Hopp til innhold
-26%

Traxxas 2797 Mounts, suspension arm (rear) (0-degree) (l&r)

Art.nr: TRX 2797

29,-

39,-

- 26%
Traxxas

Traxxas

På lager: 1

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

ZERO-DEGREE (0) SUSPENSION ARM MOUNTS: Removes the rear toe-in built into the stock suspension. Use on high-traction surfaces only. These mounts will reduce stability on slippery surfaces. You can increase your truck's top speed for racing on high-bite tracks or drag racing by installing these 0 degree rear suspension arm mounts.

Produsent

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

This is a set of XXL shock shafts for the Traxxas shocks. Includes: Two shock shafts Features: hardened chrome/steel construction Specs: 2 1/8" long or 54mm          1/16" diameter or 1.5mm Requires: Extra long shocks Comments: These are threaded on one end, and have the slots for e-clips on the           other.

39,-

KJØP
This is a shock rebuild kit for 2 Traxxas black plastic shocks.  Includes: 4 E-clips   2 C-clips   2 O-rings   8 Washers   2 Diaphrams

35,-

KJØP
Glow Plug LC3 (Long-reach)

119,-

KJØP
This is the Sway Bar Wires Set for the Traxxas Slash 4x4 FEATURES: Steel construction           Black and silver for soft and hard INCLUDES: 2 front sway bars           2 rear sway bars REQUIRES: Installation on vehicle

99,-

KJØP
Gear set, metal (for 2070, 2075 servos) Developed for the TRX-4 RC Scale and Trail Crawler, the #2075X steering servo features all-metal gears for rugged, dependable service in extreme conditions. These same gears are now available to upgrade standard #2075 servos to the metal gear set. Upgrade your existing Slash, Summit, 4-Tec 2.0, E-Revo, or E-Maxx steering servos with this high-performance gear set. Replacing your #2075 servo gears is easier than ever with this all-inclusive kit. Installation should take about 15 minutes with only simple tools required. The included instruction sheet illustrates how the servo is constructed while the helpful installation video walks you through the process.  

249,-

KJØP
Fuel tank (75cc)/ rubber vibration cushions (2)

159,-

KJØP
      These are Replacement Steering Blocks and Wheel Spindles       for the Traxxas Nitro Rustler, Nitro Stampede, and Nitro Sport. FEATURES: Black Plastic Steering Blocks           Aluminum Wheel Spindles INCLUDES: Two Steering Blocks           Two Wheel Spindles REQUIRES: Traxxas Nitro Stampede, Nitro Sport, or Nitro Rustler.

89,-

KJØP
This is a set of optional caster blocks for the TRAXXAS TRX-3 2wd electric off road racing buggy. FEATURES: Made of white nylon           For 30° caster   INCLUDES: One left caster block           One right caster block   COMMENTS: These castor blocks mount onto the front A-arms and the steering           blocks mount onto the caster blocks.

55,-

KJØP
This is a set of original replacement caster blocks for the TRAXXAS TRX-3 2wd electric offroad racing buggy and the SRT stadium truck. FEATURES: Made of white nylon           For 25° caster   INCLUDES: One left caster block           One right caster block   COMMENTS: These castor blocks mount onto the front A-arms and the steering           blocks mount onto the caster blocks.

55,-

KJØP
Mounts, suspension arm (rear) (+/- 1-degree) (L&R)

25,-

KJØP
  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png