Hopp til innhold
Hjem / Radio/Servo/Motor / Motor og regulator / Tilbehør El-motorer / Castle Creation 011013500 B-Link Bluetooth Adapter
-26%

Castle Creation 011013500 B-Link Bluetooth Adapter

Art.nr: 011-0135-00

699,-

949,-

- 26%
Castle Creations

Castle Creations
På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon


Castle B-LINK Waterproof Bluetooth Adapter

Control at your fingertips!

Castle Link™ ESC tuning is an essential component for customizing vehicle performance for many Castle Creations’ customers. While the controllers are plug and play, optimizing a Castle ESC through the Castle Link Programming Suite unlocks the full range of capabilities that set Castle apart from the competition. Users enjoy the ability to adjust many variables to enhance their experience including throttle, braking curve, drag brake, reverse type and more. The Castle B-LINK™ Bluetooth™ Adapter enables users to wirelessly program settings on current Castle Creations ESCs, many older models and the BEC 2.0/BEC Pro on Apple iOS devices. A complete listing of compatible ESCs and accessories can be found here. The free Castle Link app for iOS is available on the Apple App Store for use with iPhones and iPads, and once downloaded, it does not require a data connection and can be used anywhere, including remote areas. For Android users, a version of the app will be released at a future date, and the B-LINK adapter will be compatible.

FEATURES:

  • WIRELESS BLUETOOTH COMMUNICATION allows you to interface with most Castle Link compatible ESCs and accessories to change parameters and update firmware.
  • COMPACT AND LIGHTWEIGHT at 30.48 x 20.55 x 6.55 mm and 6.62g, it can be installed in the vehicle or airframe without significantly increasing model weight.
  • CONVENIENT WATERPROOF DESIGN allows you to quickly adjust settings in the field without disconnecting or disassembling the model. It can stay installed in the model or be easily swapped between models.
  • FREE APP DOWNLOAD is readily available in the Apple App Store. Once downloaded it does not require a data connection so it can be used in the most remote of areas and won’t use data.
  • EASY TO USE application can be used with multiple B-Link Bluetooth Adapters or can store model information and allow you to use one adapter on multiple models.
  • PASSCODE PROTECTED with (user-selectable) 4-digit code to prevent unwanted tampering with your settings.
  • SYNC information between multiple iOS devices by creating a free account (requires internet connection to sync database).


Technical Specifications: 

  • Input Voltage: Minimum: 4.5V - Maximum: 13V
  • Max Continuous Current:  10A
  • Maximum Burst Current: 20A
  • Dimensions (with wires): 184.15 x 20.55 x 6.8mm
  • Dimensions (w/o wires): 30.48 x 20.55 x 6.8 mm
  • Weight: 6.62g


Needed for Operation:

  • Castle Link App found at Apple App Store and compatible ESC and/or Accessory


Tech Notes:

  • Not compatible with Castle Telemetry Link for Spektrum XBus and Futaba S.Bus2





Castle Link™ ESC tuning is an essential component of customization for many of our customers. While our controllers are plug and play, the benefits of fine tuning your Castle ESC through the Castle Link Programming Suite have only reinforced the sophistication and value of the Castle brand. Not only do you get the ability to adjust many variables to enhance your experience, you have the assurance that firmware updates for future features and improvements for your controller are provided at no cost to you. Discover just how easily and quickly you can reign in tuning with the release of the Castle B-LINK™ BLUETOOTH® ADAPTER, which will allow most Castle Link compatible products to be programmed via Bluetooth enabled mobile devices using our free application, with firmware updating to be added soon. 

The initial release is supported on Apple iOS platforms only; for Android users, a version of the app will be released at a future date, and the B-LINK adapter will be compatible. All current Castle Creations ESCs, many older units and the BEC 2.0 and BEC Pro are supported, for a complete listing of compatible ESCs and accessories please view this PDF file. 

With the Castle Link, you can use your Windows™ PC or Apple iPhone™ to easily program your controller. 

Adjustable settings include:

  • Throttle
  • Braking curve
  • Drag brake
  • Auto LiPo cutoff
  • Punch Control
  • Reverse Type
  • Motor Type


Additional Castle Link benefits include:

  • Access to all firmware updates, including added features sets released from Castle Engineering, at no charge
  • Intuitive Demo Mode capability
  • Ability to save setup profiles for later use


Castle Link includes all code for all Castle Link compatible hobby products in one convenient download. Beta and standard releases, including most of the prior versions, are available to users in this bundle.


Note: Castle Link software requires a Castle Link USB or Bluetooth Adapter - sold separately - and a computer that is running Windows or an Apple mobile device. Castle Link is compatible with Windows Vista, Windows 7, Windows 8, Windows 10 and the latest iOS.

Macintosh desktop or laptop users may take advantage of software such as Parallels Desktop, VMware Fusion, or Apple's Boot Camp along with Windows Vista, Windows 7, Windows 8, or Windows10 to run the Castle Link software, provided the Macintosh has an Intel processor. Macintosh installation is not supported by Castle Creations.

Screen shots from Castle Link iOS APP on a iPhone 8:

  

iPad Screen Shot:

Produsent

Castle Creations

Castle Creations

Castle Creations makes the best electronic speed controllers in the industry, possibly the world!  Our engineers have spent countless hours integrating features and firmware that no other manufacturers can match.

Speed Controllers enabled with SmartSense use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat.

Relaterte produkter

 

Hovedbilde Castle Creation Motor Sensored Inrunner 4-pole ... Hovedbilde Castle Creation Motor Sensored Inrunner 4-pole ...
Castle Creation Motor Sensored Inrunner 4-pole ...
Art.nr: CC060-0064-00
Copied
Castle 2028 1Y Sensored Brushless Motor - 800Kv We take OVERPOWERING seriously. FEATURES: Minimum Input Voltage : 3S Maximum Input Voltage : 12S Sensored Capable : Yes Running modes include Sensored and an ULTRA-EFFICIENT sensorless mode. High-strength, high-temperature grade neodymium sintered magnets combined with High-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions. Oversized NMB bearings and vibration dampening system ensure the longest bearing life possible. Our proprietary winding techniques allow us to produce a stator assembly that is the lowest possible resistance, resulting in a cooler running motor. Dual sensor ports to ensure optimal installation in your large-scale vehicle. Updated modern and sleek design; looks as cool as it performs. The Castle 2028 Extreme 800KV motor now has an IMPROVED 4-POLE 12-SLOT design that boasts exceptional EFFICIENCY and produces LESS HEAT. If you need LARGE-SCALE POWER for LARGE-SCALE VEHICLES the new BRUSHLESS SENSORED 2028-800KV motor will no doubt hold up to the heavy throttle and extended usage that 1/5th scale vehicles like the Losi 5IVE-T, 5IVE-B or DBXL-E encounter. It is the perfect upgrade for any 1:5 scale RC hobby vehicles (including gas to electric conversions) weighing up to 30 lbs for 2WD and 25 lbs. for 4WD. The 2028 Extreme can easily run in the 10 horsepower range* *Burst power output for durations typical of vehicle acceleration. Without a robust and reliable design, efficiency will only go so far. RC enthusiasts love pushing their equipment to the edge. The Castle engineers know this and spared no expense when developing a design that could hold up to the harsh conditions that the RC community will throw at it, resulting in a cooler running motor. A cooler motor has a longer lifetime. Construction of our motor required careful component selection; each verified through internal testing to ensure the HIGHEST EFFICIENCY possible. In the end, the result is a motor with unmatched quality, performance, and reliability. We wouldn’t put our name on anything less. Specifications: Input Voltage Range: 12S MAX Kv: 800 Max. RPM: 45,000 Size: Length: 112.7mm Diameter: 56.3mm Weight (w/wires): 1.25kg Shaft Size: Length: 30mm Diameter: 8mm Mounting Hole Specifications: 4mm @ 30mm Cooling Fan: Available, but not included. Connectors: 8.0mm male connectors, 250mm sensor wire. Items Needed for Operation: Compatible Electronic Speed Control (ESC) Product Use Statements: Monitor motor temperatures closely; overheating a motor will cause permanent damage to the magnets. Never exceed 180° F on the the motor or ESC. Application Guidelines: The 2028-800KV is a water resistant design. The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. We recommend applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments. Recommended ESC(s): Mamba XL X Mamba Monster X 8S (requires changing bullets to 6.5mm) Max. Recommended Vehicle Weight: 4WD vehicles weighing less than 11kg. 2WD vehicles weighing less than 13.6kg. Tech Notes: Running modes: Sensorless and Sensored

4.195,-

4.895,-

KJØP
-14%
Hovedbilde MAMBA X Sensored ESC 25,2V 8A Peak BEC WP Hovedbilde MAMBA X Sensored ESC 25,2V 8A Peak BEC WP
MAMBA X Sensored ESC 25,2V 8A Peak BEC WP
Art.nr: 010-0155-00
Copied
MAMBA X, 25.2V WP ESC, 8A PEAK BEC, DATALOGGING Meet the next generation. Castle Creations is proud to announce our new flagship surface product, the MAMBA X EXTREME 1:10 SCALE WATERPROOF ESC. We at Castle wanted to address three main concepts while designing a new ESC for the modern day RC enthusiast; VERSATILITY, RELIABILITY, and PERFORMANCE. These  are the pillars of the Mamba X design and the driving forces behind the feature-packed controller.   Waterproof: Yes Telemetry Capable: Yes Data Logging: Yes Auxiliary Wire: Yes Minimum Input Voltage: 2S Maximum Input Voltage: 6S Sensored Capable: Yes The Mamba X is extremely versatile, capable of powering a wide variety of applications ranging from 2S to 6S and vehicles ranging from 1/10th scale to 1/8th scale*. Whether you are racing at the track with your 2wd buggy, bashing through mud puddles in your SCT or monster truck, or navigating a hardcore crawling excursion, this controller raises the bar to a whole new level. ESCs have a tough life - landing extreme jumps, experiencing accidental collisions, and splashing through the occasional puddle. As R/C enthusiast themselves, Castle engineers understand this and designed the Mamba X to endure these situations and power through them. It is housed in a rugged CNC-machined aluminum case and then potted in waterproof epoxy. This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case. The high performance Mamba X includes an integrated and powerful 8A adjustable BEC and can push the most extreme 1/10th scale setups and 1/8th scale* race buggies. SmartSense allows you to take advantage of smooth, cog-free, and predictable sensored starts, and Castle’s new and improved throttle response keeps you ahead of the competition. The Mamba X is proudly designed and manufactured in Olathe, Kansas and is backed by Castle Creations’ 1-year warranty and unparalleled "make-it-right" customer support. Call us, email us, or walk in our front door – we’re here to help. Features: Wide 2S to 6S input voltage range Sensored Motor Support Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support SmartSense™ Integrated Capacitors Removable 30 mm Cooling Fan Integrated 4 mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts SMARTSENSE™ Enabled by default, the Mamba X uses the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with electronic timing. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running. Your motor will produce more power and less heat. AUXILIARY WIRE FUNCTIONALITY The Mamba X allows “on-the-fly” adjustments to be made through the AUX wire once enabled in Castle Link. Once you have selected an AUX wire function, that setting can then be tuned from your transmitter while driving. Torque control, max throttle, max brake and drag brake adjustments are a sampling of the available modes. This real-time tuning allows you to quickly and easily fine-tune your system. DATALOGGING Enabled by default, the Mamba X captures and records performance data from your vehicle. This allows you to view a detailed turn-by-turn record of what your ESC actually experienced during the run. You will be able to record real-time data such as motor RPM, battery current and voltage, ESC and motor temperature, throttle input, and more. Download and analyze the collected data via Castle Link and make adjustments to maximize both performance and battery life. CASTLE LINK™ For nearly 20 years Castle engineers have been setting the bar for industry leading software functionality. The Castle Link Programming Suite is your ticket to creating the perfect setup. To gain access to the host of tuning parameters, simply redeem the coupon for the Castle Link adapter included with your Mamba X purchase. Download the simple to install software from our website and you are ready to personalize your controller’s parameters. Don’t forget to use the “check for updates” feature in Castle Link to download new software as it becomes available. New features are yours at no cost, a perk for choosing Castle. Technical Specs: Input Voltage Range: MIN: 2S LiPo - MAX: 6S LiPo (25.2V) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30 mm), fully removable** (see Product Use Statements below) Length: 54.4 mm Width: 35.2 mm Height: 30 mm Weight (with wires): 101 g Connectors: 4.0 mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 6.5mm Polarized Connectors, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof.   Application Guidelines: Intended for up to 6S (25.2 Volt) operation in vehicles weighing less than 9bs/4kg Recommended Motors: Castle 1406, 1410 and 1415 Sensored motors Max. Recommended Vehicle Weight: Less than 4kg with batteries & ready-to-run Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5 mm Polarized Connectors, Castle 4.0 mm Polarized Connectors, Traxxas® Power Connectors or T-connectors. *In 1/8th scale setups, the Mamba X is intended to be used for off-road racing in buggies weighing up to 9 lbs (including batteries and ready-to-run). In these 1/8th scale racing setups, the Mamba X should be run at 4S Lipo (16.8V) max and is recommended to be paired with the Castle 1512-1800Kv (P/N: 060-0062-00) or Castle 1512-2650Kv (P/N: 060-0061-00) motor, with appropriate gearing only.  

2.595,-

2.895,-

KJØP
-10%

Kunder kjøpte også

Hovedbilde Traxxas 3034 On/Off Switch with Charging Jack
Traxxas 3034 On/Off Switch with Charging Jack
Wiring harness for RX Power Pack, Traxxas nitro vehicles (includes on/off switch and charge jack)

69,-

KJØP
Hovedbilde Traxxas 5136X Differential Oil Kit Revo
Traxxas 5136X Differential Oil Kit Revo
This is the Diff Oil Kit for the Revo by Traxxas. FEATURES: Three bottles of oil (10K,30K,50K weights). INCLUDES: Three 2oz (59ml) bottles of oil           Three pour spouts

249,-

KJØP
Hovedbilde Castle Creations 011-0068-00 Polarized Bullet Conn. ... Hovedbilde Castle Creations 011-0068-00 Polarized Bullet Conn. ...
Castle Creations 011-0068-00 Polarized Bullet Conn. ...
The new polarized connectors will handle up to 200 amps of continuous current without breaking a sweat at any voltage level used in r/c applications. We started out with our industry leading 6.5mm CC Bullet connector, and ended up with the highest rated polarized connector on the market.   6.5 mm Polarized Connectors - Male Multi Pack Max Load: 200A continuous Max Wire Gauge: 6AWG Size (Male): 23.9 x 23 x 13.3 mm Weight: 30 g   Included: 6 male connectors & 3 housings

239,-

KJØP
Hovedbilde Traxxas 5033 Silicon Shock Oil Premium 40WT (500cSt) ...
Traxxas 5033 Silicon Shock Oil Premium 40WT (500cSt) ...
Silicon Shock Oil Premium 40WT (500cSt) 60ml

99,-

109,-

KJØP
-9%
Hovedbilde Traxxas 8536 Rear Bumper
Traxxas 8536 Rear Bumper
Bumper, rear/ bumper extension

149,-

KJØP
Hovedbilde Castle Creations 010015506 Mamba X 25.2V WP ... Hovedbilde Castle Creations 010015506 Mamba X 25.2V WP ...
Castle Creations 010015506 Mamba X 25.2V WP ...
  MAMBA X ESC WITH 1512-1800KV SENSORED 1/8 E-BUGGY EDITION The Mamba X represents the latest and greatest in Castle Creations Inc. ESC technology. Originally designed to overpower 1/10th scale buggies and trucks, the  ROAR APPROVED Mamba X also delivers amazing race capabilities for 1/8th scale eBuggy. After being extensively race-tested by Castle Creations' Lead Mechanical Engineer and Team Driver, Taylor James - the Mamba X has been approved for eBuggy racing with two of our most popular 15 Series Motors. This combo is a Mamba X ESC and 1512-1.5Y 1800kv motor for lighter 1/8th scale applications. Normally this motor is paired with our 1/8th scale Mamba Monster X ESC; but if you need to save some weight or need a smaller footprint, the Mamba X is more than capable of running this motor. This setup is recommended for 3s or 4s use in a vehicle weighing less than 4 kg and geared for no more than ~72 KPH. If you have a heavier vehicle, looking for more speed or just want to beat the ever loving snot out of your vehicle we would recommend picking up the Mamba Monster X combo (CC010-0145-05).   Waterproof : Yes Telemetry Capable : Yes Data Logging : Yes Auxiliary Wire : Yes Minimum Input Voltage : 3S Maximum Input Voltage : 4S Sensored Capable : Yes Coming in at just 101 grams the ROAR APPROVED Mamba X ESC packs features that will advance your game as a beginner or an expert on the track. You will POWER THROUGH extreme jumps and accidental collisions as the ESC is housed in a RUGGED CNC-MACHINED ALUMINUM CASE and then potted in waterproof epoxy. This not only protects the electronics but ensures any heat generated in the controller can easily be dissipated through the case. Combined with the IMPROVED 4-POLE 12-SLOT design of the sensored 1512 1.5Y 1800Kv (Awaiting ROAR approval) motor, you will experience PRECISE THROTTLE CONTROL and BUTTERY SMOOTH starts, plus the RAW POWER and LONGER RUN TIMES that these highly efficient motors produce. CASTLE’S INDUSTRY LEADING SOFTWARE is the ticket to creating a perfect setup, even before you hit the track. Our latest firmware versions were developed with the top-level racer in mind. They offer unparalleled performance and drivability that will leave the competition in the dust. They also offer useful features to assist in getting the most out of your setup. The Mamba X captures and RECORDS PERFORMANCE DATA via the DATA LOGGING function and allows users to view a detailed record of what the ESC actually experienced during a run. Gearing your 1:8th E-Buggy will be a breeze as the data logging will measure and record the internal temperature of both the ESC circuit board and the motor to give you the most accurate analysis of gearing changes, allowing maximum optimization of both performance and battery life. There is no need to carry a temp gun around anymore. Dialing in to the track has never been so simple with the “ON-THE-FLY ADJUSTMENTS” to be made through the AUXILIARY WIRE on the Mamba X ESC. Once enabled in Castle Link, you can fine-tune your car speed to the track you’re on using the MAX POWER AUXILIARY WIRE MODE. This setting, and several more, are easily accessed right from your transmitter in REAL TIME, WHILE DRIVING! The advantages of being able to adjust your car speed while on the track, without having to physically change gearing, will result in more confidence on the track, despite its condition. The CASTLE sensored motors will catapult your competitive advantage with the use of SMARTSENSE™ and QUIETSENSE™ TECHNOLOGY. SMARTSENSE™ is enabled by default in the Castle programming suite, and will use the motor’s sensors to provide smooth starts, excellent torque, and low-speed drivability.  Once the motor is turning, it seamlessly transitions to Castle’s ULTRA-EFFICIENT sensorless mode with ELECTRONIC TIMING. When running, a motor must transition between different load points and a different timing advance is required for optimal efficiency at each. Electronic timing in SMARTSENSE™ will advance timing automatically for peak performance during all driving conditions. This combines the best of both worlds in an unrivaled HYBRID between smooth sensored startups and high-efficiency sensorless running.  This makes the Mamba X system produce more power and less heat, which are two ingredients every racer knows to be beneficial.  QUIETSENSE™ describes an innovative advancement in the design of sensored motors. It shields the sensors from magnetic field noise through the use of a FLUX SHIELD™ in conjunction with  secondary Sense Magnets delivering even HIGHER PRECISION and MORE EFFICIENT startups. In the end this remarkably robust design, combined with the indisputable leading software functionality that Castle engineers are known for, makes for the ultimate powerhouse for your 1/8th scale E-Buggy. ESC Features: Wide 2S to 6S input voltage range (3-4S LiPo MAX w/1512-1800KV MOTOR) Sensored Motor Support (Castle X-Series Sensor Harness Included) Waterproof 8A Adjustable BEC (5.25V-8.0V) Data-logging Rugged CNC Aluminum Case Castle Link Programming Support SmartSense™ Integrated Capacitors Removable 30 mm Cooling Fan Integrated 4 mm Bullet Connectors 12 AWG Power Wires Waterproof Switch Audible Alerts Motor Features: 4-POLE 12-SLOT Rebuildable Design QUIETSENSE™ Technology ROAR Standard Sensor Port and Labeled Connections High-Performance 0.2 mm Steel Lamination Stacked Stator High-Strength Kevlar Wrap High-Strength, 180° C Grade, Neodymium Sintered Magnets Oversized, Low-Resistance, Gold-Plated Solder Tabs Oversized NMB Bearings M3 and M4 @ 25mm Mounting Hole 4 mm male Castle Bullet Connectors 210 mm length Sensor Wire Optional cooling fan coming soon Silicone coated sensor board Technical Controller Specs: Input Voltage Range: MIN: 2S LiPo / MAX: 6S LiPo (25.2V) (Max 4s with included motor) BEC Specifications: Adjustable: 5.5V, 6.0V, 7.5V. or 8.0V (8A Peak), default 5.5V Operating Environment: Waterproof* design allows for use in nearly any environment. Brake: Proportional Reversible: Yes, but may be disabled for racing. On/Off Switch: Yes Cooling Fan: Yes, factory equipped (30 mm), fully removable** (see Product Use Statements below) Size: L54.4 x W35.2 x H30 mm Weight (with wires): 101 g Connectors: 4.0 mm female bullets for motor connection. Items Needed for Operation: Battery Connector required; Castle 6.5 mm Polarized Connectors, Castle 4.0 mm Polarized Connectors, Traxxas® Power Connectors, or Deans® Ultra Plugs are recommended. Product Use Statements: *Although Mamba X is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Application Guidelines: Intended for up to 4s (25.2 Volt) operation in vehicles weighing less than 9bs/4kg with 1515 - 2200kv motor. Max. Recommended Vehicle Weight: Less than 4kg, with batteries, ready-to-run. Programmability: Fully programmable Castle feature set using Castle Link USB adapter and freely downloadable Castle Link Windows software. Telemetry Link Capable: Yes Tech Notes: Mamba X setups frequently hit 100+ amps in peaks and not all LiPos are created equal. Surge ratings should never be used to determine a pack's suitability for a brushless application. Recommended battery capacity for 1:10th and 1:8th scale vehicles is 5000mAh. We recommend using 30C continuous discharge or higher LiPo batteries (or high quality 25C batteries such as Traxxas® Power Cell). Our experience suggests using only mild gear ratios with NiMH cells. Do not attempt to use NiMH cells in extreme setups. Applying voltages higher than 25.2V will cause irreparable damage to ESC. We recommend a high-current connector designed for high-powered electric systems, rated for 70+ amps. Invest in connector sets made for high-powered electric systems such as our Castle 6.5 mm Polarized Connectors, Castle 4.0 mm Polarized Connectors, Traxxas® Power Connectors or T-Plugs Motor: Input Voltage Range: 3-6S LiPo; 4s maximum with Mamba X ESC Kv: 2200 Max. RPM: 60,000 Size: Length: 67.7 mm / Diameter: 40 mm (41.4 mm with fins) Weight (w/wires): 385 g Shaft Size: Length: 20 mm / Diameter: 5 mm Mounting Hole Specifications: M3 and M4 @ 25 mm Cooling Fan: Optional, coming soon! Connectors: 4 mm male Castle Bullet Connectors on 12AWG wire, includes 210 mm length sensor wire. Application Guidelines: Ideal for 1/8 scale off-road and on-road vehicles as well as 1/10 scale 4WD SCT up to 4 kg on 4s LiPo. Max. Recommended Vehicle Weight: See application guidelines Tech Notes: Running modes: SMARTSENSE™, Sensored only Water Resistant Design: The sensor board is coated with silicone conformal coating to protect the sensors from moisture. The sensor connections are not water resistant; water can cause signal loss which could result in loss of sensored capabilities. Castle recommended applying dielectric grease to the outside of the sensor wire connections after installation of the wire. Routine maintenance is recommended after running in wet conditions. Please refer to this document for running and maintaining motors in wet environments.

4.395,-

4.595,-

KJØP
-4%
Hovedbilde Traxxas 6509A 2-Channel TQi TSM Radio System
Traxxas 6509A 2-Channel TQi TSM Radio System
Traxxas 6509A - TQi 2-Ch 2.4 GHz Transmitter with TSM Receiver TQi 2.4 GHz High Output radio system, 2-channel, Traxxas® Link enabled, TSM® (2-ch transmitter, 5-ch micro receiver)  

1.295,-

1.495,-

KJØP
-13%
Hovedbilde Castle Creations MAMBA MONSTER X 8S, 33.6V ESC W / ... Hovedbilde Castle Creations MAMBA MONSTER X 8S, 33.6V ESC W / ...
Castle Creations MAMBA MONSTER X 8S, 33.6V ESC W / ...
Castle Creations MAMBA MONSTER X 8S, 33.6V ESC W / 1717-1650KV   MORE POWER - COOLER TEMPS - LONGER RUNS       Take your scale build or upgrade to the next level with Castle’s legendary brushless power. The MAMBA MONSTER X 8S, 33.6V ESC W/1717-1650KV SENSORED COMBO is a perfect upgrade for heavier 1:8th vehicles and lighter 1:6th vehicles weighing up to 20 lbs. and running up to 8S LiPo.   RACER TESTED - BASHER APPROVED   Drive fearlessly and punch that throttle! The MAMBA MONSTER X 8S utilizes Castle’s breakthrough technology CRYO-DRIVE™.  By reducing the rate at which the ESC heats up and removing heat more efficiently, your setup will be able to handle higher gear ratios, in heavier vehicles, with longer runs.  These software advancements work in parallel with a unique open housing design to allow increased directional airflow to cool critical components. With the integration of a 40mm cooling fan and a forged elliptical fin heatsink, the design maximizes airflow throughout the system, taking thermal performance to a whole new level. High-performance demands high quality and this ESC was designed with durability in mind. Constructed around a robust aluminum casing, the epoxy potting guarantees protection around the circuitry and ensures all-weather use. Mamba Monster X 8S is a workhorse, it will dominate in the harshest of environments. You can easily optimize the ESC for any driving condition, from rugged terrain to smooth pavement to the perils of rock and gravel. Create, save and download setup profiles through the Castle Link Programming Suite on your Windows™ PC, or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS.  Additional tuning flexibility awaits you with on-the-fly adjustments from your transmitter via the Auxiliary wire. Simply connect the white signal wire to an open radio channel, and enable the feature in Castle Link by selecting what Auxiliary function you would like to use. Access programming parameters such as Torque Control, Max Brake or Rock Race Mode. Optimize your vehicle for any racing or bashing application you can imagine! When paired with the newly released Castle 1717-1650KV, users with heavy, high speed rigs will experience controllable low-end ranges without sacrificing power, punch or speed.  SmartSense™ mode uses the motor’s sensors to start the motor to provide smooth starts, excellent torque, and low-speed drivability. Once the motor is spinning, it seamlessly transitions to Castle’s ultra-efficient sensorless mode. You’ll put more power to the ground, where it should be, instead of wasting it through raw heat and RPMs. Whether you are burning out, dropping the hammer, trigger happy, powering out, on-the rocks, off-the-rocks, wheeling or mud bogging - MAMBA MONSTER X 8S is ready to test the limits of your R/C car or truck.   FEATURES:   Input Voltage Range 2S-8S LiPo Sensorless, Sensored and SmartSense™ Running Modes Powerful Integrated 8A Peak Adjustable BEC (5.25V-8.0V) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to  protect the electronics and promote efficient heat transfer Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation Oversized factory equipped thermally controlled 40MM cooling fan Compatible with S.BUS2 Telemetry Link and Futaba T4PX and T7PX transmitters Waterproof design for all weather conditions Data logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately) and Castle Link app available on Google Play or Apple App Store Proudly designed and manufactured in Olathe, KS USA and backed by Castle Creations' 1-year warranty MOTOR FEATURES:     4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat Proprietary stator winding produces low internal resistance for a cooler running motor Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs   MAMBA MONSTER X 8S, 33.6V ESC W/1717-1650KV SENSORED COMES WITH: Mamba Monster X 8S ESC 4-POLE Sensored 1717-1650KV Motor Castle Sensor Harness Adapter 200mm Sensor Wire Mamba Decals Coupon for free Castle Link USB ESC Quick Start Guide Motor Quick Start Guide

5.995,-

6.395,-

KJØP
-6%
Hovedbilde Yeah Racing YBS-0019 BEARING SET (22PCS) FOR 1/8 ARRMA ... Hovedbilde Yeah Racing YBS-0019 BEARING SET (22PCS) FOR 1/8 ARRMA ...
Yeah Racing YBS-0019 BEARING SET (22PCS) FOR 1/8 ARRMA ...
Yeah Racing RC PTFE Bearing Set with Bearing Oil For 1/8 Talion 6S,Kraton 6S,Typhon 6S,Senton 6S,Outcast 6S,Notorious 6S,1/7 Mojave 6S, Limitless 6S,Infraction     Description Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!     Feature:   For : 1/8 Talion 6S,Kraton 6S,Typhon 6S,Senton 6S,Outcast 6S,Notorious 6S,1/7 Mojave 6S, Limitless 6S,Infraction Material : Steel Shielding: Rubber   Specification:   YB6014B (5x11x4mm) (2pcs) YB6015B (6x10x3mm) (4pcs) YB6022B (8x16x 5mm) (10pcs) YB6048B (15x21x 4mm) (4pcs) YB6054B (8x19x 6mm) (2pcs)   Include:   Total Bearing (22 Pcs)

179,-

199,-

KJØP
-10%
Hovedbilde Traxxas 8964 Shock Cap/Spring Perch/Retainer GT-Maxx ...
Traxxas 8964 Shock Cap/Spring Perch/Retainer GT-Maxx ...
Shock caps, GT-Maxx® shocks/ spring perch/ adjusters/ 2.5x14 CS (2) (for 2 shocks)

69,-

KJØP
Hovedbilde Tamiya 86016 PS-16 Polycarbonate Spray Metal Blue 3 oz
Tamiya 86016 PS-16 Polycarbonate Spray Metal Blue 3 oz
 This is Tamiya Color Spray Lacquer for Polycarbonate (PS-16 Metallic Blue).                           For Adult Modelers Only. FEATURES: Specially developed for decorating transparent polycarbonate bodies             used in R/C car modeling.           An appropriate amount of paint for finishing one R/C model.           This paint is impervious to oil and fuels, so they can be safely             used on gas-powered R/C bodies.           The color of the lid represents the color of paint. INCLUDES: (1) Spray Can of Lacquer SPECS:    Net Volume: 100ml COMMENTS: Never use this paint on plastic models.           Highly flammable.

109,-

119,-

KJØP
-8%
Hovedbilde Tamiya 86058 PS-58 Pearl Clear 100ml Spray Can
Tamiya 86058 PS-58 Pearl Clear 100ml Spray Can
 This is the PS-58 Pearl Clear Spray from Tamiya. FEATURES: Extremely useful for painting large surfaces           The color of the lid represents the color of paint           For use on polycarbonate surfaces INCLUDES: One 3.4oz (100ml) Spray Can of Pearl Clear Tamiya Color REQUIRES: Removing protective film from body before spraying COMMENTS: Highly Flammable

129,-

KJØP
Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm Hovedbilde Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm
Vapex VPLIPOBAGE Storage Bag-E Li-Po 260x130x150mm
VAPEX LiPo-Safe Storage Bag-E 260x130x150mm Protect your family and home from the potential hazard of LiPo charging. This LiPo Safe Bag is designed to limit and contain the fire caused by incorrectly or poorly functioning LiPo's, especially during charging but also during storage. Features: Perfect storage bag for most RC batteries Zipper Flap/Top Bag-A, B, C & D fits inside it Size: 260x130x150mm We urge all customers to always practice extreme caution when charging and never leave a charging battery unattended! Warning: Never leave batteries unattended while being charged Always ensure the battery and the LiPo Safe Bag is placed on a non-flammable surface such as concrete Always seal the LiPo Safe Bag while charging The LiPo Safe Bag is intended to reduce the chances of damage in the event of a LiPo fire

169,-

189,-

KJØP
-11%
Hovedbilde Yeah Racing YA-0215 High Speed Ball Bearing Oil / Lube Hovedbilde Yeah Racing YA-0215 High Speed Ball Bearing Oil / Lube
Yeah Racing YA-0215 High Speed Ball Bearing Oil / Lube
Yeah Racing High Speed Ball Bearing Oil / Lube   Description: Yeah Racing High Speed Bearing Oil / Lube. This product offers outstanding lubricating membrane and excellent corrosion-resistance. The design of narrow tips allow anti-flowing during dripping. This bearing lube can be used under the conditions of heavy load, high temperature and humidity.   About Ball Bearing: A row of small balls or cylinders sandwiched between two rotating rings. Bearings are used to support rotating parts, such as wheels, axles, or driveshafts. They are available in a variety of sizes and styles to suit nearly any application or driving condition. Bearings are infinitely smoother and more efficient than bushings. Keeping your bearings oiled increases their lifespan and efficiency - use specific bearing oil or any light oil (such as 3 in 1). Another source of description content is search & copy from google.   Feature: For: RC Ball Bearings Capacity: 15ml   Include: Yeah Racing (#YA-0215) High Speed Ball Bearing Oil / Lube (1pc)

89,-

KJØP
Hovedbilde DynoMAX B9238 Wire Red & Black 8AWG D4.3/6.5mm x 1m
DynoMAX B9238 Wire Red & Black 8AWG D4.3/6.5mm x 1m
D-MAX Wire Set Red & Black - 8AWG 1+1m This is a high quality wire with a high amount of copper strands making it very suitable for RC models and other hobby projects. The wire is covered with a silicone based insulation material and together with the high strand count it’s also very flexible.   Short and Thick is Good In electric high powered models we are recommending you to use short and as thick wires as possible (within reason) together with a matching diameter/area connector system for optimum performance. Specifications: Length: 1+1m WG Wire: 8 Area Wire: 10mm2 Diameter Wire: 4.3mm Diameter Insulation: 6.5mm Wire: 1650 Strands of Copper @ 0.08 mm Insulation: Silicone Based

279,-

299,-

KJØP
-7%
Hovedbilde D-Max Connector XT90S Anti-Spark pair
D-Max Connector XT90S Anti-Spark pair
INFORMATION Patent Pending Design Low Resistance Gold Plating 2U-3U Heat Resistant Housing (-20–200°C) Anti-Spark Function Solder Joint Protection Covers Compatible with std XT-90 connectors Max load: 90-120A Size (together) : L: 29 (49) x W21 x H10 mm Weight: 15 g (pair) Connector Diameter: 4.5 mm Wire Max dia: 4.0 mm (10AWG) Wire insulation max diameter: 6.5 mm Package includes: 1 pair of XT-90S connectors & solder covers

99,-

KJØP
Hovedbilde Castle Creation Copperhead 10 16,8V Sensored ESC Hovedbilde Castle Creation Copperhead 10 16,8V Sensored ESC
Castle Creation Copperhead 10 16,8V Sensored ESC
Castle COPPERHEAD 10, 16.8V, WP SENSORED ESC COPPERHEAD 10 FEATURES: Input Voltage Range : 2s-4s LiPo (ESC Only) SMARTSENSE™, SENSORED ONLY and BRUSHED Running Modes Selectable 5.5V or 7.5V (6A peak) internal BEC (Battery Eliminator Circuit) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs. ESC is housed in a durable injection molded case and potted in WATERPROOF epoxy to protect the electronics and promote efficient heat transfer. 30mm removable fan and DUAL USE FAN GUARD Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters AUDIBLE ALERTS for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. Convenient TRANSMITTER PROGRAMMING for six common adjustable settings inlcuding cutoff voltage and drag brake. DATA LOGGING LITE* captures and records performance data from your vehicle to maximize performance and battery life. (Battery Voltage Battery Ripple, Controller temp, Motor RPM, Motor Temp) SMARTSENSE™ uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode. CASTLE LINK USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ BLUETOOTH ADAPTER (sold separately) and Castle Link App available on Google Play or Apple App Store THERE'S A NEW PREDATOR IN TOWN. Meet the COPPERHEAD 10 PERFORMANCE ESC. It takes to the open road as well as it takes to no road at all. This completely new design rounds out our 1:10 scale offerings, positioned between the SIDEWINDER 4 as the entry-level upgrade and the MAMBA X as the extreme performance option. The COPPERHEAD 10 includes CRYO-DRIVE™ TECHNOLOGY, SENSORED MOTOR SUPPORT and DATA LOGGING LITE* with Castle’s signature reliability and performance. Throughout its development the Copperhead has been put to the test in all types of elements and performed as aggressively, or as stealthy, as desired. Whether on the trail dominating the gates or throwing dust on the dirt track, the Copperhead is power hungry when you need it and oozes smooth low-end power for technical low RPM performance. If your rig is outfitted with high-power servos (or additional torque increasing modifications) there is no need to worry about brown-outs, glitching or slow actuating servos. The Copperhead provides clean and constant power with its user selectable (through Castle Link) 5.5V or 7.5V (6A peak) internal BEC. The ESC can be installed and calibrated (plug and play) and provide immediate fuss-free wheel time. Through the interface-free manual programming mode, using your transmitter you can set your low-voltage cutoff, brake/reverse type, brake amount, drag brake, motor type and direction. Likewise, you can employ the use of the Castle Link Programming Suite on your Windows™ PC (coupon for free USB adapter included with purchase), or wirelessly with the convenience of the new B-Link™ Bluetooth™ Adapter and Castle Link app for Android or iOS. Additional Castle Link benefits include access to all firmware updates and added features sets released from Castle Engineering (at no charge), the ability to download and analyze your collected Data Log , an Intuitive Demo Mode capability as well as the option to save setup profiles (for multiple vehicles) for later use. For crawler setups or others that do not require an ESC cooling fan, the fan is easily removed with four screws and the fan guard with the cool COPPERHEAD logo simply clicks back into place on the top of the ESC. It keeps the COPPERHEAD 10 looking mean and provides an extra measure of protection. To further protect your investment, the COPPERHEAD emits audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff. You'll find a handy decal in your box that contains a reference chart for the eight alert tones, no need to Google while your enjoying your wheel time! We’ve packaged the COPPERHEAD 10 with a dozen different 4-POLE 12-SLOT sensored motor options to eliminate the guesswork in finding the right brushless power upgrade for your basher, crawler, on road vehicle, short course or monster truck. An added bonus of pairing your Copperhead with a Castle 4-Pole 12-Slot sensored motor is enabling SMARTSENSE™ TECHNOLOGY, which uses the motor’s sensors at startup to provide cog-free starts, excellent torque and low-speed drivability. Once the motor is turning, the ESC seamlessly transitions to Castle’s ultra-efficient sensorless mode with electronic timing to advance timing automatically for peak performance in all driving conditions. The all-new COPPERHEAD 10 PERFORMANCE 1/10 SCALE ESC is ideal for those who want sensored motor support, data logging, a 6A peak selectable internal BEC (5.5V or 7.5V) and Castle’s signature reliability and performance in the meanest looking ESC around! If you’re looking to transform your 1:10 scale stock vehicle from dull to dangerously fun COPPERHEAD can do it with its buttery smooth starts, CRYO-DRIVE enabled performance and up to 4S power in a compact, easy-to-install footprint. Waterproof : Yes Telemetry Capable : Yes Data Logging : Yes Auxiliary Wire : No Minimum Input Voltage : 2S Maximum Input Voltage : 4S Sensored Capable : Yes Recon G6 Certified ESC : No ROAR Certified ESC : No CRYO-DRIVE : Yes COPPERHEAD 10 ESC COMES WITH: Copperhead 10 ESC with sensor harness Copperhead decals and Audible Alert Reference Chart Coupon for free Castle Link USB Copperhead Quick Start Guide Sensor port dust cover Copperhead 10 ESC Specs: Application Guidelines: 1/10 scale vehicles weighing up to 3.4kg Input Voltage Range: 2s-4s (16.8V Max) Running Modes: SMARTSENSE™, Sensored Only and Brushed Motor Operation Brake: Proportional Reversible: Yes, but may be disabled for racing On/Off Switch: Yes, waterproof Cooling Fan: Yes, factory equipped (30mm), fully removable** and includes dual use fan guard (See Operating Use Statements) Size: 55.6 x 35.3 x 33.8mm Weight (with wires): 70.9 g Motor Connectors: 4.0mm female bullets for motor connection Items Needed for Operation: Battery Connector required, Castle 4.0mm Polarized Connectors, Traxxas® Power Connectors, or T-Plugs or XT60 connectors are recommended Operating environment: Waterproof design for all weather conditions. Although COPPERHEAD 10 is waterproof, it is not intended for operation while completely submerged in liquid. Always rinse the ESC and motor with clean water after exposure to corrosives or dirt. While the motor and controller may be waterproof, we suggest users confirm that the rest of their vehicle, including the batteries, servos, radio and chassis are also waterproof before exposing them to liquids of any kind. **The cooling fan must be removed prior to driving in wet conditions. It is not waterproof. Programmability: Fully programmable Castle feature set using Castle Link USB adapter (coupon for free link included in package) and freely downloadable Castle Link Windows software, or the Castle Link App and a B-LINK Bluetooth Adapter (sold separately). Telemetry Link Capable: Yes, with Castle Creations Telemetry Link for S.BUS2 and Futaba T4PX, T7PX and T7PXR Transmitters.

1.995,-

2.295,-

KJØP
-13%
Hovedbilde Castle Creations 4mm Bullet Connector 16G/13G 75A (3)
Castle Creations 4mm Bullet Connector 16G/13G 75A (3)
These are the 4mm High Current Bullet Connectors from Castle Creations. FEATURES: Gold plated           Fits wire diameter up to 4mm           Use 16 gauge to 13 gauge wires           Up to 75A current INCLUDES: Three sets of bullet connectors REQUIRES: Solder and soldering iron. SPECS:    Length: .66" (17mm)           Diameter: .15" (4mm) inside (where the wire is soldered to)           Diameter: .19" (5mm) outside

149,-

KJØP
Hovedbilde Traxxas 6780 Differential Center HD Complete Hovedbilde Traxxas 6780 Differential Center HD Complete
Traxxas 6780 Differential Center HD Complete
Traxxas introduces a new heavy-duty center differential for 1/10 scale 4X4 trucks. Like the Torque-Biasing Center Drive found in the X-Maxx and E-Revo, the heavy-duty center differential replaces the stock slipper clutch to absorb shocks and improve driveline durability in high-power applications. The center differential distributes power to all four wheels for extreme 3-cell LiPo acceleration and consistent, hard launches. • Aluminum housing with hardened steel output gears • Steel spur gear • Replaces stock slipper clutch • Absorbs driveline shocks • Compatible with 3S LiPo power • Distributes power to all four wheels • Resists ballooning of unloaded wheels • Fits high or low-CG 1/10 chassis

859,-

899,-

KJØP
-4%
Hovedbilde Castle Creation Mamba XLX2 8S 33,6V ESC, 2028-1100KV ...
Castle Creation Mamba XLX2 8S 33,6V ESC, 2028-1100KV ...
Castle Mamba XLX2, 8S, 33.6V ESC with 2028-1100KV Sensored Motor Combo Introducing the Mamba XLX2, an ESC that will redefine the limits of 1/5th scale R/C! Engineered from the ground up, the Mamba XLX2 is packed with a potent combination of hardware and software advancements, sensored performance, CRYO-DRIVE™ and waterproof design that will set a new standard for high performance power systems. The Mamba XL family is well known for its extreme performance capabilities. The XLX2 pays homage to the legacy of its predecessors and exceeds their performance on all levels. The Mamba XLX2 and 2028-1100kv combo is designed for the most extreme and demanding RC applications. The massive motor and high power ESC are capable of pushing vehicles and drivers to their limits and beyond. This is the perfect combo for vehicles weighing up to 30 lbs and up to 8s LiPo. MAMBA XLX2 FEATURES: Input Voltage Range 3S-8S LiPo (33.6v max) Sensorless, Sensored, SmartSense™ and Brushed Running Modes Powerful Integrated 20A Peak Adjustable BEC (5.25V-8.0V) CRYO-DRIVE™ Technology minimizes the amount of time the ESC’s electrical components spend generating heat, resulting in improved thermal performance during partial throttle operation where the majority of driving occurs ESC is housed in a rugged CNC aluminum case and potted in waterproof epoxy to protect the electronics and promote efficient heat transfer Premium forged heatsink with elliptical fins for superior air flow and increased heat dissipation Oversized factory equipped thermally controlled 50MM cooling fan Compatible with S.BUS2 Telemetry Link and Futaba T4PX, T7PX and T7PXR transmitters Mounting holes located in bottom of aluminum case for affixing to your vehicle Waterproof design for all weather conditions Data logging capability to capture and record performance data from your vehicle Auxiliary wire functionality for "on-the-fly" adjustments using your transmitter Audible alerts for easy diagnosis of common issues such as motor-over-temperature and low-voltage cutoff Convenient transmitter programming for six common adjustable settings including cutoff voltage and drag brake Easily tune and update ESC with USB and Bluetooth™ programming options Castle Link USB programming kit (coupon included with purchase) Optional smartphone-based programming with the B-LINK™ Bluetooth Adapter (sold separately and Castle Link all available on Google Play or Apple App Store) MOTOR FEATURES: 4-POLE 12-SLOT sensored design that boasts exceptional efficiency and produces less heat Proprietary stator winding produces low internal resistance for a cooler running motor Dual sensor ports to ensure optimal installation in your large-scale vehicle Oversized NMB bearings and vibration dampening system ensure the longest possible bearing life High-strength, high-temperature grade neodymium sintered magnets combined with high-strength Kevlar wrap ensures the integrity of the rotor is not compromised during harsh running conditions and high RPMs Specification: Application: Car Motor Type: Brushless kV Value: 1100 kV Motor diameter: 57 mm Motor length: 113,2 mm Shaft length: 30 mm Shaft Diameter: 8 mm Weight: 1250 gram Max Rev.: 45000 rpm Connector: 8mm Bullet Max voltage: 33.6 V

6.395,-

7.995,-

KJØP
-20%
Hovedbilde Traxxas 7759G Washers motor mount aluminum (green ...
Traxxas 7759G Washers motor mount aluminum (green ...
Traxxas 7759G Washers motor mount aluminum (green anodized) (4)/ 4x18mm BCS (4)

79,-

89,-

KJØP
-11%
Hovedbilde Traxxas 7831G Suspension Arm Lower Left F/R HD Green ...
Traxxas 7831G Suspension Arm Lower Left F/R HD Green ...
Traxxas 7831G - HD Suspension arm Green, lower (left, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

145,-

KJØP
Hovedbilde Traxxas 7830G Suspension Arm Lower Right F/R HD Green ... Hovedbilde Traxxas 7830G Suspension Arm Lower Right F/R HD Green ...
Traxxas 7830G Suspension Arm Lower Right F/R HD Green ...
Traxxas 7830G - HD Suspension arm Green, lower (right, front or rear), heavy duty (1) Designed for the Extreme New heavy-duty X-Maxx suspension arms use our toughest composite material. Whether you’re sending it at the skate park, or launching from a ramp, these arms are built with just the right amount of flex to resist breakage. These popular accessories stand up to the most punishing drivers and even cold weather. Six colors available! Black, Blue, Red, Orange, Green & White

145,-

KJØP
Hovedbilde Traxxas 6496X Pinion Gear 24T 1.0M Pitch for 5mm shaft
Traxxas 6496X Pinion Gear 24T 1.0M Pitch for 5mm shaft
Gear, 24-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)

89,-

KJØP
Hovedbilde Traxxas 6447R Spur gear, 46-tooth, steel (wide-face, ...
Traxxas 6447R Spur gear, 46-tooth, steel (wide-face, ...
Spur gear, 46-tooth, steel (wide-face, 1.0 metric pitch)

219,-

KJØP

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png