Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Pinion(drev til motor) / .6 Mod 3.17/3.2mm Shaft / Robinson Racing 1123 Pinion Gear Metric 23T

Robinson Racing 1123 Pinion Gear Metric 23T

Art.nr: 1123

89,-

Robinson Racing

Robinson Racing
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

These are .6 mod pinion gears. These are used on cars such as the Tamiya
touring cars(this works on the TA01 and the TA02, but NOT on the TA03). They
also work on some other Tamiya cars, and on the Kyosho Ultima Pro, and the
Ultima Pro XL.
These gears are available in sizes from 12 to 24 teeth.
Includes a pinion set screw.

 

 

SPECIFICATIONS

Number of Teeth: 23
Pitch: .6 Mod
Bore: 1/8" 0.125" (3.2mm)

Produsent

Robinson Racing

Robinson Racing

Kunder kjøpte også

Hovedbilde Tamiya 85014 Spray Lacquer TS-14 Black 3 oz
Tamiya 85014 Spray Lacquer TS-14 Black 3 oz
 This is a 100ml Spray Can of Synthetic Lacquer Paint from Tamiya. FEATURES: Cures in a short period of time.           Extremely useful for painting large surfaces.           100ml is enough to fully cover two or three 1/24 scale sized car             bodies.           Tamiya spray paints are not affected by acrylic or enamel paints.             Therefore, following the painting of the entire assembly, details             can be added or picked out using enamel and/or acrylic paints.  By             combining three different paints, the decoration of plastic             models will become simpler and more effective.           Available in 52 colors. INCLUDES: One 100ml Spray Can of Synthetic Lacquer Black Paint. REQUIRES: Eye, Lung and Skin Protection. COMMENTS: Highly Flammable, Pressurized Container.            Keep out of the reach of children.

109,-

KJØP
Hovedbilde Tamiya 19805551 Drive Shaft For 58067
Tamiya 19805551 Drive Shaft For 58067
Drive Shaft For 58067 *2   This is a set of replacement parts which will fit the Tamiya Manta Ray,  Bear Hawk, Top-Force, Stadium Blitzer, and Terra Conquerer. Includes: (2) 3" long dogbones (also called swingshafts) Requires: Nothing else is required.

139,-

KJØP
Hovedbilde Tamiya 53569 Clamp Type Aluminum Wheel Hub 6mm
Tamiya 53569 Clamp Type Aluminum Wheel Hub 6mm
These are Clamp Type 6mm Aluminum Wheel Hubs by Tamiya.  Fits TA04, TA03, TL-01 and F201 chassis cars.     FEATURES Plain silver aluminum construction (all parts).  High round cap head screws with a hexagon socket drive insert.  These wheel hubs are fastened with cap screws and prevent the 2x10mm  shaft from falling out as well as realize precise wheel attachment.  Illustrated reference guide.   INCLUDES (4) Wheel Hubs  (5) Shafts  (5) Cap Screws  (1) 1.5mm Hex Wrench   SPECIFICATIONS Wheel Hubs - Cap Screws -  Thickness: 6mm Diameter: 1.6mm  Inner Diameter: 2.5mm Length: 4mm  Outer Diameter: 12mm  Shaft Size -  Length: 10mm  Diameter: 2mm

269,-

KJØP
Hovedbilde Hudy 106210 Graphite Grease Hovedbilde Hudy 106210 Graphite Grease
Hudy 106210 Graphite Grease
  HUDY Graphite Grease is a high-performance, advanced-technology semi-fluid lubricant which incorporate both extreme pressure additives and finely dispersed graphite for load carrying. It is intended primarily for the lubrication of rotating parts and loaded gears. In addition to providing outstanding load carrying, it is formulated to have excellent adhesion and resistance to "fling-off" under extreme conditions. The grease reduces wear and increase the parts life.     The HUDY Graphite Grease comes in a handy small tube and is easy to apply. • Special formulation provides outstanding load-carrying and anti-wear properties • Superior protection against wear, resulting in reduced gear replacement costs and increased part life • Efficient operation, good low temperature start-up and reduced energy consumption • Very good protection against rust and corrosion • Very good adhesion reduces fling-off and consumption Applications: • Drive shaft couplings, pins, and blades • Diff gears Proper care and precautions must be used in the storage and use of HUDY Graphite Grease. Do not get near eyes or ingest, and keep out of the reach of children.

99,-

Ikke på lager
Hovedbilde Tamiya 54477 TT-02 Gear Box JT. Univ. Shaft
Tamiya 54477 TT-02 Gear Box JT. Univ. Shaft
These are steel gearbox joint shafts which replace the kit standard plastic parts for increased performance and durability. They must be used in conjunction with item 53792 RC Universal Shaft Assembly set. Compatible with the TT-02 chassis when item 53792 RC Universal Shaft Assembly is used. Gearbox joints x2

119,-

KJØP
Hovedbilde Tamiya 47326 1/10 TT-02R Chassis Kit Hovedbilde Tamiya 47326 1/10 TT-02R Chassis Kit
Tamiya 47326 1/10 TT-02R Chassis Kit
This is the 1/10 scale, electric powered, radio controlled, Tamiya TT02R On-Road Chassis Kit. The following Hop Up Option Parts are included; 53159 4mm Aluminum Flange Lock Nut (Blue) 54247 3x18mm Aluminum Turnbuckle Shaft (Blue) x2 54501 TT-02 Aluminum Propeller Shaft 53642 5mm Aluminum Ball Connector (Blue) 54500 TT-02 High-Speed Gear Set (68T) 54502 TT-02 Aluminum Propeller Joint Take the TT-02 Racing!! This variant of the efficient 4WD TT-02 chassis includes a range of option parts, allowing you to compete at the front of the race! Aluminum rear uprights give 3-degree toe-in for more stable cornering, while an aluminum motor mount makes for greater rigidity and enhanced heat dissipation. A highly reliable drivetrain employs full ball bearings, aluminum propeller shaft and center cups, plus metal drive shafts and joint cups. Suspension is fitted with CVA oil dampers and black coil springs; they provide superior cushioning and improved traction. The kit also includes a TT-02 high speed gear set (68T). FEATURES Chassis: ABS resin bathtub type minimizes contact with the road Drive: Four wheel, aluminum shaft driven Motor Mount: Aluminum Differential: Gear type Wheels: Ten spoke, black in color Tires: Slick rubber with foam inserts Ball Bearings: Shielded Suspension: Fully independent double wishbone Shocks: CVA oil-filled Camber: Non-adjustable, camber refers to the angle of the tops of the tires from vertical when viewed from front or behind vehicle Caster: Adjustable, caster/toe-in refers to the angle of the front suspension when viewed from the side of the car in relation to the chassis, newly-designed aluminum uprights provide 3 degrees of toe-in for better stability when cornering Steering: Bellcrank type Bumper: Front, urethane INCLUDES Tamiya TT0R Chassis, with Tires, Wheels, Shocks, Decals and Instructions REQUIREMENTS Radio: 2-channel with high speed steering servo Motor: Tamiya Super Stock brushed motor recommended Electronic Speed Control: To match selected motor Battery: 7.2V NiMH Battery Charger: To match selected battery Body: 1/10 scale on-road Paint, building and track equipment SPECIFICATIONS Length: 14.8" (376mm) Width: 7.2" (182mm) Wheelbase: 10.1" (257mm)

1.995,-

2.395,-

KJØP
-17%
Hovedbilde Tamiya 51629 3x10mm Steel Countersunk Hex Head Screws ...
Tamiya 51629 3x10mm Steel Countersunk Hex Head Screws ...
These are spare hex head screws used in Tamiya R/C cars. Timely replacement of screws is a key to keeping your R/C model in top working condition, as worn screws can slip out and cause parts to come loose.  • Contains 10 screws.  • Screws are made from durable steel.  • Hex heads facilitate a smooth tightening process. 

49,-

KJØP
Hovedbilde Tamiya 51628 3x10mm Steel Hex Head Screws (10stk.)
Tamiya 51628 3x10mm Steel Hex Head Screws (10stk.)
These are spare hex head screws used in Tamiya R/C cars. Timely replacement of screws is a key to keeping your R/C model in top working condition, as worn screws can slip out and cause parts to come loose.  • Contains 10 screws.  • Screws are made from durable steel.  • Hex heads facilitate a smooth tightening process. 

49,-

KJØP
Hovedbilde Tamiya 54611 RC Motor 10.5T Brushless TBLM-02S
Tamiya 54611 RC Motor 10.5T Brushless TBLM-02S
This is the Tamiya TBLM-02S 10.5T Sensored Brushless Motor. FEATURES Sensored design provides smooth operation at both low and high speeds Designed for use with Tamiya's sensored ESCs such as the TBLE series (cooling fan recommended for longer ESC life) Ideal for buggy applications with an 8.9 - 11.7 gear ratio, and touring car applications with an 6.5 - 9.3 gear ratio INCLUDES Tamiya 10.5T Sensored Brushless Motor with Wire Leads and Instruction Sheet REQUIREMENTS Sensored ESC such as the Tamiya TBLE series SPECIFICATIONS Input Voltage: 6.6 - 7.2V Length: 2.3" (58mm) Diameter: 1.4" (36mm) Weight: 6.28oz (178g) Wire Lead Size: 12AWG Shaft Diameter: .125" (3.17mm)

1.395,-

KJØP
Hovedbilde Robinson Racing 18T 0180 Pinion Gear 32P 18T
Robinson Racing 18T 0180 Pinion Gear 32P 18T
Robinson's standard alloy 32 pitch pinion gears is a good replacment for many cars that are 32 pitch       (11)

89,-

Ikke på lager
Hovedbilde Robinson Racing 16T 0160 Pinion Gear 32P
Robinson Racing 16T 0160 Pinion Gear 32P
Robinson's standard alloy 32 pitch pinion gears are a great replacment for most Kyosho cars and any cars that are 32 pitch.       (11)

89,-

KJØP
Hovedbilde Robinson Racing 21T 0210 Pinion Gear 32P
Robinson Racing 21T 0210 Pinion Gear 32P
Robinson's standard alloy 32 pitch pinion gears are a great replacment for most Kyosho cars and any cars that are 32 pitch. They are available in sizes from 9 to 22 tooth.

99,-

KJØP
Hovedbilde Robinson Racing 1117 Pinion Gear Metric 17T
Robinson Racing 1117 Pinion Gear Metric 17T
These are .6 mod pinion gears. These are used on cars such as the Tamiya touring cars(this works on the TA01 and the TA02, but NOT on the TA03). They also work on some other Tamiya cars, and on the Kyosho Ultima Pro, and the Ultima Pro XL. These gears are available in sizes from 12 to 24 teeth. Includes a pinion set screw.     SPECIFICATIONS Number of Teeth: 17 Pitch: .6 Mod Bore: 1/8" 0.125" (3.2mm)

89,-

KJØP
Hovedbilde Robinson Racing 1118 Pinion Gear Metric 18T
Robinson Racing 1118 Pinion Gear Metric 18T
These are .6 mod pinion gears. These are used on cars such as the Tamiya touring cars (this works on the TA01 and the TA02, but NOT on the TA03). They also work on some other Tamiya cars, and on the Kyosho Ultima Pro, and the Ultima Pro XL. These gears are available in sizes from 12 to 24 teeth. Includes a pinion set screw.     SPECIFICATIONS Number of Teeth: 18 Pitch: .6 Mod Bore: 1/8" 0.125" (3.2mm)

89,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png