Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / Slash 2WD 2,4 ghz / Traxxas 2530-GRAY Bulkhead Front Gray
-11%

Traxxas 2530-GRAY Bulkhead Front Gray

Art.nr: TRX 2530-GRAY

79,-

89,-

- 11%
Traxxas

Traxxas
På lager: 4

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.
         The front suspension arm hinge pins pass through this piece.

FEATURES: Gray nylon construction

INCLUDES: One front bulkhead

REQUIRES: Nothing.  This is a direct replacement part.

SPECS:    Length: 73.6mm (2.90")
          Width: 41mm (1.62")
          Height: 29mm (1.14")

COMMENTS: This part is used on the following vehicles:
            Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,
            Rustler XL and Stampede XL.

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Hovedbilde RPM 73752 Front Bulkhead Black 1/10 Traxxas 2WD
RPM 73752 Front Bulkhead Black 1/10 Traxxas 2WD
Art.nr: 73752
Copied
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.    

179,-

KJØP
Hovedbilde Traxxas 2530A Bulkhead Front Gray
Traxxas 2530A Bulkhead Front Gray
Art.nr: TRX 2530A
Copied
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Gray nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

79,-

Ikke på lager
Hovedbilde RPM 73755 Front Bulkhead Blue 1/10 Traxxas 2WD
RPM 73755 Front Bulkhead Blue 1/10 Traxxas 2WD
Art.nr: 73755
Copied
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description: One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes:  RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.

169,-

KJØP
Hovedbilde RPM 73759 Front Bulkhead Red 1/10 Traxxas 2WD
RPM 73759 Front Bulkhead Red 1/10 Traxxas 2WD
Art.nr: 73759
Copied
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.    

159,-

KJØP
Hovedbilde RPM 73754 Front Bulkhead Green 1/10 Traxxas 2WD
RPM 73754 Front Bulkhead Green 1/10 Traxxas 2WD
Art.nr: 73754
Copied
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.

159,-

179,-

KJØP
-11%

Kunder kjøpte også

Hovedbilde Traxxas 3762 Black Shocks XX-Long (2)
Traxxas 3762 Black Shocks XX-Long (2)
This is a Pair of the Traxxas Black Shocks XX Long.               These shocks are used on the rear of many Traxxas                         electric and nitro vehicles. FEATURES: Replaces damaged or worn shocks.           Molded black plastic bodies.           Change the dampening rate (firmness) of each shock with different             widths of pre-load spacers. INCLUDES: Two Traxxas Black Shocks XX Long with springs, pre-load spacers of             four different widths, silicone oil, bodies and pistons. REQUIRES: Assembling, filling with oil and installing on vehicle. SPECS:    Length: 4-1/32" (102mm) fully extended           Length: 2-3/4"  (69.85mm) fully compressed           Diameter: 1/2"  (13mm)

215,-

KJØP
Hovedbilde Traxxas 3760 Black Shocks Long (2)
Traxxas 3760 Black Shocks Long (2)
This is a pair of replacement front shocks for the Traxxas Stampede and  Rustler trucks. The shock bodies are made of black plastic and there are four  spring pre-load spacers (to vary the spring tension) for each shock.   INCLUDES  Two UNASSEMBLED long front shocks with pre-load spacers  Two medium springs  One 1/2 ounce bottle shock oil (approx. 30 weight)   COMMENTS  Instructions are not included for assembling these shocks, refer to the  the truck kit instructions.

239,-

KJØP
Hovedbilde Traxxas 5116 Ball Bearings 5x11x4mm Revo (2)
Traxxas 5116 Ball Bearings 5x11x4mm Revo (2)
Disse lagerene er samme størrelse som Tamiya 1150 This is a 2 pack of 5X11mm Ball Bearings for the Traxxas Revo. FEATURES: Metal bearing construction           Blue rubber dirt shields INCLUDES: (2) 5X11mm ball bearings, Part #5116 SPECS:    Inside diameter:      3/16"      (5mm)           Outside diameter:     7/16"     (11mm)           Width:                5/32"      (4mm)

49,-

55,-

KJØP
-11%
Hovedbilde Traxxas 2640 Chrome Suspension Pin w/Clip 44mm (2)
Traxxas 2640 Chrome Suspension Pin w/Clip 44mm (2)
This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. Includes: two chrome  suspension pins and   three "E" type retaining clips. Requires:nothing parts are a direct replacement. Specs:3mm x 44mm  pins are notched for the 3MM "E" type retaining clips at each end.

29,-

39,-

KJØP
-26%
Hovedbilde Traxxas 2532 Fiberglass Tie Bar Hovedbilde Traxxas 2532 Fiberglass Tie Bar
Traxxas 2532 Fiberglass Tie Bar
This is a Firberglass Tie Bar by Traxxas for the SRT FEATURES: Fiberglass Construction INCLUDES: One Tie Bar REQUIRES: Suspension Pins TRX 2640 SPECS:    Length:  98.4 mm  (3.875")           Width:    7.9 mm  (0.3125")           Thickness:  2.0 mm (0.082") COMMENTS: None

49,-

59,-

Ikke på lager
-17%
Hovedbilde Tamiya 51530 TT-02 Motor Mount D Parts
Tamiya 51530 TT-02 Motor Mount D Parts
These are the D-parts to the TT-02 chassis platform. They contain the motor mount, gear cover and battery strap.   Feature: •For: Tamiya TT-02 •Material: Plastic •Color: Black Include: •Tamiya TT-02 Motor Mount D Parts (1 pc)

69,-

KJØP
Hovedbilde Hobbywing 30205150 SkyWalker 15A V2 ESC
Hobbywing 30205150 SkyWalker 15A V2 ESC
Hobbywing 30205150 SkyWalker 15A V2 ESC 2-3s 10g Kompakt Hobbywing Skywalker 15A V2 ESC. Perfekt regulator for små modeller og innendørsfly med 2-3S lipo. Dette er versjonen med 5V/2A BEC. Leveres med 2mm motorkontakter, kan programmeres med radio eller LED programboks. Krever batterikontakt. Spesifikasjoner Innspenning 2-3s LiPo BEC Output 5V@2A Kont/Peak 15A/30A Dimensjoner 38x17x5mm Vekt 10g

199,-

KJØP
Hovedbilde Zap PT105 Zap-A-Gap Single Use .01 OZ (5)
Zap PT105 Zap-A-Gap Single Use .01 OZ (5)
Perfekt for å ha i feltkassen og ypperlig for bruk ute i felten. Nå er det slutt på tørket lim da du virkelig trenger å lime. Her kommer medium Zap i porsjonspakninger som passer de fleste felt reparasjoner. No-Drip Tip STRONG PERMANENT BOND WORKS ON JUST ABOUT EVERYTHING PT105 Zap-A-Gap Single Use .01 oz (5) Zap’s most versitle product. Bonds virtually anything including wood (harder woods such as oak and plywood), veneers, rubber, leather, most plastics and oily surfaces. Gap filling qualities. Cures in 30 seconds or less. Accelerate the cure with Zip Kicker

59,-

KJØP
Hovedbilde Yeah Racing YA-0557RD Aluminum Plate Servo Saver Red Hovedbilde Yeah Racing YA-0557RD Aluminum Plate Servo Saver Red
Yeah Racing YA-0557RD Aluminum Plate Servo Saver Red
Yeah Racing Aluminum Plate Servo Saver Red #YA-0557RD Servo saver to protect your servos! Comes with an aluminum plate to minimise the slop associated with servo savers to a minimum! Three rows of holes means they can be used in a large variety of cars.   Features: For: Futaba, KO and Sanwa Servo Material: Aluminum/Plastic   Includes: Servo Saver (1 pc) Screws (2 pcs) Locknuts (2 pcs) Sanwa, Ko Servo Saver Plate (1 pc) Futaba Servo Saver Plate (1 pc)

239,-

259,-

KJØP
-8%
Hovedbilde Kestrel DPRRC031 R/C EP Glider 157cm Balsa ARF (w/o ... Hovedbilde Kestrel DPRRC031 R/C EP Glider 157cm Balsa ARF (w/o ...
Kestrel DPRRC031 R/C EP Glider 157cm Balsa ARF (w/o ...
PRODUCT INFO: Kestrel is designed as a sailplane for thermal flying or as an electric powered glider for gentle flying sessions, makes an ideal trainer for beginners. Kit contains two molded cowlings for sailplane as well as EP version. Assembling kit is fairly straight forward. Follow step by step instructions for an enjoyable building experience. Features: Factory assembled and covered Lightweight balsa and ply construction High quality laser-cut parts Assembly instructions included Molded canopy & cowling included Suitable for electric flight or glider Easy to complete and fly In the box: 1x Pre-built & covered fuselage 1x Pre-built & covered 2-piece wing set 1x Pre-built & covered tailplane 1x Pre-built & covered fin 1x Hardware pack (horns, hinges etc.) 1x Wing band pack 1x Comprehensive step-by-step instruction manual Specs: Flying Weight: 750-800 g Length: 930mm Wingspan: 1570mm Completion Level: Kit Experience Level: Beginner Assembly Time: 2-3 Hours (depending on experience) Recommended Usage Environment: Designated R/C model flying site Colour: White, Red and Blue Material: Wood Additional Parts Required: 4 Channel Radio 2212-1000KV Brushless Motor 15/30Amp ESC 3S 1300mah Lipo 8x6 Folding Electric Prop 2x Mini Servo Glue

1.295,-

1.395,-

KJØP
-7%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png