Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / E-revo 1/16 VXL 71076-8 / Traxxas 7066X Hard-Anodized GTR Shock Body VXL

Traxxas 7066X Hard-Anodized GTR Shock Body VXL

Art.nr: TRX 7066X

115,-

Traxxas

Traxxas
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is the Hard Anodized GTR Shock Body for use on the
                 Traxxas 1/16 E-Revo VXL 4WD RTR.

FEATURES: Hard-anodized, teflon coated aluminum construction
          Gun metal in color


INCLUDES: One GTR Shock Body


REQUIRES: Installation on the vehicle


SPECS:    Length: 22mm (0.87")
          Diameter: 10mm (0.39")

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde Traxxas 7030X Bulkhead Front Left & Right 3x10mm BCS ...
Traxxas 7030X Bulkhead Front Left & Right 3x10mm BCS ...
This is the Front Bulkhead for use on the                  Traxxas 1/16 scale E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two front bulkhead halves           Four 3x10mm Button Head Screws           One 2.5x23mm Cap Screw REQUIRES: Installation over front diff assembly  

79,-

KJØP
Hovedbilde Traxxas 7062 GTR Composite Shocks Rebuild Kit VXL
Traxxas 7062 GTR Composite Shocks Rebuild Kit VXL
This is the Traxxas GTR Shock Rebuild Kit. FEATURES: Renews two GTR shocks INCLUDES: Four O-Rings           Two Bladders           Six E-Clips           Four Hollow Balls           Two Shock Rod Ends           Two Pistons           Two Spacers REQUIRES: Installation in shocks

59,-

KJØP
Hovedbilde Traxxas 7065 Caps & Spring Retainers GTR Shock VXL
Traxxas 7065 Caps & Spring Retainers GTR Shock VXL
These are the Caps and Spring Retainers for use on the shocks on the                    Traxxas 1/16 E-Revo and Slash Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: Two Upper Caps           Four Hollow Balls           Two Bottom Caps           Two Upper Retainers           Two Lower Retainers REQUIRES: Installation on the shocks

45,-

KJØP
Hovedbilde Traxxas 7063 Shaft/GTR Shock VXL (2)
Traxxas 7063 Shaft/GTR Shock VXL (2)
These are the GTR Shock Shafts for use on the                    Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Aluminum construction           Silver in color INCLUDES: Two Shock Shafts REQUIRES: Installation inside shocks SPECS:    Length: 25.15mm (0.99")           Diameter: 2.5mm (0.1")

49,-

KJØP
Hovedbilde Traxxas 6543 Connector Power Tab short
Traxxas 6543 Connector Power Tab short
This is a Traxxas Power Tap Connector, and is intended for use with Traxxas vehicles equipped with the Traxxas Telemetry system (Traxxas TQi Radio System with Docking Base). The Power Tap Connector attaches to your electric vehicle's speed control, allowing you to monitor battery voltage as you drive. Needed to Complete: TRA6521 temperature sensor (long) or TRA6523 temperature sensor (short) is required to connect the power tap connector. Note: In order to add telemetry to your Traxxas model, a TQi Radio System with Docking Base is required, as well as an iPhone or iPod with the Traxxas Link App installed. Most Traxxas kits require additional components to install the telemetry system. Refer to your instruction manual for details.

69,-

KJØP
Hovedbilde Traxxas 7381 Differential Locker (2)
Traxxas 7381 Differential Locker (2)
 These are the Differential Lockers from Traxxas. FEATURES: Plastic construction INCLUDES: Two Differential Lockers

39,-

KJØP
Hovedbilde RPM 80692 Suspension Arms Front Black (2+2) 1/16 ... Hovedbilde RPM 80692 Suspension Arms Front Black (2+2) 1/16 ...
RPM 80692 Suspension Arms Front Black (2+2) 1/16 ...
RPM Front A-arms for 1/16 E-Revo - Black Replaces stock Traxxas #7131 Quick Notes: Replaces stock Traxxas #7131 Matching Rear A-arms are available Matching Axle Carriers are available Upon the release of the Traxxas 1/16th E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived! A significant problem we have been able to eliminate was slop in the suspension system. In some cases, we found as much as 1/32” of slop in the stock A-arms! That has been remedied with these new RPM versions. Our A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving. Unique to RPM suspension arms is our angled leading and trailing edges. We incorporate a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them.   RPM front A-arms for the Traxxas 1/16 E-Revo are sold in sets of four – both upper and both lower a-arms

179,-

199,-

KJØP
-10%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png