Hopp til innhold
Hjem / Biler / El-biler / Tamiya El-biler / Terrengbiler 4WD / Tamiya 58372 Ford F-350 High-Lift Kit
-23%

Tamiya 58372 Ford F-350 High-Lift Kit

Art.nr: 58372

5.395,-

6.995,-

- 23%
Tamiya

Tamiya
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the 1/10 scale electric powered, radio controlled,
                Tamiya Ford F350 Hi-Lift 4x4 Off-Road Truck Kit.

FEATURES: Chassis: Ladder type, steel channel and resin cross members
          Drive: Four wheel shaft
          Motor: 540 size
          Bushings and Ball Bearings
          Shocks: Four, friction type aluminum bodies
          Gearboxes: Closed
          Differentials: Resin case with planetary gear die-cast gears
          Transmission: 3-speed with slipper clutch
            with slipper clutch to protect gears during tough off-road running
          Body: Rigid plastic molded White in color, window set, plated plastic
            bumpers, roll bar and body trim, plastic light lenses
          Tires: Lug pattern 3.7" (94mm) diameter,  1.2" (32mm) wide
          Wheels: 6-spoke brushed chrome 1.9" (48mm) diameter, .90" (23mm)
            wide
          Bumper: Front, Brushed Chrome finish
          Suspension: Rigid leaf type
          Camber Tie Rods: Non-adjustable
          Caster: Adjustable, caster/toe-in refers to the angle of the front
            suspension when viewed from the side of the car in relation to the
            chassis
          Steering: Bell-crank type with servo saver, 4-wheel steering can be
            added by installing rear axle tension rod

INCLUDES: Tamiya Ford F350 Hi-Lift truck with friction shocks, 540 motor,
            molded White body, window section, body trim, decals, plastic light
            lenses, tires, wheels, 16 tooth pinion gear, 54 tooth spur gear
            molded plastic surfboard with different marrking options,
            instructions
                                                                              _
REQUIRES: Radio: 4-Channel with 2 Servos
          Radio Batteries: (8) AA size
          Speed Control: Electronic with reverse
          Battery: 6-cell stick pack with standard Tamiya connector
          Charger: AC/DC timed or peak for 6-cell battery
          Misc. Items: Building and track equipment

SPECS:      VEHICLE-
          Length:       20" (508mm)
          Width:       8.5" (216mm)
          Height:     10.6" (270mm)
          Weight:   6.8 lbs (3.1kg)
          Gear Ratio: Low Gear 1:64.39, 2nd Gear 1:35.20, Top Gear 1:21.14
          Tires: 3.7" (94mm) diameter,  1.2" (32mm) wide
            BODY-
          Length:   18.75" (476mm)
          Width:     7.25" (184mm)
          Height:     5.1" (130mm)

Produsent

Tamiya

Tamiya

Mr. Yoshio Tamiya founded a saw mill/lumber factory in Shizuoka-City. Tamiya ventured into the modeling business in 1948, with a scale wooden ship model kit. Since then, Tamiya has been striving to offer merchandise that can truly be called "First in Quality Around the World."


Now Tamiya is offering more than 3000 different products, both in the fields of precision static models and high performance radio control vehicles. These products are not only sold in Japan but also exported in vast quantities to the United States, Europe, South East Asia, and to many other parts of the world. The standard of excellence achieved by Tamiya is regarded as among the very finest in the world of model hobbies.

Relaterte produkter

 

Hovedbilde Tamiya 58415 Toyota Tundra High-Lift Kit Hovedbilde Tamiya 58415 Toyota Tundra High-Lift Kit
Tamiya 58415 Toyota Tundra High-Lift Kit
Art.nr: 58415
Copied
RC TOYOTA TUNDRA HIGHLIFT Customizable Scale Realism The Tundra is a full-size pick-up truck made by Toyota for the North American market. In 2007, the Tundra underwent a model change, and this is a 1/10 R/C assembly kit of the double cab version of this second generation Tundra. The model features a ladder frame chassis just like the actual truck, and is also equipped with a 3-speed transmission and shaft-driven 4WD system. Many metal parts such as the ladder frame, leaf springs, and friction dampers provide a unique assembly experience while the injection-molded body shell and large diameter tires accurately reproduce the high-lift's imposing appearance. Futhermore, parts such as a roll bar, grille guard, and roof carrier with 2 snowboards are included to let you customize your ride. Add separately available LED lights for an even higher level of realism.   Length: 500mm, Width: 216mm, Height: 238mm, Weight: Approx. 3.1kg. Motor: Type RS540 Drivetrain: Shaft-driven 4WD Diff. Gear: Front/Rear 2-bevel Diff. Suspension: Fron/Rear Leaf Rigid Dampers: Front/Rear Friction Dampers Gear Ratios: 1：64.39 (Low), 1：35.20 (2nd), 1：21.14 (Top) Speed Controller: ESC SPECIFICATIONS Adjustable Gear Ratio 3-speed transmission Bearings Metal bearings and bronze bushings Body Material ABS Plastic Body Stickers Included Chassis Material Aluminum and ABS plastic Construction Type Assembly Kit Differential Type Gear Drive Type 4WD Electronic Speed Control (esc) Sold Separately Led Lights Not Included, but sold separately Motor 540-brushed type Scale 1/10 Shock Damper Friction type Required To Complete: 4-Channel Radio (Tamiya Attack) 2 servos ESC 7.2volt battery with compatible charger Tamiya TS & Acrylic-Lacquer Bottle Paints To paint the body to match to photos on the box use: TS-75 Champagne Gold   85075        X-27 Clear Red    81527 TS-29 Semi Gloss Black   85029          X-26 Clear Orange 81526 X-18 Semi Gloss Black    81018  

5.395,-

6.595,-

KJØP
-18%
Hovedbilde Tamiya 58397 Toyota Hilux High-Lift Kit Hovedbilde Tamiya 58397 Toyota Hilux High-Lift Kit
Tamiya 58397 Toyota Hilux High-Lift Kit
Art.nr: 58397
Copied
          This is the 1/10 scale electric powered, radio controlled,           Tamiya Toyota Hilux 4x4 Off-Road Truck Kit.            For modelers 10 years of age and older. FEATURES: Chassis: Ladder type, steel channel and resin cross members           Drive: Four wheel shaft           Motor: 540 size           Bushings and Ball Bearings           Shocks: Four, friction type aluminum bodies, tension can be adjusted             with separately available friction grease           Gearboxes: Closed           Differentials: Resin case with planetary die-cast gears           Transmission: 3-speed with slipper clutch             with slipper clutch to protect gears during tough off-road running           Body: Rigid plastic molded White in color, window set, plated plastic             bumpers, roll bar and body trim, plastic light lenses           Tires: Lug pattern 3.7" (94mm) diameter,  1.2" (32mm) wide           Wheels: 5-spoke Grayish Chrome 1.9" (48mm) diameter, 0.90" (23mm)             wide           Bumper: Front, brushed chrome finish           Suspension: Rigid leaf type, leaf spring numbers can be altered to             for different tension adjustment           Camber Tie Rods: Non-adjustable           Caster: Adjustable, caster/toe-in refers to the angle of the front             suspension when viewed from the side of the car in relation to the             chassis           Steering: Bell-crank type with servo saver, 4-wheel steering can be             added by installing rear axle tension rod INCLUDES: Tamiya Hilux truck with friction shocks, 540 motor,             molded White body, window section, body trim, decals, plastic light             lenses, tires, wheels, 16 tooth pinion gear, 54 tooth spur gear             instructions                                                                               _ REQUIRES: Radio: 4-Channel with 2 Servos           Radio Batteries: (8) AA size           Speed Control: Electronic with reverse           Battery: 6-cell stick pack with standard Tamiya connector           Charger: AC/DC Timed or Peak for 6-cell battery           Misc. Items: Building and track equipment SPECS:      VEHICLE-           Length:     19.4" (492mm)           Width:       8.5" (216mm)           Height:      8.7" (220mm)           Weight:   6.8lbs (3.1kg)           Gear Ratio: Low Gear 1:64.39, 2nd Gear 1:35.20, Top Gear 1:21.14           Tires: 3.7" (94mm) diameter,  1.2" (32mm) wide             BODY-           Length:   17.7" (449mm)           Width:     6.5" (165mm)           Height:    5.1" (130mm)

5.295,-

6.795,-

Ikke på lager
-22%

Kunder kjøpte også

Hovedbilde Ugears 70135 Research Vessel Hovedbilde Ugears 70135 Research Vessel
Ugears 70135 Research Vessel
Ugears Research Vessel Time to weigh anchor and go full speed ahead towards new discoveries with Ugears nautical model, the Research Vessel. Inspired by classic scientific documentaries and biographies of outstanding marine explorers, the Research Vessel is the incarnate might and beauty of large modern icebreakers and survey boats. Your new boat has all you need to implement proper research: a bathyscaphe for deep-sea exploration, a small motor-boat and a life boat, drop ramp, opening hold hatch, and other fun and interesting elements you find in real-life vessels. The model is equipped with a swing jib crane to manage cargo and hoist out the bathyscaphe. Use the crane to pull the bathyscaphe out of the depths and secure it on a special extension platform. All details of the Research Vessel are made of high-grade wood that need no glue or additional instruments to assemble. The “skeleton” design of the Vessel’s body allows you to look into the hold and engine room and see what makes her move. The energy driving the model is produced by a rubber-band motor and managed by a pendulum. A clever gear arrangement in this block imitates the sound of a diesel engine and provides a smooth and steady pace of the Vessel. The model has three movement modes – forward, turn, and automatic manoeuvring. The modes are controlled with a lever you can switch manually. Research Vessel mechanical model kit   Model size: 15.2*4.3*9.8 in (38.5 *11*25 cm) Package size: 14.9*6.7*1.7 in (37.8*17*4.2 cm) Number of components: 575 Estimated time of assembly: 10 hours Level: Advanced

759,-

KJØP
Hovedbilde Yeah Racing YB6011B/S10 RC PTFE Bearing (5x8x2.5mm) ... Hovedbilde Yeah Racing YB6011B/S10 RC PTFE Bearing (5x8x2.5mm) ...
Yeah Racing YB6011B/S10 RC PTFE Bearing (5x8x2.5mm) ...
Disse lagerene er samme størrelse som Tamiya 850 Yeah Racing RC PTFE Bearing (5x8x2.5mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6011BS/10) RC Telfon Bearing (5x8x2.5mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

79,-

89,-

KJØP
-11%
Hovedbilde Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ... Hovedbilde Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ...
Yeah Racing YB6014B/S10 RC PTFE Bearing (5x11x4mm) ...
Disse lagerene er samme størrelse som Tamiya 1150 Yeah Racing RC PTFE Bearing (5x11x4mm) 10pcs Features: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision   Specifications: Yeah Racing (#YB6014BS/10) RC Telfon Bearing (5x11x4mm) Material: Metal   Includes: Bearing (10Pcs)   Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster.

89,-

99,-

KJØP
-10%
Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ... Hovedbilde Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing YB6013B/S10 RC PTFE Bearing (5x10x4mm) ...
Yeah Racing RC PTFE Bearing (5x10x4mm) 10pcs Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision Specification: Yeah Racing (#YB6013BS/10) RC Telfon Bearing (5x10x4mm) Material: Metal Include: Bearing (10Pcs) * Photo for Reference Only Tips on Cleaning & Lubricating Ball Bearings (RC Bearing Tips) Tips for Handling New Ball Bearing: Most competition RC racers will clean the grease on the new ball bearings and apply ball bearing oil on them. (i.e. Yeah Racing High Speed Bearing Oil / Lube #YA-0215). As re-oiling the ball bearing allows the RC cars to run smoother and makes the bearings more durable. Tips for Maintaining Old Ball Bearing: By removing the old bearing oil, it will reduce the friction in the bearing, thus making RC car run faster. Below are some tips in cleaning the ball bearings. Preparation:   High Speed Bearing Oil / Lube (#YA-0215) Universal Cleaning Case (#YA-0223) Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021) Step 1: Cleaning Soak the ball bearings with volatile degreaser (i.e. brake cleaner) / apply motor spray on them. Step 2: Shake & Soak Shake the bearing case vigorously to remove dirt. It will loosen and remove the dirt trapped inside the bearings. Soak the bearings for another 15-30 minutes. Repeat the process until the oil / liquid is clean. Step 3: Drying Step 4: Re-greasing Dry the ball bearing with hot air gun / hair blower to prevent rusting of the bearing. Apply light oil on the bearings, give it about 20 minutes to penetrate the seals and then clean the outsides up. Finish: Bearing Testing Tool: This tool can test the smoothness of the bearing. Put the bearing on the tool and turn the bearing to check its smoothness. If the bearing does not turn smoothly, then it¡¦s time to get a new one. Aluminum Bearing Inner Size Measurer For 2-14mm (#YT-0021)  

79,-

89,-

KJØP
-11%
Hovedbilde Tamiya 53958 Full Ball Bearing Set Ford F-350 ...
Tamiya 53958 Full Ball Bearing Set Ford F-350 ...
This is the Full Ball Bearing Set for the Tamiya Ford F-350 High-Lift. FEATURES Constructed of steel and dirt resistant for long life INCLUDES Thirty five 5x11x4mm, four 6x12x4mm and two 5x8x2mm bearings REQUIREMENTS Installing in kit following instructions in manual

649,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png