Traxxas

Traxxas 3977R Telemetry-Ready Gear Cover (TQi) 3x6mm CS (3)

Art.nr: TRX 3977R

49,-

Traxxas

Traxxas

På lager: 2

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Denne erstatter TRX 3977X

Telemetry-Ready Gear Cover
This gear cover includes a telemetry sensor port (sensor sold separately) and fits E-Maxx Brushless Edition. The gear cover is required to enable RPM and speed telemetry data.

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Dynomaxx 9694 Charge Lead EC5 with 4mm Banana ...

Dynomaxx 9694 Charge Lead EC5 with 4mm Banana ...

DynoMAX B9694 - EC5 Charging Lead for Chargers with 4mm Banana Outputs This is a charging lead for batteries with a EC5 connector. It fits chargers that are equipped with 4mm banana connectors. Specs: Battery Connector: EC5 Charger Connector: 4mm Banana Bullets Wires: 14AWG Length: 500mm

85,-

Hovedbilde Radient 010065 EC5 PAIRS (10PCS)

Radient 010065 EC5 PAIRS (10PCS)

EC5 PAIRS (10PCS)

419,-

439,-

-5%

Hovedbilde Traxxas 5334R Axle Carrriers Left & Right/Bearing ...

Traxxas 5334R Axle Carrriers Left & Right/Bearing ...

These are the Optional Axle Carriers L & R for use on the Traxxas Revo series, E-Maxx, T-Maxx and Summit FEATURES: Nylon Construction Black in Color Allows for Oversized Bearing use INCLUDES: One Left Axle Carrier One Right Axle Carrier Four Dust Boot Retainers Two Bearing Spacers REQUIRES: Installation

109,-

119,-

-8%

Hovedbilde Traxxas 5643 17T Pinion For 5mm Shaft

Traxxas 5643 17T Pinion For 5mm Shaft

This is a Traxxas 17 Tooth Pinion Gear for a 5mm Motor Shaft. FEATURES: Silver in color Metal construction INCLUDES: (1) 17 Tooth Pinion Gear (1) One 4mmx3.5mm set screw REQUIRES: Installation on motor shaft SPECS: Outer Diameter: 15.5mm (0.61") Inner Diameter: 5mm (0.20") Gear, 17-T pinion (0.8 metric pitch, compatible with 32-pitch) (fits 5mm shaft)/ set screw 17-tooth pinion gear (32-pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

69,-

89,-

-22%

Hovedbilde Traxxas 5352T Heavy Duty Rebuild Kit Revo/Maxx Trucks

Traxxas 5352T Heavy Duty Rebuild Kit Revo/Maxx Trucks

Traxxas 5352T - Rebuild kit (heavy duty), slipper clutch (steel disc/ aluminum friction pads (3)/ spring (1)/ 2x9.8mm pin/ 5x8mm MW/ 5.0mm NL (1)/ 4.0mm NL (1))

119,-

129,-

-8%

Hovedbilde Traxxas 5351 Slipper Pressure Plate & Hub Alloy

Traxxas 5351 Slipper Pressure Plate & Hub Alloy

This is a Replacement Slipper Pressure Plate and Slipper Hub for the Revo. These are part of the slipper assembly. FEATURES: Aluminum construction INCLUDES: One slipper pressure plate One slipper hub REQUIRES: Installation onto vehicle.

99,-

Hovedbilde Traxxas 5451X Driveshaft assembly (1), left or right

Traxxas 5451X Driveshaft assembly (1), left or right

Traxxas 5451X Driveshaft assembly (1), left or right (fully assembled, ready to install)/ 4x15mm screw pin (1)

149,-

169,-

-12%

Hovedbilde Traxxas 3236 Cap Head Screws 2.5x12mm (4)

Traxxas 3236 Cap Head Screws 2.5x12mm (4)

Replacement CAP HEAD SCREWS are designed to be used with Traxxas products requiring this type/size screw. They will also work with other manufacturers products requiring this type/size screw. PACKAGE INCLUDES: 4-Cap-Head Machine Screws (steel) SPECS: Size: 2.5x12mm COMMENTS: HEADERCARD STATES (6) PER PACKAGE ***** PACKAGE CONTAINS ONLY (4) SCREWS

29,-

Hovedbilde Traxxas 3979 Housings Diff Left & Right E-Maxx

Traxxas 3979 Housings Diff Left & Right E-Maxx

These are the Left and Right Differential Housings for the Traxxas E-Maxx. FEATURES Constructed of plastic Replaces damaged or broken diff housings INCLUDES Left and Right Differential Housings and Pinion Collar REQUIREMENTS Installing all internal diff components

49,-

Hovedbilde Traxxas 5353A Wheel Nuts Splined 17mm Green (4)

Traxxas 5353A Wheel Nuts Splined 17mm Green (4)

These are the optional 17mm Splined Wheel Nuts for the T-Maxx 3.3 4WD Nitro Monster Truck RTR FEATURES: Aluminum construction, green anodized in color INCLUDES: Four aluminum splined wheel nuts REQUIRES: Installation on the vehicle

129,-

149,-

-13%

Hovedbilde Traxxas 5153 Drive Cups Inner Revo/T-Maxx (2)

Traxxas 5153 Drive Cups Inner Revo/T-Maxx (2)

These are Inner Drive Cups for the Traxxas Revo/T-Maxx. FEATURES: Steel construction INCLUDES: Two steel constant velocity driveshafts Two M4/15 screw pins REQUIRES: Installation onto vehicle. SPECS: Length: 18mm (.70") Diameter: 13mm (.51")

99,-

Hovedbilde Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...

Traxxas 2553 Screws Countersunk Machine 3x15mm Revo ...

This is a package of six 3x15mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x15mm countersunk screw is required INCLUDES: Six 3x15mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS: Length: 15mm Diameter: 3mm

35,-

Hovedbilde Traxxas 2552 Screws Countersunk Machine 3x12mm Revo ...

Traxxas 2552 Screws Countersunk Machine 3x12mm Revo ...

This is a package of six 3x12mm Traxxas Countersunk Hex Head Screws. FEATURES: Steel construction, Black in color Used on the Traxxas Revo monster truck, can also be used in any application where a 3x12mm countersunk screw is required INCLUDES: Six 3x12mm Traxxas Countersunk Hex Screws REQUIRES: 2mm hex head wrench. SPECS: Length: 12mm Diameter: 3mm

35,-

Hovedbilde Traxxas 4938 Skid Plate Rear Plastic T-Maxx

Traxxas 4938 Skid Plate Rear Plastic T-Maxx

This is the Replacement Rear Skidplate for the Traxxas T-Maxx and E-Maxx 4WD Radio Control Monster Truck. This rear skidplate bolts underneath the chassis and helps to prevent the chassis from getting scratched. FEATURES: Replaces damaged rear skidplates. Constructed of black plastic. INCLUDES: One rear skidplate. REQUIRES: Bolting to bottom of chassis using three 3x10mm countersunk machine screws (not included).

75,-

Hovedbilde Traxxas 5379X Differential Ring Gear/Pinion Gear

Traxxas 5379X Differential Ring Gear/Pinion Gear

This is the Differential Ring Gear and Pinion for use with the Traxxas Revo 3.3 and many other Traxxas Cars. FEATURES: Direct replacement part INCLUDES: One differential ring gear One pinion gear REQUIRES: Traxxas Revo 3.3 2.5x8mm cap head screws TRX 3965

219,-

Hovedbilde Traxxas 3934 Body Clips (12)

Traxxas 3934 Body Clips (12)

Heavy-duty body clips hold tightly for the intense, high-flying action of our toughest 1/10 scale vehicles. Sold as a pack of 12. FEATURES: Steel construction Natural polished color INCLUDES: Twelve Body Clips SPECS: Length: 26mm

39,-

Hovedbilde Traxxas 3978 Carrier Diff

Traxxas 3978 Carrier Diff

This is the Carrier Differential for the Traxxas Revo and E-Maxx. FEATURES: Replaces worn diff carriers gaskets and spacers INCLUDES: Diff Carrier and Gaskets, TRX 5381. Steel Spider Gear Braces (not used with Revo) Instruction sheet REQUIRES: Disassembly of differential, installing new parts and refilling with modeler's choice of diff lube 10K TRX 5135 50K TRX 5137 30K TRX 5136 stock weight Complete set TRX 5136X

49,-

Hovedbilde Traxxas 5161 Suspension Screw Pin Set

Traxxas 5161 Suspension Screw Pin Set

This is the Suspension Screw Pin Set for the Traxxas T-Maxx 3.3 and E-Maxx. FEATURES: Steel construction Silver in color INCLUDES: Two 59mm screw pins. Four 73mm screw pins. Two 65mm screw pins

109,-

Hovedbilde Traxxas 5119 Ball Bearings 10x15x4mm Revo (2)

Traxxas 5119 Ball Bearings 10x15x4mm Revo (2)

Disse lagerene er samme størrelse som Tamiya 1510 This is a set of 10x15x4mm Ball Bearings for use on the Traxxas Revo. FEATURES: Steel Construction Shielded with blue rubber seals INCLUDES: Two Ball Bearings REQUIRES: Assembly to vehicle SPECS: Inner Diameter: 10mm Outer Diameter: 15mm Side Thickness: 4mm COMMENTS: These bearings are used to support the Primary Clutch (one needed). Tamiya 630 3X6X2.5mm Tamiya 730 3X7X3mm Tamiya 840 4X8X3mm Tamiya 850 5X8X2.5mm Tamiya 1050 5X10X4mm Tamiya 1060 6X10X3mm Tamiya 1150 5X11X4mm Tamiya 1260 6X12X4mm Tamiya 1280 8X12X3.5mm Tamiya 1480 8x14x4mm ??? Tamiya 1510 10X15X4mm Tamiya 1680 8X16X5mm

89,-

99,-

-10%

Hovedbilde Traxxas 5118 Ball Bearings 8x16x5mm Revo (2)

Traxxas 5118 Ball Bearings 8x16x5mm Revo (2)

These are the replacement Differential Bearings for the Traxxas Nitro Revo Monster Truck. FEATURES: Stainless Construction Blue Rubber Sealed INCLUDES: Two 8mm x 16mm Rubber Sealed Bearings REQUIRES: Assembly onto Vehicle SPECS: Inner Diameter: 8mm (0.31") Outer Diameter: 16mm (0.62") Thickness: 5mm (0.19")

79,-

Hovedbilde Traxxas 5117 Ball Bearings 6x12x4mm Revo (2)

Traxxas 5117 Ball Bearings 6x12x4mm Revo (2)

Disse lagerene er samme størrelse som Tamiya 1260 This is a 6X12x4mm Ball Bearing Set from Traxxas. FEATURES: Steel construction Blue rubber dirt shields INCLUDES: (2) ball bearings, Part #5117 SPECS: Inside diameter: 6mm Outside diameter: 12mm Width: 4mm COMMENTS: This bearing set is used in the transmission and differentials of the Revo.

55,-

Hovedbilde Traxxas 5134 Caster Spacers w/Shims (4)

Traxxas 5134 Caster Spacers w/Shims (4)

This is a Package of Replacement Caster Spacers for the Traxxas. These spacers adjust caster of the wheels. FEATURES: Black nylon construction. INCLUDES: Four caster spacers Four caster shims REQUIRES: Nothing. These are direct replacement parts. SPECS: Thickness: 2mm (0.08")

39,-

Hovedbilde Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...

Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...

This is the replacement Pivot Ball and Dust Cap Boot Set for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles. FEATURES: Nylon and Rubber Construction Blue and Black in Color INCLUDES: Four Blue Rubber Pivot Ball Boots Four Black Dust Boot Retainer Four Blue Notched Dust Boot Retainer Four Blue Rubber Boot Plugs Four nylon Pivot Ball Retainers Instruction sheet REQUIRES: Two packages needed to complete truck

89,-

99,-

-10%

Hovedbilde Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz

Tamiya 86001 PS-1 Polycarbonate Spray White 3 oz

This is Tamiya Color Spray Lacquer for Polycarbonate (PS-1 White). For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies used in R/C car modeling. An appropriate amount of paint for finishing one R/C model. This paint is impervious to oil and fuels, so they can be safely used on gas-powered R/C bodies. The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS: Net Volume: 100ml COMMENTS: Never use this paint on plastic models. Highly flammable. Lakk maling sprayboks lakkboks ps.

109,-

119,-

-8%

Hovedbilde Traxxas 5687 LED Lights Center Harness Summit

Traxxas 5687 LED Lights Center Harness Summit

This is the Center Harness and Wire Clip for the LED Lights used on the Traxxas Summit Truck 1/10 FEATURES: JST Connectors INCLUDES: One Center Harness One Wire Clip Three Zip Ties REQUIRES: Installation on vehicle

69,-

79,-

-13%