rubber cap diaphragms for Traxxas plastic shocks, also work well with Associated aluminum shocks. Qty-4

29,-

KJØP
Art.nr: TRX 1935
Copied
These are replacement 36mm turnbuckles for Traxxas trucks. Includes: 2- 36mm threaded turnbuckles w/nut for easy adjustment.           2- 2x6,2.5mm thick  aluminum spacers Comment: The spacers are for spacing the ball end away from the transmission          bulkhead.

25,-

KJØP
Viser 26 til 50 (av 132 produkter)
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png