Hopp til innhold
Hjem / Reservedeler/Option-parts / Reservedeler Bil / Reservedeler etter Produsent / Traxxas El-Biler / Slash 2WD 2,4 ghz / Traxxas 2530-BLK Bulkhead Front Black
-11%

Traxxas 2530-BLK Bulkhead Front Black

Art.nr: TRX 2530-BLK

79,-

89,-

- 11%
Traxxas

Traxxas
På lager: 2

Produktet er midlertidig utsolgt. Dersom du ønsker å motta en epost når vi får det inn på lager, kan du legge igjen epostadressen din i skjemaet under.

Informasjon

This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.
         The front suspension arm hinge pins pass through this piece.

FEATURES: Black nylon construction

INCLUDES: One front bulkhead

REQUIRES: Nothing.  This is a direct replacement part.

SPECS:    Length: 73.6mm (2.90")
          Width: 41mm (1.62")
          Height: 29mm (1.14")

COMMENTS: This part is used on the following vehicles:
            Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,
            Rustler XL and Stampede XL.

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Relaterte produkter

 

Hovedbilde RPM 73752 Front Bulkhead Black 1/10 Traxxas 2WD
RPM 73752 Front Bulkhead Black 1/10 Traxxas 2WD
Art.nr: 73752
Copied
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.    

179,-

KJØP
Hovedbilde Traxxas 2530A Bulkhead Front Gray
Traxxas 2530A Bulkhead Front Gray
Art.nr: TRX 2530A
Copied
This is a Stock Replacement Front Bulkhead used in many Traxxas vehicles.          The front suspension arm hinge pins pass through this piece. FEATURES: Gray nylon construction INCLUDES: One front bulkhead REQUIRES: Nothing.  This is a direct replacement part. SPECS:    Length: 73.6mm (2.90")           Width: 41mm (1.62")           Height: 29mm (1.14") COMMENTS: This part is used on the following vehicles:             Rustler, Bandit, Stampede, Nitro Rustler, SRT, Nitro Stampede,             Rustler XL and Stampede XL.

79,-

Ikke på lager
Hovedbilde RPM 73755 Front Bulkhead Blue 1/10 Traxxas 2WD
RPM 73755 Front Bulkhead Blue 1/10 Traxxas 2WD
Art.nr: 73755
Copied
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description: One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes:  RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.

169,-

KJØP
Hovedbilde RPM 73759 Front Bulkhead Red 1/10 Traxxas 2WD
RPM 73759 Front Bulkhead Red 1/10 Traxxas 2WD
Art.nr: 73759
Copied
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.    

159,-

KJØP
Hovedbilde RPM 73754 Front Bulkhead Green 1/10 Traxxas 2WD
RPM 73754 Front Bulkhead Green 1/10 Traxxas 2WD
Art.nr: 73754
Copied
Front Bulkhead for most 1:10 scale Traxxas 2wd Vehicles Quick Notes: – replaces stock Traxxas #2530 & #2530A – fits the Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants) Description One of the most highly sought-after RPM parts is finally here! The RPM Front Bulkhead for 1:10 scale Traxxas 2wd vehicles is the ultimate in design, strength and durability. Our engineers reviewed the stock front bulkhead and found something curious. The stock front bulkhead does not sit flat, which can seriously affect suspension settings and adjustments! The RPM Front Bulkhead sits flawlessly level, meaning your front kick angle and A-arm angles will be perfect, providing a superior platform for precise suspension adjustments. We also cored out the bottom of the bulkhead. Why? First and foremost, it helps the bulkhead sit flat. Next, it significantly reduces the weight of the bulkhead. Our version is more that 15% lighter* than stock! By coring out the bottom of the bulkhead, it allows a convenient place to stick some modeling clay to adjust the weight bias of the truck. Leave the weight out if you want the front light; add it in if you want it heavier. We also include a handy dust plate to cover the bottom of the bulkhead on vehicles such as the Rustler, Stampede and Bandit that leave the bottom exposed. The dust plate prevents build-up of dirt and debris, which could affect the handling and weight of the truck. Each RPM Front Bulkhead is built from our bulletproof blend of engineering grade nylons, made right here in the USA and comes with our limited lifetime warranty against breakage. If you want strength you can count on and engineering you can trust, look no further than RPM! Tech Notes: RPM Front Bulkheads for 2wd Traxxas 1:10 scale vehicles are stock replacement parts and replace stock Traxxas #2530 & #2530A. This bulkhead fits the following vehicles: Slash 2wd, Nitro Slash, Bandit, electric Rustler, nitro Rustler, nitro Stampede & electric Stampede 2wd (including all Stampede 2wd variants). It does not fit the 4×4 versions of any of these vehicles.

159,-

179,-

KJØP
-11%

Kunder kjøpte også

Hovedbilde Traxxas 3632 Caster Blocks Left/Right
Traxxas 3632 Caster Blocks Left/Right
These are Castor Blocks for the Traxxas                              Rustler and Stampede. FEATURES: Black Plastic Construction INCLUDES: Two Blocks REQUIRES: Traxxas Rustler or Stampede COMMENTS: None

49,-

KJØP
Hovedbilde Traxxas 3640 Suspension Screw Pin Set Steel
Traxxas 3640 Suspension Screw Pin Set Steel
These are the Suspension Screws Pins for the                      Traxxas Rustler, Stampede and Bandit.            The hinge pins hold the suspension arms to the bulkheads FEATURES: Durable steel construction INCLUDES: Two 48mm pins           Two 34mm pins           Two 30mm pins           Two 28mm pins           Two 25mm pins REQUIRES: Installation on the Rustler, Stampede or Bandit

59,-

69,-

KJØP
-14%
Hovedbilde Traxxas 3760A Ultra Shocks Gray Long (2)
Traxxas 3760A Ultra Shocks Gray Long (2)
Denne passer til: -Bandit XL5/VXL foran. -Rustler XL5/VXL foran. -og til flere Traxxas biler. Sjekk manualen til din bil. This is a pair of the Long Ultra Shocks from Traxxas                       for the Bandit. FEATURES: Gray composite bodies           Preload spacers and two red springs INCLUDES: Two ultra long grey shocks with bottle of silicone             oil and assembly diagram REQUIRES: Assembly COMMENTS: Two pairs are required if replacing all shocks.  

259,-

289,-

KJØP
-10%
Hovedbilde Traxxas 2640 Chrome Suspension Pin w/Clip 44mm (2)
Traxxas 2640 Chrome Suspension Pin w/Clip 44mm (2)
This is a pair of chrome suspension pins used to hold the front suspension arms on the TRAXXAS SRT, NITRO STAMPEDE, and NITRO RUSTLER. Includes: two chrome  suspension pins and   three "E" type retaining clips. Requires:nothing parts are a direct replacement. Specs:3mm x 44mm  pins are notched for the 3MM "E" type retaining clips at each end.

29,-

39,-

KJØP
-26%
Hovedbilde Traxxas 2532 Fiberglass Tie Bar Hovedbilde Traxxas 2532 Fiberglass Tie Bar
Traxxas 2532 Fiberglass Tie Bar
This is a Firberglass Tie Bar by Traxxas for the SRT FEATURES: Fiberglass Construction INCLUDES: One Tie Bar REQUIRES: Suspension Pins TRX 2640 SPECS:    Length:  98.4 mm  (3.875")           Width:    7.9 mm  (0.3125")           Thickness:  2.0 mm (0.082") COMMENTS: None

49,-

59,-

Ikke på lager
-17%
Hovedbilde Traxxas 2941X Series 3 NiMH 7-Cell 3300mAh Hump w/iD ...
Traxxas 2941X Series 3 NiMH 7-Cell 3300mAh Hump w/iD ...
NB!! NB!! Denne overtar for TRX 2941, de som har den gamle Traxxas-pluggen kan fint bruke denne.   This is the Traxxas 8.4V 3300mAh Hump NiMH Battery Pack. FEATURES New high current connector with gold-plated copper terminals iD Auto Battery Identification allows Traxxas iD equipped chargers to automatically set and optimize charge settings MAXX cable high-efficiency 12 gauge silicone jacketed wire Sub C size cells INCLUDES 7-cell 8.4V 3300mAh iD Power Cell NiMH Hump NiMH Pack with High- Current Connector REQUIREMENTS NiMH compatible charger SPECIFICATIONS Length: 5.4" (138mm) Width: 1.9" (47mm) Height: 1.7" (42mm) Weight: 15.5oz (440g) Charge Rate: 3A

579,-

599,-

KJØP
-3%
Hovedbilde Traxxas 1834 Body Clips (12)
Traxxas 1834 Body Clips (12)
Disse passer Traxxas 1/16 biler.   These are Replacement Traxxas Body Clips.          They can be used on Traxxas or most other brands of cars. FEATURES: Metal clips are silver in color INCLUDES: Twelve body clips SPECS:    Length: aprrox. 7/8"  

25,-

35,-

KJØP
-29%
Hovedbilde Traxxas 3743P Steering Bellcrank Aluminium Pink
Traxxas 3743P Steering Bellcrank Aluminium Pink
Steering bellcranks, drag link (pink-anodized T6 aluminum)/ 5x8mm ball bearings (4) hardware (assembled). Accessory part for these models: Bandit VXL Bandit Ford F-150 Raptor Ford Raptor Nitro Slash Rustler VXL RustlerSlash VXL Slash

379,-

399,-

KJØP
-5%

SamiRC Norge AS

© 2026 SamiRC Norge AS - Powered by Mystore.no

Om oss

  • SamiRC Norge AS
  • Nils Lauritssøns vei 34
  • 0870 OSLO
  • Org. nr. MVA 928 644 979 Foretaksregisteret
  • Tlf: 46760019
  • post@samirc.no

Kundeservice

Nyhetsbrev

  • klarna-dark.png
  • vipps-orange.png
  • mastercard-full.png
  • visa.png
  • paypal.png