SamiRC
0,-
Lukk
Handlekurven er tom

Subtotal: 0,-

HPI Racing 101850 - 1/8 Vorza Flux HP Brushless 4WD 2.4GHz RTR

Art.nr: 101850
6.995,- 8.495,- -18%

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

** Ikke på lager

This is the 2.4GHz radio controlled, brushless electric powered, ready to run
 1/8 scale HPI Vorza Flux HP Buggy.

 

 


FEATURES

 Chassis: 6061 aluminum 0.16" (4mm) thick, with nylon dirt guards
 Drive: Four wheel shaft with sealed drivetrain
 Motor: Flux Tork 2200kV brushless with aluminum case, machined
 cooling fins, 5mm shaft
 Pinion Gear: 15T steel
 Spur Gear: 48 tooth steel
 Motor Plate: 7075 aluminum 0.12" (3mm) thick with 0.31" (8mm) thick
 billet machined aluminum clamps
 Radio: 2.4GHz
 ESC: HPI Flux Blur Brushless ESC, 6S LiPo compatible with Deans
 battery connectors, 6mm bullet motor connectors and cooling fan
 PC programmable, USB Programming Kit required
 Shocks: Oil-filled 16mm Big Bore aluminum bodied
 Shock Towers: Aluminum, 0.16" (4mm) thick
 Differentials: Three with spiral cut gears, oil filled
 Pinion Gear: Hardened steel 15 tooth
 Main Gear: Hardened steel 48 tooth
 Body: Trimmed and painted 1/8 scale buggy body with nylon wing
 Battery Tray: LiPo ready with secure hook and loop straps
 Suspension: Long suspension arms for stability and balance, front and
 rear sway bars
 Tires: HPI Proto, 1.65" (42mm) wide, 4.6" (117mm) outer diameter
 Wheels: V7 black chrome 1.65" (42mm) wide, 3.27" (83mm) diameter
 Caster: Adjustable, caster/toe-in refers to the angle of the front
 suspension when viewed from the side of the car in relation to the
 chassis
 Camber: Adjustable front and rear, camber refers to the angle of the
 tops of the tires from vertical when viewed from front or behind
 vehicle
 Steering servo: SB-5 Metal Gear Servo 11.8kg-cm 6.0V

 


INCLUDES

RTR 1/8 scale HPI Vorza Flux HP Buggy with Brushless Motor & ESC,
 2.4GHz 2-ch Radio, Body, Wing, Tires, Wheels and Instruction Manual

 


REQUIREMENTS

 AA Batteries: Four for transmitter
 Batteries: Two 6-7 cell NiMH flat (not stick packs) at least 4000mAh
 soldered packs only, no welded tabs OR
 two 2S or 3S LiPo with at least 25C rating
 Battery Charger: To match selected batteries
 Connectors: Two Deans Female Plugs if selected
 batteries do not have them
 Track equipment

 


SPECIFICATIONS

Vehicle-
 Length: 20" (508mm)
 Width: 12" (205mm)
 Height: 7" (178mm)
 Wheelbase: 12-13/16" (325mm)
 Body-
 Length: 13.1" (334mm)
 Width: 7.71"(196mm)
 Height: 3.8" (98mm)

Kunder kjøpte også

Trykk ENTER for å søke