Hopp til innhold
-9%

Traxxas 5035 Silicon Shock Oil Premium 60WT (700cSt) 60ml

Art.nr: TRX 5035

99,-

109,-

- 9%
Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

Traxxas 60WT/700cSt Premium Shock Oil 60ml

New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle.

Features:

  • Seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt)
  • 100% silicone oil for maximum consistency
  • Precision-pour, twist-nozzle cap


Specs:

  • Viscosity: 60WT (700cSt)
  • Bottle size: 60ml


Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Art.nr: TRX 5038X
Copied
Traxxas Premium Shock Oil Set 60ml including Rack (7 oils) New from Traxxas is a complete line of premium silicone shock oil. Available in seven steps of viscosity, this 100% pure silicone oil allows precise vehicle suspension tuning for maximum performance, no matter where you drive. The precision-pour, twist-nozzle cap makes it quick and easy to fill shock bodies, without all the mess. cSt viscosity specification ensures consistent performance with every bottle. Features: The best way to organize the full lineup of oil from Traxxas! Premium bearing spinner provides smooth movement Holds 7 bottles to organize the full set of oils Includes seven precise viscosities ranging from 200cSt to 1000cSt (20wt to 80wt) 100% silicone oil for maximum consistency Precision-pour, twist-nozzle cap Specs: Viscosity: 20-80WT (200-1000cSt) Bottle sizes: 60ml

699,-

859,-

KJØP
-19%

Kunder kjøpte også

Yeah Racing Aluminum 380 Motor Heat Sink w/ Cooling Fan Blue Description: This is Yeah Racing Aluminum 380 Motor Heat Sink w/ Cooling Fan Blue. This Heat Sink w/ Fan features durable fan which creates strong winds to help cool off the motor. This Heat Sink w/ Fan is economical and great in quality, worth every buck of it. Feature: For: 380 sized Motors Material: Aluminum Fan : 25 X 25mm Color: Blue Include: Yeah Racing Aluminum 380 Motor Blue Heat Sink (1 pc) Fan (1pc) Extender Cable (1pc)

79,-

KJØP
Yeah Racing YBS-0036 Steel Bearing Set (26pcs) For Traxxas 1/8 Sledge Sealed Description: Replace or upgrade to a fullset of bearings for your car for a smoother and more efficient running car! No more looking up all the sizes you need and potentially getting the wrong ones with these custom sets for specific cars!   Feature:   For : Traxxas 1/10 Sledge Sealed Material : Steel Shielding: Rubber   Specification:   YB6011B  5mm x 8mm x 2.5mm (4pcs) YB6015B  6mm x 10mm x 3mm (4pcs) YB6017B  6mm x 13mm x 5mm (2pcs) YB6022B  8mm x 16mm x 5mm (6pcs) YB6025B  10mm x 19mm x 5mm (10pcs)   Include:   Total Bearing (26 Pcs)

269,-

299,-

KJØP
-10%
Traxxas 9579R Ring Gear and Pinion (Machined) Sledge Ring gear, differential/ pinion gear, differential (machined) (front or rear)

649,-

KJØP
Traxxas 9584 Mount Center DIff Sledge Mount, center differential

89,-

KJØP
This is the Traxxas 2-Channel TQ 2.4GHz Transmitter. **This transmitter is compatible only with the TRX 6519 receiver and does NOT accept the Docking Base accessory.** FEATURES Replacement transmitter for several Traxxas vehicles that use the TQ 2.4GHz radio sytem Steering trim adjustment knob INCLUDES Traxxas 2-Channel TQ 2.4GHz Transmitter REQUIREMENTS Four AA batteries

699,-

749,-

KJØP
-7%
  Bronto ladekabler er et must for RC-entusiasten. Ladekabelen er utstyrt med kvalitets 14AWG ledninger. Ladeledningen har en praktisk lengde på 30cm, noe som er godt egnet når du f.eks skal legge batteriet trygt i en sikker ladebag mens det lades. Ladekabel med Traxxas-ID3 til XT60-plugger. Benyttes for lading av batterier med Traxxas ID3-plugg, og kobles rett i ladere med XT60 tilkobling. Spesifikasjoner   Ledning 14AWG Lengde 30cm Tilkobling 1 XT60 Tilkobling 2 Traxxas ID3

125,-

KJØP
Features: Viscosity 10000CPS / 511WT. Optimum for differential and shock absorbers. The silicon oils from absima are extremely heat resistant and available in all viscosities. Viscosities from 100CPS to 900CPS are optimal for shock absorbers and 1000 to 1000000CPS for differential gears.  1 bottle /60ml

109,-

KJØP
RPM Front A-arms for 1/16 E-Revo - Black Replaces stock Traxxas #7131 Quick Notes: Replaces stock Traxxas #7131 Matching Rear A-arms are available Matching Axle Carriers are available Upon the release of the Traxxas 1/16th E-Revo, we immediately started receiving requests for durability upgrades. What better place to start than the front A-arms? With our guaranteed unbreakable material and a proven A-arm design based off of our larger, 1/10th scale Revo A-arms, durability for these little monsters has arrived! A significant problem we have been able to eliminate was slop in the suspension system. In some cases, we found as much as 1/32” of slop in the stock A-arms! That has been remedied with these new RPM versions. Our A-arms eliminate nearly all of the A-arm slop, which allows camber, caster and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent steering and suspension system with a significantly reduced tendency for the truck to randomly wander while driving. Unique to RPM suspension arms is our angled leading and trailing edges. We incorporate a 30-degree bevel in these areas, which reduces the chance of breaking suspension parts since the A-arm will naturally try to transition over objects instead of bluntly plowing into them.   RPM front A-arms for the Traxxas 1/16 E-Revo are sold in sets of four – both upper and both lower a-arms

179,-

199,-

KJØP
-10%
These are the Left and Right Axle Carriers for use on the                 Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Nylon construction           Black in color INCLUDES: One Left Axle Carrier           One Right Axle Carrier REQUIRES: Installation on the vehicle

79,-

KJØP
RPM Rear A-arms for 1/16 E-Revo - Black Replaces stock Traxxas #7132 Quick Notes: Replaces stock Traxxas #7132 Matching Front A-arms available Matching Axle Carriers available Similar to RPM front A-arms, our rear arms eliminate nearly all of the A-arm slop typically found in stock Mini E-Revo rear A-arms, allowing camber and toe angle settings to be more solidly fixed in position. The result: A smoother, more consistent suspension system with a significantly reduced tendency for the truck to randomly wander while driving. RPM rear suspension arms match the same design elements as our fronts using angled leading and trailing edges. By incorporating a 30-degree bevel in these areas, we reduce the chance of breaking suspension parts since the A-arms will naturally try to transition over objects instead of bluntly plowing into them. RPM Mini E-Revo rear A-arms are sold in sets of four – both upper and both lower A-arms. These miniature E-Revo A-arms, like all RPM molded products.

199,-

Ikke på lager
NB!! Denne her erstatter TRX 2925   Traxxas Series 1 battery packs with iD auto battery identification are standard equipment in Traxxas 1/16-scale models. Like all Traxxas Power Cell packs, Series 1 batteries feature heavy-duty construction, flexible silicone-jacketed wires and Traxxas' high current connector for positive plug-in with zero-loss efficiency. 1200mAh capacity NiMH 6-cell 7.2-volt Series 1 Power Cell battery with iD auto battery identification, replacement battery for 1/16 Traxxas vehicles Genuine iD-equipped Power Cell NiMH battery packs make sure you experience all the performance that's been engineered into your Traxxas model Accessory Traxxas iD Auto Battery Identification chargers (sold separately) detect Traxxas iD Power Cell batteries and automatically set and optimize charge settings for unmatched charging safety and simplicity Type     Battery Material     NiMH Colour     Black Width     7.5 cm Height     16 cm Depth     2 cm Weight     152 g

299,-

319,-

KJØP
-6%
This is the Series Battery Connection Wire Harness for use               on the Traxxas 1/16 E-Revo and Slash VXL Vehicles. FEATURES: Traxxas IDConnectors           Combines voltage of connected batteries for increased speed INCLUDES: One Wire Harness with instruction sheet REQUIRES: Installation between batteries and ESC

109,-

KJØP
SkyRC NC1500 NiMH AA/AAA Battery Charger & Analyzer Charging batteries is usually a primitive, boring and mundane activity, and it still is. What matters during the charging process, especially for AA/AAA NiMH battery charging? No doubt, accuracy and safety! The creation of NC1500 not only arises out of the need but also from the desire to have a simple but safe and accurate charger for the battery. NC1500 has four independent slots and supports AA/AAA NiMH batteries, offers a maximum charge rate of 1500mA. Four Independent Slot 1-4 pcs of NiMH AA, or AAA can be charged at the same time in any combinations. 3 Working Modes Charge Mode: Charging current adjustable 200mA / 500mA / 700mA / 1000mA / 1500mA. Useful when battery needs to be recharged without determining the capacity of the battery. It should be used on batteries known to be in good condition and have been in continuous use. Discharge Mode: Discharging current adjustable 100mA / 250mA / 350mA / 500mA / 650mA Useful for analyzing the amount of charge stored in the battery. Battery not recharged at the end of the cycle. Refresh Mode: First recharges the battery, rest for one hours, discharges, rest, then recharges again. Charging and discharging rates are programmable. Reports the discharge capacity at the end of the cycle. Useful when the battery capacity needs to be determined. Also useful for battery with degraded performance. Battery Internal Resistance Detection *At the start of a program, the device always performs a quick standard test first in order to determine the internal battery resistance. Aged or poor condition batteries have a higher IR and therefore heat up more during charge or discharge. The values are estimates and will vary depending on the state of the batteries and operation environment. Convenient Operation Powered by smartphone charger, any standard USB adaptor, power banks, and car chargers (5V/2A USB). Specifications: USB Input Power: 5V/2.1A Trickle Current: 50mA Operation Mode: CHARGE, DISCHARGE and REFRESH Operating Temperature: 0 ~ 45 ℃ Charge Current: 200mA / 500mA / 700mA / 1000mA / 1500mA Discharge Current: 100mA / 250mA / 350mA / 500mA / 650mA Max Charging Capacity: 3000mAh Weight: 106g Size: 108x73x28mm

429,-

KJØP
Gyro unit for MINI-Z readyset. Compatible with blue board RC units, or green board RC units with a blue marking on the gyro connector.  Correspondence table https://rc.kyosho.com/en/gyro-matching

349,-

369,-

KJØP
-5%
Kyosho 32640GM Mini-Z AWD Toyota GRMN Yaris Circuit Package Gun    AWD series is a Four Wheel Drive chassis with Drift tires and paired with the Syncro KT-531P Transmitter. Perfect for drifting in small spaces.   To bring its dynamic performance to even more drivers, the MINI-Z AWD is now available in a Readyset. The MA-020 chassis features VCS (variable camber suspension) on the front that optimizes camber change with suspension stroke and a specially designed circuit board. The chassis design allows space for installing the optional gyro unit(Sold separately:MZW446). The gyro can be adjusted by turning a small volume on the chassis to reflect the amount of steering correction in response to changes in chassis posture, allowing beginners through to experts to drive to their full potential. Fully fitted out with precision ball bearings, the high drive efficiency of the MA-020 chassis is complimented in the Readyset by the unique scale body and 2.4GHz Syncro KT-531P R/C system that requires no frequency band setting, all at a great value price. Simply install the batteries to enjoy the thrill of drift driving with the included set of drift tires. The chassis is compatible with nearly all ASC MINI-Z bodies (additional parts maybe required for some body styles). The MINI-Z AWD promises a unique world of dramatic racing action for you to experience and enjoy. ●MINI-Z AWD Readyset based on MA-020 chassis. ●Special circuit board updated with optimized steering control program. ●Chassis features gyro sensitivity adjustment function. ●Drift tires are installed as standard. ●Readyset requires only batteries to be ready for action! ●Features 2.4GHz Syncro KT-531P transmitter that requires no setup of frequency bands. ●Factory completed body comes with display model quality finish. ●Features VCS (variable camber suspension) that adjusts camber in accordance with suspension stroke. ●Coil spring on front suspension can be easily replaced. ●wide range of optional parts is available to be installed. ●Note: Optional ICS can NOT be used. Also, this model is specially designed for the KT-531P transmitter. It is not compatible with the KT-18, KT-19, EX-5UR ASF, EX-6 or EX-6R transmitters. It is only compatible with the special gyro unit (sold separately:MZW446). Based on the high-performance machine designed and built to compete in the WRC (World Rally Championship, only 500 units of this ultra-tuned Yaris were produced. Drawing on experience cultivated through circuit and rally racing, performance enhancements from improved body rigidity, aerodynamics, and reduced weight, have culminated in the “Ultimate Yaris’. Includes stylish design of Syncro KT-531P transmitter. Features steering / throttle trim as well as dual rate adjustment of steering angle and control the flashing speed of optional LEDs. In addition, the transmitter has a Training Mode feature which limits speed of the car for easy learning (default setting at the time of shipment is Training Mode). AWD chassis is based on the MA-020 chassis and features the RA45 unit. Features VCS front suspension that optimizes camber change in concert with suspension stroke. Replacement of front suspension coil springs is easy. Equipped with strut-type rear suspension. Full bearing specifications include 14 ball bearings. Equipped with drift tires as standard. Equipped with special mount space and gyro adjustment volume for the optional gyro unit (sold separately:MZW446). Technical Data ■Length 144.3mm ■Width 70.0mm ■Height 56.0mm ■Wheelbase 90.0mm(M) ■Tread F : 59.5mm R : 59.5mm ■Chassis MA-020-N ■Front Wheel Offset Narrow +1.5mm ■Rear Wheel Offset Narrow +1.5mm ■R/C System Syncro KT-531P Kit Content ● R / C unit built-in complete chassis ● Painted and marked complete body ● Syncro KT-531P transmitter ● Mini pylon ● Pinion gear (15T, 17T, 19T, 21T) ● Spur gear (27T, 29T, 31T) ● Spare nut ● Wheel wrench ● Pinion removal tool Requirement to Run ●AAA-size alkaline batteries x 4 or Ni-MH batteries x 4 for chassis. ●AAA-size alkaline batteries x 4 for transmitter

3.195,-

3.795,-

KJØP
-16%
The new Vapex Tech VTE1100AAA Series significantly extends the operation time of the devices with an enduring supply of battery energy, they are the most powerful and persistent rechargeable batteries designed to provide unparalleled battery support to bring out the best performance of popular digital devices. High Energy Density Long Cycle Life (more than 500 cycles) High Drain Performance (up to 3C) Fast Charge Performance (up to 2C)  Absolutely no Memory Effect Safety (Resealing Safety Vent) Diameter: 10.5 mm Length: 44.5 mm Weight: 13 g (each)  Content: 4xAAA 1100 mAh NiMH VTE batteries with storage case  

99,-

KJØP
Tailgate protector, blue/ 3x15mm flat-head screw (4)

49,-

KJØP
Telemetry GPS module 2.0, TQi radio system.  - Provides accurate speed data using GPS and GLONASS technology  - Plug and play installation  - Easy to read status LED Use with Telemetry Expander 2.0 (6550X).  Does not work with Telemetry Expander (6550)

1.095,-

1.195,-

KJØP
-8%
Wheelie bar, blue

299,-

KJØP
Battery hold-down/ mounts (front & rear)/ battery compartment spacers/ foam pads

129,-

KJØP
Key Features Take your MAXX® PowerStroke Shocks to the Next Level Tune your Spring Rates and Dial in your Suspension to the Conditions Three Different Upper and Three Different Lower Springs Allow for Nine Different Combinations   In The Box (2) Green Upper Springs 11.1 lbs./in. (2) Yellow (Stock) Upper Springs 12.5 lbs./in. (2) Red Upper Springs 14.1 lbs./in. (2) Green Front Lower Springs 4.4 lbs./in (2) Yellow (Stock) Front Lower Springs 6.4 lbs./in. (2) Red Front Lower Springs 8.8 lbs./in. Features Take your PRO636400 MAXX® PowerStroke Shocks to the Next Level Tune your Spring Rates and Dial in your Suspension to the Conditions Three Different Upper and Three Different Lower Springs Allow for Nine Different Combinations Overview This is a Spring Assortment for PRO636400 PowerStroke Shocks. Take your PRO636400 MAXX® PowerStroke Shocks to the next level by tuning them to match your specific needs with the optional Dual-Rate Front Spring Assortment pack! Mix and match the different upper and lower spring rates to dial in your suspension to the conditions. The three different upper and lower rates allow for nine different combined spring rate options. Get your pack of optional springs today! PRO636403 | Spring Assortment for MAXX® PowerStroke Shocks PRO636400 MAXX® is a registered trademark of Traxxas® L.P.   Fits PRO636400 Pro-Line PowerStroke Shocks for MAXX®

549,-

599,-

KJØP
-8%
Suspension screw pin set, front or rear (hardened steel), 4x18mm (4), 4x38mm (2), 4x33mm (2), 4x43mm (2)

69,-

KJØP
EC5 FEMALE (BATTERY END) (5PCS)

99,-

KJØP
DynoMAX 9310 Connector QS8-S Anti-Spark (8mm) Pair This is a heavy duty gold plated connector with built-in antispark resistors that are great for high powered electric models. The QS8-S connector gives you a constant charging of the capacitors on the ESC and allows the battery to be connected without sparks on your ESC when you first plug in. Features: HEAVY DUTY Built in Anti-Spark Function (5.1 ohm resistor) Not compatible with our EC8 connector Specs: Continuous Current: 110A Max Peak Current: 500A Max Wire Size: 6AWG (aprox 6-7mm dia of the exposed wire) Max outer dia of the wire insulation: 8.8mm Connectors: 8mm Gold Plated Brass Case Material: Fiber Reinforced Nylon Length (total assembled): 60.9mm Width: 29.7mm Height: 15.4mm Weight: 41.7g

159,-

219,-

KJØP
-27%
Chassis tray/ driveshaft clamps/ fuel filler (black)

59,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png