Hopp til innhold
Hjem / Tilbud

Tilbud

Hovedbilde Tamiya 81042 Paint Mixing Jar 46 W/Measure
Tamiya 81042 Paint Mixing Jar 46 W/Measure
Art.nr: 81042
Copied
Use this 46cc glass bottle to store your paint. Its lid closely snugly, letting you keep your paints safely for long periods, and can be used with acrylic, enamel and lacquer paints. ★Capacity: 46cc ★Height: 76mm, outer diameter: 40mm.

49,-

59,-

KJØP
-17%
Hovedbilde RC4WD 0080 King Off-Road Racing Shocks for Traxxas ... Hovedbilde RC4WD 0080 King Off-Road Racing Shocks for Traxxas ...
RC4WD 0080 King Off-Road Racing Shocks for Traxxas ...
Art.nr: D0080
Copied
RC4WD King Off-Road Racing Shocks for Traxxas TRX-4 (90mm)       These are the all new Licensed Racing Shocks to hit the market and are officially Licensed from King Off-Road Shocks. These new shocks feature a completely new design from the ground up and are built and ready to handle the rocks. Your scale build will never be the same once you bolt up a set of these awesome looking shocks!       Specifications: Machined Billet Aluminum King Laser etched on top cap and retainer ring Dual Spring Design X-ring Gaskets Titanium Nitride Coated Shock Shafts Hole to Hole (Compressed): 2.67in / 68mm Hole to Hole (Uncompressed): 3.54in /90mm Overall Length: 3.92in / 99.7mm Travel Length: 0.86in / 22.0mm Shock Body OD: 0.57in / 14.7mm Shaft OD: 0.15in / 3.9mm Each Weigh: 0.67oz / 19.2g                 Shown installed on Traxxas TRX-4 '79 Bronco Ranger XLT with Chubby Mini 3 TON Scale Jack Stands (Z-S0731) for example (Not included)           What's Included: 2x RC4WD King Off-Road Racing Shocks for Traxxas TRX-4 (90mm) 2x 2.5mm X-ring collar 2x 2 mm Black Spacers with M3 Hole (Z-S0600) 4x 2.6mm Black Spacers with M2.9 Hole 1x King Decal Sheet Instruction Manual: Click here to download.     Optional Parts: Spring Kit 90mm King Scale Shock Spring Assortment (Z-S1119)   Notes: Designed with Titanium Nitride (TiN) shock shafts for long term wearability. X-ring Gaskets provide double the oil seals in the shock cartridge. Ball ends are a direct fit for Traxxas TRX-4 axle and shock hoop mounts. Shocks do not come with oil. It is highly recommended to build the shocks with silicone shock oil and thick shock grease on the x-rings for maximum performance. Additional X-ring spacers are included to fine tune the shocks. A 2.7mm spacer is installed in the shocks providing maximum sealing compression. The 2.5mm spacer can be used allowing the shaft to move easier through the X-rings. Fits Traxxas TRX-4 Land Rover Defender Fits Traxxas TRX-4 '79 Bronco Ranger XLT Fits Traxxas TRX-4 Sport Kit Fits Traxxas TRX-4 Sport Fits Traxxas TRX-4 Crawler Kit Fits Traxxas TRX-4 Mercedes-Benz G 500 4x4 Fits Traxxas TRX-4 Chevrolet K5 Blazer Fits Traxxas TRX-6 Mercedes-Benz G 63 6x6 When installing on Axial SCX10-3 please use a 5mm Black Spacer with M3 Hole (Z-S0821) on the shock tower.   King Off-Road is a registered trademark of the King Off-Road Shock company. The King Off-Road logo is property of King Off-Road Shocks and used under license by RC4WD.

549,-

799,-

KJØP
-31%
Hovedbilde RC4WD 0025 King Off-Road Racing Shocks (70mm) Hovedbilde RC4WD 0025 King Off-Road Racing Shocks (70mm)
RC4WD 0025 King Off-Road Racing Shocks (70mm)
Art.nr: D0025
Copied
RC4WD King Off-Road Racing Shocks (70mm)     These are officially licensed from King Off-Road Shocks. These new shocks feature a completely new design from the ground up and are built to handle rough and rocky terrains. Bolt up and upgrade your scale build with a new set of these realistic-looking shocks!     Specifications: Machined Billet Aluminum King Laser Etched on Top Cap and Retainer Ring Dual Spring Design X-ring Gaskets Titanium Nitride Coated Shock Shafts Hole to Hole (Compressed): 2.24in / 57mm Hole to Hole (Uncompressed): 2.75in /70mm Overall Length: 3.14in / 80mm Travel Length: 0.51in / 13.0mm Shock Body OD: 0.57in / 14.6mm Shaft OD: 0.15in / 3.9mm Each Shock Weighs: 0.61oz / 17.5g             Shown installed on RC4WD Trail Finder 2 RTR w/Chevrolet Blazer Body Set (Midnight Edition) (Z-RTR0068) with Chubby Mini 3 TON Scale Jack Stands (Z-S0731) for example (Not Included)     What's Included: 2x RC4WD King Off-Road Racing Shocks (80mm) 2x White Shaft Guides 4x 3 x 5.5 x 2.7mm Black Spaces 2x 3 x 5.5 x 2mm Black Spaces 1x King Decal Sheet   Optional Lengths: RC4WD King Off-Road Racing Shocks (80mm) (Z-D0006) RC4WD King Off-Road Racing Shocks for Traxxas TRX-4 (90mm) (Z-D0080)   Notes: Designed with Titanium Nitride (TiN) shock shafts for long term wearability. X-ring Gaskets provide double the oil seals in the shock cartridge. Ball ends are a direct fit for Traxxas TRX-4 axle and shock hoop mounts. Shocks do not come with oil. It is highly recommended to build the shocks with silicone shock oil and thick shock grease on the x-rings for maximum performance. Additional X-ring spacers are included to fine tune the shocks. A 2.7mm spacer is installed in the shocks providing maximum sealing compression. The 2.5mm spacer can be used allowing the shaft to move easier through the X-rings. Fits Traxxas TRX-4 Land Rover Defender Fits Traxxas TRX-4 '79 Bronco Ranger XLT Fits Traxxas TRX-4 Sport Kit Fits Traxxas TRX-4 Sport Fits Traxxas TRX-4 Crawler Kit Fits Traxxas TRX-4 Mercedes-Benz G 500 4x4 Fits Traxxas TRX-4 Chevrolet K5 Blazer Fits Traxxas TRX-6 Mercedes-Benz G 63 6x6 Fits RC4WD Gelande II RTR W/ 2015 Land Rover Defender D90 Body Set (Autobiography Limited Edition) (Z-RTR0043) Fits RC4WD Gelande II RTR W/ 2015 Land Rover Defender D90 Body Set (Heritage Edition) (Z-RTR0044) Fits RC4WD Gelande II RTR Truck w/Cruiser Body Set (Red) (Z-RTR0047) Fits RC4WD Gelande II Truck Kit w/Cruiser Body Set (Z-K0051) Fits RC4WD Gelande II Truck Kit 1/10 Chassis Kit (Z-K0060) Fits RC4WD Gelande II Kit w/ 2015 Land Rover Defender D90 Hard Body Set (Z-K0064) When installing on Axial SCX10-3 please use a 5mm Black Spacer with M3 Hole (Z-S0821) on the shock tower.   King Off-Road is a registered trademark of the King Off-Road Shock company. The King Off-Road logo is property of King Off-Road Shocks and used under license by RC4WD.

549,-

799,-

KJØP
-31%
Hovedbilde RC4WD 0006 King Off-Road Racing Shocks (80mm) Hovedbilde RC4WD 0006 King Off-Road Racing Shocks (80mm)
RC4WD 0006 King Off-Road Racing Shocks (80mm)
Art.nr: D0006
Copied
RC4WD King Off-Road Racing Shocks (80mm)   These are officially licensed from King Off-Road Shocks. These new shocks feature a completely new design from the ground up and are built to handle rough and rocky terrains. Bolt up and upgrade your scale build with a new set of these realistic-looking shocks!     Specifications: Machined Billet Aluminum King Laser Etched on Top Cap and Retainer Ring Dual Spring Design X-ring Gaskets Titanium Nitride Coated Shock Shafts Hole to Hole (Compressed): 2.44in / 62mm Hole to Hole (Uncompressed): 3.14in /80mm Overall Length: 3.54in / 90mm Travel Length: 0.70in / 18.0mm Shock Body OD: 0.57in / 14.6mm Shaft OD: 0.15in / 3.9mm Each Shock Weighs: 0.65oz / 18.7g             Shown installed on RC4WD Gelande II RTR W/ 2015 Land Rover Defender D90 Body Set with Chubby Mini 3 TON Scale Jack Stands (Z-S0731) for example (Not Included)       What's Included: 2x RC4WD King Off-Road Racing Shocks (80mm) 2x White Shaft Guides 4x 3 x 5.5 x 2.7mm Black Spaces 2x 3 x 5.5 x 2mm Black Spaces 1x King Decal Sheet   Optional Lengths: RC4WD King Off-Road Racing Shocks (70mm) (Z-D0025) RC4WD King Off-Road Racing Shocks for Traxxas TRX-4 (90mm) (Z-D0080)   Notes: Designed with Titanium Nitride (TiN) shock shafts for long term wearability. X-ring Gaskets provide double the oil seals in the shock cartridge. Ball ends are a direct fit for Traxxas TRX-4 axle and shock hoop mounts. Shocks do not come with oil. It is highly recommended to build the shocks with silicone shock oil and thick shock grease on the x-rings for maximum performance. Additional X-ring spacers are included to fine tune the shocks. A 2.7mm spacer is installed in the shocks providing maximum sealing compression. The 2.5mm spacer can be used allowing the shaft to move easier through the X-rings. Fits Traxxas TRX-4 Land Rover Defender Fits Traxxas TRX-4 '79 Bronco Ranger XLT Fits Traxxas TRX-4 Sport Kit Fits Traxxas TRX-4 Sport Fits Traxxas TRX-4 Crawler Kit Fits Traxxas TRX-4 Mercedes-Benz G 500 4x4 Fits Traxxas TRX-4 Chevrolet K5 Blazer Fits Traxxas TRX-6 Mercedes-Benz G 63 6x6 Fits RC4WD Gelande II RTR W/ 2015 Land Rover Defender D90 Body Set (Autobiography Limited Edition) (Z-RTR0043) Fits RC4WD Gelande II RTR W/ 2015 Land Rover Defender D90 Body Set (Heritage Edition) (Z-RTR0044) Fits RC4WD Gelande II RTR Truck w/Cruiser Body Set (Red) (Z-RTR0047) Fits RC4WD Gelande II Truck Kit w/Cruiser Body Set (Z-K0051) Fits RC4WD Gelande II Truck Kit 1/10 Chassis Kit (Z-K0060) Fits RC4WD Gelande II Kit w/ 2015 Land Rover Defender D90 Hard Body Set (Z-K0064) When installing on Axial SCX10-3 please use a 5mm Black Spacer with M3 Hole (Z-S0821) on the shock tower.   King Off-Road is a registered trademark of the King Off-Road Shock company. The King Off-Road logo is property of King Off-Road Shocks and used under license by RC4WD.

549,-

799,-

KJØP
-31%
Hovedbilde RC4WD E0130 Warn 1/10 Advanced Wireless ... Hovedbilde RC4WD E0130 Warn 1/10 Advanced Wireless ...
RC4WD E0130 Warn 1/10 Advanced Wireless ...
Art.nr: E0130
Copied
RC4WD Warn 1/10 Advanced Wireless Remote/Receiver Winch Controller Set     This is the all-new RC4WD Warn 1/10 Advanced Wireless Remote/Receiver Winch Controller Set. It is Officially Licensed by Warn Industries and features an On/Off switch with LED indicator, lanyard strap, and a 1:1 detailed remote design with rubber buttons for improved operation. It is exclusively available on RC4WD.com and our partnered dealers.     Specifications:   Remote Over 50ft Range Batteries Included Total Length: 2.10in / 53.5mm Total Width: 1.06in / 27mm Height: 0.59in / 15mm Weight: 0.49oz / 13.9g On/Off Switch   Receiver Small Compact Size Operating Voltage 6V to 11.1V Easy Plug and Play Instruction Included Length: 1.6in / 40.4mm Width: 1.2in / 30.2mm Height: 0.37in / 9.4mm Weight: 0.5oz / 14g   Wires Length: 6.0in / 150mm Wires Weight: 0.14oz / 4g   Lanyard Total Length: 7.24in / 184mm Weight: 0.14oz / 1.8g   Product 30 Day Warranty Designed and Manufactured by RC4WD                   Shown installed with RC4WD 6-Cell 3000mAh NIMH Battery Pack (Z-E0092) and RC4WD 1/10 Warn 9.5cti-s Winch (Z-E0119) for example (Not Included)       What's Included: 1x WARN 1/10 Wireless Remote 1x Wireless Receiver Unit 1x 6" Battery/Receiver Power Wire 1x 6" Receiver/Winch Control Wire 1x Lanyard 1x Warn Decal Sheet   Optional Parts: RC4WD 1/10 Warn 9.5cti-s Winch (Z-E0119) RC4WD 1/8 Warn Zeon 10 Winch (Z-E0069) RC4WD 1/10 Mini Warn 9.5cti Winch (Z-S1571) RC4WD 1/10 Warn 8274 Winch (Z-E0075) Wire Accessory Pack For 1/10 Winch and Controllers (9") (Z-S0999) RC4WD Carabiner with Web Strap & Keyring (Z-L0060) Y Harness with XT60 Leads (Z-E0142)   Instruction Manual: Click here to download   Notes: For Warnings, Precautions, Safety and Damage Limits: Click Here This Receiver on this product is waterproof but the Controller is not. You may be able to waterproof on your own but this will void the manufactures warranty. Tampering with this product in any way would result in voiding the warranty. Binding process can take 3-5 seconds. Some LiPo battery voltage can be higher than 11.1 volts. Please be careful and check voltage before using your battery. Use a BEC if needing to use a 3 cell LiPo. The remote comes with a 3V CR2025 button cell. Warn and the Warn name are registered trademarks of Warn Industries. The Warn logo is property of Warn Industries and used under license to RC4WD.

399,-

599,-

KJØP
-33%
Hovedbilde RC4WD S1744 Tough Armor Rear Bumper Chevy Blazer
RC4WD S1744 Tough Armor Rear Bumper Chevy Blazer
Art.nr: S1744
Copied
This is the Tough Armor Rear Bumper for the RC4WD B0092 Chevy Blazer Hard Body.   FEATURES CNC machined billet aluminum construction, black in color Fits the RC4WD Trail Finder 2 Truck Kit and the Chevy Blazer Hardbody   INCLUDES Tough Armor Rear Bumper Four M3 x 6mm Button Head Cap Screws Four M2.5 x 6mm Flat Head Cap Screws   SPECIFICATIONS Mounted Hole to Hole Width: 1.67" (42.4mm) Total Length: 2.16" (55.0mm) Total Width: 8.7" (221mm) Total Height: 0.85" (21.8mm) Weight: 3.17oz (90g)

599,-

799,-

KJØP
-25%
Hovedbilde RC4WD F0030 - 4pc Precision Metric Hex/Nut Driver Set Hovedbilde RC4WD F0030 - 4pc Precision Metric Hex/Nut Driver Set
RC4WD F0030 - 4pc Precision Metric Hex/Nut Driver Set
Art.nr: F0030
Copied
RC4WD 4pc Precision Metric Hex/Nut Driver Set Our RC4WD 4pc Precision Metric Hex/Nut Driver Set is designed to make life easier when working with miniature scale hex bolts which are often found on highly detailed wheels and parts. Get your set today! Specifications: Steel Tipped Drivers with Nylon Handles Chrome Plated Drivers for Durability Designed By RC4WD Handle Length: 2.75in / 70.0mm Total Weight: 2.20oz / 62.5g   What's Included: 1x RC4WD 1.5 Precision Metric Hex/Nut Driver 1x RC4WD 2.0 Precision Metric Hex/Nut Driver 1x RC4WD 2.5 Precision Metric Hex/Nut Driver 1x RC4WD 3.0 Precision Metric Hex/Nut Driver Notes: Fits RC4WD Miniature Scale Hex Bolts (M1.6 x 4mm) (Silver) (Z-S1124) Fits RC4WD Miniature Scale Hex Bolts (M2 x 5mm) (Silver) (Z-S0624) Fits RC4WD Miniature Scale Hex Bolts (M2.5 x 6mm) (Silver) (Z-S0663) Fits RC4WD Miniature Scale Hex Bolts (M3 x 6mm) (Silver) (Z-S0639) Fits RC4WD Hex Head Bolts

249,-

329,-

KJØP
-24%
Hovedbilde RC4WD S0588 Chubby 6 Ton Scale Jack Stands
RC4WD S0588 Chubby 6 Ton Scale Jack Stands
Art.nr: S0588
Copied
This is a pair of RC4WD Chubby 6 Ton Jack Stands for 1/10 scale Vehicles.   FEATURES Fully functional jack stands lift 1/10 scale vehicles to work on or  for display  Cast aluminum construction with powder coated finish, and chrome  plated handle   INCLUDES Two Chubby 6 Ton Jack Stands for 1/10 scale Vehicles   SPECIFICATIONS  Height: 2.87" (72.9mm) with lift section fully lowered  Width at Base: 1.75" (44.7mm)  Length at Base: 1.96" (50mm)

199,-

299,-

KJØP
-33%
Hovedbilde RC4WD S1011 1/10 Warn Hook Hovedbilde RC4WD S1011 1/10 Warn Hook
RC4WD S1011 1/10 Warn Hook
Art.nr: S1011
Copied
This is the RC4WD 1/10 scale Warn Hook.   FEATURES Cast molded metal with polished finish  Working safety latch  For use with RC4WD winches   INCLUDES 1/10 scale Warn Hook   SPECIFICATIONS  Total Length: 0.67" (17.1mm)  Total Width: 0.48" (12.2mm)

99,-

139,-

KJØP
-29%
Viser 397 til 405 (av 5625 produkter)

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png