Traxxas

-9%

Traxxas 8373 Response tires mounted on 1.9" Front Wheels (2)

Art.nr: TRX 8373

289,-

~~319,-~~

- 9%

Traxxas

Traxxas

På lager: 2

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Tires and wheels, assembled, glued (split-spoke black chrome wheels, 1.9' Response tires) (front) (2)

12mm hex.

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 9380 LED Light Set Corvette Stingray

Hovedbilde Traxxas 9380 LED Light Set Corvette Stingray

Traxxas 9380 LED Light Set Corvette Stingray

Traxxas 4-Tec 3-0 Corvette Stingray LED Light Kit Extreme Scale Details! The Traxxas 4-Tec 3.0 Corvette Stingray set the standard for replica scale detail in 1/10 RC models. With so much attention devoted to the Stingray’s beautiful clipless body, it’s only fitting to offer an LED light kit for even greater realism. The Corvette Stingray LED light kit fits into the body’s color-molded lenses for a perfect factory look and it’s fully waterproof for all-weather fun. Day or night, this LED kit completes the look of your Corvette Stingray with exacting scale detail.

299,-

Hovedbilde Traxxas 2422 Pinion Gear 22T 48P

Traxxas 2422 Pinion Gear 22T 48P

Gear, 22-T pinion (48-pitch) / with set screw

39,-

Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter

Hovedbilde Flysky FS-GT3B 2.4GHZ Transmitter

Flysky FS-GT3B 2.4GHZ Transmitter

Programmerbar 2,4 GHz-rattradio for bil eller båt. En veldig bra bil og båt radio til en gunstig pris. GT-3B er en programmerbar rattradio med tre kanaler. Radioen sender på 2,4 GHz-båndet, noe som gir en mye sikrere signaloverføring og dette eliminerer forstyrrelser. Via LCD-displayet kan du raskt stille inn radioen slik du ønsker for akkurat ditt kjøretøy og lage de avanserte innstillinger for ABS-brems, dual rate, reversering, servokontroll m.m. Radioen har 10 modellminner. Mål 315x159x99 mm. Vekt 328 g. Leveres med mottaker og bindingskontakt. Manual på Engelsk medfølger. Key Features – Model Memory – Servos NOR/REV – Steering Trim – Throttle Trim – Dual Rate – End Point – ABS Settings – EXP Settings – Trainer Port (for VRC) – CE & FCC certified Specification – Channels : 3 Channels – Model type : car/boat – RF range : 2.40-2.48GHz – Bandwidth : 500Hz – Band : 160 – RF power : less than 20DB – 2.4G system : AFHDS – Code type : GFSK – Sensitivity : 1024 – Low voltage warning : yes(less than 9V) – DSC por t: yes(3.5mm:output:PPM) – ST range : 90 – TH range : 45(F:30;B:15) – Charger port : yes – Power : 12V DC(1.5AA*8) – Weight : 328g – ANT length : 26mm – Size : 159 x 99 x 315mm – Color : black – Certificate : CE,FCC Includes : – 1 x 2.4Ghz transmitter – 1 x 2.4Ghz Receiver – 1 x Bind Plug

699,-

849,-

-18%

Hovedbilde Pro-Line 609215 Optional 82T Spur Gear Perf Trans

Pro-Line 609215 Optional 82T Spur Gear Perf Trans

This is the optional 82 Tooth Spur Gear for the Pro-Line Performance Transmission FEATURES: Nylon construction Replaces stock 86 tooth spur gear Allows gearing to be changed for different track conditions or motor configurations INCLUDES: 82 Tooth Spur Gear

68,-

Hovedbilde Traxxas 3643G Turnbuckle Complete Alu Green Camber ...

Traxxas 3643G Turnbuckle Complete Alu Green Camber ...

Camber links, front (TUBES green-anodized, 7075-T6 aluminum, stronger than titanium) (83mm) (2)/ rod ends (4)/ aluminum wrench (1) (#2579 3x15 BCS (4) required for installation)

439,-

459,-

-4%

Hovedbilde Traxxas 6511 Link Bluetooth Wireless Module TQi

Traxxas 6511 Link Bluetooth Wireless Module TQi

This is the Traxxas Link TQi Wireless Module. FEATURES For use with the Traxxas Link app and TQi radio system Compatible with iPhone (4S or later) iPad (3rd gen and later) iPod touch (5th gen and later) iPad mini Allows driver to view real time telemetry with optional sensors (sensors not included) Compatible with Android 4.4 and up or Apple iOS 4.3 and later platforms INCLUDES Traxxas Link TQi Wireless Module 1.5mm Hex Wrench 1.5x5mm Hex Head Screw SPECIFICATIONS Dimensions: 1.2 x 1.8 x 0.42" (31.5 x 46.8 x 10.8mm) Weight: 0.26oz (7.5g)

479,-

529,-

-9%

Hovedbilde Traxxas 7446 Spring White GTR XX-Long

Traxxas 7446 Spring White GTR XX-Long

This is a pair of XX-Long Shock Springs for the Traxxas GTR XX-Long Shocks. FEATURES: Steel construction, white in color 0.874 (black) compression rating INCLUDES: Two XX-Long Shock Springs SPECS: Length: 2.2" (57mm) Wire Diameter: 0.059" (1.5mm)

59,-

Hovedbilde Traxxas 7461X Shocks GTR Long Hard Anodized (2)

Traxxas 7461X Shocks GTR Long Hard Anodized (2)

This is a pair of Long Traxxas GTR Shocks. FEATURES: Hard anodized PTFE aluminum bodies TiN coated shafts INCLUDES: Two Long Traxxas GTR Shocks Bottle of Silicone Shock Oil REQUIRES: Springs of modeler's choice SPECS: Length: 3.3" (84mm) from upper and lower mounting hole centers Fjærer som passer. TRX 7444

459,-

489,-

-6%

Hovedbilde Traxxas 5539 Turnbuckle Camber Links 58mm (2)

Traxxas 5539 Turnbuckle Camber Links 58mm (2)

These are the 58mm Turnbuckle Camber Links for the Traxxas Nitro Jato Stadium Truck and Slash 4x4. FEATURES: Metal and Nylon Construction Silver and Black in Color Assembled w/Rod Ends Can be Used on Front or Rear INCLUDES: Two 58mm Threaded Rods Four 3mm Ball Ends Four 3mm Hollow Balls REQUIRES: Assembly onto Vehicle

95,-

Hovedbilde Dusty Motors 0051 Slash 4×4/Rally LCG Chassis ...

Dusty Motors 0051 Slash 4×4/Rally LCG Chassis ...

Fits: Traxxas Slash 4x4 with LCG chassis and 1/10 Rally only. Scale: 1/10 Color: Black This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one. DMC 0051 TRX0051

379,-

Hovedbilde Traxxas 6845G Drag Link Alu Green

Traxxas 6845G Drag Link Alu Green

Drag link, machined 6061-T6 aluminum (red-anodized) This ultra-rigid aluminum piece provide added stability and durability for drivers seeking the ultimate in control from their Slash, Stampede, or Rustler 4X4 model.

119,-

129,-

-8%

Hovedbilde Traxxas 6845A Drag Link Alu Blue

Traxxas 6845A Drag Link Alu Blue

Drag link, machined 6061-T6 aluminum (blue-anodized)

119,-

129,-

-8%

Hovedbilde Traxxas 3461 Motor Velineon 540XL Brushless

Traxxas 3461 Motor Velineon 540XL Brushless

Motor, Velineon® 540XL, 2400Kv 70mm, brushless (assembled with 12-gauge wire and gold-plated bullet connectors) (for Maxx®)

1.395,-

1.595,-

-13%

Hovedbilde Traxxas 4954X Hex Wheel Hubs 14mm Aluminium (4)

Traxxas 4954X Hex Wheel Hubs 14mm Aluminium (4)

Wheel hubs, hex, 6061-T6 aluminum (blue) (4)/ axle pins (2.5x10mm) (4) Replace the stock molded hex hub adapters with these absolutely bulletproof 6061-T6 aluminum hex hubs. The aluminum hex hubs are CNC machined for the utmost precision and feature machined accents for incredible detail. The aluminum hex hubs will not develop play over time and they clearly stand out every time the wheels are removed from the vehicle.

229,-

Hovedbilde Dusty Motors 0031 Slash 4x4 HCG Dust Protection Cover

Dusty Motors 0031 Slash 4x4 HCG Dust Protection Cover

Dusty Motors Dust Protection Cover for Traxxas Slash 4x4 (HCG Chassis) - Black DMC0031 This is a high quality, hand made, dust and water splash proof shroud, designated to fit a particular model. Shroud comes with a zipper, which allows to access the internals of a model i.e. connecting/disconnecting batteries and turning a model on/off without removing a shroud. While taking a break between the running stints the shroud can be unzipped to allow ESC and motor to cool quicker. Shroud is made from the highest quality materials. That is why it is strong, durable and efficient. The open area of a material is more than 50% of total shroud surface, so it ensures a very good airflow in order to keep the model electronics cool. Shock absorber cover is included into the package. Shock absorber cover comes in one long piece, so it could be cut into lengths that particular shock absorbers require. Cover is made from elastic material in order to fit shock absorbers of different diameters. One included length of a cover will be enough for 4-8 shock absorbers, depending on a length of one.

359,-

409,-

-12%

Hovedbilde RPM 81312 Low Visibility Wheelie Bars for Slash 2WD, ...

Hovedbilde RPM 81312 Low Visibility Wheelie Bars for Slash 2WD, ...

RPM 81312 Low Visibility Wheelie Bars for Slash 2WD, ...

RPM Low Visibility Wheelie Bars for Slash 2WD, Slash 4×4, Losi SCTE & ECX Torment 4×4 Quick Notes: Designed for use with RPM rear bumpers / bumper mounts only Fits the RPM Slash 2wd Rear Bumper Fits the RPM Slash 4×4 Rear Bumper Fits the RPM ECX Torment 4×4 Rear Bumper Fits the RPM Losi SCTE Rear Bumper Mounts A serious issue with most currently available wheelie bars is the inability to use the truck as an off-road vehicle because most wheelie bars tend to stick out too far behind the truck. The RPM Low Visibility Wheelie Bar solves that problem! Since our wheelie bar and included wheels sits inside the protection of the rear bumper, they don’t stick out allowing the truck to function normally when rippin’ up the local track, yet still do their job when the occasional heavy finger pull yanks the front wheels off of the ground! The RPM Low Visibility Wheelie Bar design bolts directly to all RPM Slash bumpers (both 2wd and 4×4), Losi SCTE & ECX Torment 4×4 at the mud flap mounts, while still allowing the use of RPM Mud Flaps (RPM #81012) as well as our Losi SCTE Bumper Mounts (RPM #73312! The RPM Wheelie Bar stays tucked up behind the rear bumper, yet sitting low enough to allow the wheels to touch down once the front end starts catching some serious air! Now any Slash, SCTE or Torment 4×4 owner can pull some sick wheel stands without the fear of grinding crucial rear bumper support components into dust! RPM Low Visibility Wheelie Bars are sold ready to install on an RPM Rear bumper (sold separately) with all necessary mounting hardware and complete instructions for assembly. RPM Low Visibility Wheelie Bars are manufactured from our trademark blend of incredibly strong nylons and backed by our limited lifetime warranty again breakage. Tech Notes: RPM Low Visibility Wheelie Bars are designed for use with RPM Slash 2wd and Slash 4×4 rear bumpers, ECX Torment 4×4 rear bumpers as well as our Losi SCTE Rear Bumper Mounts exclusively and will not work with stock rear bumpers or bumper mounts.

149,-

Hovedbilde Traxxas 6877 Gear Cover/Motor Wire Hold Down Slash 4X4

Traxxas 6877 Gear Cover/Motor Wire Hold Down Slash 4X4

This is the Gear Cover/Motor Wire Hold Down for use on the Traxxas Slash 4X4. FEATURES: Nylon construction Black in color INCLUDES: One Gear Cover One motor wire hold down REQUIRES: Installation on the vehicle

59,-

69,-

-14%

Hovedbilde RPM 80023 Front Bumper Chrome & Skid Plate Gray Slash ...

RPM 80023 Front Bumper Chrome & Skid Plate Gray Slash ...

Front Bumper & Skid Plate for the Traxxas Slash 4×4 Quick Notes: – replaces stock Traxxas #6835 – matching Rear Bumper also available – optional Light Canister Set also available Description When Traxxas first announced the 4×4 version of the Slash, RPM customers immediately started asking us if our 2wd version parts would fit it. Sadly, that was not the case. Since then, we’ve been working hard to make all of those RPM parts 2wd owners love, fit on the Slash 4×4 version. Our three-piece front bumper / skid plate design for the Traxxas 4×4 is simple, yet strong, effective and highly attractive. We made it a three-piece design to give the Slash owner the option of full front-end bash-proof and crash-proof protection with the skid plate mount, skid plate and bumper installed or if they’re racing, they can remove the bumper and use the skid plate mount and skid plate as a light-weight alternative bumper / skid plate that sheds 27 grams (almost a full ounce) of weight from the front end of the truck. Once the race is over, simply reinstall the bumper and full bash protection is once again available! Our Traxxas Slash 4×4 front bumper design eliminates the bumper support ring and the 4 screws behind the stock bumper while using a thicker skid design to supply the cushioning resistance a basher-proof bumper needs. By eliminating the stock bumper support ring, absolutely no frontal impact crash energy is transferred into the upper half of the differential housing. We supply longer bumper mounting screws as well, so any impact energy from down low has less of a tendency to pull the mounting screws out from the bottom half of the differential housing. With an RPM impact-absorbing front bumper installed, the energy transferred from frontal impacts will be greatly reduced as well. RPM front bumpers for the Traxxas Slash 4×4 are available in three color options: black on black, blue on blue or a chrome bumper on a gray skid plate. Suggestions: RPM light canister sets (RPM #80982 & #80983) fully integrate with our new Slash 4×4 front bumper and skid plate, giving the Slash 4×4 that awesome Desert Racing Truck look and open the 4×4 up to the addition of LED lights for nighttime fun! Don’t forget to check out our Roof-Mounted Light Bar Set too (RPM #80922, #80923 or #80925) for 6 more light canisters of night-blasting fun!

269,-

299,-

-10%

Hovedbilde Traxxas 1654X Wheel Hubs Aluminum (2)

Traxxas 1654X Wheel Hubs Aluminum (2)

These are Optional Blue Anodized Aluminum Wheel Hex Hubs for Traxxas vehicles such as the Stampede, Rustler, 4-Tec, and other older Traxxas kits. FEATURES: Blue aluminum construction INCLUDES: Two hex hubs Four axle pins REQUIRES: Assembly onto axles. SPECS: Hex Length: 12mm (.47") Hex Thickness: 6.1mm (.24") Axle Pin Length: 9.6mm (.38") COMMENTS: These hubs could be used with other vehicles utilizing the same pin/hex design. These hubs Will Not work on the T-Maxx or E-Maxx.

109,-

Hovedbilde Traxxas 2660 Long Big Bore Shocks w/o Springs (2)

Traxxas 2660 Long Big Bore Shocks w/o Springs (2)

These are LONG BIG BORE SHOCKS by Traxxas. They may be used with the many Taxxas cars. FEATURES: Pre-assembled shocks only require filling with included oil, attaching included spacers and (not included) springs. Big-bore long shocks are hard-anodized and teflon coated T-6 aluminum. INCLUDES: Two Shock Caps (aluminum) One Silicone Oil Bottle Two Cylinders (aluminum) 1-1/2" Three Diaphragms (black rubber) Three Large C Clips Two Ball Ends (white plastic) Three Flat Washers (nylon) 6mm Two Bushings (metal) Two Spacers (teflon) 5mm Four Pistons (black plastic) Six "O" Rings (blue) Two Spring Retainers (plastic) Two Flat Washers (nylon) 5mm Two Spring Spacers (black plastic) Five Small E Clips Two Shock Shafts (1-3/4"x1/8") approximately Twelve Spring Adjusters (various size) REQUIRES: Springs C ring or needle nose pliers Tweezers

389,-

419,-

-7%

Hovedbilde Traxxas 6863 Springs Front +10% Rate Orange Slash 4x4 ...

Traxxas 6863 Springs Front +10% Rate Orange Slash 4x4 ...

This is a pair of Pink Rate Front Shock Springs for the Traxxas Slash. FEATURES: Steel construction, white in color Pink firmness rating +10% progressive compression INCLUDES: Two Pink Rate Front Shock Springs for the Traxxas Slash REQUIRES: Installing over outside of shocks SPECS: Height: 2.4" (62mm) Wire Diameter: 0.06" (1.5mm)

59,-

Hovedbilde Traxxas 3340 Cooling fan, Velineon VXL-3s ESC

Hovedbilde Traxxas 3340 Cooling fan, Velineon VXL-3s ESC

Traxxas 3340 Cooling fan, Velineon VXL-3s ESC

The Velineon® VXL-3s Accessory Cooling Fan reduces ESC temperatures during extended operation for maximum power flow. It securely clips onto the VXL-3s heatsink for easy installation. Wires are neatly routed thanks to the integrated connector clip. Simply plug the accessory cooling fan into the Velineon VXL-3s accessory power connector and clip the fan onto the heatsink for increased cooling.

299,-

329,-

-9%

Hovedbilde Traxxas 8331 Suspension Arms Rear (2)

Traxxas 8331 Suspension Arms Rear (2)

Suspension arms, rear (left & right)

99,-

Hovedbilde Traxxas 8332 Caster Blocks (2)

Traxxas 8332 Caster Blocks (2)

Caster blocks (c-hubs) (2)/ kingpin bushings (4)

49,-

Hovedbilde Traxxas 8333 Suspension Arms Front (2)

Traxxas 8333 Suspension Arms Front (2)

Suspension arms, front (left & right)

99,-