Hopp til innhold
Hjem / Tilbud

Tilbud

Hovedbilde Gens Ace Bashing G-Tech 3s 5000mAh - 60C - XT90
Gens Ace Bashing G-Tech 3s 5000mAh - 60C - XT90
Art.nr: B-60C-5000-3S1P-Bashing-XT90-G
Copied
Produktinformasjon 3s 5000mAh - 60C - Gens Ace Bashing G-Tech XT90 er et godt valg til radiostyrte biler som krever 3s LiPo. Batteriet har dimensjonene 135x43x26mm og veier 343g. XH-type balanseringskontakt som er kompatibel med de fleste LiPo-ladere.   G-Tech Har man G-tech lader og batteri, vil lader kommuniserer med batteriet via balanseringspluggen. Her får laderen informasjon om batteriet som celleantall, spenning, kapasitet og helse. Laderene velger da korrekt ladeprogram og ladestyrke automatisk. Ladestyrke kan endres manuelt etter oppstart ved behov. G-Tech kontakten er kompatibel med vanlige LiPo-ladere med XH-balanseringsport så man kan lade dette batteriet på samme måte som vanlige LiPo-batterier. Spesifikasjoner: Kapasitet: 5000mAh Spenning: 3S 11.1V Vekt: 343g Størrelse: 135x43x26mm Strømplugg: XT90 Balanseringsplugg G-Tech   Gens ace lipo 5000mah 3S1P 60C battery Suited to the following models:1/8, 1/10 RC car model, such as 1/8 SLEDGE. Fast charging by 5C is available.

629,-

679,-

KJØP
-7%
Hovedbilde Tamiya 19400896 Metal Parts Bag B For 56323
Tamiya 19400896 Metal Parts Bag B For 56323
Art.nr: 19400896
Copied
Metal Parts Bag B For 56323

529,-

549,-

KJØP
-4%
Hovedbilde Tamiya 58384 Subaru Brat 2WD Truck Kit no ESC
Tamiya 58384 Subaru Brat 2WD Truck Kit no ESC
Art.nr: 58384
Copied
This is the electric powered, radio controlled 1/10 scale Tamiya Subaru Brat Truck Kit. FEATURES:           Chassis:  ABS resin space Black in color (production kit does not have chrome chassis)           Drive:    Two wheel rear drive           Motor:    Mabuchi RS540SH stock motor with attached bullet connectors           Shocks:   Horizontal Front Spring Damper, Rear Oil Dampers           Bodies:   Two, one plastic similar to the original Tamiya Brat                       and one modern polycarbonate           Gearbox:  Four gear diff (pinion drives spur, spur drives drive gear,                       drive gear drives diff gear) ball bearing equipped           Differential:  Plastic bevel gear type           Transmission:  Single speed           Speed Control: Not incl.           Pinion Gears:  16 tooth, 18 tooth and 19 tooth included           Wheels:        White           Tires:         Semi-pneumatic, deep treaded tires           Bumpers:       Front plastic           Suspension:    Four wheel independent           Camber Tie Rods:   Non adjustable           Steering Tie Rods: Adjustable           Steering:    Steering rods attach to servo saver and knuckle arms           Servo Saver: Included           Driveshafts: Re-designed dog bone style with rubber boots INCLUDES: Tamiya Subaru Brat with shocks, two bodies, 540 size motor, semi-pneumatic tires, white wheels, front bumper, 16, 18, and 19 tooth pinion gears, 49, 50 and 52 tooth spur gears, decals and building instructions. REQUIRES:           Radio: 2-channel radio with one standard servo and esc.           Battery: 6 flat pack with standard connector.           Charger: AC/DC Timed or Peak for 6-cell battery            Misc. Items: Paint for body and building and track equipment SPECS:       CHASSIS-            Length:    17.8"  (453mm)            Width:      8.7"  (220mm)            Height:     6.9"  (175mm)            Weight:    4.1lbs (1840g) BODY-            Length:    16.5"  (420mm)            Width:      7.1"  (180mm)            Height:     4.3"  (109mm)

3.495,-

3.595,-

Ikke på lager
-3%
Hovedbilde Tamiya 54000 M-Chassis Aluminum Damper Set (4)
Tamiya 54000 M-Chassis Aluminum Damper Set (4)
Art.nr: 54000
Copied
Usable with: M-03 & M-04 & M-05 Size of damper cylinders and piston rods are optimized for use with M-Chassis. Damper cylinders have black coating on inner surface with realizes ultra-smooth movement.

729,-

799,-

KJØP
-9%
Hovedbilde Tamiya 58646 1/18 Konghead 6x6 G6-01 Monster Truck Kit Hovedbilde Tamiya 58646 1/18 Konghead 6x6 G6-01 Monster Truck Kit
Tamiya 58646 1/18 Konghead 6x6 G6-01 Monster Truck Kit
Art.nr: 58646
Copied
Primed to pound pavement – and all other types of terrain! The 1/18 Konghead 6x6 G6-01 Kit comes with a game-changing 6WD chassis that makes it a superstar at extreme off-roading! A powerful gear-driven setup makes the Konghead able to conquer slope inclines of up to 40°. The clear polycarbonate body is inspired by the best-selling Bullhead, while a vast assortment of metal-plated parts add dynamic detail to a dynamite model! GF-01 plastic monocoque chassis is compatible with many hop-up and spare parts. Six-wheel drive. Front-center mounted motor. Clear polycarbonate body is inspired by the popular Bullhead monster truck. Features metal-plated air cleaners, exhausts and more. Friction shocks. Standard build is front wheel steering. 4WS can be used with a 4WS-compatible transmitter and RC equipment (sold separately). Six-wheel double wishbone suspension. Tires, wheels and decals included.   This is the Tamiya 1/18 scale Radio Controlled, Electric Powered Konghead 6x6 Off-Road Semi Truck Kit.     FEATURES Chassis: GF-01 plastic monocoque, compatible with many GF-01 chassis Hop Up Option and spare parts Drive: Six wheel Motor: 540 brush equipped, front-center mounted Body: Clear polycarbonate, inspired by Tamiya's Bullhead monster truck, metal plated air cleaners, exhaust and more Suspension: Six wheel double wishbone Shocks: Friction, not oil-filled Steering: Standard build is front wheel steering, may be with four wheel steering, separately sold 4WS function transmitter and RC equipment required     INCLUDES 1/18 scale Konghead 6x6 Off-Road Semi Truck Kit, Clear Body, Decals, Tires, Wheels Instruction Manual     REQUIREMENTS Radio: 2-channel with high-torque steering servo ESC: Tamiya TEU-302BK recommended Battery: 7.2V 6-cell stick pack with Standard connector Battery Charger: Compatible with selected battery Polycarbonate safe spray or brush-on paint Building and track equipment     SPECIFICATIONS Length: 16.5" (420mm) Width: 10.6" (270mm) Height: 11" (280mm)

2.495,-

2.895,-

KJØP
-14%
Hovedbilde Kyosho 32526GM Mini-Z 4X4 MX-01 Land-Rover Defender ... Hovedbilde Kyosho 32526GM Mini-Z 4X4 MX-01 Land-Rover Defender ...
Kyosho 32526GM Mini-Z 4X4 MX-01 Land-Rover Defender ...
Art.nr: 32526GM
Copied
Mini-Z 4X4 MX-01 Land-Rover Defender Autobiography G-BK (KT531P) The combination of the highly-detailed body and a completely new 4x4 chassis design opens up new levels of performance, well beyond anything RC enthusiasts have ever seen from a mini crawler. In 2019 the world's most popular mini RC series, known as the Kyosho MINI-Z, celebrated more than 20 years of unmatched performance and scale realism in the hobby-grade RC category. The continuous pursuit of performance and evolution has led to the creation of a completely-new ‘MINI-Z 4x4’ design that delivers an all-new driving experience for RC fans of all stripes, with superior overall design, driving performance and high-quality injection-molded scale body construction. A significant feature of the MINI-Z 4x4 series is the greater emphasis of body detail and quality of finish that even surpasses existing benchmarks set by the MINI-Z. The body is also molded with thicker material to better resist crash damage from operation in rough terrain. Incorporating the same ladder- style frame of real 4WD vehicles, the MINI-Z 4x4 boasts a 3-link rigid axle suspension combining what would normally be two upper links into a single upper A-arm to deliver maximum suspension movement. A specially designed high-torque steering servo enables this machine to throw its elbows around in the hard terrain for excellent performance in the toughest rock-crawler conditions. The high-torque 130-size motor brings out the beast in the MINI-Z 4x4, specially geared to run well in the low to medium speed ranges common in crawling. Designed to balance exquisite style, scale detail and superior driving performance, all the MINI-Z 4x4 needs is 8 x AAA alkaline batteries (sold separately). Enjoy driving under any conditions, from normal driving to rock crawling while appreciating the stunning visual appearance. The Kyosho Mini-Z 4x4 is the only mini crawler that delivers a full range of crawling performance in a smaller package.   TECHNICAL DATA ■Length 185.8mm ■Width 83mm ■Height 104.0mm ■Chassis Type MX-01 ■Wheel Base 110mm ■Tread F/R:72.7mm ■Weight 248.6g (excl. battery) ■Motor/Engine 130 Class ■Gear Ratio 55.44：1/46.20：1/39.60：1                     34.65：1/30.80：1/27.72：1 　 ■Front Tire Diameter Φ42.0mm ■Rear Tire Diameter Φ42.0mm ■Front Tire Width 14.3mm ■Rear Tire Width 14.3mm ■Battery 4 x AAA alkaline ■Transmitter Syncro KT-531P ■Speed Approx. 3.3km/h〜6.6km/h  (Pinion gears 10T〜 20T)  ■Running Time Approx. 60 mins   KIT CONTENT ●Complete chassis with built-in electronics. ●Factory-painted body complete with many fine details ●KT-531P 2.4GHz transmitter ●Pinion gear set（10T、12T、14T、16T、18T、20T） ●3 types of pinion gear spacers   REQUIREMENT TO RUN ●4 x AAA batteries for the transmitter ●4 x AAA batteries for chassis （Alkaline or NiMH）   The MINI-Z 4x4 adopts similar mechanism commonly used in 1:10-scale off-road models in its small chassis. In addition to its crawling performance, the highly-detailed body is one of the key features of this model. The long-awaited Land Rover Defender 90 Heritage Edition and Autobiography Edition are finally added to the MINI-Z 4x4 line. Born in 1948 and in continuous production through to 2016, the Autobiography Limited Edition is perhaps the most luxurious model in the Defender series. The engine also has a higher output than the standard specifications.   Features - Injection molded bodies enhanced with accessory parts recreate a level of detail in the MINI-Z 4x4 series that surpasses all MINI-Z bodies that have come before. - Fully pre-painted body looks like a luxury diecast car replica. The thicker body material also provides superior durability. - Original cut design of the headlight lenses, indicators and tail lights are reproduced as clear parts so you can incorporate the optional LED lights to enjoy an ultra-realistic car experience. - A newly-designed one-touch body mounting system is used instead of the mounts commonly used on all previous Mini-Z cars and trucks. The new system uses spring-wire retainers to quickly and easily install and remove the body. - The same ladder frame and multi-link rigid-axle suspension commonly used in popular 1:10-scale off-road models, is condensed into Mini-Z size for the most articulation and performance available in any mini RC truck. - The 4WD system transmits drive force to the wheels from the main gear unit in the center of the chassis through front and rear center shafts. The wheelbase can be set to either 110mm or 120mm by adjusting the length of the spacers on the upper arms. Note the DEFENDER uses a 110mm setting. - The newly designed shock absorbers feature 360-degree spring retainers, which means they can't be lost on the trail and the springs are more likely to re-seat when the suspension settles after hard impacts or operating at the extreme limits of the suspension. The spring retainers simply cannot come loose. - The front axle features ideal Ackermann geometry. Combined with the advanced design of the axle housing and the other steering components, This model features the tightest turning radius in Mini-Z history. It means the Mini-Z 4x4 has exceptional handling capability for anything ranging from casual driving to hard-core crawling. - Tires and wheels that are specific to each model are a major focus of the Mini-Z 4x4. This model features a scale reproduction of Toyo Tire's export brand "Nitto Ridge Grappler" tires mounted on custom wheels. - The gearbox features molded covers and includes 6 pinion gears that allow adjustment from ultra-low gearing for steep terrain, through to high-speed gearing for smooth running on flat roads. In addition, the need for annoying backlash adjustments has been negated with the special spacer mounted on the outside of the motor. - The Mini-Z 4x4 features a specially-designed high-torque motor that is unique in the Mini-Z World. It's optimized for maximum torque, and it develops more power at lower speeds. - The on-board electronics are also unique to the Mini-Z 4x4, with special features that improve the crawling experience. The accessory ports on top of the board allow an optional gyro (MZW431) and an optional LED light set (MZW429R) to be easily plugged in to enhance performance and realism. - The component steering servo features its own casing to allow enhanced performance, and it connects to the receiver/ESC with an independent connector.

3.295,-

3.795,-

KJØP
-13%
Hovedbilde Kyosho 1/10 Vintage Series Ultima Buggy Kit Hovedbilde Kyosho 1/10 Vintage Series Ultima Buggy Kit
Kyosho 1/10 Vintage Series Ultima Buggy Kit
Art.nr: 30625B
Copied
The sensation is set to shock the world again! ULTIMA becomes the 8th model in the Kyosho Vintage Series The impact of the ULTIMA’s dominant 1-2 finish in the 2WD class at the 2nd Electric Off Road World Championship in England in 1987 was felt across the RC car scene. Now Kyosho’s famous ULTIMA turns back the clock with its return as the 8th model in the Kyosho Vintage Series! First released in 1986, the 2WD ULTIMA channeled racing tech from the OPTIMA into an electric racing buggy whirlwind that swept across the world. Consistent with the Vintage Series, the 2019 ULTIMA version has evolved in design and build to satisfy performance standards for modern R/C racing circuits and power sources. For example, the monocoque frame is made from aircraft grade A60601T6 aluminum alloy and multi-pin block pattern rear tires deliver optimal performance on modern off-road tracks. Full ball bearing specs minimize drive loss and combine with high-durability sintered alloy metal gears, slipper clutch and motor guard to protect the drive system while crash-resistant resin rear wing is also included. Relive the nostalgia of the ULTIMA’s glory with the 2019 version that has evolved into a modern-day racing machine that lets you drive like a world champion.       ●ULTIMA has been faithfully recreated, with component upgrades for compatibility with modern power sources. ●Polycarbonate body with driver cockpit recreates the style and atmosphere of the original ULTIMA. ●Full ball bearing specifications (14) ●Equipped with battery guard that prevents battery short circuit during a crash.   Kit Contents  Pre-assembled kit (gear box is pre-assembled) Polycarbonate clear body Decals Chassis parts L type hexagonal wrench Cross wrench Shock wrench Grease Required for operation  2ch 1 servo R/C system for cars 540 class motor ESC compatible with motor used Battery for chassis compatible with ESC used Battery charger Paint for polycarbonate body Batteries for transmitter Tools (1.5, 2, 2.5mm hexagonal wrench driver) Technical data Length : 370mm Width : 244mm Height : 106mm Ground Clearance : 20mm Wheelbase : 260-263mm Tread (F/R) : 218mm/215mm Tire(F/R) : Φ82×20mm / Φ82×36mm Gear Ratio : 8.64:1 Weight : 1,500g (approx.) Motor : 540-type (sold separately)

4.795,-

4.995,-

KJØP
-4%
Hovedbilde Traxxas 9014-GRN Body Stampede 4x4 VXL Green Clipless
Traxxas 9014-GRN Body Stampede 4x4 VXL Green Clipless
Art.nr: TRX 9014-GRN
Copied
Traxxas 9014-GRN Body, Stampede® 4X4 VXL, green (painted, decals applied) (assembled with front & rear body mounts and rear body support for clipless mounting) Is it time to upgrade your Stampede® 4X4 VXL with an all-new look? These tough polycarbonate bodies feature the hottest ProGraphix® paint with pre-applied decals. Stampede 4X4 bodies come fully-assembled and ready to mount with pre-installed body mounts, roof skid, rear body support, and tailgate protector. Replacement part for these models: Stampede® 4X4 VXL (Clipless)

769,-

799,-

KJØP
-4%
Hovedbilde Traxxas 6762X Body Stampede 4x4 ProGraphics (for ...
Traxxas 6762X Body Stampede 4x4 ProGraphics (for ...
Art.nr: TRX 6762X
Copied
Traxxas 6762X Body, Stampede® 4X4 Brushless, ProGraphix® (graphics are printed, requires paint & final color application)/ decal sheet From mild to wild, choose your own colors to personalize your clipless Stampede 4X4 body. The detailed graphics are fully painted, but the rest of the body is clear, so you can choose your own main body color. Simply grab a can of Hobbynox paint to spray the final color. It's easy for anyone to get instant, professional results. Traxxas ProGraphix bodies come completely trimmed for easy installation. A protective overspray film is applied to the body for convenience. Clipless body frame, body reinforcements, and skid plates sold separately. Accessory part for these models: Stampede® 4X4 Brushless (clipless) Stampede® 4X4 VXL (clipless)  

539,-

559,-

KJØP
-4%
Viser 559 til 567 (av 5625 produkter)

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png