Hopp til innhold

WL-12428-0114 Screw 2.5x8 Flat

Art.nr: 12428.0114.001

29,-

WLToys

WLToys

På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Produsent

WLtoys - Stor produsent av radiostyrte produkter innenfor lekesegmentet.

Kunder kjøpte også

This is a 1.75 oz bottle of Air Filter Oil from Traxxas. FEATURES: Used to treat foam air filter elements to increase their filtering             capacity, and extend engine life.           1.75 fluid ounce bottle provides oil for many applications, and is             still small enough to fit easily into a field bag or tool box. INCLUDES: One 1.75 oz bottle of Air Filter Oil           One applicator tip REQUIRES: Working oil into foam air filter element and squeezing out the excess SPECS:    Fluid Ounce: 1.75 oz (50cc)           Bottle Size-            Height:   3.5" (89mm)            Diameter: 1.5" (38mm)

69,-

Ikke på lager
This is a package of three Air Filter Foam Inserts for the Traxxas 2.5 engine and 3.3 FEATURES Constructed of foam and pre-oiled to trap dirt INCLUDES Three Air FIlter Inserts for the Traxxas 2.5 and 3.3 engine REQUIREMENTS Installing in air filter boot on engine SPECIFICATIONS Height: 0.87" (22mm) Diameter: 0.98" (35mm)

79,-

89,-

KJØP
-11%
Crosshair Body Mounting Kit Have you ever painted up a killer race body, only to botch the mounting job by aligning it off-center, crooked, or too far forward or back on your chassis? We’ve got a tool for you! The PROTOform Crosshair Body Mounting Kit uses high-powered magnets to pinpoint the exact position of your car’s body posts. This simple but effective system is designed to ensure your race body is mounted just the way you intended. Here’s how it works: Place a Crosshair Body Post Cap on each of your chassis’ 4 body posts, securing them in place with a body clip. (Not included) Place your painted body on top of the posts, centering it from left to right as well as determining the fore/aft position, which can affect handling characteristics. (Standard position would be to center the front wheel opening trim line to the front axle of your chassis) Hold a Marking Magnet on the outside of your body close to where the body posts are. The magnet will attach itself to the precise position. Mark your body post position through the hole on the Marking Magnet with a fine-tip marker. Drill your body post holes on the marked locations with a body reamer or power drill Voila! All the hassle and guesswork of mounting your race body is taken out of the equation. Now you can hit the track in style. To finish off the perfectly trimmed body, combine the Crosshair with the Better Edge System: Sanding Drum and Sanding Block! Features: Designed specifically for mounting painted r/c car bodies Pinpoint accuracy from high-powered magnets Made from high-quality red-anodized aluminum with convenient storage box Fits most on-road chassis body posts (6 mm post diameter) Included: Crosshair Body Post Caps (4 pcs) Marking Magnets (4 pcs) Storage Box

439,-

469,-

KJØP
-6%
This Grease is specially formulated for ball type differential gearing. It helps prolong component life while still maintaining the proper tansmission

89,-

KJØP
Antenna, tube, black (1)/ vinyl antenna cap (1)/ wire retainer (1)

29,-

KJØP
Hanger Metal Wire for Exhaust System Hanger, metal wire (for tuned pipe)/ 4mm GS (1)/ 4x10 BCS (1)

29,-

KJØP
Traxxas 6716 Body Washers Foam Set Body washers, foam, 2mm (4)/ 3mm (4)/ 4mm (4) Adhesive-backed foam body washers help protect your custom paint work by providing a cushion between the body and body post for more secure mounting and less rattling.

29,-

KJØP
SET SCREW M4x4mm (4pcs) 2.0mm Hex Socket Genuine HPI quality spare part for easy maintenance and repairs. See below for kit reference.

49,-

KJØP
OptiFuel 101909K - After-Run Oil 50ml This is a bottle of after-run oil suitable for all internal combustion engines (mostly run on methanol/nitro based fuels). The oil also works good as an engine assemble oil. Directions: After a day of running the engine - empty the fuel tank of most of it's fuel. Leave enough fuel for the engine to be able to run a couble of minutes at idle speed. Start the engine, let it idel and reach working temp and let it idle until the remaning fuel in the tank is empty, as in the engine stops by istelf. Try starting the engine again until you are sure that there is no more fuel in the tank/fuel lines or the engine itself. Remove the glowplug and remove any airfilter system. Add a few drops of OptiFuel after-run oil through the glowplug hole and the carburettor opening. Spin the engine carefully/slowly a few times to spead the oil inside the engine and bearings. Inspect the glowplug and check it's condition - replace if needed. Re-install the glowplug. If your engine has an airfilter system (car engines) - clean it and/or replace it. If it's a "wet oil" filter - re-apply the foam with a special airfilter oil. Re-install the airfilter.

89,-

99,-

KJØP
-10%
Flange Shaft 6x5.2mm

49,-

59,-

KJØP
-17%
WLToys 144001.1253.001 C Cell

45,-

KJØP
Universal Drive Shaft

69,-

79,-

KJØP
-13%
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png