This is the Hitec HS-5805 Mega Scale Digital Metal Gear Servo.
FEATURES
For .60 class or larger aircraft, 14 scale car steering or throttle
and gasoline powered boats
Programmable digital amplifier with MOSFET drive
Four metal gears with resin first gear
Dual ball bearings
Heavy duty horns and hardware
Water and dust tight
INCLUDES
Hitec HS-5805 Mega Scale Servo with S Connector
Mega Horn and Hardware set, HRCM6318
Y-Harness
Instruction Sheet
REQUIREMENTS
Installing in model, connecting linkage and connecting to receiver,
see COMMENTS below
SPECIFICATIONS
Operating Speed: 0.19sec60 4.8V
0.14sec60 6.0V
Output Torque: 19.8kg cm (275oz-in) 4.8V
24.7kg cm (343oz in) 6.0V
Power Consumption: 800mA unloaded
Size: 2.59 x 1.18 x 2.26 (66 x 30 x 57.6mm)
Weight: 6.95oz (197g)
Length of Four Point Horn: 2.4 (61mm) at longest point
Length of Single Arm: 1.8 (47mm) from center of hole to end
Diameter of Round Horn: 1.6 (39.8mm)
Thickness of Horns: 0.20 (5mm)
COMMENTS
Due to the high power consumption of the servo, a NiCd or NiMH
battery with at least 1200mAh (preferably 5-cells and 6V) must be
used.
Also, with a BEC equipped receiver the power should be fed directly
to the servo without going through the BEC regulator. A Y-harness
and instructions are provided with servo.
