Traxxas

-9%

Traxxas 2445 Turnbuckle 55mm Complete (2)

Art.nr: TRX 2445

99,-

~~109,-~~

- 9%

Traxxas

Traxxas

På lager: 3

Du vil motta en e-post så snart produktet er på lager!

En feil har oppstått. Prøv igjen

Informasjon
Produsent

Informasjon

Turnbuckles, toe link, 55mm (75mm center to center) (2) (assembled with rod ends and hollow balls)

Produsent

Traxxas

Traxxas

Dette er den beste merket for RC-BIL i hele Norge, nei vi kan vel si hele verden uten å trenge å være redd for at vi sier noe galt!

Kunder kjøpte også

Hovedbilde

"Bulk" Traxxas 2437 Front Axles Bandit

*** This is a Brand new item taken from a kit (chopped part), therefore will not have a Traxxas packaging *** "Bulk" Traxxas 2437 Front Axles Bandit This is a pair of Front Axles for the Traxxas Bandit Buggy Kit and the Ready To Run version. FEATURES: Constructed of steel. INCLUDES: Two Front Axles for the Traxxas Bandit Buggy Kit and Ready to Run Version SPECS: Length: 0.94" (24mm) Length of threaded area: 0.14" (3.5mm) Thread size: 0.16" (4mm) REQUIRES: Placing each axle into the Steering Blocks TRX 3636, and installing Stub Axle Pins TRX 2754.

39,-

Hovedbilde Traxxas 5833 Nerf Bars LCG Black (Pair) Slash 2WD

Traxxas 5833 Nerf Bars LCG Black (Pair) Slash 2WD

Traxxas 5833 Nerf Bars LCG Black (Pair) Slash 2WD These are the Low CG Nerf Bars in Blue for the 1/10 scale 2WD Traxxas Slash. FEATURES Plastic construction, Black in color For use with the Low CG chassis in Black, or Blue Fastens to sides of chassis to absorb impacts INCLUDES Two Nerf Bars

49,-

Hovedbilde Traxxas 5832 Chassis LCG Slash 2wd Black (1)

Traxxas 5832 Chassis LCG Slash 2wd Black (1)

Chassis, low CG (black)

229,-

249,-

-8%

Hovedbilde Traxxas 5831 Lower Chassis Low CG Black

Traxxas 5831 Lower Chassis Low CG Black

This is the Lower Chassis for use with the optional Traxxas #5830 Slash 2WD Low CG Conversion Kit. FEATURES Plastic construction, black in color Fastens under front section of low CG chassis INCLUDES Lower Chassis in Black SPECIFICATIONS Length: 5.6" (142mm) Width: 3.1" (79mm) at widest point COMMENTS Must be used with the #5830 Low CG Conversion Kit. Will not fit on stock Slash 2WD chassis.

79,-

89,-

-11%

Hovedbilde Traxxas 2531X Suspension Arms Front (2)

Traxxas 2531X Suspension Arms Front (2)

Denne erstatter TRX 2531 These are the Replacement Front Suspension Arms for many Traxxas kits. These are located on the front bulkhead and are held on by suspension pins. FEATURES: Nylon construction Black in color INCLUDES: Two black nylon suspension arms REQUIRES: Assembly onto kit. SPECS: Length: 3" Width: 1.2" COMMENTS: This will work on the Bandit, Nitro Stampede, Nitro Rustler, SRT, and the Nitro Sport.

129,-

Hovedbilde Traxxas 3740 Pins 2.5x31.5mm Rustler (2)

Traxxas 3740 Pins 2.5x31.5mm Rustler (2)

This is the 2.5x31.5mm Pins with E-clips. FEATURES: Made of stainless steel This is used to hold the front steering block (TRX 3636) to the castor block ((TRX 3632) on the electric (not Nitro) Rustler Also called the vertical kingpin INCLUDES: 2 Pins (kingpins) 4 2.5mm e-clips

29,-

Hovedbilde Traxxas 3636 Steering Block (2)

Traxxas 3636 Steering Block (2)

Traxxas Bandit. They are made of black reinforced nylon and are what the front axles go through. Steering blocks, left & right (2) (requires 5x11x4mm bearings) PACKAGE INCLUDES: Two steering blocks (one left and one right)

39,-

Hovedbilde Traxxas 2432 Caster Blocks Left/Right

Traxxas 2432 Caster Blocks Left/Right

These are Left and Right Caster Blocks for the Traxxas Bandit XL5 . Traxxas Bandit VXL Traxxas Drag Slash 1967 Chevrolet® C10 Truck Traxxas Drag Slash Ford® Mustang® 5.0 On the other cars it is TRX 3632 that fits. FEATURES: Black Plastic Caster Blocks INCLUDES: One Left Block One Right Block REQUIRES: Traxxas Bandit COMMENTS: None

49,-

59,-

-17%

Hovedbilde Traxxas 2750R Suspension arms, long (rear)

Traxxas 2750R Suspension arms, long (rear)

Suspension arms, long (rear) for Traxxas Bandit.

95,-

Hovedbilde Traxxas 3752 Stub Axle Carriers (2)

Traxxas 3752 Stub Axle Carriers (2)

This is a pair of Stub Axle Carriers for the Traxxas Bandit, Stampede and Rustler VXL. FEATURES: Molded nylon construction (black) INCLUDES: Two stub axle carriers REQUIRES: Installation on the vehicle

39,-

Hovedbilde Traxxas 3767P Shock caps, aluminum (pink-anodized) ...

Traxxas 3767P Shock caps, aluminum (pink-anodized) ...

Shock caps, aluminum (pink-anodized) (4) (fits all Ultra Shocks) Accessory part for these models: Bandit VXL Bandit E-Maxx Brushless E-Maxx Ford Fiesta® ST Rally Ford Raptor Nitro 4-Tec Nitro Rustler Nitro Slash Nitro Sport Nitro Stampede Rally VXL Rustler VXL Rustler Slash 4X4 Platinum Slash 4X4 Ultimate Slash 4X4Slash VXL Slash Stampede 4x4 VXL Stampede 4x4 Stampede VXL Stampede T-Maxx Telluride 4x4 Bandit VXL Bandit Bigfoot® No. 1 Officially Licensed Replica Bigfoot® Officially Licensed Replica Craniac® Ford F-150 Raptor Rustler VXL Rustler Skully Slash VXL Slash Stampede VXL Stampede

179,-

189,-

-5%

Hovedbilde Traxxas 2531A Suspension Arms Front HD Black (2) Drag ...

Traxxas 2531A Suspension Arms Front HD Black (2) Drag ...

Suspension arms, black, front, heavy duty (2) (requires #3632 series caster block and #3640 screw pin set)

129,-

Hovedbilde Hitec 57347 Servo Extension 36

Hitec 57347 Servo Extension 36"

This is a 36" Servo Extension from Hitec. FEATURES: 36" long with universal connectors INCLUDES: One Servo Extension SPECS: Length: 36" (91.4cm)

59,-

Hovedbilde Hitec 57215 S High Channel Switch Harness With RX ...

Hitec 57215 S High Channel Switch Harness With RX ...

High Channel Switch Harness With RX Charger Cord

89,-

Hovedbilde DynoMax B9524 Servo Connector JR/Universal gold plated ...

DynoMax B9524 Servo Connector JR/Universal gold plated ...

Servo Connector JR/Universal gold plated pair

24,-

Hovedbilde Traxxas 3234 Screws 2.5x14mm cap-head machine (hex ...

Traxxas 3234 Screws 2.5x14mm cap-head machine (hex ...

Screws, 2.5x14mm cap-head machine (hex drive) (6)

39,-

Hovedbilde Hitec 54605 Aileron Extension 24

Hitec 54605 Aileron Extension 24"

This is a Heavy Duty 24" Servo Extension with Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer. On one end of the wire is a male connector and on the other end of the wire is a female connector. FEATURES Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan. Heavier, 20-gauge wire handles higher current loads. INCLUDES One 24" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style Connectors SPECIFICATIONS Wire Gauge: 20

59,-

Hovedbilde Hitec 54611S Heavy Gauge Twisted Wire Aileron ...

Hitec 54611S Heavy Gauge Twisted Wire Aileron ...

This is a Heavy Duty 24" Twisted Wire Servo Extension with Hitec-S, JR, Airtronics-Z Connectors. This extension goes between the receiver and the servo to make the wire longer. On one end of the wire is a male connector and on the other end of the wire is a female connector. FEATURES Gold-plated teminals improve conductivity and prevent oxidation for longer lifespan Heavier, 20-gauge wire handles higher current loads Twisted wire design cuts down on electro-magnetic noise (EMI) which can cause radio interference INCLUDES One 24" Long Servo Extension w/Hitec-S, JR, Airtronics-Z Style Connectors SPECIFICATIONS Wire Gauge: 20 Wire Color Codes- JR- Hitec- Airtronics Z- Brown: ground Black: ground Black: ground Red: positive Red: positive Red: positive Orange: signal Yellow: signal Blue: signal

89,-

Hovedbilde Traxxas 1552 Hex Motor Screws (4)

Traxxas 1552 Hex Motor Screws (4)

These are replacement motor screws and washers for any 05 size motor. Features: 6 3x8mm socket head screws 6 3mm washers 1 Hex allen wrench

39,-

Hovedbilde Traxxas 2431 Pinion Gear 48P 31T w/Screw

Traxxas 2431 Pinion Gear 48P 31T w/Screw

This is a 31 Tooth, 48 Pitch Pinion Gear with Set Screw from Traxxas. FEATURES: Steel construction, silver in color INCLUDES: One 31 Tooth, 48 Pitch Pinion Gear One 3x4mm Set Screw (1.5mm hex size) REQUIRES: Installation SPECS: Length: .42" (10.5mm) Inside Diameter: 1/8" Outside Diameter: .69" (17.5mm)

39,-

49,-

-20%

Hovedbilde Traxxas 1815 Body Washers (8)

Traxxas 1815 Body Washers (8)

This is the Traxxas replacement Body Washers. FEATURES: Nylon construction Helps prevent the body mount hole from cracking prematurely White in color SPECS: Outer Diameter: 0.87" (22mm) Inner Diameter: 0.26" (6.7mm) INCLUDES: Eight large body mount washers

29,-

Hovedbilde Traxxas 2746 Metal Washers 3x6mm (12)

Traxxas 2746 Metal Washers 3x6mm (12)

These are 3x6mm Washers from Traxxas. FEATURES: Metal construction INCLUDES: (12) Washers SPECS: Size: 3x6mm

25,-

30,-

-17%

Hovedbilde Traxxas 4676 Spur Gear 48P 76T

Traxxas 4676 Spur Gear 48P 76T

This is a 48P, 76T Spur Gear for models with Traxxas Torque Control Slipper Clutch. FEATURES: 48 pitch 76 tooth Designed for models with a slipper clutch. Black plastic construction INCLUDES: One spur gear SPECS: Pitch: 48 Tooth: 76

39,-

Hovedbilde Traxxas 2473 Wheels Tracers 2,2

Traxxas 2473 Wheels Tracers 2,2" Chrome 2WD Front (2)

Wheels, Tracer 2.2" (chrome) (2) (Bandit front) These 2.2" wheels for Bandit fit Traxxas and other standard 2.2" buggy tires. Tracer 2.2" wheels are available in a shiny mirror-chrome or sinister black-chrome.

99,-

Hovedbilde Traxxas 4607 Ball Bearing 5x11x4mm (8)

Traxxas 4607 Ball Bearing 5x11x4mm (8)

Ball bearings (5x11x4mm) (8)

289,-

319,-

-9%