Hopp til innhold
Hjem / Reservedeler/Option-parts / Option Parts Biler / Traxxas El-Biler / 77096-4 X-Maxx 8S Options parts / Traxxas 7760 Motor Mounts Front & Rear Set Alu Blue X-Maxx, XRT
-6%

Traxxas 7760 Motor Mounts Front & Rear Set Alu Blue X-Maxx, XRT

Art.nr: TRX 7760-BLUE

469,-

499,-

- 6%
Traxxas

Traxxas
** Ikke på lager

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Traxxas 7760-RED - Aluminum Motor Mounts - Red

Add strength and style to your X-Truck™ with these aluminum motor mounts. The mounts are machined from tough 6061-T6 aluminum for unbeatable toughness with a brilliant anodized finish and laser-etched logo. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time.

Features:

  • Milled from high-grade 6061-T6 aluminum
  • Brilliant anodized finish
  • Premium quality construction with factory fit and finish
  • Fits X-Maxx® and XRT®

Accessory part for these models:

  • X-Maxx®
  • XRT®

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 2085RL Servo 46Kg 0,13s with Seering Link & ...
Traxxas 2085RL Servo 46Kg 0,13s with Seering Link & ...
Traxxas 2085RL - Digital High Torque Metal Gear BB WP Servo Servo, digital high-torque/high-speed, metal gear (ball bearing), waterproof The High Torque Maxx Servo is the ultimate steering upgrade for your X-Maxx®, XRT®, or Maxx®. With a staggering 46.8kg/cm of torque and full steel gears, the High Torque Maxx Servo delivers total steering authority on even the largest Sledgehammer® tires. The case features an anodized aluminum center section with cooling fins and ball bearings for increased precision. The servo includes a stiffer servo saver spring and steel steering linkage for maximum steering authority and control during high speed driving. Servo requires Maxx® mount found in Maxx, X-Maxx®, and XRT®. Does not fit other vehicles. FEATURES: Fits X-Maxx, XRT, and Maxx trucks Fully waterproof, not “water resistant” Compatible with Traxxas Stability Management® (TSM) 46.8kg/cm torque at 6.0 volts 0.13 sec/60° at 6.0 volts Full steel gears Full ball bearings Aluminum center case with cooling fins Replacement part for these models: X-Maxx® Ultimate XRT® Ultimate Accessory part for these models: Funco® Pro Scale® Sand Car X-Maxx® XRT®

1.495,-

1.695,-

KJØP
-12%
Hovedbilde Traxxas 7843-BLUE Steering Bellcranks Set Alu Blue XRT
Traxxas 7843-BLUE Steering Bellcranks Set Alu Blue XRT
Traxxas 7843-BLUE - Aluminum Bellcrank Assembly - Blue Enhance the steering precision, strength, and looks of your XRT™ with this aluminum bellcrank steering assembly. Machined from tough 6061-T6 aluminum, these bellcranks add color and style to your machine. The brilliant hard-anodized finish allows the bellcranks to pivot precisely with sealed ball bearings for silky-smooth turning action. The set also includes aluminum supports, servo saver, double-shear drag link, upgraded tension spring, and mounting hardware. Add the 7747 aluminum servo horn for even greater strength and precision. Genuine Traxxas accessories are made by Traxxas, for Traxxas, to guarantee a perfect factory fit every time. Features: Includes bellcranks, posts, drag link, servo saver, upgraded tension spring, and hardware Milled from high-grade 6061-T6 aluminum Brilliant anodized finish Premium quality construction with factory fit and finish Compatible with 7747 aluminum servo horn Fits XRT® Funco® Pro Scale® Sand Car Accessory part for these models: XRT® Funco® Pro Scale® Sand Car

829,-

899,-

KJØP
-8%
Hovedbilde Traxxas 6449R Spur Gear 54-Tooth Steel Wide 1.0 Metric ...
Traxxas 6449R Spur Gear 54-Tooth Steel Wide 1.0 Metric ...
Spur gear, 54-tooth, steel (wide-face, 1.0 metric pitch)

219,-

KJØP
Hovedbilde Traxxas 7746X Steering Link & Servo Saver Spring HD ...
Traxxas 7746X Steering Link & Servo Saver Spring HD ...
Steering link, steel/ servo saver spring, heavy duty (use with #2085X metal gear servo)

99,-

KJØP
Hovedbilde Traxxas 5042 Oil Differential 1M Weight
Traxxas 5042 Oil Differential 1M Weight
Oil, differential (1.000.000 weight) (Typically used for center differential)

149,-

KJØP
Hovedbilde Traxxas 6489X Pinion Gear 16T 1.0M Pitch for 5mm shaft
Traxxas 6489X Pinion Gear 16T 1.0M Pitch for 5mm shaft
Gear, 16-T pinion (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)   16-tooth pinion gear. Fits 5mm shaft, 1.0 metric pitch. Hardened steel for use with steel spur gears. Includes set screw.

49,-

KJØP
Hovedbilde Traxxas 6490X Gear 17T Pinion X-Maxx
Traxxas 6490X Gear 17T Pinion X-Maxx
This is the optional 17 Tooth Pinion Gear for the Traxxas X-Maxx. Pionion Gear, 17-T (1.0 metric pitch) (fits 5mm shaft)/ set screw (compatible with steel spur gears)  

59,-

KJØP
Hovedbilde Traxxas 1747P Lock Nut Aluminium Flanged M4 Pink (4)
Traxxas 1747P Lock Nut Aluminium Flanged M4 Pink (4)
Pink-anodized aluminum M4 flanged, serrated lock nuts (4) Fits: Traxxas Slash (2WD) Traxxas Slash Dakar / Robby Gordon Traxxas Ford F-150 SVT Raptor Traxxas Bandit Traxxas Bandit VXL Traxxas Rustler Traxxas Rustler VXL Traxxas Stampede (2WD) Traxxas Stampede VXL (2WD) Traxxas Skully Traxxas Craniac Traxxas BIGFOOT

99,-

109,-

KJØP
-9%
Hovedbilde LouiseRC 3202C Tire & Wheel MT-Pioneer 2,8
LouiseRC 3202C Tire & Wheel MT-Pioneer 2,8" Chrome ...
  0-Offset for 2WD Rear Fits: Traxxas STAMPEDE 2WD Rear Traxxas STAMPEDE VXL 2WD Rear Traxxas RUSTLER 2WD Rear Traxxas RUSTLER VXL 2WD Rear Traxxas SKULLY 2WD Rear Traxxas CRANIAC 2WD Rear Arrma Vorteks Mega 2WD Front & Rear Arrma Vorteks BLS 2WD Front & Rear Arrma Granite Mega 2WD Front & Rear Arrma Granite BLS 2WD Front & Rear Team Durango DEST210 2WD Front & Rear Kyosho Rage 2WD Front & Rear Kyosho Mad Bug 2WD Front & Rear Also fits other 1/10 Scale Monster Trucks with 12 mm hex Specs: Wheel diameter: 2.8" Tire Diameter: 122 mm Tire Width: 68 mm Weight (each): 170 g Hex: 12 mm Offset: 0" Tire Compound: Soft Wheel finish: Chromed Nylon

299,-

329,-

KJØP
-9%
Hovedbilde Traxxas 3678P Wheelie Bar Complete Pink
Traxxas 3678P Wheelie Bar Complete Pink
Information Fits: Traxxas Bandit Traxxas Bandit VXL Traxxas Rustler Traxxas Rustler VXL Traxxas Stampede (2WD) Traxxas Stampede VXL (2WD) Traxxas Skully Traxxas Craniac Traxxas BIGFOOT

179,-

KJØP
Hovedbilde Traxxas 3623-GRN Skid Plates Front and Rear Green
Traxxas 3623-GRN Skid Plates Front and Rear Green
Traxxas 3623-GRN - Skid plates, front & rear (green) Green front and rear skid plates for Traxxas 2WD Stampede models.

89,-

KJØP
Hovedbilde Traxxas 3475 Cooling fan, Velineon VXL-8s ESC
Traxxas 3475 Cooling fan, Velineon VXL-8s ESC
Cooling fan, Velineon VXL-8s ESC

239,-

KJØP
Hovedbilde Traxxas 3934A Body Clips Heavy Duty Black (12)
Traxxas 3934A Body Clips Heavy Duty Black (12)
Body clips, heavy duty (black) (12)

39,-

49,-

KJØP
-20%
Hovedbilde Traxxas 5038X Spinning Carousel Rack with Shock Oil ... Hovedbilde Traxxas 5038X Spinning Carousel Rack with Shock Oil ...
Traxxas 5038X Spinning Carousel Rack with Shock Oil ...
Traxxas Premium Shock Oil Set 60ml including Rack (7 oils) New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: The best way to organize the full lineup of oil from Traxxas! Premium bearing spinner provides smooth movement Holds 7 bottles to organize the full set of oils Includes seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 20-80WT (200-1000cSt) Bottle sizes: 60ml

699,-

859,-

KJØP
-19%
Hovedbilde Proline 3518-15 Pre-Cut Brute Bash Armor Body (White) ... Hovedbilde Proline 3518-15 Pre-Cut Brute Bash Armor Body (White) ...
Proline 3518-15 Pre-Cut Brute Bash Armor Body (White) ...
Pre-Cut Brute Bash Armor Body (White) for PRO-MT 4x4, Stampede 4x4 & Rustler 4x4 (requires extended body mount kit) This is a Pre-Cut Brute Bash Armor White Body for PRO-MT 4x4 & Stampede® 4x4. Pro-Line has developed the Ultimate Bash body for your PRO-MT 4x4 & Stampede® 4x4 – the pre-cut Brute body featuring Pro-Line's all-new Bash Armor material! If you are like us, you want a dependable high strength body you can count on for your truck. The Brute Bash Armor White Body has been developed from the ground up to be the toughest body Pro-Line has ever produced. The all-new Bash Armor material is twice as thick as regular 1:10 truck bodies and is ultra-flexible to reduce the chance of cracking and shattering. Unlike clear polycarbonate, the Bash Armor material is White and is not paintable, so Pro-Line includes detailed decal sheets to complete the look. The Brute is Pro-Line's take on a modern truck and features a bold grill with eye-pleasing body lines sure to turn heads at your local bash spot. If you are ready to battle your buddies, then get the strongest body possible for your truck - the Pre-Cut Brute body with Bash Armor material technology! Features: All-new Bash Armor Ultra-Durable Material! Body Material is Twice as Thick as Normal Bodies Brute Styling is Tough and Modern Bash Amor Material Flexes Instead of Shattering Battle your Buddies with Confidence Detailed Graphics and Window Stickers Included Pre-Cut to Save You Time! Included: Pre-Cut Brute Bash Armor (White) Body (1 pc) Detailed Decal Sheets Fits: PRO-MT 4x4 Stampede® 4x4 (requires extended body mount #6265-00) Specs: Length:   16.1" (409mm) Width:   6.5" (165mm) Height:   4.3" (109mm) Wheelbase:   10.4" (264mm)

1.199,-

1.299,-

Ikke på lager
-8%
Hovedbilde RPM 70832 Rear Bumper for Stampede 2WD - Blk ... Hovedbilde RPM 70832 Rear Bumper for Stampede 2WD - Blk ...
RPM 70832 Rear Bumper for Stampede 2WD - Blk ...
RPM Rear Bumper for Stampede 2WD - Black Compatible with Traxxas or RPM Rear Bumper Mounts (not included) Quick Notes: Works with or without a Wheelie Bar (not included) Scale rear end protection unmatched by anything else available Compatible with Traxxas or RPM Rear Bumper Mounts (not included) Integrated 5mm LED sockets for lights! (LED’s not included) Finally, a rear bumper for the Traxxas Stampede 2wd is now available that combines awesome scale looks with performance that works! Our new rear bumper is designed to protect the rear of the chassis, the motor and the body, all while still allowing the use of a stock Traxxas Wheelie Bar (Traxxas #3678 – not included). Additionally, if you decide to run without the Wheelie Bar, our rear bumper is so versatile, it’ll adapt and allow either configuration. Our rear bumper for the Stampede 2wd consists of a scale bumper that uses design elements from many of today’s top full-scale bumper manufacturers. We start with an upper tubular shape, followed by faux stamped sheet metal filleted holes, a scale license plate area and with a final touch of a pair of scale 3” square openings for 5mm LEDs. That’s right, our bumper allows you to install your favorite 5mm LEDs (not included) to be used as taillights, reverse lights or any other use you can imagine! The RPM bumper supports are designed tough, with serious impact absorption characteristics built in. With the use of an RPM Rear Bumper Mount (RPM #80902 or #80905 – not included), the protection for the motor becomes nearly indestructible! Each RPM Rear Bumper is made in the USA from our engineering grade nylons and is backed by our limited lifetime warranty against breakage. Tech Notes: RPM Rear Bumpers for the Traxxas Stampede 2wd require a bumper mount (either a Traxxas #3677, RPM #80902 or RPM #80905 – not included) or a Wheelie Bar (Traxxas #3678 – not included) to install the RPM Rear Bumper. Some body trimming may be necessary to clear the bumper supports at lower body height settings. Tested and guaranteed to work with Traxxas #3617, #3617R & #3617X bodies with minimal trimming required. Other bodies may require additional trimming beyond what is mentioned in the instructions supplied. Any standard sized, round 5mm LED’s (not included) will work with RPM bumpers.

129,-

KJØP
Hovedbilde RPM 81670 Replacement Bearings for RPM X-Maxx ... Hovedbilde RPM 81670 Replacement Bearings for RPM X-Maxx ...
RPM 81670 Replacement Bearings for RPM X-Maxx ...
RPM Replacement Bearings for RPM X-Maxx Oversized Axle Carriers Not Compatable with 7752 Quick Notes: They are NOT compatible with stock Traxxas axle carriers This is a set of replacement bearings for RPM #81732 Oversized Axle Carriers for the Traxxas X-Maxx. These bearings are not replacement bearings for stock Traxxas Axle Carriers (#7752). Tech Notes: RPM replacement bearings are 20x32x7mm in size and only fit RPM #81732 Oversized Axle Carriers. Not compatible with stock Traxxas axle carriers.

169,-

KJØP
Hovedbilde RPM 81164 Wide Front Bumper for 2WD Bandit, Rustler & ... Hovedbilde RPM 81164 Wide Front Bumper for 2WD Bandit, Rustler & ...
RPM 81164 Wide Front Bumper for 2WD Bandit, Rustler & ...
RPM Wide Front Bumper for 2WD Bandit, Rustler & Stampede - Green Replaces stock Traxxas #2735 Quick Notes: Fits the Electric Stampede, Electric Rustler, Bandit, Nitro Sport, Nitro Stampede & Nitro Rustler Replaces stock Traxxas #2735 Give your favorite Traxxas vehicle added protection with the RPM wide front bumper. This bumper stands six inches wide and adds an extra 1-1/2” worth of bulletproof, RPM protection to the front end of the vehicle. RPM designed this bumper with the backyard basher in mind by making it with our guaranteed unbreakable blend of nylons and is molded in black, blue, green and red. This bumper will help reduce front-end damage during head on collisions with curbs, trees, etc!

99,-

KJØP
Hovedbilde Traxxas 6443 Spur Gear 50-Tooth Steel (Machined, ...
Traxxas 6443 Spur Gear 50-Tooth Steel (Machined, ...
Traxxas 6443 Spur gear, 50-tooth (machined, hardened steel) (wide face, 1.0 metric pitch) 50-tooth spur gear (1.0 metric pitch) is machined from hardened steel with extra-wide steel teeth for ultimate power handling and durability. Traxxas spur gears let you fine-tune the performance of your Traxxas model. Changing gear ratios can help balance acceleration and top speed for different running conditions. Please consult your owner’s manual for more information on recommended gearing options for your specific model. Accessory part for these models: E-Revo® VXL Brushless Maxx® X-Maxx® XO-1® XRT™

429,-

469,-

KJØP
-9%
Hovedbilde Traxxas 7754R Drive Cup HD (for Steel Driveshaft ...
Traxxas 7754R Drive Cup HD (for Steel Driveshaft ...
Traxxas 7754R Drive cup, steel, extreme heavy duty (2)/ 3x8mm CS, heavy duty (2) (use only with #7750X driveshaft) (machined, heat treated) Give your X-Maxx® or XRT™ the toughest driveline possible with these extreme heavy-duty drive cups. The drive cups are machined out of high-grade heat-treated steel to resist rounding out from dogbone contact. Includes 3x8 mm screws (2). Sold in pairs. (Use only with 7750X driveshafts). Accessory part for these models: X-Maxx® XRT™

499,-

539,-

KJØP
-7%
Hovedbilde YR YB0248BX RC PTFE BEARING SET WITH BEARING OIL FOR ... Hovedbilde YR YB0248BX RC PTFE BEARING SET WITH BEARING OIL FOR ...
YR YB0248BX RC PTFE BEARING SET WITH BEARING OIL FOR ...
    Feature: RC Ball bearings should always be your first upgrades, it reduces friction for less rolling resistance, and that means higher speed and longer the running times. RC Ball bearings hardly require maintenance and last a lot longer than stock Oilite bushings. Yeah Racing RC Ball Bearings have the lowest resistance. They are manufactured by Aircraft quality steel. Pre-lubricated to ensure its excellent performance! These high quality bearings outweigh the other low quality one: Aircraft quality material More durable Higher precision *Now comes with bearing oil for maintaining bearings in long run. (This new bearing set (with bearing oil) will replace the old item.) Specification: Telfon Bearing For Traxxas 4WD Stampede/Rustler/Bandit Material: Metal Include: Bearing (15Pcs) -YB6011B    5mm x 8mm x 2.5mm 4Pcs -YB6014B    5mm x 11mm x 4mm  7Pcs -YB6016B    6mm x 12mm x 4mm  2Pcs -YB6022B    8mm x 16mm x 5mm  2Pcs -YB6023B    10mm x 15mm x 4mm 5Pcs -YB6026B    12mm x 18mm x 4mm 1Pc Bearing Oil (15ml) #YA-0215

209,-

229,-

KJØP
-9%
Hovedbilde Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector
Traxxas 2872X LiPo 3S 11.1V 5000mAh 25C w/iD Connector
This is the Traxxas Power Cell 11.1V 5000mAh 25C 3S LiPo Battery.     FEATURES Semi rigid construction does not require a hard case and eliminates  wire harness connectors that can loosen and fail  Engineered specifically to fit Traxxas models  New high current connector with gold-plated copper terminals and  integrated balance connector  iD Auto Battery Identification allows Traxxas iD equipped chargers to  automatically set and optimize charge settings for specific battery  MAXX cable high-efficiency 12 gauge silicone jacketed wire   INCLUDES Traxxas Power Cell 11.1V 5000mAh 25C LiPo 3S Battery with High  Current Connector and Integrated Balance Plug   REQUIREMENTS LiPo compatible charger such as the Traxxas EZ-Peak Plus,  LiPo charging bag   SPECIFICATIONS  Configuration: 3S1P  Continuous Discharge: 25C (125A)  Max Burst Rate: 50C (250A)  Watt Hours: 55.5  Charge Rate: 1C (5A)  Max Charge Rate: 2C (10A)  Dimensions: 6.1 x 1.02 x 1.7" (155 x 26 x 44mm)  Weight: 13.3oz (376g)   COMMENTS ALWAYS use a LiPo-approved Charger  ALWAYS use a LiPo Cell Balancer  NEVER Charge over 4.20V per cell  NEVER Charge at currents greater than 1C  NEVER Trickle Charge  NEVER allow to Discharge below 3.2V per cell  NEVER disassemble or modify pack wiring in any way or puncture cells  NEVER place on combustible materials or leave unattended during  charging  ALWAYS Charge in a fireproof location  ALWAYS set charger's output volts to match battery volts  ALWAYS keep out of reach of children

995,-

1.095,-

KJØP
-9%
Hovedbilde Traxxas 3640 Suspension Screw Pin Set Steel
Traxxas 3640 Suspension Screw Pin Set Steel
These are the Suspension Screws Pins for the                      Traxxas Rustler, Stampede and Bandit.            The hinge pins hold the suspension arms to the bulkheads FEATURES: Durable steel construction INCLUDES: Two 48mm pins           Two 34mm pins           Two 30mm pins           Two 28mm pins           Two 25mm pins REQUIRES: Installation on the Rustler, Stampede or Bandit

59,-

69,-

KJØP
-14%
Hovedbilde Traxxas 6868 Springs Rear +20% Rate Blue Slash 4x4 (2) ...
Traxxas 6868 Springs Rear +20% Rate Blue Slash 4x4 (2) ...
This is a pair of Blue Rate Rear Shock Springs for the Traxxas Slash. FEATURES: Steel construction, white in color           Blue firmness rating           +20% progressive compression INCLUDES: Two Blue Rate Rear Shock Springs for the Traxxas Slash REQUIRES: Installing over outside of shocks SPECS:    Height: 2.4" (62mm)           Wire Diameter: 0.06" (1.5mm)

79,-

KJØP
Hovedbilde Traxxas 2416 Pinion Gear 48P 16T w/Set Screw
Traxxas 2416 Pinion Gear 48P 16T w/Set Screw
This is the 16 Tooth 48 Pitch Pinion Gear from Traxxas. FEATURES: Steel construction INCLUDES: 16 Tooth 48 Pitch Pinion Gear with set screw REQUIRES: Installing on motor shaft SPECS:    Number of Teeth: 16T           Pitch: 48           Inner Diameter: 0.12" (3mm)

49,-

59,-

Ikke på lager
-17%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png