Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / 86086-4 E-Revo 2.0 1/10 Brushless / RC Screwz SS Screw Set-TRA E-Revo 2.0 VXL
-7%

RC Screwz SS Screw Set-TRA E-Revo 2.0 VXL

Art.nr: RCZTRA082

699,-

749,-

- 7%
RCScrewZ

RCScrewZ
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

RC Screwz SS Screw Set-TRA E-Revo 2.0 VXL

Produsent

RCScrewZ

RCScrewZ

Kunder kjøpte også

Hovedbilde RPM 80422 Body Savers for Traxxas E-Revo Hovedbilde RPM 80422 Body Savers for Traxxas E-Revo
RPM 80422 Body Savers for Traxxas E-Revo "2.0"
RPM Body Savers for Traxxas E-Revo "2.0" Quick Notes: Works with new or damaged bodies Disguised for improved visual appeal Works with Traxxas #8611, #8611A & #8611G bodies RPM engineers examined a brand new E-Revo 2.0 body and were shocked when they discovered cracks around the body mount holes in the body. This vehicle had never been run and the holes were already weakened. If you’ve managed to pull any of your body mounting screws through the body or if you think it’s about to happen, we have the perfect solution to save you from ugly, thick body washers or worse, buying a new body for $85! RPM Body Savers for the E-Revo 2.0 are a simple, yet clever solution to solve that problem. We disguise our Body Savers in two separate ways. Out front, they look like molded hood vents while in the rear, they look like exposed sections of a roll cage. It’s a perfect way to camouflage their intended purpose and yet still keep the body firmly attached. The way they work is straightforward; there are two pairs of screws holding the sub-frame of the body mounting system to the body in both the front and rear of the truck. Our Body Savers tie two pairs of screws together, dispersing the pressure of holding the body to the sub-frame over a wide area of the body (wider than currently available washers too). Even if the bottom of the mounting holes in the body are completely ripped out from prior crashes, our system still works! RPM Body Savers are molded in black from our ultra strong, engineering grade nylons for unmatched performance and are sold with four Body Savers in each kit (two for the front and two for the rear). Tech Notes: RPM Body Savers only work with Traxxas #8611, #8611A & #8611G bodies. They have not been tested nor are they guaranteed to work with any other Traxxas or aftermarket bodies

149,-

KJØP
Hovedbilde Traxxas 8611 Body E-Revo 2 (clear requires painting) ...
Traxxas 8611 Body E-Revo 2 (clear requires painting) ...
Body, E-Revo (clear, requires painting)/window, grill, lights decal sheet

349,-

369,-

KJØP
-5%
Hovedbilde Traxxas 8637 Skid Plate Set
Traxxas 8637 Skid Plate Set
Skid plate set, front/ skid plate, rear/ 3x10 BCS (6)/ 3x30 BCS (1) (fits #8629 & 8630 bulkheads)

95,-

KJØP
Hovedbilde Traxxas 8635 Axle Carriers Left & Right (1+1)
Traxxas 8635 Axle Carriers Left & Right (1+1)
Axle carriers, left & right (1 each) (use with 8x16mm & 17x26mm ball bearings)/ dust boot retainers (4)

119,-

KJØP
Hovedbilde Dusty Motors DMC0011 Dust Protection Cover for E-revo ...
Dusty Motors DMC0011 Dust Protection Cover for E-revo ...
Dusty Motors Dust Protection Cover for Traxxas E-revo & Summit - Black DMC0011 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting  batteries and turning a model on/off without removing a shroud. While taking a break between the running  stints the shroud can be unzipped to allow ESC and motor to cool quicker.  Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open  area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to  keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

359,-

KJØP
Hovedbilde RPM 80452 Bumper Front Black Revo 3.3, E-Revo (Old) ...
RPM 80452 Bumper Front Black Revo 3.3, E-Revo (Old) ...
RPM Tubular Front Bumper for Revo 3.3 & E-Revo (old) Replaces stock Traxxas #5335 Quick Links: Replaces stock Traxxas #5335 Matching Revo Rear Bumper is available Supporting Bumper Mount is available RPM provides the added protection the Revo needs with unbelievable strength and durability in our tubular front and rear bumpers. RPM bumpers for the Traxxas Revo are made from our bulletproof blend of nylons. RPM nylons are the best material for protecting your Revo since our materials are lightweight, inexpensive, and tougher than anything else available! We’ve re-engineered the front and rear bumpers to improve strength, especially around the screw holes, which eliminates potential weak points, and we’ve designed a recessed flat where with a little creativity, anyone can add in a customized, scale license plate. Additionally, our rear bumper has a flat area perfect for adding a ball stud for a faux ball hitch (see our FAQ page of our website for more information). Our colors are molded into each bumper so scratches and nicks won’t cut through to a different color underneath. In addition, our chrome bumpers are molded over our metallic silver bumper so scratches won’t show as easily as a stock bumper (where black is the base color). RPM bumpers carry our lifetime warranty against breakage and will hold up to the roughest of punishment.

119,-

KJØP
Hovedbilde RPM 80482 Rear Tubular Bumper Black Traxxas Revo ...
RPM 80482 Rear Tubular Bumper Black Traxxas Revo ...
RPM Rear Bumper for Revo 3.3 & E-Revo (old) - Black Replaces stock Traxxas #5336 Quick Notes: Replaces stock Traxxas #5336 RPM provides the added protection the Revo needs with unbelievable strength and durability in our tubular front and rear bumpers. RPM bumpers for the Traxxas Revo are made from our bulletproof blend of nylons. RPM nylons are the best material for protecting your Revo since our materials are lightweight, inexpensive, and tougher than anything else available! We’ve re-engineered the front and rear bumpers to improve strength, especially around the screw holes, which eliminates potential weak points, and we’ve designed a recessed flat where with a little creativity, anyone can add in a customized, scale license plate. Additionally, our rear bumper has a flat area perfect for adding a ball stud for a faux ball hitch (see our FAQ page of our website for more information). Our colors are molded into each bumper so scratches and nicks won’t cut through to a different color underneath. In addition, our chrome bumpers are molded over our metallic silver bumper so scratches won’t show as easily as a stock bumper (where black is the base color). RPM bumpers carry our lifetime warranty against breakage and will hold up to the roughest of punishment. Tech Notes: RPM Revo rear bumpers fit all 1/10th scale Traxxas Revo trucks, including nitro and electric versions. RPM rear bumpers are not compatible with stock Traxxas wheelie bars.

89,-

KJØP
Hovedbilde Traxxas 5472 Wheelie Bar Assembled Revo
Traxxas 5472 Wheelie Bar Assembled Revo
This is the optional Assembled Wheelie Bar for all versions              of the Traxxas Revo except the 1/16 E-Revo. FEATURES: Nylon construction           Black in color INCLUDES: One Assembled Wheelie Bar REQUIRES: Installation on the Traxxas Revo Sjekk : Trx 5186 eller Trx 5186A

249,-

279,-

KJØP
-11%
Hovedbilde Traxxas 5338R Aluminum Toe Links Red(2) Hovedbilde Traxxas 5338R Aluminum Toe Links Red(2)
Traxxas 5338R Aluminum Toe Links Red(2)
These are the optional Lightweight 128mm Toe Links with Rod Ends                        for the Traxxas Revo Models. FEATURES: 30% lighter than stock steel toe links           4 times stiffer and more than double the strength of aftermarket             titanium           Unique hollow tube design using 7075-T6 aluminum           Anodized red in color INCLUDES: Two Toe Links           4 Front and Rear Rod Ends           One 7mm Wrench REQUIRES: Installing on vehicle SPECS:    Length: 5.04" (128mm)           Diameter: 0.45" (11.5mm)

309,-

Ikke på lager
Hovedbilde RPM 70375 Front Left A-Arms Blue Traxxas Summit part ...
RPM 70375 Front Left A-Arms Blue Traxxas Summit part ...
Trykk her for høyre side.   RPM Front Left Blue A-arms for the Traxxas Summit, Revo & E-Revo (1.0) Quick Notes: Fits the Traxxas Summit, Revo & E-Revo (1.0) Replaces stock Traxxas #5332 Matching Front Right A-arms also available Matching True-Track Rear End Conversion Kit available (for the Revo & E-Revo 1.0) In response to repeated customer demands, we have a set of front left A-arms now available for the Traxxas Summit. Our front right A-arms for the Traxxas Revo (reference RPM #80212 & #80215) are already compatible with the Summit but due to the extended T-Lock differential on the left side, our Revo front left A-arms would not fit. That is no longer an issue with these A-arms. With a revamped cross-brace to clear the T-Lock differential, our Summit front left A-arms will allow full suspension travel and significantly improve overall suspension durability. RPM front A-arms for the Traxxas Summit are molded from our indestructible blend of engineering grade nylons for unmatched performance and durability. Every RPM molded part in manufactured in the USA and carries with it a limited lifetime warranty against breakage. If you’re tired of replacing broken stock parts over and over, give RPM a try. INCLUDES Front Upper and Lower Left A-Arms  Instruction Sheet

209,-

KJØP
Hovedbilde RPM 80215 Front A-Arms Right Blue Traxxas Revo (2) ...
RPM 80215 Front A-Arms Right Blue Traxxas Revo (2) ...
  RPM Front Right Arms for the Summit, Revo 3.3 & E-Revo (old) - Blue Replaces stock Traxxas #5331 Quick Notes: Fits Traxxas Summit, Revo & E-Revo Replaces stock Traxxas #5331 Matching Front Left A-arms are also available Matching True-Track Rear End Conversion Kits are available (for the Revo & E-Revo) RPM Revo A-Arms are the only alternative to bulletproof performance that rivals any competition! Features: Nearly identical in weight to stock A-Arms. Redesigned for incredible durability under the toughest of conditions. More wear resistant than any other material available. Excess A-arm end-play has been eliminated for more accurate caster and toe angle settings. Angled leading and trailing edges eliminate dirt build-up. No low-hanging cross-braces or shock mounting areas providing better ground clearance. Massive shock rod mounting areas for improved rigidity. Available in black & blue. Less than half the price of aluminum A-arms. Molded from our bulletproof blend of nylons and backed by our world renowned breakage warranty. Sold in sets of one upper and one lower A-arm.

209,-

KJØP
Hovedbilde Traxxas 5451R Steel Drive Shaft Revo/T-Maxx ... Hovedbilde Traxxas 5451R Steel Drive Shaft Revo/T-Maxx ...
Traxxas 5451R Steel Drive Shaft Revo/T-Maxx ...
This is a set of Steel Driveshafts for the Traxxas  Revo/Maxx. FEATURES: Steel construction           Can be used to replace a bent or damaged front center driveshaft           Assembled with inner & outer dust boots INCLUDES: Four steel constant-velocity driveshafts SPECS:    Length: 7" (177.8mm) between canter of ball ends           Diameter: .19"  (5mm)   Reservedeler:   Traxxas 5129 Driveshaft Assembly Rebuild Kit Revo/T-Maxx   Traxxas 5153 Drive Cups Inner Revo/T-Maxx (2)   Traxxas 5153R Drive Cups Inner Revo (2)   Traxxas 5154 Drive Shaft Steel Constant Velocity Revo/T-Maxx   Traxxas 5166 Stub Axle/Axle Sleeve Revo/T-Maxx        

899,-

949,-

KJØP
-5%
Hovedbilde Traxxas 5318X Aluminum Pushrod Red Revo (2)
Traxxas 5318X Aluminum Pushrod Red Revo (2)
These are the (optional) Red Aluminum Pushrods for the Rocker Arms                         for the REVO from Traxxas         These go between the Rocker Arms and the Lower Suspension Arms           **Use with long travel or Progressive-1 Rocker Arm Set, TRX 5357.** FEATURES: Red Aluminum construction INCLUDES: Two Pushrods w/pre-installed rod ends and balls REQUIRES: Installing on the vehicle SPECS:    Length:   5.4" (137mm) end to end including rod ends           Diameter: 0.20"  (5mm) COMMENTS: For rod ends only use TRX 5347

155,-

KJØP
Hovedbilde Proline 1017510 Trencher LP 3.8 Hovedbilde Proline 1017510 Trencher LP 3.8
Proline 1017510 Trencher LP 3.8" All Terrain Tires ...
Trencher LP 3.8" All Terrain Tires Mounted for 17mm MT Front or Rear, Mounted on Raid Black 8x32 Removable Hex 17mm Wheels This is a pair of pre-mounted Trencher LP 3.8" Monster Truck Tires. Pro-Line is stepping up the 3.8" tire game for Traxxas® MAXX® fans with the all-new Trencher LP 3.8" tires! The Trencher LP tires are designed to give your MT optimal traction on just about any surface and come in at 2.96" wide by 5.6" tall making it perfect for your MAXX® or Low Profile 1:8 Monster Truck build. Super cool horizontal H shaped treads give your MT ridiculous amounts of forward bite and with the super tall Trencher tread, you'll find that durability and longevity you have been searching for. The new Trencher LP 3.8" tires come Pre-Mounted on the next-generation 3.8" wheel design from Pro-Line, the Raid 3.8" Removable Hex Wheel! Imagine being able to replace a damaged wheel hex without needing to replace your glued tires! These new Raid 3.8" wheels make this possible by using a unique 8x32 interlocking hex design that is secured to the wheel by 8 M3 screws that are spaced 32mm across. The 17mm ½" offset hexes are included and are also available separately (6345-00). The built-in adjustability and ease of use make this a new must-have wheel for backyard bashers everywhere! Be the first to own the Trencher LP 3.8" tires at your local bash spot. Get yours today! Features: Tire Features: Aggressive Trencher Tread Design Low Profile Tire size perfect for the MAXX® Soft M2 Compound Provides Incredible Grip on a Variety of Surfaces Horizontal H Shaped Tread for Ridiculous Amounts of Side-to-Side Stability New Tire Size comes in at 2.96" wide and 5.6" tall Soft Foam Inserts Included Made in the USA, since 1982 - Read about Pro-Line Racing's History Wheel Features: Removable Hexes Allow you to Easily Replace Damaged Hexes 17mm Wide Offset 8x32 Hexes are Included Upgrade your Hex to 17mm Aluminum (1/2" or Zero Offset) or 20mm Aluminum Wheel Made from High-strength, Durable DuPont Nylon Material Raid 10-spoke Wheel Design Mimics Full-size Racing Wheels M3 Wheel Hex Hardware Included Included: Pre-Mounted Trencher LP 3.8" Tires on Raid Black 8x32 Removable Hex Wheels (2 pcs) 8x32 to 17mm Hex Adapters (2 pcs) M3 x 12mm long SHCS hardware (16 pcs) Fits: E-REVO® 2.0 SUMMIT® MAXX® Tekno MT410 ARRMA® Kraton™ Other Monster Trucks with 17mm Hexes Specs: Tire Compound Colored Dot Chart Height:   5.60" (142mm) Width:   2.96" (75mm)

749,-

799,-

KJØP
-6%
Hovedbilde Vant 7.4V 7200mAh 30C DEANS – XH
Vant 7.4V 7200mAh 30C DEANS – XH
7.4V 7200mAh 30C DEANS – XH   22x43x127

769,-

849,-

KJØP
-9%
Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ... Hovedbilde Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...
Traxxas 2250 Servo High-Torque 330 24kg Metal gear ...
High-Torque 330 Blue Servo The Traxxas High-Torque 330 Blue servo combines maximum steering authority with a long list of high-performance features. The servo utilizes full metal gears, dual ball bearings, and an aluminum center section for added heat dissipation. A powerful coreless motor provides 330 ounce-inches of torque for the most demanding applications.* The High-Torque 330 servo is fully waterproof, not just “water resistant” and drops into most 1/10 Traxxas vehicles for that perfect factory fit. The Power to Perform With over 3 times more torque than the standard TRX 2075 servo, the High-Torque 400 provides noticeably faster turning speed and works great with TSM™ equipped vehicles. Traxxas High-Torque servos are the perfect upgrade for high-demand applications like Unlimited Desert Racer, Slash, Stampede, or almost any 1/10 Traxxas vehicle requiring extreme performance. Replace the E-Revo's dual servos with a single TRX 2255 for lighter weight, more torque, and lightning-quick steering response. Elevate your steering performance to the next level with the High-Torque red 400 servo.     For TRX-4 Installation The Traxxas High-Torque 400 Red servo represents a huge power upgrade for the TRX-4. When installing this servo, it is required that you use the High-Voltage BEC kit TRX 2262 and a steel servo horn TRX 8247X is recommended. Installing the BEC is easy with plug and play simplicity. The kit includes a larger receiver box cover to maintain total waterproof integrity and a Y harness for vehicles with LED light kits.   Waterproof Not "Water Resistant" Traxxas knows the difference between “water resistant” and waterproof. Traxxas High-Torque servos are completely waterproof to give you the freedom to run when you want, where you want. Power through streams and bogs without fear while trucks with “water resistant” servos are stuck on the sidelines.           HIGH-TORQUE 400 RED FEATURES Factory fit for drop-in installation into Traxxas Models Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management™ (TSM) 400 oz-in torque Metal gears Dual ball bearings Brushless motor technology Aluminum center case       SPECIFICATIONS Motor Type:   Brushless Operating Voltage:   6.0 - 7.4V DC Speed:   0.15 sec/60° Weight:   64g Gears:   Metal Output Spline:   25T Case:   Plastic top/bottom, anodized aluminum center Controller:   Digital   APPLICATION GUIDE   Compatible with most Traxxas 1/10 scale electric models* Compatible with TRX-4 models using High-Voltage BEC Kit #2262 and #8247X metal servo horn Compatible with Traxxas nitro models using rechargeable 5-cell battery packs Not recommended for X-Maxx     High-Torque Blue 330 Waterproof Metal-Gear Coreless Digital Servo For the ultimate experience in precision steering authority, two new high-torque metal gear waterproof servos are available from Traxxas. Traxxas high-torque servos are designed for a factory fit in 1/10 Traxxas vehicles and both servos feature full metal gears, dual ball bearings, and waterproof cases with aluminum center sections for added heat dissipation. Both servos are designed to work flawlessly with Traxxas Stability Management for laying down maximum power on any surface. The High-Torque Blue 330 is powered by a coreless motor for 24 kg/cm of torque and 0.19 transit time. For optimum control and responsiveness, the High-Torque Red 400 uses brushless motor technology for a massive 29 kg/cm of torque and 0.15 transit time.   Factory fit for drop-in installation into Traxxas models Waterproof 24 kg-cm of torque and 0.19 transit time Metal gears Dual ball bearings Coreless motor technology Aluminum center case SPECIFICATIONS: Motor Type: Coreless Operating Voltage: 6.0-7.4V Torque: 24 kg/cm @ 6.0V Speed: 0.19 sec/60° @ 6.0V Weight: 64g Gears: Metal Output Spline: 25T Case: Plastic top/bottom, anodized aluminum center Controller: Digital

895,-

995,-

KJØP
-10%
Hovedbilde Traxxas 2991 2S Battery/Dual iD Charger Completer Pack
Traxxas 2991 2S Battery/Dual iD Charger Completer Pack
Battery/charger completer pack (includes #2972 Dual iD charger (1), #2869X 7600mAh 7.4V 2-cell 25C LiPo battery (2))

2.995,-

3.495,-

KJØP
-14%
Hovedbilde Traxxas 2869X LiPo 2S 7.4V 7600mAh 25C w/iD Connector Hovedbilde Traxxas 2869X LiPo 2S 7.4V 7600mAh 25C w/iD Connector
Traxxas 2869X LiPo 2S 7.4V 7600mAh 25C w/iD Connector
This is the Traxxas Power Cell 7.4V 7600mAh 25C 2S LiPo Battery with iD Connector. FEATURES Semi rigid construction does not require a hard case and eliminates wire harness connectors that can loosen and fail Engineered specifically to fit Traxxas models iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings for specific battery MAXX cable high-efficiency 12 gauge silicone jacketed wire INCLUDES Traxxas Power Cell 7.4V 7600mAh 25C LiPo 2S Battery with iD Connector and Integrated Balance Connector REQUIREMENTS Balancer and LiPo compatible charger such as the Traxxas AC Powered EZ-Peak Plus Battery Charger, TRX2970 LiPo charging bag SPECIFICATIONS Configuration: 2S2P Continuous Discharge: 25C (190A) Max Burst Rate: 50C (380A) Watt Hours: 56.24 Charge Rate: 1C (7.6A) Max Charge Rate: 2C (15.2A) Dimensions: 6.1 x 0.98 x 1.8" (155 x 25 x 45mm) Weight: 13.2oz (375g)

995,-

1.095,-

KJØP
-9%
Hovedbilde Traxxas 6488X Gear 14T Pinion XO-1
Traxxas 6488X Gear 14T Pinion XO-1
This is the 14 Tooth 1.0 Metric Pitch Pinion Gear                 for the Traxxas XO-1 On-Road Car FEATURES: Hardened steel construction           Fits 5mm diameter motor shafts INCLUDES: 14 Tooth 1.0 Metric Pitch Pinion Gear

49,-

KJØP
Hovedbilde Traxxas 5348 Toe Link Rod Ends Revo (4)
Traxxas 5348 Toe Link Rod Ends Revo (4)
This is a set of Rod Ends for the Traxxas Revo.               They are to be used on the Rear Toe-Link Rods only. FEATURES: Plastic construction           Black in color INCLUDES: Four Rear Toe-Link Rod Ends REQUIRES: Assembly to vehicle SPECS:    Length:              23mm (.91")           Width at ball joint: 11mm (.43") COMMENTS: Ring on the rod end shaft denotes for Rear Toe Links only.           If Pivot Balls are needed, use TRX 5355 or 5355X

25,-

KJØP
Hovedbilde Traxxas 8654G Wheel hubs, splined, 17mm ...
Traxxas 8654G Wheel hubs, splined, 17mm ...
Wheel hubs, splined, 17mm (green-anodized) (4)/ 4x5 GS (4), 3x14mm pin (4) Set of four 17 mm green-anodized aluminum wheel hubs combine high-profile looks with superior strength. The special splined design locks into Traxxas splined wheels for precise alignment and unsurpassed grip. Includes 4x5 mm grub screws (4), and 3x14 mm pins (4). PLEASE NOTE: Maxx models require 8950X (standard width) or 8996X (WideMaxx®) Steel constant-velocity

239,-

259,-

KJØP
-8%
Hovedbilde Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...
Traxxas 5378X Pivot Ball Caps (4) Dust Boots Rubber ...
This is the replacement Pivot Ball and Dust Cap Boot Set             for the Traxxas Revo, E-Revo and T-Maxx 3.3 vehicles. FEATURES: Nylon and Rubber Construction           Blue and Black in Color INCLUDES: Four Blue Rubber Pivot Ball Boots           Four Black Dust Boot Retainer           Four Blue Notched Dust Boot Retainer           Four Blue Rubber Boot Plugs           Four nylon Pivot Ball Retainers           Instruction sheet REQUIRES: Two packages needed to complete truck

89,-

99,-

KJØP
-10%
Hovedbilde Traxxas 6494X Pinion Gear 20T 1.0M Pitch for 5mm shaft
Traxxas 6494X Pinion Gear 20T 1.0M Pitch for 5mm shaft
Gear, 20-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (for use only with steel spur gears) 20-tooth pinion gear (1.0 metric pitch) fits 5 mm motor shafts and includes set screw. Traxxas pinion gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model.

79,-

89,-

KJØP
-11%
Hovedbilde Traxxas 5186 Mounted Wheelie Bar Tires/Wheels Red (2) Hovedbilde Traxxas 5186 Mounted Wheelie Bar Tires/Wheels Red (2)
Traxxas 5186 Mounted Wheelie Bar Tires/Wheels Red (2)
These are the Rubber Tires and Wheels for the          Wheelie Bar for all Traxxas vehicles. FEATURES: Tires constructed of rubber, black in color with with "TRAXXAS"             written in white on the sidewalls           Aluminum wheels, anodized red in color INCLUDES: Two Rubber Tires Trx 5185  four 5x8mm Ball Bearings, four Axles and             two Wheels REQUIRES: Attaching to wheelie bar

239,-

259,-

KJØP
-8%
Hovedbilde Traxxas 8658 Yokes for Transmission (2)
Traxxas 8658 Yokes for Transmission (2)
Yokes, transmission (2)/ 4x15mm screw pins (2)

59,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png