Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / 82246-4 TRX-4 1979 Ford Bronco / Traxxas 8083 LED Light Pro Scale Advanced Installation Kit TRX-4

Traxxas 8083 LED Light Pro Scale Advanced Installation Kit TRX-4

Art.nr: TRX 8083

169,-

Traxxas

Traxxas
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

TRX4 Sport - Pro-Scale LED Installation Kit 

Traxxas 8083 LED Light Pro Scale Advanced Installation Kit TRX-4 Sport

Installation kit, Pro Scale® Advanced Lighting Control System, TRX-4® Sport (includes mount, rear lens, reverse lights and turn signal harnesses, hardware)

Kit contents:

  • Distribution block mount (1)
  • Reverse light lens, left & right
  • Turn signal harness (1)
  • Reverse lights LED wiring harness (1)
  • Jumper (1)
  • LED front bumper light bar high/low adapter (1)
  • LED roof light bar high/low adapter (1)
  • 2.6x8mm button-head cap screws (2)
  • Double-sided adhesive foam tape
  • Zip tie mount (3)
  • Zip ties (5)

Tools required:

  • 2.0mm hex wrench

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Hovedbilde Traxxas 6591 LED Kit Pro Scale Advanced Lighting ... Hovedbilde Traxxas 6591 LED Kit Pro Scale Advanced Lighting ...
Traxxas 6591 LED Kit Pro Scale Advanced Lighting ...
Art.nr: TRX 6591
Copied
Traxxas 6591 - Pro Scale Lighting Kit Traxxas LED lighting sets the standard for adventure after dark with authentic shadow-chasing brightness on the trail. Now, Traxxas LED lighting is even more realistic with the new Pro Scale Advanced Lighting Control System. The Pro Scale system puts you in command of high- and low-beam headlights; turn signals; brake lights; reverse lights; and even hazard signals for the ultimate in scale off-roading. Kit Contents: Pro Scale Lighting Power Module Power module chassis mount Pro Scale Lighting Distribution Block Motor sense wire harness Breakaway cable (part of the distribution block) MAXX® Link cable (Data Link) (TQi Radio System only) Receiver communication cable 2.6x8mm button-head cap screw (2) 2.5x10mm countersunk cap screw (1) 2.5x12mm cap screw (1) 2.5x18mm cap screw (1) Zip ties (10) Silicone grease Tools required: 2.0mm hex wrench (part #3415, sold separately) Wire cutters (to trim zip ties) Small needle nose pliers *Requires Traxxas Link App (available in the Apple App Store™ or on Google Play™) and TQi transmitter with the Traxxas Link Wireless Module (part #6511, sold separately).

649,-

699,-

KJØP
-7%
Hovedbilde Traxxas 8085 LED Head- and Tail Light Kit with Power ...
Traxxas 8085 LED Head- and Tail Light Kit with Power ...
Art.nr: TRX 8085
Copied
  TRX-4 Sport LED LIGHT KIT (#8085) Genuine Traxxas LED light kits for the TRX-4 Sport are engineered with the same outstanding quality and attention to detail as the truck itself. Precise Traxxas fit and finish makes installation easy and fun for any skill level, and the waterproof design allows for all-weather adventure after the sun goes down. An injection molded grill and tailgate with integrated lenses adds scale detail and rugged functionality. FEATURES: Sealed waterproof design Engineered by Traxxas for direct fit on the TRX-4 Sport body with tidy and secure wire management Color-coded power distribution block for easy and secure connections Includes front grill and rear tailgate with integrated lenses Traxxas LED lighting module: Regulated to provide consistent and reliable power output with batteries from NiMH to 3S LiPo Eliminates overheating, glitching, and other electronics issues common with unmatched aftermarket systems #8085 Kit Contents: LED lighting module Distribution block Front grill Front grill retainer Headlights harness assembly Headlight clamps (2) Tailgate panel Tailgate panel retainer Tail lights harness assembly Tail light clamps (2) 2.5x8mm button-head screws (8) 2.6x8mm button-head screws (2) 2.5x10mm button-head screws (2) 2.5x15mm cap screws (2) Zip tie mount (3) Zip ties (3) Body templates

739,-

769,-

KJØP
-4%
Hovedbilde Traxxas 8086 LED Expedition Rack Scene Light Kit TRX-4 ...
Traxxas 8086 LED Expedition Rack Scene Light Kit TRX-4 ...
Art.nr: TRX 8086
Copied
LED expedition rack scene light kit (fits #8111 body, requires #8028 power supply) #8086 Kit Contents (parts #8120 or #8120X required, sold separately): Expedition rack scene lights harness assembly 2.5x8mm cap screws (8) Zip tie mount (1) Zip tie (1)

199,-

219,-

KJØP
-9%
Hovedbilde Traxxas 8087 Led Bar Roof Lights TRX-4 Sport
Traxxas 8087 Led Bar Roof Lights TRX-4 Sport
Art.nr: TRX 8087
Copied
LED light bar, roof lights (fits #8111 body, requires #8028 power supply) #8087 Kit Contents (parts #8120 or #8120X required, sold separately): LED roof light bar 2.5x8mm cap screws (2) Zip tie mount (1) Zip tie (1)

259,-

KJØP
Hovedbilde Traxxas 8088 LED Front Bumper Light Bar TRX-4 Sport
Traxxas 8088 LED Front Bumper Light Bar TRX-4 Sport
Art.nr: TRX 8088
Copied
INFORMATION LED light bar, front bumper (fits #8124 front bumper, requires #8028 power supply) Blaze a path ahead with the bumper-mounted LED light bar. The light bar mounts securely to the TRX-4 Sport’s bumper and works in conjunction with the roof light bar for unsurpassed forward illumination.

259,-

279,-

KJØP
-7%
Hovedbilde Traxxas 8711 Speed Bit Master Set Hex Driver ... Hovedbilde Traxxas 8711 Speed Bit Master Set Hex Driver ...
Traxxas 8711 Speed Bit Master Set Hex Driver ...
Art.nr: TRX 8711
Copied
Speed Bit Master Set Hex Driver (7-pieces) Traxxas 7-Piece Metric Hex Bit Master Set 7-Piece Metric Hex Bit Master Set (#8711) Features: Precision-ground, hardened steel metric hex drivers Rubber overmolded handle for superior grip and comfort Precise fit magnetic insert holds the speed bit in the handle Standard 1/4 inch hex shank for use with power drill drivers Heavy-duty pouch holds tools securely Custom embroidered Traxxas logo Clearly marked with laser etched sizes Includes: Straight hex drivers: 1.5 mm, 2 mm, 2.5 mm, 3 mm Ball end drivers: 2 mm, 2.5 mm, 3 mm Maximum Durability 7-Piece Metric Hex Bit Master SetTraxxas premium tool kits are manufactured from exceptionally high quality materials to provide years of pro-level service. The thoughtfully engineered grip features an overmolded rubber design for more power and excellent comfort. The precision-ground, hardened-steel hex tips fit just right, to prevent wear, rounding, and screw damage. Designed specifically for Traxxas models, these speed bit sets come in a tough, compact pouch making them ideal to take along for service in the field. The included rubber overmolded handle holds the bits securely with a powerful magnet for fast bit changes. Headed to the track? Don’t worry, the included heavy-duty tool pouch keeps everything secure for traveling. Pick up any of the Premium Metric Speed Bit Sets and get wrenching with the only tools guaranteed to be Traxxas Tough™.  

949,-

999,-

KJØP
-5%

Kunder kjøpte også

Hovedbilde Traxxas 2640 Chrome Suspension Pin w/Clip 44mm (2)
Traxxas 2640 Chrome Suspension Pin w/Clip 44mm (2)
This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. Includes: two chrome  suspension pins and   three "E" type retaining clips. Requires:nothing parts are a direct replacement. Specs:3mm x 44mm  pins are notched for the 3MM "E" type retaining clips at each end.

29,-

39,-

KJØP
-26%
Hovedbilde RPM 80382 Rear Bearing Carriers Rustler/Stampede/Slash ... Hovedbilde RPM 80382 Rear Bearing Carriers Rustler/Stampede/Slash ...
RPM 80382 Rear Bearing Carriers Rustler/Stampede/Slash ...
RPM Rear Bearing Carriers for 2WD Slash, Nitro Slash, Stampede, Rustler & Bandit - Black Replaces stock Traxxas #3752 Quick Notes: Fits the Traxxas 2WD Slash, Rustler, Stampede & Bandit Replaces stock Traxxas #3752 5x11x4mm. bearings not included Not for use on 4×4 versions of the Rustler, Stampede or Slash Identical in strength and performance as our Front Bearing Carriers, these rear carriers will get you to the finish line every time! Our bearing carriers are molded from RPM’s bulletproof blend of nylons and are guaranteed not break! Molded in black or blue. Tech Notes: First generation vehicles (vehicles made prior to 2010) that come with 5x8mm bushings will need to purchase replacement 5x11x4mm bearings (not included). Later moels use a 5x11x4mm bearing as a stock size and can be directly transferred to RPM versions. 5x11x4mm bearings are not included with these kits (4 bearings are required for each kit).

129,-

139,-

KJØP
-7%
Hovedbilde Traxxas 9495A Pro Series Magnum 272R Transmission ... Hovedbilde Traxxas 9495A Pro Series Magnum 272R Transmission ...
Traxxas 9495A Pro Series Magnum 272R Transmission ...
Traxxas Pro Series Magnum 272R Transmission Upgrade Your 2WD Slash, Rustler, Stampede, or Bandit Developed specifically for the hard-hitting Drag Slash, the Pro Series Magnum 272R upgrades key features of the standard Magnum transmission for maximum durability and next-level performance. A new low-profile design, 3.2 mm motor plate and hardened steel top shaft are just the beginning. The Pro Series Magnum 272R represents a complete performance redesign and now it’s available for your standard or VXL 2WD Bandit, Rustler, Stampede, or Slash. QUICK FEATURES ON PRO SERIES MAGNUM 272R TRANSMISSION (#9495A) Redesigned transmission case Reinforced for added strength and rigidity Low-CG design for improved handling Ultra-rigid wheelie bar mount 3.2 mm Aluminum Motor Plate Increases structural rigidity Improves heat dissipation Compatible with fixed gear mesh system Hardened-steel top shaft Press-fit top gear for superior strength and durability Sealed differential Hardened-steel beveled gears Tunable with silicone differential oil Easy access differential Simple removal for tuning and maintenance   Pro Series Magnum 272R™ Transmission Upgrade Your Bandit, Rustler, Stampede, or Slash with the Toughest Transmission Available A New Generation of Performance Developed specifically for the hard-hitting Drag Slash, the Pro Series Magnum 272R upgrades key features of the standard Magnum transmission for maximum durability and next-level performance. A new low-profile design, 3.2 mm motor plate and hardened steel top shaft are just the beginning. The Pro Series Magnum 272R represents a complete performance redesign and now it’s available for your standard or VXL 2WD Bandit, Rustler, Stampede, or Slash. ­ QUICK FEATURES ON PRO SERIES MAGNUM 272R TRANSMISSION (#9495A) ­ Redesigned transmission case Reinforced for added strength and rigidity Low-CG design for improved handling Ultra-rigid wheelie bar mount 3.2 mm Aluminum Motor Plate Increases structural rigidity Improves heat dissipation Compatible with fixed gear mesh system Hardened-steel top shaft Press-fit top gear for superior strength and durability Sealed differential Hardened-steel beveled gears Tunable with silicone differential oil Easy access differential Simple removal for tuning and maintenance ­ ­   In-Depth Features     Precision Transmission Case The Pro Series Magnum 272R transmission is engineered for strength with its rugged, reinforced case. The case halves engage precisely to seal out dirt and debris, and create a rigid structure to support the motor, suspension arms, and optional wheelie bar. The thick T-6 aluminum motor plate resists flex and acts as a heatsink. All-Metal Internal Gears This race-ready transmission is built for massive torque with high-strength steel input, idler, and differential gears and large-diameter bearings. The input gear is keyed and press fit onto the top shaft for greater precision and strength than a pin-mounted gear.       Sealed Beveled-Gear Differential The heavy-duty steel-gear differential is X-ring and gasket-sealed and filled with grease for all-around performance. It's easy to tune the differential's locking action by adding different viscosity silicone oil to suit surface traction.   Removable Differential The Magnum 272R's easily removable differential makes maintenance and tuning easier than ever. Disconnect the driveshafts and open the hatch to release the differential in just minutes.         MODEL 9495A: Pro Series Magnum 272R™ Transmission   Accessory part for these models: Bandit® VXL Bandit® BIGFOOT® No. 1 Officially Licensed Replica Drag Slash Ford® F-150 Raptor Rustler® VXL Rustler® Slash 2WD Unassembled Kit Slash VXL Slash Stampede® VXL Stampede®

1.099,-

1.299,-

KJØP
-15%
Hovedbilde Traxxas 6593 Distribution Block Pro Scale Advanced ...
Traxxas 6593 Distribution Block Pro Scale Advanced ...
Distribution block, Pro Scale® Advanced Lighting Control System

189,-

199,-

KJØP
-5%
Hovedbilde Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz
Tamiya 86005 PS-5 Polycarbonate Spray Black 3 oz
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-5 Black).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Hovedbilde Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz
Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz
  This is Tamiya Color Spray Lacquer for Polycarbonate (PS-1 White).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable. Lakk maling sprayboks lakkboks ps.

109,-

119,-

KJØP
-8%
Hovedbilde Traxxas 3654 Hex Wheel Hub 2.5x10mm Fr ...
Traxxas 3654 Hex Wheel Hub 2.5x10mm Fr ...
        This is a Hex Wheel Hub Set for the Traxxas Rustler and                 Stampede. These parts have more offset than                   the stock hex wheel hub set. FEATURES: Gray plastic construction INCLUDES: Two wheel hubs           Two 2.5mmX10mm axle pins SPECS:    Hex size:          12mm           Width:             .32"         (8mm)

39,-

49,-

KJØP
-20%
Hovedbilde Traxxas 3637 Front Axles (2)
Traxxas 3637 Front Axles (2)
This is a Pair of Stock Replacement Front Axles for the Rustler and Stampede.              These are located in the front steering blocks. FEATURES: Steel construction           Natural color INCLUDES: Two front axles REQUIRES: Nothing.  These are direct replacement parts. SPECS:    Length: 32mm (1.26")           Diameter: 5mm COMMENTS: These will not work for the nitro versions.  For that axle, use TRX 2536,         

39,-

KJØP
Hovedbilde Traxxas 2532 Fiberglass Tie Bar Hovedbilde Traxxas 2532 Fiberglass Tie Bar
Traxxas 2532 Fiberglass Tie Bar
This is a Firberglass Tie Bar by Traxxas for the SRT FEATURES: Fiberglass Construction INCLUDES: One Tie Bar REQUIRES: Suspension Pins TRX 2640 SPECS:    Length:  98.4 mm  (3.875")           Width:    7.9 mm  (0.3125")           Thickness:  2.0 mm (0.082") COMMENTS: None

49,-

59,-

Ikke på lager
-17%
Hovedbilde RPM 80832 Rear Shock Tower for Slash 2WD, Stampede 2WD ...
RPM 80832 Rear Shock Tower for Slash 2WD, Stampede 2WD ...
RPM Rear Shock Tower for Slash 2WD, Stampede 2WD & Rustler 2WD Replaces stock Traxxas #3638 Quick Notes: Replaces stock Traxxas #3638 Fits Traxxas Slash 2WD, Stampede 2WD & Rustler 2WD Also fits the Bandit but see the “Tech Notes” below for important information Optional Front Shock Tower is also available RPM rear shock towers for the electric versions of the Slash, Stampede, Rustler & Bandit were designed with one thing in mind – rugged durability. Once again, we’ve exceeded our own expectations with this shock tower. While we’ve maintained all stock geometry on these shock towers, we’ve beefed them up in all the right places to eliminate annoying rear shock tower breakage. Our version of this shock tower uses an I-Beam construction that improves durability and rigidity as well. At the base of the shock tower, we’ve improved the screws’ head clearance of the bulkhead mounting screws to eliminate the bind normally associated with the stock rear shock tower. All these design elements combine to create the ultimate lightweight, bulletproof rear shock tower for the electric versions of the Slash, Rustler & Stampede. RPM rear shock towers for the Traxxas Slash, Electric Stampede, Electric Rustler & Bandit are molded in black and are backed by our famous breakage warranty. These towers are direct replacement parts for ease of installation. Tech Notes: These rear shock towers can be used on the Traxxas Bandit. However, there are no provisions for a rear wing built in.

99,-

Ikke på lager
Hovedbilde Traxxas 8088 LED Front Bumper Light Bar TRX-4 Sport
Traxxas 8088 LED Front Bumper Light Bar TRX-4 Sport
INFORMATION LED light bar, front bumper (fits #8124 front bumper, requires #8028 power supply) Blaze a path ahead with the bumper-mounted LED light bar. The light bar mounts securely to the TRX-4 Sport’s bumper and works in conjunction with the roof light bar for unsurpassed forward illumination.

259,-

279,-

KJØP
-7%
Hovedbilde Traxxas 3415 Tool Kit Hovedbilde Traxxas 3415 Tool Kit
Traxxas 3415 Tool Kit
  Traxxas 13-Piece Tool Kit with Carrying Case       The Perfect Companion The new Traxxas Tool Kit includes virtually every tool required to maintain Traxxas vehicles and stores them in a handy carrying case. A comfortable ratcheting handle allows the 11 included bits to telescope for those hard-to-reach screws. The kit includes nut drivers, hex drivers, standard and Phillips head screwdrivers and a wrench. Tool Kit Features: Comfortable ratcheting handle with clear directional markings Telescoping bits provide easy access to virtually any screw Five nut drivers: 4, 5, 5.5, 7 & 8mm Six hex drivers: 1.5, 2, 2.5, 3, 3.5 & 4mm Three Phillips head screwdrivers: Size 00, 0 & 1 Three flat-head screwdrivers: Size 2, 3 & 4 Open-ended wrench: 4 & 8mm Tough zippered carrying case

389,-

429,-

KJØP
-9%
Hovedbilde Traxxas 6507R 4-Channel TQi TSM Radio System ...
Traxxas 6507R 4-Channel TQi TSM Radio System ...
This is the Traxxas TQi 4-Channel 2.4GHz Transmitter with 5-Channel Receiver, TSM* (Traxxas Stability Management) and Traxxas Bluetooth Module. Servos Not Included. FEATURES Traxxas Stability Management (TSM): Superior tuning algorithms run on high-speed electronic components to control wheel spin and steering direction on loose dirt, concrete and even ice and snow. TSM can be fine tuned from 0-100%, or turned off by adjusting the multi- function knob on the TQi transmitter Can be equipped with the TQi Docking Base along with the iPhone, iPad or iPod touch* to create a graphical user interface for the vehicle Simple two-button programming interface Automatic model recognition recalls settings for up to 30 Traxxas Link enabled models Adjustable throttle and steering endpoints Five channel receiver with three telemetry ports Internal antenna High 13ms frame rate and near zero latency for responsive control Built-in failsafe returns throttle to last saved neutral position Multi-Function knob can be programmed to control Steering Sensitivity Throttle Sensitivity, Steering Percentage, Braking Percentage, or Throttle Trim INCLUDES Traxxas TQi 4-Channel 2.4GHz Transmitter Bluetooth Module, TRX 6511 5-Channel TSM Receiver, TRX 6533 REQUIREMENTS AA Batteries: Four for transmitter Servos of modeler's choice

2.095,-

2.295,-

KONTAKT
-9%
Hovedbilde Traxxas 2262 BEC HV for TRX-4
Traxxas 2262 BEC HV for TRX-4
High Voltage BEC kit for all TRX-4 chassis Traxxas new High-Torque servos represent a huge power upgrade for the TRX-4. When installing a high-torque servo from Traxxas, it is required that you use the High-Voltage BEC kit (#2262) and a steel servo horn (#8247X) is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits. Note: When used with Traxxas 2250 servo the maximum voltage is 2S LiPo When used with Traxxas 2255 servo the maximum voltage is 3S LiPo

429,-

459,-

KJØP
-7%
Hovedbilde Traxxas 6511 Link Bluetooth Wireless Module TQi
Traxxas 6511 Link Bluetooth Wireless Module TQi
This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

KJØP
-9%
Hovedbilde Traxxas 3975R Titan 550 Reverse Rotation 21T Motor
Traxxas 3975R Titan 550 Reverse Rotation 21T Motor
Motor, Titan 550, reverse rotation (21-turns/ 14 volts) (1) The Titan® 550 reverse-rotation motor is a 21-turn fan-cooled 550 size powerhouse capable of handling 14.4 volts. This powerful motor has a 30% longer armature than a standard 540 size motor for extreme monster torque. SPECS:    Length to end of armature: 78mm (3.07")           Diameter of can: 38mm (1.5")           Length of motor leads: 75mm (2.96")           Shaft diameter: (3.2mm) 0.125" COMMENTS: For the standard rotation motor, order TRX 3975.

289,-

299,-

KJØP
-3%
Hovedbilde Yeah Racing TRX4-023 Aluminum & Brass Drop Hitch ... Hovedbilde Yeah Racing TRX4-023 Aluminum & Brass Drop Hitch ...
Yeah Racing TRX4-023 Aluminum & Brass Drop Hitch ...
Aluminum & Brass Drop Hitch Receiver for Traxxas TRX-4   (Tilhengerfeste) Aluminum Drop Hitch receiver for Traxxas's TRX-4, use this to easily mount a trailer. Features three different offset holes for you to adjust the length which it sticks out the rear of your bumper. *Photos for reference only.   Feature: For: Traxxas TRX-4 Original Plastic Rear Bumper or YA-0549 Material: Aluminum & Brass Color: Silver   Include: Drop Hitch Receiver (1 pc) Set Screw (1 pc)

109,-

KJØP
Hovedbilde Traxxas 8247X Servo Horn Steering Metal TRX-4
Traxxas 8247X Servo Horn Steering Metal TRX-4
Servo horn, steering, metal/ 3x14 BCS (1) Spline: 25T

79,-

KJØP
Hovedbilde Traxxas 5413 Center Wing Mount Cross-Brace
Traxxas 5413 Center Wing Mount Cross-Brace
This is the replacement Center Wing Mount for the optional Traxxas                    Revo series wing mount set - TRX 5411  FEATURES: Composite nylon construction, black in color           Replaces a worn or damaged center wing mount INCLUDES: One Center Wing Mount           Two Beveled Nylon Wing Washers

59,-

KJØP
Hovedbilde Traxxas 6591 LED Kit Pro Scale Advanced Lighting ... Hovedbilde Traxxas 6591 LED Kit Pro Scale Advanced Lighting ...
Traxxas 6591 LED Kit Pro Scale Advanced Lighting ...
Traxxas 6591 - Pro Scale Lighting Kit Traxxas LED lighting sets the standard for adventure after dark with authentic shadow-chasing brightness on the trail. Now, Traxxas LED lighting is even more realistic with the new Pro Scale Advanced Lighting Control System. The Pro Scale system puts you in command of high- and low-beam headlights; turn signals; brake lights; reverse lights; and even hazard signals for the ultimate in scale off-roading. Kit Contents: Pro Scale Lighting Power Module Power module chassis mount Pro Scale Lighting Distribution Block Motor sense wire harness Breakaway cable (part of the distribution block) MAXX® Link cable (Data Link) (TQi Radio System only) Receiver communication cable 2.6x8mm button-head cap screw (2) 2.5x10mm countersunk cap screw (1) 2.5x12mm cap screw (1) 2.5x18mm cap screw (1) Zip ties (10) Silicone grease Tools required: 2.0mm hex wrench (part #3415, sold separately) Wire cutters (to trim zip ties) Small needle nose pliers *Requires Traxxas Link App (available in the Apple App Store™ or on Google Play™) and TQi transmitter with the Traxxas Link Wireless Module (part #6511, sold separately).

649,-

699,-

KJØP
-7%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png